2000 kw gas used for sale

TO WHOM AT MAY CONCERN ; WE VE NEW UNUSED 3 SETS NAPIER NA 307 GAS INLET& OUTLET CASINGS AND INLET ELBOWS AT OUR STOCK. 3 SETS GAS INLET & OUTLET CASINGS ARE NEW AND NEVER MONTAGED . PLS REFER SOME PICTURES ON ATTACHE IF YOU VE ANY QUESTIONS . PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Subject: Pre-Owned Power Plant – Jenbacher JGC 312 GS-L Engine – 625 kW – Complete Equipment Dear Sir or Madam, We are pleased to offer for sale a complete power plant, fully operational and ready for use, comprising the following: 1. Engine Container 40 ft Jenbacher JGC 312 GS-L (Equip2 D4UN Masterpack NW12 H1) – nameplate year 2009 at 40.000 hour , overhauled in 2018 Power output: 625 kW Stamford alternator – continuous power 765 kVA Equipment included: DIA.NE TX control panels, silencer, heat exchanger, exhaust, control cabinet Roof fitted with a skid comprising: plate heat exchanger, flue gas heat exchanger, silencer 2. Electrical Container 40 ft Room equipped with electrical cabinets and a delivery substation Transformer 800 kVA – 20 kV / 400 V Roof-mounted air heater skid Price for the complete plant: €50,000 (ex-VAT), ex-wor ...

SUMERA MOTOR SMG-100LG-S gas generator was built in 2018 in Poland by SUMERA MOTOR Sp. j. The machine, which is powered by natural gas, ensures uninterrupted operation of machinery and industrial systems in the event of power cuts or in conditions where electricity cannot be supplied. All components of the machine, including the 100 kVA motor, are located inside a soundproof enclosure that significantly reduces noise levels. The SMG 100LG-S generator weighs 1690 kg. Technical specifications of the SUMERA MOTOR SMG-100LG-S gas generator - fuel type: natural gas - rated power: 100 kVA (80 kW) - rated current: 144.6 A - rated voltage: 230/400 V - rated frequency: 50 Hz - rated power factor: 0.8 cosφ - performance level: G3 - degree of protection: IP 44 - maximum operating temperature: 40°C - weight of the SUMERA MOTOR machine: 1690 kg

Gas Engine Generator Set (CHP/BHKW) Waukesha 16V150LTD for natural gas Serial number 700036 Stamford generator P.I734C2 400V/231V50Hz, 1327 KVa 1785 Amp year 2009 Serial number C265013/1 Scope of delivery: - Generator set - Control panel - Gasline section as displayed

core engine Centaur 50. The turbine and associated gearbox have been completely base overhauled after last operating and are a ready-to-install for a zero-hour turbine exchange. After the overhaul, there was no active operation / no installation. The turbine and gear box Sale Solar Centaur 50 Base overhauled core engine: Manufacturer Solar Turbines - Type CENTAUR 50 SoLoNox - Year of construction 2022 Zero-hour core turbine and gearbox - Electrical output 4,040 kWel - Speed 14,944 rpm 50Hz - Fuel Natural gas H - Design temperature 15° C - Turbine inlet temperature 665 °C (1.229 °F) - Gearbox with zero operating hours - Turbine control Solar TTS4

Power: 5000 kVA / 4000 kW Year of construction: 12/1992 Current: 275 A Voltage: 10.5 KV Frequency: 50 Hz Rotation: 1500 rpm Weight: Approx. 13.6 to. Protection class: IP 23 In 2017/2018, the following work was carried out: Stand winding in insulation class F completely renewed Inductor finely balanced and refurbished at nominal speed Reman refurbished plain bearings Other parts overhauled Tested and test run 2019 Prior sale reserved - errors possible

Recon Part number: 1230 0571 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Key data: 800 KW, 1000 kVA, 400 V

