2000 kw gas used for sale

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with single-axle turntable steering -Platform: 7015/2000/H730 mm -Load capacity: 16 t -Tires: Solid rubber dual tires, see photos -Overall dimensions: 8675/2000/H730 mm -Transport dimensions: 7015/2000/H730 mm -Weight: 1940 kg

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with single-axle turntable steering -Platform: 7000/2000/H730 mm -Load capacity: 15 t -Tires: Solid rubber dual tires 425/150-305 see photos -Overall dimensions: 8665/2000/H730 mm -Transport dimensions: 7000/2000/H730 mm -Weight: 1940 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: MAFI, heavy-duty transport wagon with single-axle turntable steering -Platform: 5160/2000/H680 mm -Load capacity: 16 t -Tires: Solid rubber dual tires 425/150-305 see photos -Overall dimensions: 6830/2000/H680 mm -Transport dimensions: 5160/2000/H680 mm -Weight: 1460 kg

Clamping plate with T-slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: Mounting plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 1295 x 2000 mm -Sheet height: 90 mm Solid, planed underside -Groove width: 27 mm -Dimensions: see drawing in the photos -Overall dimensions: 1295/2000/H90 mm -Weight: 1587 kg

Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with support ribs, on a solid base cabinet -Length: 2000 mm -Width: 1420 mm -Plate: with supporting ribs, plate thickness 35 mm -Base cabinet: 6 cabinet doors / shelves (see photos) -Overall dimensions: 2000/1420/H920 mm -Weight: 1080 kg

Manufacturer: Cefla, Type: Easy 2000, Year: 2006, Work piece width min-max mm: 10-1300, Work piece hight min-max mm: 10-60, Work piece length min-max mm: 100-3000, Overall length metre: ca.25, Feeding speed m/min: 3-5, Water-based paint line: yes, Inlet conveyor: yes, wast cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by rollers: yes, by scraper: yes, Water cleaning: yes, Circulating-air drier mm length in mm: ca.12000, machine ready for demonstration: yes, FREE TEXT: inkl 2 Lampen UV 120 Watt Trockner/12 Kremlin Pumpen /Pistolenwaschgerät und walzmaschine Sorbini Smartcoater, Year :2006

Hersteller : Costa, Type: Optima 2000 CNC, Year: 1993, Control: CNI, Positioning of CNC axis: yes, Double edge bander: yes, Hand-over: yes, Longitudinal edge banding: yes, Sanding machine: no, Tool exchange places: yes, Working width min-max mm: 320-4000, Arbeitshöhe min-max mm: 30-100, Saw Units: 1, Double edge bander - milling units/side total: 1, Spindle length of double edge bander mm: 620, Double edge bander with stoppers: yes, Longitudinal milling units total: 5, Längsprofiler Fräsaggregate linke Seite: 2, Längsprofiler Fräsaggregate rechte Seite: 2, Längsprofiler Fräsaggregate linke Seite: 2, Longitudinal milling units horizontally: 1, Spindle length - longitudinal milling mm: 320, Spindle diameter - longitudinal milling mm: 50, Feeding speed min-max m/min: 2,5-23, Vorschub stufenlos: yes, inkl Werkzeuge, Year :1993

HELLER H 2000 CNC horizontal machining center was built in 2022 by Heller Maschinenfabrik GmbH. The machine represents the fourth generation of the H series, specially designed for use in demanding production conditions. It is distinguished by its extensive equipment and the use of a number of state-of-the-art technical solutions that ensure reliable operation throughout its service life. The HELLER H 2000 is used for precise, 4-axis machining of workpieces with a maximum weight of 800 kg. The design of the machine provides the foundation for high productivity and machining accuracy. All structural components made of cast iron have been carefully topology optimised to ensure the highest stability and excellent force damping. Kinematics in all 4 axes, in turn, allows precise positioning of the tool in relation to the workpiece. Movement in the X-axis is carried out by a column, which s ...

