We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
124,318 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
We sell here a gas stove from the manufacturer MBM, type G6A77XL in a very good used and functional condition. Gas operated, 42 kW, 6 lights, completely stainless steel, workshop tested, ready for immediate use, dimensions W/D/H 110/75/90 cm, others on request.
used
AGILENT GC 7890B. The MOF of it is around 2016.
used
Immediately available used exhaust gas compensator
used
Key data: 2700 , 11000
These engines have been maintained by the official Jenbacher distributor. Model: J620GSE01 Year: 2001 Hours: 12,000 Fuel: Natural Gas Capacity: 2.7 MW Voltage: 11,000 HZ: 50 Scope of Supply: Engine, Alternator, Base frame, Comap Control Panels, Gas line, External cooling tables Engine cell ventilation including louvres and filters 500L 3-4 Barg gas compressors Hawker Siddeley 11Kv switch board Plus all other controls and cabling. Generators are installed and heated. Engines have 5,000 starts so need a service. Dismantling is the responsibility of the buyer.
used
Key data: 140 , 400
Complete plug-and-play natural gas plant. Make and Model: MAN E2876 E312 Capacity: 140kW Year: 2016 Hours: 6954 Fuel: Nat Gas Volts: 400 V: 50Hz The plant was oversized compared to the needs of the factory in which it was located, and for this reason it was sold despite the low number of operating hours. Scope of Supply : Engine alternator control panel gas line acoustic canopy muffler air intake filter exhaust air filter and other accessories.
used
GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours
used
Key data: 2000 V, 11000
Jenbacher 616 Natural Gas Generator Set. This engine has been maintained by the official Jenbacher distributor. Model: J616GSE01 Year: 2001 Hours: 14,000 Capacity: 2 MW Fuel: Natural Gas Voltage: 11,000 HZ: 50 Scope of Supply: Engine, Alternator, Base frame, Comap Control Panel, Gas line, External cooling table Engine cell ventilation including louvres and filters 500L 3-4 Barg gas compressors Hawker Siddeley 11Kv switch board Plus all other controls and cabling. Generator is installed and heated. Engine has 5,000 starts so needs a service. Dismantling is the responsibility of the buyer .
used
AVAILABLE COMPLETE CHP JANBACHER 616 - Yeard 2010 With 2500kva transformer Exchanger - CHP - PANEL - complete .
used
Offer 23381 Specifications: - Suitable for welding steel, aluminium special metals, Cr Ni, etc. - Welding current 400 A 50% ED - 360 A 100% ED - Welding current adjustable from 3 A - 400 A - Synergic setting control FRONIUS COMFORT - FRONIUS water cooling unit - Separate wire feeder case VR 4000 - Intermediate package device – wire feeder case 10 m - 4 rollers of wire feed infinitely adjustable - MIG - MAG hose package water-cooled approx. 4 m - Ground cable -Reducer - Mobile base frame - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 630 mm - Weight approx. 200 kg
used
Key data: 140
2 x MAN E2842 Syngas Generator Sets Specially-designed complete 140kW Syngas Gensets on zero hours with containers. Make: MAN Hours: 0 Year: 2015 Capacity: 140kW Fuel: Syngas HZ: 50 V: 400 Scope of Supply: Engine, alternator, base frame, control panel, gas line, exhaust gas heat exchanger, container. Engine has been inspected and is in excellent condition. The engine has been manually turned over and turns easily. Equipment has been stored indoors . Price: Please Apply
used
Perkin Elmer HS 40, Headspace sampler for 40 vials, max. temperature + 210 Celsius, min. +35 Celsius, fits all gas chromator graphs,
used
Agilent 5975C inert MSD with GC 6890N Agilent 5975 C inert MSD, Agilent GC 6890 N Pfeiffer Turbomolecular Pump, Electronic Ionization/EI ; GC Injector Split/splitless, EPC, LAN Agilent Backing Pump, Software Agilent MSD Chemstation for Win10
used
Key data: 261 , 400
Complete 2G Agenitor 406 261kW biogas generator set. We have a frame and control system along with all the other balance of plant from 2015 with 50,000hrs and a low hour block from a cancelled project with only 9,000 hours on. Agenitor 406 Power: 261Kwh Hours: 9,000 Year: 2019 HZ: 50 Voltage: 400 Fuel: Biogas Scope of supply : Engine, Alternator, Base Frame, Gas Line, Control Panel, Circuit Breaker, Heat Island, Cooling Radiator, Silencer and Cabling. Photos 1 to 4 are of the 2019 block. Photos 5 to end are of the 2014 frame.