NEW/Surplus MWN 3016 V 16, 800 kW, 400v. 50 Hz. CHP Enclosed Natural Gas Generator Set Rating: 800kW, Electric Power: 800kWe Power factor (cos. phi): 1.0, 400 Volts, 3Ph, 50Hz, 1500 Rpm Altitude: max 1100m a.s.l., Ambient temperature: +5 up to +53 degC Engine: MWM 3016 V 16, 16 cylinders in V, water cooled, turbo charged with intercooler Alternator: 800kW / 400V synchronous, 3 phases, brushless, self-exciting, self-regulating, air cross flow ventilated, protection mode IP23, engine flywheel and generator shaft coupled, engine and generator coupled over SAE flange and fixed to one unit, genset mounted with vibration dampers. Control unit MMC consisting of: Electronic speed regulation for the engine,  Cos. phi regulation for the engine, Complete engine monitoring and control, Complete generator monitoring, Display of all relevant data (voltage, frequency, power, temperatures, oil pr ...

FOR SALE – 2 x Jenbacher J320 GS B05 We offer two Jenbacher J320 gas engine units in excellent working condition: Power Output: 1,064 kW each Fuel Type: Natural Gas Speed: 1,500 RPM – 50 Hz Control System: DIANE XT4 Voltage: 400 V Alternator: STAMFORD Running Hours: approx. 53,000 hours each Maintenance: All maintenance performed by official Jenbacher service Available for immediate sale. Site visits available, including endoscopic inspection. More pictures and detailed technical information can be provided upon request. For further details or to schedule a visit, please contact: Cogeneración Técnica Energética ctenergetica.com +34 674945249

Machine type MIG/MAG welding system MerkLE brand Type M 254 K Connection voltage 3 x 400 Volt Setting range 25 – 250 amps Duty cycle 60 % ED at 250 Ampere 100% ED at 200 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 955 x 460 x 780 mm Weight 110 kg Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 months warranty! 1 piec ...

Machine Type Electrode Inverter Welding Rectifier with bi-power setup Merkle brand Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Setting range 20 – 280 amps Duty cycle 35 % ED at 280 Ampere 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable weldable material thickness 7 mm Cooling inverter by built-in fan Special accessories Bi-Power setup Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 6 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece of ...

Key data: 2800 KW

ANNOUNCEMENT – WAUKESHA 16V AT27GL ENGINES & KATO GENERATORS FOR SALE Available for sale: three Waukesha 16V AT27GL natural gas engines, plus three KATO 3606LVA generators and Aalborg AV-4 heat-recovery boilers. These units offer proven durability and efficiency, ideal for power generation and industrial applications. Waukesha 16V AT27GL Engines – Key Information Engine 1 – Serial C-94476/1 Hour Meter: 79,928 h Maintenance: 36K Plus at 52,000 h (2021) and 8K (2025) Pending: 72K Status: Operational Turbochargers: 12K service (2025) Engine 2 – Serial C-94534/1 Hour Meter: 84,152 h Maintenance: 8K (2025) Pending: 72K + main gas valve replacement Turbochargers: require 50K overhaul Status: Operational Engine 3 – Serial C-94476/2 Hour Meter: 67,122 h Maintenance: 72K at 66,000 h (2024) Pending: liner replacement + main gas v ...

Key data: 2000 KW, 1500 1/min

Brand New Containerised MTU 16V4000L64FNER Natural Gas Generator Sets Brand new MTU 16V4000L64FNER containerised natural gas generator sets are available. This high-efficiency, low-emission MTU Series 4000 power modules deliver dependable performance for continuous, prime, or standby operation across industrial, commercial, and CHP (Combined Heat and Power) applications. Each unit is factory-assembled and tested in a 40ft ISO High Cube container, integrating the engine, alternator, cooling, ventilation, exhaust, and control systems—ensuring rapid installation and plug-and-play operation and can be delivered anywhere through road, sea or railway transportation. Key Specifications & Features Engine: MTU 16V4000L64FNER, 4-stroke, V16 lean-burn natural gas engine Power Output: Up to 2800 kVA Container Design: Weatherproof, sound-attenuated 40ft High Cube I ...