Residual bread chopper Bio 2 for all light/dark leftover breads etc. "the organic universal shredder" Robust technology Connection 400V, 16A-CEE plug Used machine

Key data: 300 mm

2 Qty.1 Second-hand roll grinding machine GRINDER241001-2 Mfc.: Zocca Italy, Type: RCL 2000/6, min. roll dia.: 100 mm, max. roll dia.: 300 mm, table length: 2,000 mm, weight: 10 Tonnes

Size: A3 Equipments: Maximum mechanical speed: 35 cycles/min. Dimensions: 700 x 260 x 30 mm Power specifications: Frequenz: 50 Hz Spannung: 230 V Stromstaerke: 2,5 A

Three similar but not identical CNC sliding headstock automatic lathes Tornos including LNS bar loaders are available. 1) Lathe, axes: 9, spindles: 2, max. bar diameter: 10mm (one only 7mm), speed: 16000rpm, stroke: 66mm, machine dimensions X/Y/Z: approx. 1700mm/1050mm/2000mm, weight: approx. 1500kg, control: Fanuc. 2) Bar loader, bar diameter range: 1mm-12mm, loading capacity: 7mm/10mm: 36/24. Documentation available. An on-site inspection is possible. Individual sale of one lathe with associated bar loader possible by agreement.

Leftover bread chopper Hommel Rotormat 2000 Super "the universal shredder" Stainless steel version Powerful Connection 400V, 16A-CEE plug Dimensions: 690 x 650 x 1550mm, WxDxH Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: another sieve Delivery service Maintenance contract

Stroke machine Rego SM 2000 Stirring machine with automatic timer 1 whisk, 1 whisk 1 32 litre stainless steel kettle Connection 400V, 16A-CEE plug Used machine overhauled with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience!

Key data: 2000 kN, 55 mm

Clamping force: 200t Year of Make: 2002 Injection Unit .../675 Screw diameter 55 mm Spec. Spray pressure 2080 bar Injection volume 427 cc Clamping unit 2000/... Clamping force 200 t Size of the clamping plates 950 x 950 mm Lights spar spacing 570 x 570 mm Tool installation height 300 mm Opening way 650 mm Max. panel spacing 950 mm Year of construction 2002 Control type Selogica

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Platform: 7000/2000/H910 mm -Load capacity: 21 t -Tires: Vorwerk 645/300-410 solid rubber -Drawbar length: 1900 mm -Transport dimensions: 7000/2000/H910 mm -Weight: 2630 kg

Edge banding machine Type: Top 2000 Manufacturer: Hebrock Year: 2007 Machine in good condition, fully functional, under power Find more here - / Contact us at -

UVP HL-2000 Hybridization Incubator Temperature range: From ambient temperature +10°C to 99.9°C Hybridization furnace Model: HL-2000 HybriLinker 2 independent devices in 1 Membrane fixation by 254nm UV irradiation and hybridization Stainless steel interior Door with glass window protecting from ß emissions For long tubes. 300mm max The rotating wheel can hold up to twenty 35 x 150 mm bottles and ten 35 x 300 mm bottles at a time Membrane drawer with UV-resistant viewing window In excellent condition Tested at 37°C

LEICA DM 2000 Microscope (DM2000) - 3 Objectives Model: DM2000 Binocular Head Adjustable eyepieces HC PLAN s 10x/22 3 objectives: Plane 10x/0.22 Infinity / - / B Plane 40x/0.65 Infinity/0.17/D 100x Plan/1.25 Infinite Oil / 0.17 12V Lamp - Max 30W Average condition Power cord

Two Geiss CNC machining centers are available. 1) Geiss FZ 2000x1000, year of manufacture: 2012, travel path X/Y/Z: 2450mm/1400mm/800mm, B-axis: 285°, C-axis: 520°, speed: 30000rpm, table dimensions X/Y: 2000mm/1000mm, machine dimensions Y/Z: 2500mm/2450mm, weight: approx. 30500kg. 2) Geiss FZ 2800x1000, year of manufacture: 2013, table dimensions X/Y: 2800mm/2000m, weight: approx. 42000kg. Documentation available. An on-site inspection is possible.

Year of manufacture: 1994 / overhauled: 2025 Circumferential diameter over bed ... 630mm Turning length ... 2000mm Circumferential diameter via support ... 340mm Main engine power ... 7.5kW L x W x H ... 4000 x 1400 x 1520mm Machine weight ... 2960kg The machine is in very good condition - after the general overhaul. More info on request. It is possible to visit our warehouse in Brno.

