2000 kva used for sale

• Bottle formats: Diameter approx. 20\endash 40 mm, height approx. 45\endash 70 mm, other sizes possible depending on format set • Output approx. 6000 bottles/h • with format for round bottles Ø 24 mm x length 52 mm • Feed hopper with lifting device, • aligner for correct positioning of the bottle on the conveyor belt (e.g., filling machine) • 240V/50 Hz

Parallel Lathe CAZENEUVE HB 575 Between points: 2000 mm Maxi Ø on bench: 575 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Spindle speed: from 20 to 1600 RPM Multifix Turret 3-jaws chuck Ø 250 mm Spindle motor: 8,8 kW Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Lubricant pump 3 points fixed steady - Max Ø 160 mm Voltage: 380 V Dimensions (L x W x H): 3500 x 1500 x 1800 mm Weight: approx 3 T

Weinig Powermat 2000 planing line with in and outfeed system, Manufacture Year 2012, - 10 spindles: B-T-R-L-R-L-T-B-T-B, - feed speed max. 40 m/min, - with Powerlock and Powercom, Consisting of:, - Cross chain transport for wood packages, - CSP automatic infeed, - Weinig moulder Powermat 2000, - Outfeed belt, - 2 pc. Fromm automatic strapping machine

Weinig Powermat 2000 planing line with in and outfeed system, Manufacture year 2007, - 9 spindles: B-R-L-R-L-T-B-T-B, - feed speed max. 40 m/min, - with Powerlock and Powercom, Consisting of:, - Cross chain transport for wood packages, - Weinig automatic infeed system, - Weinig moulder Powermat 2000, - Outfeed belt

CONTROLS   electronic controls SIEMENS S7 300 PRESS DESIGN   drive system: eccentric / crank   openings in uprights: yes   number of suspensions: 2   table cushion: no   quick die change system: yes PRESS FORCES   total force (nominal): 250 to PRESS TABLE   table surface (left-right): 2000 mm   table surface (front-back): 1100 mm   height above floor level: 1105 mm   opening in bed (left-right): 1700 mm   opening in bed (front-back): 305 mm SLIDE   table surface (left-right): 2080 mm   table surface (front-back): 1000 mm   stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS)   slide adjustment: 120 mm   stroke adjustment: yes   stroke min.: 20 mm   stroke max.: 180 mm TOOL ASSEMBLY DIMENSIONS  & ...

Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fit ...

Dimensions (L/W/H): 2200x1800x1200 mm Weight: 650 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 17 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2985x2160x2000 mm Weight: 2000 kg Total power requirement: 30 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2000x3010x1250 mm Weight: 400 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1800x1200 mm Weight: 650 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2000x2800x1100 mm Weight: 310 kg Total power requirement: 3,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25515 Specifications: - Max. working length 2050 mm - Column passage 1750 mm - Max. pressing force 850 kN - Distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 365 mm - Lifting speeds - Rapid traverse downward speed 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx. W 2700 x H 2900 x D 2100 mm - Weight approx. 9100 kg - with: - with CNC control DELEM , DA - Two-hand control panel with foot switch - Controlled crowning device - Back gauge with height adjustment 5 - 860 mm - hydr. Tool clamping - Die table displacement pneumatically supported - Sharpening tool + V-die

Key data: 2000 kN

Clamping unit very well preserved, see pictures, also fits 570A as a spare part

Year of construction 2012 Siemens Control 840D Remote diagnostics and teleservice On-screen maintenance instructions 5-axis milling package Rigid table with integrated rotary table Kessler DTE 520 max. speed 1000 rpm Travel X/Y/Z 2000/685/630 mm NC swivel head with headstock NC swivel axis +- 100° - direct measuring system Speed range 20,000 rpm Direct displacement measurement systems Tool changer with 92 places Rapid traverse 40 - 40 - 40 m/min Axle acceleration 0.25 g Chip conveyor (hinge belt) Coolant system HL 450 / 900 (IKZ) Chip gun Coolant recooling unit Additional tub flushing Machine preparation for air through the spindle Extraction for the working area Safety package MILL 2000 reinforced cab with safety washers Zero-point clamping system NSL tur 570-5-Z for DTE 520 Mitfahrende Chiron Lasercontrol Single F295 Tool breakage detection Probes Renishaw OMP ...