used
Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system -Max. Welding power: 800 A -with pulse function -4-roller drive -Water cooled -Incl. Ground cable -with: removable wire feeder -Gas fitting -Hose package 4 m -Quantity: 1x device available -Dimensions: 500/1010/H1600 mm -Weight: 162kg
used
Schräder AWT-BP Exhaust Gas Heat Exchanger Year: 2015 Schräder AWT-BP Exhaust Gas Heat Exchanger with Internal Bypass Type: AWT - BP 20-650 8 S 10 R303 R Year of construction: 2015
Key data: 1067 KW
we are looking for a Jenbacher 3 1067 kw we have a biogas plant
used
Key data: 5 KW, 5 kVA, 400 V
SenerTec (Badger) CHP HKA-G S1 Electricity and heat generators from 2007, not operational, complete (closed module) 1 available 5.5 KWel, 400 V/50 Hz Manufacturer: SenerTec / Dachs Model: HKA-G S1 Type: Gas CHP Serial Number: 2240777221 Fuel: Propane II Power [KWel]: 5.5 Voltage [V]: 400 Frequency [Hz]: 50 Power [KWth] 12,5 Power [KWges] 21,3 Year of construction: 2007
used
The heating system includes: - Boiler Buderus Logano GE515- gas boiler 350-400 KW - Gas burner Weishaupot WG40N/1-A ZM-LN, probably built in 2010. - Diaphragm pressure expansion vessel 800 liters, manufacturer Reflex. - Storage water heater 390 litres, Buderus. - Complete control
used
Key data: 1950 , 2437 , 11000
Cat 3520C Gas gensets Power 1950 Kw / 2437 kVA Frequency: 50 Hz Year: 2007 20 pcs available 55.000 Working hours average
used
1: Gas generators MWM TCG 2020 V16 Engine Make: MWM Engine type: TCG 2020 V16 Power: 1560 KW RPM: 1500 Fuel: Natural gas Hz: 50 Year of manufacture: 2005 2: Gas generators MWM TCG 2020 V16 Engine Make: MWM Engine type: TCG 2020 V16 Power: 1560 KW RPM: 1500 Fuel: Natural gas Hz: 50 Year of manufacture: 2008 - To be delivered in a TOP condition or condition! - Fully functional - Can be put into operation immediately - If you have any further questions, please feel free to contact us.
used
Complete CHP power plant, overhaul is done at 64.000 running hours. - Generator set - Soundproof housing - Heat recovery - Exhaust system - Exhaust cleaning (COditheen) - Silincer - Oil tanks - Control system (Diane xt) - Pumps and pipes In perfect running condition. GAS POWER HOLLAND infogaspowerholland
used
Gasket kit, Seal Kit CAT PUMPS 31039 for models 3520, 3521, 3527 34-piece New ! Dimensions (packaging): 270 x 130 x 45 mm
used
Key data: 9700 , 11000
Wartsila 20V34SG complete Gas Power plant 9.7 MW 50 Hz 11K Volts Year of make 2011 45.000 Working Hours Maintanence done regularly by wartsila 20V34SG engine with all auxilaries: ABB AMG 1120LT08 Alternator, compressors, Lt Ht water tanks, LV MV HV step up Transformers, control panels, Unic control system, radiators, maintanence tanks, 2 x Napier 357 turbochargers, safety spares, Caterpillar emergency generator,Natural Gas Regulator Unit, engine tools, instruction manual and more... Please contact for more info and complete scope / offer
used
Complete Genset, 0 hours after M6 maintenace, damaged crancksahft. (new bearings, liners, renewed turbochargers, renewed cylinder head, new main, pilot gas valves. Lot of spare parts available.