Key data: 1 mm, 40 mm

Hebrock Euro 2000 edge banding machine – ready for immediate use Our affordable alternative. For sale is a robust and proven Hebrock Euro 2000 edge banding machine from 1993. The machine has been overhauled and is ready for immediate use. Some components have already been repaired: • Several hoses renewed • Replaced several cylinders Despite its age, the machine delivers a clean and reliable work result – typical of Hebrock's solid construction. Technical data: • Voltage: 400V 50 Hz • Connected load: 11.5 kW • Pneumatic roller capping up to max. 3 mm edge thickness • HF cross-cut saw up to 8mm edge thickness • HF combi milling station • Double belt feed • Foldable side outriggers Ideal for smaller workshops or ambitious hobby users who are looking for a functioning edge banding machine. Feel free to take a look at our other offers! m ...

Year of manufacture: 1979 / overhauled: 2024 Circumferential diameter over bed ... 710mm Turning length... 2000mm Max. workpiece weight ... 850kg Circumferential diameter via support ... 420mm Spindle speed ... 10-1000 rpm Main engine power ... 7.5kW Machine weight ... 3000kg L x W x H ... 4000x1440x1560mm The machine is in very good condition - after the general overhaul. More info on request. Viewing is possible at our warehouse in Brno.

Key data: 1 mm, 50 mm

Hebrock TOP 2000 edge banding machine – overhauled, serviced & ready for immediate use – others just push through – we check! For sale is a Hebrock TOP 2000, built in 2003, in well-maintained and technically revised condition. Radius / chamfer pneumatically adjustable. Heated inlet ruler. The machine has been extensively overhauled by us: • Most of the pneumatic hoses renewed • Replaced several pneumatic cylinders → Typical wear parts have already been dealt with and are unlikely to be an issue in the next few years. Safety switch also renewed. In addition, the machine comes from a company where specialist fitters were regularly on site for maintenance – recognisable by the existing maintenance stickers. → This speaks for a continuously maintained technical condition. Technical data: • Voltage: 400V 50 Hz • Power consumption: 6.9 kW • Current  ...

Key data: 1 mm, 10 mm

Hebrock EURO 2000 edge banding machine - completely overhauled, immediately ready for use - others just push through - We check! You can find a video about the machine on our website. For sale is a reliable and solid edge banding machine made in Germany. The machine has been technically revised and is ready for immediate operation – ideal for carpenters looking for a robust solution without investing in new machines. Radius and chamfer pneumatically adjustable. Machine can be tested on site. Condition / Works: • All pneumatic hoses renewed • 2 master cylinders new • Machine fully cleaned • Technically tested and ready for use Technical data: • Manufacturer: Hebrock GmbH (Made in Germany) • Type: EURO 2000 • Year of manufacture: 2001 • Voltage: 230 / 400 V • Frequency: 50 Hz • Power: 7 kW • Current consumption: 13.6 A Working Range:  ...

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 28300 € : 540.53 € : 40 to : 2000 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 2500 mm : 1200 mm : 1900 mm : 2100 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU200W006 MakeHPV TypeRV Base SO No.2002-M-1 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 75x15 mm Inletdia. 40 mm OutletDia. 30 mm Number of stages:2 Capacity2500l/h Max. temperature160°C With mechanical sealcheck Motor7,5 kw, 400V, (EX) With frequency controllercheck Rotor speed6000 rpm With vesselcheck Capacity2x 600l Vessel sizesDIa. 790x1400 mm MaterialStainless steel 1.4404 (316L) Inline high shear mixers Capacity0,6m³/h With motor1,5kW, 400V, 720rpm (EX) 2x With frequency invertercheck Information With switchgearcheck (as is) Floorspace4,0x3,0 m Total height2.5 Extra SpecificationsSkid mounted stainless steel RV base SO. with: IKA, type Dispax-reactor DR2000/5-ATEX, year 2013, motor 7,5kw, 400V, EX. Nirosta vertical ...

swing diameter: 2000 mm turning height: 1800 mm Control: Siemens Sinumerik 840 Dsl turning speeds range: 2,8-315 U/min cross rail adjustment - vertical: 1200 mm cross rail adjustment - horizontal: +/- 1150 mm : 1500 mm bit feeder section: 240 x 240 mm Minimum immersion diameter: 340 mm cutting capacity: 50 kN max. torque on the faceplate: 50000 Nm speed range step 1: 2,8 - 80 U/min speed range step 2: 12 - 315 U/min Max. clamping weight: 12000 Kg power capacity faceplate: 105 kW weight of the machine ca.: 33 t dimensions of the machine ca.: 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min, 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chi ...