TO WHOM IT MAY CONCERN; WE VE GENUINE 3 PCS MAN NR 34 / S 114. COMPLETE EXHAUST GAS TURBOCHARGER WITH SILENCER AT AT OUR STOCK. IT IS OVERHAULED & TESTED ON TRIAL ENGINE OPERATION . PLS FIND SPECT AT BELOW. TYPE NR34 / S 114 SERIAL NO SMM0965 t max . 650 C n max 26300 1/min YOB 2012 -09 . MADE IN MAN ENTPACO IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Agilent 5975C XL inert MSD with Agilent GC 6890 N GC Agilent 6890 N, Injector Split/Splitless, MSD 5975 C inert XL with EI,Turbopump,Fastscan Edwards Backing Vacuum Pump 1.5 Agilent Productivity Chemstation E02.02 on PC/Win 10 complete with all cables, Option: Agilent Liquid Sampler, Sampler/ CTC or Gerstel MPS 2) The system is ready for installation and ready for operation current service Installation at extra charge on request

FOR SALE NEW- UNUSED WARTSILA COMPLETE EXHAUST GAS TURBO CHARGER . TO WHOM IT MAY CONCERN ; WE VE NEW UNUSED WARTSILA ST 6 COMPLETE EXH GAS TURBO CHARGER WITH ORIGINAL PACKAGE AT WOODEN BOX AT OUR STOCK . FOR YR GUIDENCE IT IS KBB HPR 6000 PLS REFER ATTACHED PICTURES. PLS FIND SPECT AT BELOW. TYPE ST 6 SPEC 7601068 n max 32900 mın t max 650 C Serial 00566 / 17 YOB. 2017 WEIGHT 466KG MADE IN THE EU EX OWNER SUPLIED FROM WARTSILA. TURBOCHARGER READY TO TRANSPORT. IF YOU ARE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently maintained/with warranty Installation on request

Key data: 750

(Deutz) MWM2016 V16 Natural Gas Generator Set. Model: (Deutz) MWM2016 V16 Fuel: Natural Gas Year: 2007 Hours: 40,460 Capacity: 750 kW Hz: 50 Voltage: 400 V Scope of supply: Complete containerised genset including Engine, Marelli Generator, Frame, Control System, Gas Line, Radiator, Gas Filter and other accessories. Complete contarised genset. Very good condition. Turnkey ready to run now. A new crank was installed on 35,000 hrs. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Key data: 1600 KW, 400 V

CHP Power Plant 800 kWe with 2 × MWM TCG 2016V08 Gas Gensets Combined Heat and Power (CHP) plant with 800 kWe / 400 V / 50 Hz output, designed to operate on natural gas or biogas. The plant was originally delivered by MWM in 2011 and remained in operation until 2021. It has low operating hours and is in good technical condition. Thermal energy is recovered as hot water at 90°C, currently utilized for district heating. Due to limited biogas availability, the plant typically ran at 30–40% load and not in continuous 24/7 operation. The facility includes a complete gas treatment and mixing system to handle landfill gas with a methane content of 40–55% CH₄. The power generators are housed in two soundproof containers, while the TEAM Evo MWM power plant control system, electrical switchgear, and control cabinets are installed in a separate control room. The heat recovery syste ...

1. EQUIPMENT OVERVIEW SIEMENS SGT-500 GAS TURBINES Quantity: Two (2) Units Available Condition: New Surplus / Zero Hours Manufacturing & Storage • Manufactured in 2007 • New surplus, never used • Zero operating hours • Stored strictly in accordance with OEM preservation procedures • Originally supplied for an FPSO project that was cancelled Certification • Marine Rated • DNV (Det Norske Veritas) certified 2. GAS TURBINE – TECHNICAL DATA • Model: Siemens SGT-500 • Configuration: Single-shaft industrial gas turbine • Fuel: Dual fuel – Natural Gas / Diesel • Frequency Capability: 50 / 60 Hz Power Output (ISO conditions – indicative) • Natural Gas: approx. 17.4 MW • Diesel: approx. 17.0 MW (Output may be slightly higher depending on site conditions) Performance • Specific Fuel Consumption • 221 g/kWh (Na ...