For plastic scraps, in most cases without need to reduce size The offer includes:, STORAGE HORIZONTAL BELT, to grant non-stop feeding, DIAGONAL LOADING BELT, made in sturdy carbon steel with side walls, dragging paddles, PVC carpet, AGGLOMERATOR with barrel Ø1.500 mm.,, length 4300 mm. width 2300 mm. height 5.050 mm. 560 kw , Hp 730 65% used in work Side opening panel for inspection and replacing blades Operator switchboard, Exchangeable inner steel liner for barrel Oleo-dynamic power station 0,75 kw with electro-valve opening, Hub temperature control system, Grease lubricated drive bearings, 0,4 kw ventilator for belt cooling with air conveyor, Steam sucking vent 4 kW UNLOADING HOPPER, complete with 200 mm Ø, diagonal auger for agglomerated material 1,5 kW drive., size 1.150 mm. x 2.000 mm. Lower opening for cleaning purposes Operations, upper lid, two inspection windows (one can be o ...

Stainless steel mixer with Lodige/Loedige rakes 2000 liters Type FKM 2000 D / 6Z Two side inspection doors One side port for liquid mixture injection Manual discharge hatch 6 side shredders / rotating knives Usable volume from 500 to 1500 liters, Elec:: 380V 50Hz 56A , Engine: 30kW 40CH

General SKU409X1293 LocationBarneveld CEcheck Specified Features - Miscellaneous Motor12 volt Information MakeKonica Minolta TypeSpectroradiometer CS-2000 Mach.No.D 1003173 Floor space0,88x0,63 m Total height0,90 m Weight60 kg Extra SpecificationsLuminantie range 0.003 till 500.000 cd/m2, contrastmeting 100.000:1 meter, measuring range wave length 380 till 780 nm with resolution off 0.9 nm/pixel. On aluminum frame, : without laptop MiscellaneousKonica MinoltaMiscellaneous > MiscellaneousBrand > Konica Minolta What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

length: 3000 mm width: 2000 mm height: 250 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3 2 0,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2000 mm width: 2000 mm height: 350 mm total power requirement: - kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: 220,9 m Sonderpreis EXW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extraction and filtration of aerosols Manufacturer: United Air Specialists Type: Mena 2000 Com. 13051 P: 1.5 kW Vmax: nom. 1700m³/h pg: 1500 Pa U: 400 V F: 50 Hz I: 3.3 A tmax: 65 C More items - new and used - can be found in our shop! International shipping costs on request!

Sewing machine Stacker Delivery (Meccanotecnica Plus (1995))

Norfoil 2000 reel to reel hot stamping press Web width 160 mm Unwind Web guide Cutting Lamination Hot foil Rewind Waste rewind Razor blade slitter

Manufacturer: ASYS Model: INSIGNUM 2000D Scan Year of Manufacture: 2018 TECHNICAL SPECIFICATIONS Nominal Voltage: 230 / 115 VAC Working Voltage: 24 V DC Frequency: 50 / 60 Hz Full Load Current: 1.5 / 3.0 A Number of Phases: 1 Power: 0.32 kW (320 W) Circuit Breakers: 10 A Pressure: Not applicable Flow: Not applicable DIMENSIONS Length: 1.2 m Width: 0.6 m Height: 1.8 m WEIGHT 200 kg NETWORK CAPABILITY Yes CERTIFICATION CE Marked APPLICATION Industrial automation / scanning system Find more here - / Contact us at -

Banding machine, ATS US 2000 AB, machine no. A65054, in good condition, immediately available

Driven roller conveyor L 2000 mm, usable width 500 mm Motor drive Unit price 350 € 25 pieces in stock

Ball transfer table 2000-1007-1000 RA2407 Technical data: Year of manufacture: unknown Condition: good (used) dimensions: 2000x1000 distance balls: 55 mm row, with 75 mm pitch Height: 800 mm - 900 mm Scope of delivery: including feeds Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Key data: 3000 kN

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM300-1900CX Year of Make: 2011 Clamping force: 300 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Maximum displacement: 769 cm³ Moulded part weight: 692 g/hp Control: MC6 Equipment: 3 pcs. core train Interface Robot 45-fold hot zone channel control Interface temperature control unit Approx. 51,000 operating hours

Perfect binder FKS KB-2000; Serial No. 00977708041843, Hot Melt, 1 Clamp, Material Detection Sensors Automatic envelope detection, automatic envelope clamp, spine milling, undercarriage, in good condition, available now Technical data: Maximum format: 320 x 310 mm Back thickness: 60 mm Output: approx. 320 books/hour Weight: 186 kg 230V power supply