turning diameter: 570 mm turning length: 2000 mm control: Heidenhain turning diameter over bed slide: 340 spindle turning speed range: 1 - 2500 U/min total power requirement: kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: m Features: 2 steady rests Manual chuck with jaws Tool holder with inserts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 00793 : prompt, Zwischenverkauf v : 700 € : 1 : 2010 mm : 680 mm : 880 mm : 150 kg With 6 drawers and 2 compartments Work surface 2000 x 670 mm Working height 840 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Happel layer palletizer is available. Products: bags/cartons/bundles/containers/drums, package rotation: 90°/180°/270°, pallet format: 800mm/1200mm, max. pallet height: 1500mm, min. product dimensions X/Y/Z: 150mm/150mm/40mm, max. layer weight: 150kg, max. palletizing capacity: approx. 2500pieces/h. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2500mm, weight: approx. 2500kg. An on-site inspection is possible.

General SKUR0231 MakeDraiswerke GmbH Mannheim (D) TypeT-2000 SM LocationBarneveld Pressure Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor24 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity2000 Ltr Trough sizesdia 1200x1950mm Inlet1090x900mm Top connectionsdia 80mm (1x) Inspection hatch550x400mm Outletdia. 300mm With jacket(150 ltr) Max. temperature165 degr. C With adjustable packing glandscheck Glands air purgedcheck Motor16 / 24 kW 380 Volt Ex MaterialStainless steel 1.4541 (321) Information No.51989 Year of construction1985 Floorspace4,4x1,6 M Total height1,5 M Weight5000 Kg Extra Specificationsincluding Bucher filter. filter housing material 1.4301 including 2 filter cartridges (20 filter bags 450x1100 mm) and transport trolley to disassemble the filter cartridges, filter housing size  ...

General SKU244U280 LocationBarneveld Main Features Motor1.5 KW Length2340 mm Inlet diameter100 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4552 Horizontal conveyor screwcheck Trough-typecheck Diameter90 mm Length2340 mm Between inlet and outlet2000 mm Shaft diameter60 mm Pitch97 mm Inletdia. 100 mm Outletdia. 125 mm Insulatedcheck Motor1,5 kW 220-240/380-415 Volt Screw speed20-100 rpm Height between in- and outlet500 mm With coverscheck Information Makeunknown: missing type plate Floorspace3,5x0,4 m Total height0,45 m Weight300 kg Extra Specificationsthis conveyor screw served as an inlet for cryogenic grinding Catalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeve ...

General SKU345S753 MakeHinke Tankbau GmbH (AT) LocationBarneveld CEcheck Pressure Working pressure3.5 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume2000 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity2000 Ltr (2940 Ltr) Vessel sizesdia.1400x1500 mm Dished bottomcheck Dished top sidecheck ManholeDN500/400 Top connectionsDN200, DN150, DN100,, DN80, DN50 OutletDN50 Half coil jacketed(66+18 Ltr) Max. temperature-25/200 °C With paddle stirrercheck dubble Motor5,5 kW 400/690 Volt (Ex) Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information No.8290 Year of construction2000 Floorspace1,9x1,9 m Total height4 m Weight1400 kg ATEX compatiblecheckCatalysts & fillersStainless Steel ReactorsSolventsDetergent & surf.Other pharmaceut ...

General SKU236W261 LocationBarneveld MakeHermann Waldner Type4750L No.2140 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity4750 Ltr( netto 2000 Ltr) Vessel sizesDia. 1800x2685 mm Conical bottomcheck Manholecheck DN600 Top connectionsDN50, DN40 OutletDN 100 With jacketcheckJacket room 1, volume 45 Ltr, jacket room 2, volume 105 Ltr. Max. temperature165°C. With anchor stirrercheck With scraper With paddle stirrercheck screw stirrer Counter rotating stirrercheck Motor4,4 kW, 380 volt / 7,5 kW, 380 volt Speed mixing shaft50 rpm and 30 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Year of construction1993 Mounted on legscheck With switchgearcheck Floorspace5,0x ...

