2000 kw gas used for sale

Dear Ladies and Gentlemen, We have the following Oil Transformers in stock Description: Type : Oil Transformer Finish : Hermetic Make :P AUWELS Year of construction : 2001 Condition : Used Inspected Rated power : 2000 KVA Medium voltage : 20 KV + 4 x 2.5 % Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Dimension Length 205 cm Width 114 cm Height 205 cm Weight 5290 KG Other powers and voltages also available from 100 KVA to 5000 kva. All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery . Available for further questions Mon to Sat 8 a.m. to 10 p.m.

: 8000 kg length: 7000 mm width: 2000 mm loading area height: 700 mm Heavy-Duty Trailers - Industrial Trailers - Available immediately from stock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24194 Specifications: - Max. working width 2040 mm - Max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop - Upper beam is operated with side hand crank - Max. stroke upper beam 85 mm - Max. adjustment bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm - Weight approx. 1620 kg

Type of mixer Height 1700 mm Width 1300 mm Length 3500 mm Capacity 2000 l Power supply: 400V 50Hz 3N Total power 18 kW Main Material Stainless steel, acid-resistant Agitator Type Vane Agitators Product ejection Pneumatic bottom flaps, product ejection from below Loading No loading, it is possible to buy a pillar loading for the machine Mixer Type Open Mixer Number of rollers Twin shaft

MINOX E-Tumbler Screening Machine --> New Machine from Customer Order for Illustration: -2-decker, screening in 3 fractions -2x ball knock cleaning -Lifting device -Safety clamping screws -Sieves of your choice; Fabric : areas in contact with the product in stainless steel 1.4301 (Aisi 304) 2-deck machine : 2.6m² / deck Drive : 4 KW

Hydraulic shearing machine manufactured in 2002. This HERA TS 2000x6 features a maximum sheet thickness of 6 mm and a cutting length of 2080 mm. It operates with a stroke rate of 18 strokes per minute and is powered by an 11 kW motor. If you are looking to get high-quality shearing capabilities, consider the HERA TS 2000x6 machine we have for sale. Contact us for further details.

table length: 4000 mm table width: 2000 mm : 28 mm table height: 815 mm : kg weight of the machine ca.: 1,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Folding machine good condition, ready for immediate use. For details, please refer to the nameplate

Horizontal turning machine manufactured in 1997. This BOEHRINGER DUC 560/2000 features a maximum turning diameter of 570 mm and a turning length of 2000 mm. It includes an 8-position disc turret and a three-jaw chuck with a diameter of 200 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER DUC 560/2000 machine we have for sale. Contact us for further details.

Used fully automatic labeling machine made by KHS Innoket model SE 2000. New 2007. Wet and hot glue labeling capability. Automatic film roll change at each RF station; automatic paper label magazines. Machine speed for RF (hot glue) - max 45,000 butts/hour. Machine speed for paper labels - max 45,000 butts/hr. Machine equipped with 2 stations for paper labels, 2 stations for film labels; 40 plates.

PKC/ 2000 Steam peeler for vegetables with steam buffer used, sold as it is, where it is, price ex location

Height 2200 mm Width 1400 mm Length 2800 mm Weight approx. 1300 kg Capacity 2000 l Power supply: 400V 50Hz 3N Total power 5.1 kW Main Material Stainless steel, acid-resistant Order processing time available in stock Barrel Aeration Valve Yes, Manual Valve Driver type Mikster MCM 023 Variable speed control of the tumbler Smooth adjustment of the barrel speed Tumbler with cooling jacket No Load approx. 1400 kg

STORK LASER SCREEN ENGRAVING EQUIPMENT ( ROTARY TEXTILE PRINTING ) LASER ENGRAVER MAKE : STORK TYPE : STK-2000 YOC : 1988, RENEWED / MAJOR OVERHAUL 2012 LENGTH : 310 CM WITH END RING GLUING UNIT TYPE : STORK SCR-85 LACQUER COATER : TYPE : STORK RSE 3100, Q4B1/2000 YOC : 2000 2 DRYING UNITS SCREEN INSPECTION & WASHING EQUIPMENT COOLING SYSTEM SOFTWARE & HARDWARE FOR ENGRAVER PIPING, DUCTING, CABLING ETC ONE LOT OF SMALL EQUIPMENT USEFUL FOR SCREEN PRODUCTION

This 3-axis CHARMILLES Roboform 2000 was manufactured in 1995. It features a maximum workpiece dimension of 880 × 550 × 225 mm and operates with a maximum machining current of 64 A. With only 1,497 operating hours, this machine has been used primarily for training purposes. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 2000 CNC Die-Sinking EDM machine we have for sale. Contact us for further details.