Machine type MIG/MAG welding system MerkLE brand Type M 210 K Connection voltage 230/400 volts Setting range 25 – 210 amps Duty cycle 15 % ED at 210 Ampere 60% ED at 80 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 855 x 390 x 585 mm Weight 75 kg Special accessories point and interval device Adapter for 230/400 V Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white  ...

Machine type MIG/MAG welding system Eurotronic brand Type MAG 3000 EC Connection voltage 3 x 400 Volt Setting range 30 – 300 amps Duty cycle 35 % ED at 300 Ampere 60% ED at 230 amps 100% ED at 190 amps Current setting 12 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-roller drive Fuse 16 amps Dimensions L x W x H 860 x 490 x 650 mm Weight 78 kg Age approx. 5 years Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, kpl. Equipped 1 pair of welding gloves 1 piece instruction manual  ...

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 190 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex ...

Machine type MIG/MAG welding system equipped for steel wire in 1.0 mm Rehm brand Type RD 250 Connection voltage 3 x 400 Volt Setting range 35 – 250 amps Duty cycle 40 % ED at 250 Ampere 60% ED at 210 amps 100% ED at 170 amps Current setting 10 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive Fuse 16 amps Dimensions L x W x H 900 x 465 x 855 mm Weight 81 kg Age approx. 15 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 11 ...

MWM TCG 2020 V 12 (ready to install) MN: 2204405 Circumference: - Crankcase incl. new bearing - Crankshaft (Std-Maß) incl. new bearing - Camshaft (12301190 / 12301191) incl. new bearing - Wheel operation incl. wheel box lid - Flywheel housing - Oil pump with oil suction pipe - Oil pan - Pestle (12453142) - Oil pressure valve On request, the scope can be extended (e.g. pistons, liners, cylinder heads, etc.) The offered part motor can also be used as TBG 620. The engine is not sold as a replacement engine. Measurement protocols are included. Please contact us for a written quote.

Key data: 1500

2 x JENBACHER Jen 420-GS-B25 Biogas Generator Set Model: Jen 420-GS-B25 Fuel: Biogas Year: 2012 Hours: 85,000 Capacity: 1,500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system, Gas line, generator switch and other accessories. Service History Status: Rebuild done at 60,000h Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Available for sale 1 x 260 kW Gas genset Guascor SFGLD 180. Unit prepared to work in isle mode. The genset is in our installations and is in great working conditions.

Available for sale 1365 kW MWM TBG 620 V16 inside container. Equipment in good working conditions.

Available for sale 1 x 3500 kW MWM TBG 632 V16. Equipment in good working conditions.

Available for sale 1365 kW MWM TBG 620 V16 K. Equipment in good working conditions.

Available for sale 1400 kW MWM TBG 620 V16 K. Equipment in good working conditions.

SALES PROPOSAL GAS TURBINE PACKAGE – SOLAR TAURUS 70 1. General Information Equipment: Industrial Gas Turbine Package Manufacturer: Solar Model: Taurus 70 – 10302S CS/MD Stand Core Turbine Year: 2019 Package Year: 1997 Condition: Used – Good Operating Condition 2. Technical Specifications • Output: 8,500 kVA • Frequency: 50 Hz • Voltage: 11,000 V • Alternator: LS – 6,300 V • Fuel Type: Natural Gas 3. Operating Data • Total Package Hours: 14,517 hours • Number of Starts: 127 • Next Planned Major Overhaul: 30,000 running hours • Borescope Inspection: Completed in 2024 (report available upon request) 4. Key Advantages ✔ 2019 Core Turbine (recent upgrade) ✔ Low number of starts ✔ Recent borescope inspection ✔ Suitable for 50 Hz industrial power generation ✔ Natural gas operation 5. Commercial Terms • Availability: To be con ...