General SKU339U843 MakeAPV LocationBarneveld CEcheck TypeAPV 2000 Pressure Working pressure2000 Bar Main Features Capacity11 Ltr./Hr. Motor3 KW Pressure2000 Bar Specified Features - Piston homogeniser MaterialCeramic, Stainless steel 1.4404 (316L), Stainless steel 1.4462 (Duplex2205) Piston homogenisercheck Capacity11 ltr/hour Twin stagecheck Number of pistons:1 Piston diameter10 mm InletDia: 20mm Outletcheck Motor220-240/380-415 volt, 3 kW Information No.5-07-754 Year of construction2005 Mounted on wheelsOn mobile desk With switchcheck Floorspace0,96x0,85 m Total height2,0 m Weight130 kg Extra SpecificationsWith Lista 3-drawers cabinet with tooling, 2x Premex indicators, 2x Multifix speed controllers The machine is equipped with 2 small reactors with a Premex stirring device. There are no nameplates on the reactors. Net volume per reactor is approximately  ...

General SKUR1097 LocationBarneveld MakeDrais Werke GmbH (D) TypeTR-2000 A No.51373 Pressure Working pressure0.5 Bar Vacuum possiblecheck Working pressure jacket5 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor20 KW Specified Features - Paddle dryer Paddle dryercheck Capacity2000 ltr Trough sizesdia 1200x1700mm Inletdia. 450mm (1x), dia. 200mm (1x) Outletdia. 200mm With jacket(128 ltr) Shaft can be heatedcheck Max. temperature160°C With adjustable packing glandscheck Motor13/20 kW 380 volt MaterialStainless steel Information Year of construction1983 Floorspace5,0x2,0 M Total height2,4 M Weight7500 Kg Extra Specificationseasy clean due to extendable agitator. Including Pergande filter housing type PHFR 4-1500 BH TR, -1/0.5 bar with jacket 5 bar Catalysts & fillersFeed additivesOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectione ...

General SKU244U279 MakeAllgaier-Werle GmbH LocationBarneveld TypeTSM 2000/2 Main Features MaterialMild steel/Stainless steel Surface2.5 m2 Sizes diameter1850 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface± 2,5 m² Number of sieve decks:2 Sieve sizesDia: 1850 mm With covercheck InletDia: 300 mm OutletDia: 190 mm Drive excentercheck Motor2,2 kW,220/380 Volt, 1410 rpm With brush cleaningcheck Tumbler screening machines MaterialMild steel, Stainless steel 1.4301 (304) Information No.2450 Year of construction1982 Floor space2,4x2,1 m Total height1,65 m Weight1000 kg Extra Specifications- No sieve deck includedTumbler screening machinesFeed additivesPaper & otherOther pharmaceuticsOrganicsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsPlastic & rubberMinerals & inorganicPlastic & polymersRubberOther chemicalStarchGeneric medic ...

General SKU040Z162 MakeBrogli AG Allschwill TypeMH-2000 No.2931 Year of construction1989 LocationBarneveld Pressure Working pressure0.5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume2000 Ltr. Motor21 KW Specified Features - Processing vessel MaterialStainless steel 1.4301 (304) Open stirring vesselVacuum processing vessel (1x) Capacity2000 Ltr Vessel sizesdia. 1530x1100mm, Vessel WITHOUT jacket Dished bottomcheck Flat top sidewith mechanic lifting (2,2 LW, 380 Volt) With covercheck Outletdia. 90mm With anchor stirrerscraper stirrer Motor8,5/12,0 KW, 380 Volt With homogeniser(± 750/1500 Rpm) Motor18,0/21,0 KW Information With switchgearcheck Floorspace3,8x2,0 M Total height2,9 M Weight7000 KG Extra Specifications- Equipped with 2 spiral stirrers (Helix) -- RECONDITIONED -- Technical specs Extra informationVessel without jacket Pro ...