Manufacturer: KraussMaffei Technologies GmbH Model: 1000-2000-1400 MX W Year of Manufacture: 2018 Type of Machine: Injection moulding machine Capacity: 1000T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 4, Width 10, Height 3.5 (cm or m) - Weight 40000 kg - Voltage 480 Volts - Current 500 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) - Cooling or heating water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 400 l/min, 5

Coolant tank 20 m3 consisting of 2 tanks that are joined together. From container 1 there is an overflow into container 2. Installation area approx. 2500 x 4000 mm for both containers. Was used as a container for pure oil for the grinding process, so there was no rust at all. Condition very good!

Manufacturer: KraussMaffei Technologies GmbH Model: 2000-8100 Year of Manufacture: 2021 Capacity: 2000T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 5, Width 15, Height 4 (cm or m) - Weight 102000 kg - Voltage 480 Volts - Current 400 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) - Cooling or heating water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Water treatment plant Manufacturer: BWT Type Osmotron 2000-PH-S System was overhauled in 2020, new control cabinet from 2021 Year of construction 2000 BWT Osmotron water treatment plant of BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production 1 piece of water treatment plant BWT Osmotron Plant of the company BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production, incl. • 90μm pre-filter with automatic backwash • Softening system in series operation (without hardening slip) and for 600 litre salt-plastic tank for regeneration • Heyl Testomat 2000 • 2 chlorine cells to reduce germs in the softeners • Reverse osmosis modules for 2000l/h • 4x SM20 EDI modules (electro-deionization modules) • Conductivity meter for permeate (after reverse osmosis module) Mettler Toledo • Conductivity meter for diluate (according to EDI modules) THORNTON 200 ...

Tetra Pak Hoyer Model : FF 2000 Used for : Ice cream Fruit Feeder Y.o.m : 2003 Condition : Very Good

Manufacturer: ETSCHEID Content: 2000 l Equipped with agitator With integrated cleaning unit (CIP) Including cooling unit very good condition, fully functional

This 5-axis DOOSAN PUMA 2000SY was manufactured in 2006. It features a sub-spindle and a Y-axis for enhanced machining capabilities. The machine includes a bar feeder and 10 motorized driven tool holders, providing versatility for various applications. With a total operating time of 8836 hours, this horizontal turning machine represents a valuable opportunity for high-quality turning capabilities. Reach out for further details regarding this machine.

The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band Width:20mm

All stainless steel Hopper capacity: 2000 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 18 KW Installation dimensions of machines in cm: Width: 193 Length: 227 Height: 215

The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

The US-2000 AB with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

The Colchester Combi 2000 has been overhauled and is in very good condition. Spindle motor power: 7,500 W Year of Make: 1998

CATEGORY - 5-Axis BRAND - DMG MORI MODEL - NT 5400/1800 SZ DCG WAREHOUSE NO - ONY100000580 YEAR OF MANUFACTURE - 2007 CONTROL UNIT - MSX-701 III AXIS TRAVELS - X1 1,040 MM / X2 267 MM / H ± 255 MM / Z1 1,940 MM / Z2 1,830 MM ROTARY AXIS MOVEMENTS - B ±120° / C 360° MAX. TURNING DIAMETER - 920 MM MAX TURNING DIAMETER - 470 MM MAX TURNING LENGTH - 1.921 MM SPINDLE - 1 SPINDLE SPEED - 2,400 MIN/-1 MIRROR SIZE - 450 MM ROD DIAMETER - 107 MM MAIN SPINDLE SPEED (S1) - 8,000 MIN/-1 HOLDER TYPE - CAPTO C8 SPINDLE - 2 COUNTER MIRROR REVOLUTION - 2,400 MIN/-1 MIRROR SIZE - 450 MM TURRET-2 NUMBER OF HOLDERS - 10 MACHINE WEIGHT - 36.000 KG MACHINE EXTERNAL DIMENSIONS - 4.50 X 6.61 X 3.46 M