used
Cutting size 6mt x 2mt Hiperterm HD 30/70 generator Thickness from 1mm to 15mm stainless steel up to 12mm New control updated in 2020 with € 15,000 of expenditure
used
Plasma cutting table Brand: SAF / Airliquide / Oerlikon Model: Plasmatome 20 Useful cutting capacity: 2000x6mm It has rails to expand the cutting length from 6000mm to 8000mm AZURMATIC Aspiration Table of 2000x6000mm (2 modules of 2000x3000mm) CNC: BURNY 3.5 DIGISAF Complete CNC manual available. Includes computer with the Lantek CadCam and the license backpack. Plasma generator: - Brand: Nertajet - Model: HP120 - Torch: OCP 150 - Cutting capacity: Carbon Steel: 15mm Stainless Steel: 15mm Aluminum: 20mm Equipment description: - It has height control - Double motorization in the portico - Movement speed: 10m / min
used
Cutting table / Plasma cutting gantry Brand: SATO Model: SATRONIK HD 8000 Year 2002 Number of heads: 2 - 1 Kjellberg FineFocus 800 cutting head - 1 Kjellberg FineMaker marking head with PB-M25 W torch Maximum wide cutting capacity: 6,000mm Maximum length wide cut: 24,000mm Controller: SATOCNC 3000 Cutting equipment information: Brand: Kjellberg Model: FineFocus 800 Maximum cutting capacity: 80mm Cutting quality up to: 60mm Maximum drilling capacity: 40mm Maximum current at 100%: 300A Automatic gas console
used
Wartsila 34 SG V18 charge air cooler, intercooler, combustion air cooler. Overhauled cleaned, pressurtested for sale. Excellent condition.
used
MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition . Price: Please Apply
used
Gas Flare Brand: C-Deg Model: LTC 1,7 VE Year: 2020 Fuel: Biogas Additional info: DN 80 normal volume: 300m2/h max combustion power: 1,7MW Gas composition: CH4 : 55 Vol.-% (min 40 to max 60), CO2: 45 Vol.-% (min 55 to max 40), H2S max 1000pm .
used
CVP A200 bulk gas flush machine Power: 3 Phase
used
Suprarex 3500 (width 3500mm) with plasma M3 of the second generation (G2) and with WIC (water clearance for the possibility of cutting under water). The machine was bought mainly for cutting stainless steel. Of course, it can also cut carbon steel or aluminum (it can only be cut separately). Basic consumable parts for the burner are also included. The machine was practically never used and cut for a total of 1 hour (started up and tested).
used
Year of Manufacture: 2015 Location: Czech Republic Description: Machine in good technical condition, possibility of testing after agreement. Technical parameters: cutting range - steel 12mm, Al 6mm gas - O2, N2, air laser power - 2kW max. sheet size - 1500 x 3000mm ejection of material and blanks - manually, 1 table online monitoring of cutting Wrykrys software for creating firing plans . Accessories: compressor and filter. unit.
used
The machine is in good technical condition, it is possible to test it by agreement. Type P 2000 adapted to a removable grate and waste tub. The original machine had an inadequate water bath. The removal of flue gas is therefore via additional extraction. A simple and functional machine for locksmiths. The machine including the Alfa In Pegas 101 CNC aggregate, the control PC (where there is a sheetcam program for creating tool paths), a set of consumables for the machine torch. The PC has a monitor, keyboard and mouse. Tables for burning different material thicknesses have been tested on the PC. It is possible to burn steel, aluminum and stainless steel from a thickness of 0.5-20 mm. Working area: 1000x2000mm Active wasps Z Control software: Mach3 X/Y/Z guide: HIWIN HGR20 Drive: Nema23 stepper motors - 2.8Nm Maximum speed: 12000mm/min Construction: Solid welded Dimensions: 1600x2400x1000m ...
used
The machine is in good technical condition, after agreement the possibility of testing. ALFATEC CNC compact plasma 2m x 1 m, PEGAS 100 PLASMA CNC, Torch S 125 10m PEGAS 100 Plasma machine, WRYKRYS - technological program. Dimensions: length 270 cm, width 200 cm, table height 80 cm, height including control panel 170 cm, weight 940 kg.
used
Machine Type: Electrode Inverter Welding Rectifier Brand: Merkle Type LiteARC 160 Connection voltage 1 x 230 Volt Serial No. 127.931 Adjustment range 15 – 160 amps Duty cycle 25% ED at 150 amps 60% ED at 90 amps 100% ED at 80 amps Infinitely variable current adjustment max. weldable material thickness 4 mm Cooling inverter by built-in fan Design of portable assembly system Fuse protection 16 amps Dimensions L x W x H 360 x 150 x 240 mm Weight 6 kg Age 3 years Optional Accessories Carrying Strap Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece of ground cable 1 piece of electrode cable 1 piece of slag hammer, heavy-duty version 1 piece steel wire brush, 2 rows 1 piece mains plug 230 V, solid rubber 20 rod electrodes in 2.0 x 250 mm ...