General SKU247S159 MakeLipp Mischtechnik GmbH (D) LocationBarneveld CEcheck TypeIMR-E 2000 Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume2090 Ltr. Motor55 KW Specified Features - Powder turbo mixer MaterialStainless steel 1.4571 (316Ti) Powder turbo mixercheck Capacity2090 ltr. Trough sizesdia. 1100x2200mm InletDN200 Inspection hatchdoor dia. 1100mm OutletDN200 Max. temperature-40/120°C Motor55 kW400/690 Volt (Ex) Speed mixing shaft50 rpm With lump breaker(3x) Motor15 kW 400/690 Volt (Ex) (3x) Speed lumpbreaker965 rpm Information No.4920 Year of construction2011 Mounted on framecheck Floorspace2,5x4,7 M Total height2,3 M Weight7500 Kg ATEX compatiblecheck Extra Specificationsshaft seals by means of a flushed seal (Eagle Burgmann) including filter and product dosing vessel with agitator Catalysts & fil ...

General SKU268K300 MakeGlatt Inox AG Process Technology TypeIST-2000 No.100117 Year of construction2001 LocationBarneveld Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket8 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume2000 Ltr. Motor75 KW Specified Features - Paddle dryer Paddle dryercheck Capacity2000 l Trough sizesø 1350 x 1500mm InletDN300 Outlet300 x 220mm With jacketcheck 87+93+15 l Shaft can be heatedcheck Heating surface total 12 m² Max. temperature-20/160°C With mechanical sealcheck Motorhydr. unit 75,0 + 45,0 KW, 400/690 Volt (Ex) MaterialStainless steel 1.4404 (316L) Information Floorspace4,6 x 2,2 m Total height6,0 m Weight12.000 kg ATEX compatiblecheck Technical specs Extra informationincluding Brüdenfilter 3m2Catalysts & fillersFeed additivesOther pharmaceuticsCosmeticsSugarAnimal ...

General SKU014F047 MakeMixaco Maschinenbau Neuenrade TypeCM-2000 D No.22.856 Year of construction1993 LocationBarneveld Main Features MaterialStainless steel Volume1600 Ltr. Motor90 KW Specified Features - Cold mixer Cold mixerContainer mixer (1x) Capacity1600 Ltr, Useful capacity 800 Ltr Vessel sizesdia. 1500x750mm (brand new OEM vessel) With cover(jacketed) Outletdia. 300mm With motor90 KW, 380 Volt MaterialStainless steel 1.4301 (304) Information With switchgearcheck Floorspace3,2x1,8 M Total height3,0 M Weight10.000 KG Extra Specifications-- RECONDITIONED -- Technical specs Extra informationbrand new oem vessel DiscountCold mixersReconditionedMixacoDiscountPlastic machinery > Cold mixersReconditionedBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...

General SKU205P135 MakeMorton Machine, Motherwell Scotland No.22628 Year of construction1979 Mounted on framecheck Pressure Working pressure jacket1.7 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor55 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity2000 Ltr Trough sizes2950 x 950 mm InletDia.300 mm Top connections(2x)Dia.80 mm Inspection hatch600 x 460 mm en inlaat Outlet300 x 250 mm With jacketcheck With adjustable packing glandscheck Motor55 KW, 415 Volt (ex) Speed mixing shaft+/- 75 Rpm MaterialStainless steel Information LocationBarneveld Floorspace4900 x 2500 mm Total height1600 mm Weight3300kg ATEX compatiblecheck Extra Specificationsvessel provided with 4 connections for lumpbreakersCatalysts & fillersFeed additivesPowder turbo mixersOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfec ...

General SKUR0880 MakeApaco AG (CH) TypeAW300-2000/20-98 No.503531/1 Year of construction1985 LocationBarneveld Pressure Working pressure shell6 Bar Working pressure tubes3.2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface12 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4435 (316L) Heat exchangercheck Verticalcheck Heating surface12 m2 Tube capacity95 ltr. Max. temperature165 degr.C. Shell capacity110 ltr. Shell diameter323,9mm Shell length2700mm Wall thickness shell3,2mm Max. temperature100 degr.C. Shell connectionsDN200 (1x), DN80 (1x), DN50 (2x) Cover connectionsDN50 (1x) Information Floorspace0,7x0,7 M Total height2,8 M Weight350 KGCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceutics ...

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 130600 € : 2468.34 € : 200 to : 1200 mm : 740 mm : 220 mm : 24 - 140 mm : 50 1/min : 950x600 mm : 100 mm : 390 mm : 15 kW : 2350 mm : 1700 mm : 3435 mm : 14900 kg 8-fold ram guide light guard mot. ram adjustment hyd. overload safety device automatic lubrication according to CE rules user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360