Inv. Num. : 7935 Type: Trumatic 2000 R Producer: Trumpf Created: 2003 Parameters: Compressive force: 18 t Maximum length of sheet metal plate: 2070 mm Maximum blade width: 1270 mm Maximum sheet metal plate weight: 75 kg Max. sheet thickness: 6.4 mm Maximum punching speed: 900 1/min Machine height: 2070 mm Machine length: 6000 mm Machine width: 5600 mm Machine weight: 8000 kg

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2000 liters Machine dimensions in cm: Length: 270 Width: 154 Height: 222 Electric power: 6.5 kW

OKS Stationary Air Pressure Vessel Galvanized 1 piece 2000 liters 1 piece 1000 liters Test pressure 16 bar, operating pressure max. 11 bar at call Tel. 01715213204

turning diameter: 570 mm turning length: 2000 mm control: Sinumerik 805 Siemens swing diameter over face slide: 365 mm main spindle speeds:: 3-2.500 U/min drive of main spindle: 15/19 kW spindle bore: 62 mm spindle head: DIN 55027 No.8 tailstock taper MT: 5 quill stroke: 190 mm pinole diameter: 80 mm feed range - long. and cross: 0,01-50 mm/u total power requirement: 50 KVA weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete with intelligent random in feed system. As new condition

A Baumunk contour wire saw in need of repair is offered. Drive power: 5.5kW, control: Bosch OSA. The machine has been idle for about one year. Contour sawing was still working well when last used. The mounting for the grinding rollers is defective. Inspection by appointment possible.

This 3-axis Goodway GLS-2000LYS was manufactured in 2022. It features a spindle speed of 4,500 rpm and a robust 12-station driven turret. The machine includes an 8 hydraulic chuck with a bar capacity of 65 mm and a 5 sub-spindle. If you are looking to get high-quality turning capabilities, consider the Goodway GLS-2000LYS horizontal turning machine we have for sale. Contact us for further details.

Key data: 80 t, 2000 mm

Inv. Num. : 7022 Type: PPEB-EQ 80/2000 Producer: LVD Created: 2008 Parameters: Control system: CADMAN CNC Compressive force: 80 t Maximum bending length: 2000 mm Stroke: 200 mm Distance between the frame walls: 1500 mm Maximum lifting speed: 130 mm/s Maximum bending speed: 11 mm/s Maximum retraction speed: 115 mm/s Total power requirement: 12.5 kW Main motor power: 7.5 kW

- Ultra-Sonic banding machine - Standard with the existing accessories

The deep hole drilling machine is in very good condition! Deep hole drilling machine type TBM 120-2000 BTA drilling system Drilling range full drilling 30-130 mm Max. boring 200 mm B8Uwbfcphz Max. drilling depth 2000 mm Drilling spindle box with two-stage gearbox electr. Switchable. Optionally rotating / standing tool Main spindle box ( tailstock ) with two-stage gearbox electr. switchable Tailstock with counter-rotation Optionally with or without counter-rotation Hydr. Cheek chuck We will be happy to send you more pictures on request. We also see ourselves as a competent partner in the field of deep hole drilling in contract work. We would be happy to make you an offer!

The US-2000 LB with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

This 5-axis CHIRON Mill 2000 was manufactured in 2010. It features a Siemens 840D NC control and a robust main spindle motor by Siemens. The machine has a total of 3,129,425 tool changes, showcasing its efficiency in production. If you are looking to get high-quality machining capabilities, consider the CHIRON Mill 2000 vertical machining centre we have for sale. Contact us for further details.

Used vacuum tumbler by Nowicki model MA-5-2000 PS. The device will be perfect for meat processing plant for massifying and tenderising meat. Model: MA - 5- 2000 PS Power: 4,1 KW Weight: 1190 kg Capacity: 2000 litres Intake: 1200 kg Bowl speed: 0 - 9 / minute Length: 2860 cm Width: 1335 cm Height: 1670 cm

Hydraulic injection moulding machine manufactured in 2002. This Arburg Allrounder 570 C 2000-675 features a clamping force of 2,000 kN and a maximum mold height of 950 mm. It includes a screw diameter of 50 mm and a maximum injection volume of 353 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 570 C 2000-675 machine we have for sale. Contact us for further details.

ATS 2000US, Arch size 50x26cm, band width: 30 mm, welding by ultrasoon / high frequency, for jumbo rolls, in perfect working order