used
BIO GAS GENERATOR BRAND : GE JENBACHER MODEL : 620 YEAR : 2009 CONDITION: IN EXCELLENT CONDITION ONLY 500 HOURS OF OPERATION 1500 KW
used
gasket kit damper / KPL XOMOX CRANE 080/16 ISO - 81 for high-performance butterfly valve 800ISO Nominal diameter: DN 80 pressure rating: PN 16 seat material: Firesafe Shaft seal: graphite New ! Dimensions (packaging): 120 x 120 x 20 mm
used
gasket kit damper / KPL XOMOX CRANE 080/16 ISO - 00 for high-performance butterfly valve 800ISO Nominal diameter: DN 80 pressure rating: PN 16 seat material: PTFE shaft seal: PTFE New ! Dimensions (packaging): 120 x 120 x 20 mm
used
gasket kit damper / KPL XOMOX CRANE 100/16 ISO - 81 for high-performance butterfly valve 800ISO Nominal diameter: DN 100 pressure rating: PN 16 seat material: Firesafe shaft seal: graphite New ! Dimensions (packaging): 160 x 145 x 20 mm
used
gasket kit damper / KPL XOMOX CRANE 150/16 ISO - 00 for high-performance butterfly valve 800ISO Nominal diameter: DN 150 pressure rating: PN 16 seat material: PTFE shaft seal: PTFE New ! dimensions (packaging): 200 x 200 x 20 mm
used
Complete MAN E3262 LE202 Natural Gas container set. Make and Model: MAN E3262 LE202 Fuel: Natural Gas/Biogas Year: 2020 Man Block / 2016 Container and ancillaries Hours: 0 Capacity kW: 530 HZ: 50 Voltage:400 Scope of supply: Complete container generating set including - Engine, Alternator, Control panel (ComAp), Container, Exhaust gas heat exchanger, Gas Blower, Radiator and Gas line.
used
serial number: 0493373 ampere: 420 A water cooling unit: kW total power requirement: kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
For sale is a Stamford PE 734 F2 generator with serial number A07E797662. This generator was coupled to a Jenbacher 612 engine with the design number D851. The generator delivers an output of 2080 kVA at a frequency of 50 Hz and a voltage of 400/231 V. It was manufactured in 2007 and has since clocked up 30,000 hours of operation. Please note that the 30,000-hour service has not yet been performed. Please do not hesitate to contact us for more information or to arrange a viewing.
used
We are pleased to offer for sale a Stamford HVSI 804 S2 generator bearing serial number 0855537/01. This model was originally paired with a Jenbacher 616 engine with the design number G311. The generator is characterized by its high power of 2515 kVA, which is generated at an output voltage of 11,000 V. This model has already completed 64,000 hours of operation. An important aspect to keep in mind is that the bearings of this generator have been changed every 20,000 hours of operation. The price of this generator is 12,000 euros. For more information or to arrange a viewing, please do not hesitate to contact us.
used
For sale is a Stamford LVSI 804 W2 generator, which bears the serial number 0854702/01. This model was originally paired with a Jenbacher 616 engine with the design number B503. The generator has a power of 3555 kVA, which is generated at an output voltage of 690 V. The price of this generator is 15,000 euros. For more information or to arrange a viewing, please do not hesitate to contact us.
used
For sale is a Stamford LVSI 804 S2 generator with serial number 0853928/01. This model was originally paired with a Jenbacher 616 engine with the design number B783. The generator delivers an output of 2790 kVA at an output voltage of 400 V. It has already completed 40,000 operating hours. We would also have the associated engine in stock. The price of this generator is 16,500 euros. For more information or to arrange a viewing, please do not hesitate to contact us.
used
For sale is a Stamford LVSI 804 W2 generator, with the serial number 0854818/01. This model was originally paired with a Jenbacher 616 engine with the design number E844. The generator delivers an impressive output of 3555 kVA at an output voltage of 690 V. This model, which was manufactured in 2008, has only completed 15,000 operating hours. The price of this generator is 30,000 euros. For more information or to arrange a viewing, please do not hesitate to contact us.
used
For sale is a Stamford LVSI 804 W2 generator with the serial number 0854896/01. This generator was coupled to a Jenbacher 616 engine with the design number E844. The generator delivers an output of 3555 kVA at an output voltage of 690 V. It was manufactured in 2008 and has since clocked up 15,000 hours of operation. Please note that this generator has been overhauled and has no operating hours since the overhaul. The price of this powerful generator is 30,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.
used
For sale is a LEROY-SOMER LSA L95/4P generator with the serial number 607788/1. This generator was coupled with a Jenbacher 620 engine with the design number U320. The generator delivers an output of 2530 kVA at an output voltage of 400 V. It was manufactured in 2016 and has only 500 hours of operation since then. The price of this powerful and hardly used generator is 30,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.