Brand: Videojet Type: Inkt Jet Marking Machine Model: Excel 2000

Vöest, E50/2000, Lining, Multifix, 15KW, Mas. No. 07351501

General SKU368U993 Makehaagen & Rinau LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume2614 Ltr. Motor55 KW Specified Features - Processing vessel MaterialStainless steel 1.4571 (316Ti) Closed stirring vesselcheck Capacitynetto 2000Ltr (bruto 2614Ltr.) Vessel sizesø 1380 mm x 1500 mm Conical bottomcheck Dished top sidecheck With covercheck Manholeø 450 mm Top connectionsDN100, DN25, DN11 OutletDN50 With jacketcheck Max. temperature151°C With paddle stirrercheck agitator with mating blades and with scrapers Counter rotating stirrercheck Motor15kW, 380Volt. Speed mixing shaft6,3-38 rpm With homogenisercheck 500-2540 rpm Motor55kW, 380Volt Information No.851 4331 Year of construction1993 Mounted on legscheck Floorspace1,7 x 1,7 m Total height4,5 m Weight± 8 ...

Control Siemens SINUMERIK 828D Rotary diameter. [mm] 288 Turning length [mm] 243 Workspace max. turning diameter 288mm max. machining length 243mm X-axis 175mm Z-axis 350mm Main spindle Chuck diameter 210mm max. rod diameter 67mm Spindle bore diameter 76mm Drive power 10.5/20 kW Max. torque 213.7 Nm max. speed 4,500 rpm Tailstock Quill diameter 65mm Quill stroke 80mm Axial force 4,312 N Center Punch Holder MT4 Tool turret Number of tool stations 12 Tool holder BMT45 Powered Tools Yes max. speed 5,000 rpm

We offer this used Sinico SIN-O-MATIC TOP 2000 saw and end processing machine, built in 2011. Model: SIN-O-MATIC TOP 2000 Type: TR110/2-350-CL-S CNC Serial Number: 1459 Year of manufacture: 10/2011 Weight: 7200 kg (plus magazine) Workpiece diameter: 110 mm Maximum workpiece length: 350 mm Installed power: 65 Max kW CNC control from NUM Automatic machine for cutting to length and machining the ends. Transfer machine with horizontal axis table for cutting and end processing of tubes and bars. Flexible and highly adaptable CNC machine. It guarantees high productivity, up to 2500 parts/hour, and is designed for the machining of small to large workpieces: bar diameters up to 110 mm, finished part lengths up to 350 mm. Maximum versatility in the processing of tubes and rods It is able to carry out the following machining operations Chamfering – Face Milling – Threading ...

General SKU212X067 MakeMinox TypeMTS 2000/2 LocationBarneveld CEcheck Main Features MaterialStainless steel Surface2.5 m2 Sizes diameter1800 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,5m² Number of sieve decks:2 (1,5mm-1,2mm) Sieve sizesDia. 1800 mm With covercheck InletDia. 300 mm OutletDia. 200 mm Drive excentercheck Motor2,2 kW, 220-240/380-420 volt, 1425 rpm With extra sieve deckscheck 3x ( 0,2mm-0,8mm-1,25mm) Tumbler screening machines MaterialStainless steel 1.4301 (304) Information No.9518 Year of construction1997 Mounted on mild steel framecheck Floor space2,40x2,40 m Total height1,90 m Weight1200kgTumbler screening machinesMinoxSieves > Tumbler screening machinesBrand > Minox What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...

Height 2700 mm Width 2400 mm Length 3200 mm Capacity 2000 l Electrical Supply: 400V 50Hz 3N Total power 75 kW Main Material Stainless Steel, Acid Resistant No loading, possibility to buy additional pole loading for the machine Throat diameter 250 mm Wolf type Straight wolf Auger Stuffing Feeding System Hopper Throat Workmanship Stainless Steel Material of the feeding screw Stainless steel, acid-resistant Description The wolf-mixer has an infrared MultiTrack analyzer. It analyzes the fat, protein and water content of meat. Approximate accuracy: approx. 2%.