Manufacturer: CATERPILLAR Model: G3516B LE Type: Stationary to Gas Working Cycle: 04 times water cooled Nominal Rotation: 1,800 RPM Number of Cylinders: 16 Cylinders, arranged in V Piston diameter --mm: 170 mm Piston stroke -mm: 190 mm Engine Volume: 69 Liters Compression Ratio: 11.1:1 Suction: Turbocharged, Post-Cooled Fuel System: Electronic Ignition System Quantity: 02 units

Key data: 1030 , 400

Available full gas natural power plant of Caterpillar 3516 (1030kW) from 2004 with 70606 hours of working. All the maintenances has been done by official service following the official schedule. The engine stopped working perfectly at full load. Full boroscope inspection is available. Scope of Supply: -Genset -Gas train -Control Panel -Switch braker (alternator + transformer) -Exchanger -Silincer -Refrigeration System (HT Aerofan and LT refrigeration tower) -Oil system The assets are already dismounted on our wharehouse ready to be load or to be inspected. For more information please contact us!

Key data: 2500 KW, 3125 kVA, 13800 V

Five (5) Quality Used Mobile Caterpillar G3520, 2.5 MW, (Each) 13.8 kV, 60 Hz. Enclosed with Trailer Chassis. · Caterpillar G3520, 2.5 MW, 3125 kVA Continuous, 13,800v. 60 Hz. Natural Gas Generator sets. · Charging Alternator, 24v. 50 amps. · NLA-EPA Certification 1 Gram/BHP-Hr · Generator End Arrangement 3042 Permanent Magnet, 105°C Temperature rise over 40°C Ambient temperature. · Jacket Water Heater 480v. · NLA Electric Prelube Pump · EMPC 4.4 Control Panel · 53” Sound Attenuation Enclosure · Quadruple Axel Trailer Chassis · Cooling System · Exhaust System · Air Filters · Duplex Oil Filters · Fire Suppression Tanks · 24v. Battery Charger · Mobile Natural Gas Generator Sets · Plug & Play · MANUFACTURING YEAR 2023 & 2024 Units are ready for shipment.

Available in stock 2 x Used RMG Solenoid Gas Valves DN65 PN16, model 01-EVA 25 NH-4. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 1 x Gas Filter DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. VDC: 24 Power: 70 W Maximum Inlet Pressure: 0.1 bar Environment Temperature: -20ºC to +60ºC

Viessmann Vitoplex 200 oil/gas boiler 900 kW with Weishaupt gas burner Manufacturer: Viessmann Model: Vitoplex 200 Type: Oil/Gas Boiler Nominal heat output for oil and gas: 900 kW Rated rated heat output: 978 kW Boiler capacity: 1325 l Permissible operating pressure: 6 bar Permissible operating temperature: 110 °C Standards: EN 14394 / TRD 702 / TS EN 303-1 / TS EN 303-3 Location: Paderborn Burners: Manufacturer: Max Weishaupt GmbH Burner type: WM-G10/4-A monarch Design: ZM Serial Number: 40457248 Year of manufacture: 2018 Country of destination: DE Category: II2R3R Gas Type: N Power range: min. 110 kW / max. 1250 kW Connected pressure: min. 100 mbar / max. 2500 mbar NOx class: 2 Control voltage: 230V 1~50Hz Mains voltage: 400 V 3~ N PE 50 Hz Electrical power: 2.16 kW Degree of protection: IP54

Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16

Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Machine type MIG/MAG welding system Brand Rehm Type Magnum 182 Supply voltage 230/400 volts Setting range 30 – 180 amperes Duty cycle 25 % ED at 180 amps 60% ED at 140 amps 100% ED at 100 amps Current setting 6 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 16 Ampere Special device 2-stroke/4-stroke Points/Interval Dimensions L x W x H 760 x 320 x 580 mm Weight 53 kg Age approx. 20 years Condition workshop tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg, 8.0 mm Ø 1 can non-stick spray 1 piece hand shield 1 piece protect ...

EKU PXL 80M Lava stone grill EKU PXL 80M Lava stone grill Stand-alone unit Height-adjustable stainless steel V-grill grate W 800 x D 750 x H 850 mm 2 heating zones Piezo ignition Substructure open V-rust 17 kW Gas More lava stone crickets in other sizes - new and used - can be found in our shop! International shipping costs on request!