Holzprofi Maker PS315F-2000 sliding table saw with smooth sliding carriage and large outrigger table, pivoting circular saw blade, and finely adjustable crosscut stop. Space-saving thanks to the easily removable outrigger table. Scoring tool, miter stop, and eccentric clamp included as standard. New: Preparation for grooving cutter. Technical data: Main engine power S1 3,8 kW Voltage 400 V Saw blade tilting 45° Sliding table 2000 x 267mm Cutting length 2300 mm Saw blade size 315 mm Bo. 30 mm Scoring blade 100 mm Bo. 20 mm Cutting depth 90°/45° 100 mm / 80 mm Speed saw blade 4500 RPM Speed scoring saw blade 8500 RPM Extraction connection 100 mm Groove cutter thickness (optional) 6-22.5 mm Groove cutter bore (optional) 30 mm Weight 284 kg Optional equipment: with 2600mm format table, Driving device FE-MW-1

Hardened precision steel bar guided sliding aluminium table. Parallel fence with micrometric fine adjustment. Sawblade tiltable up to 45° with hand wheel. eccentric clamp, stable outrigger table for working heavy plates with degree raster Mitre fence 1400 mm with 2 end stops, integral fence 500 mm Circular saw: max sawblade diameter 315 mm spindle diameter 30 mm max. cutting width at parallelfence 850 mm max. cutting height, 90°/45° 103 mm/72 mm engine power 3,8 kW S6 (3 Kw S1) dust collector inlet 120 mm length of sliding table 2000 mm Spindle moulder: spindle diameter 30 mm spindle travel 160 mm spindle speeds 8000/6000/3500/1500 engine power 3,8 kW S6 (3 Kw S1) weight 520 kg

WORKING RANGE TURNING   swing diameter (max): 2000 mm   worpiece length max.: 10000 mm   workpiece weight max.: 60000 kg The machine was completely overhauled in 2004.Accessories: various bezels, as shown in the pictures.

Key data: 600 mm, 2000 mm

CNC Lathe Manufacturer: Gildemeister Type CTX 500 Year of manufacture 1999 little used max turning length 2000mm Driven tools every 2nd turret station 315mm three-jaw chuck Schunk Bezel SMW Machine is in TOP condition Geometrically it is also still very good, deviation at 2000mm 0.02mm. Machine is available from week 18. For further information, I am available to you at any time at 01778957069.We also have Whatsapp.

General SKU326X672 MakeMinox TypeMTS-2000/3 No.9975 Year of construction2007 overhauled 2017 LocationBarneveld Main Features MaterialStainless steel Surface11.34 m2 Sizes diameter1900 mm Specified Features - Tumbler screener MaterialStainless steel 1.4301 (304) Tumbler screening machines Vibro sievecheck Sieve surface11,34 m2 Number of sieve decks:3 Sieve sizesDia. 1900 mm With covercheck InletDia. 300 mm OutletDia. 200 mm Drive vibro motorcheck Motor0,4 kW, 400/690 volt, 1450 rpm Sieve perforation0,315 mm With ball cleaningcheck With extra sieve decks12x: 2x ball decks, 1x 0,12/1x0,16/2x 0,2/ 2x 0,3/0,315/0,5/0,56/1,0 mm, Information Mounted on mild steel framecheck Floor space2,2x2,2 m Total height1,70 m CEcheckTumbler screening machinesMinoxSieves > Tumbler screening machinesBrand > Minox What you can expect from Foeth: -- Machine is in working condition ...

2 Kuka for floor mounting, payload 150kg, weight approx. 1280kg 1x Type KR150 L110-2 2000 1x Type KR150 L130-2 2000

General SKU295P584 MakeGerald Kainz Verfahrenstechnik GmbH (DE) TypeGTS-2000 No.18/027 Year of construction2018 LocationBarneveld Main Features MaterialMild steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener MaterialMild steel Tumbler screening machines Vibro sieveTumbler screening machine Sieve surface2.6 m2 Number of sieve decks:1 Sieve sizesdia.1880mm With covercheck Inletdia.300mm Outletdia.200mm Drive excentercheck Motor4,0 KW, 400/690 Volt Sieve perforation(no sieve) Information Mounted on mild steel framecheck Floor space2,0x2,0 M Total height1,8 M Weight1150 KG Extra SpecificationsThis sieve is unusedTumbler screening machinesKainzSieves > Tumbler screening machinesBrand > Kainz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...

Whirlpool Vessel, fitted with stainless steel hinged lid. Approx. 2000Litres Tangential inlet with 1.5" RJT male inlet point. Three separate take off points with 1.5" RJT male butterfly valves. Insulated and clad in fully stainless steel. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

SUNNEN ML2000, Honing Diameter Range:, - Manual Stroking: 1.5 mm to 165 mm, - Power Stroking: 1.5 mm to 102 mm, Spindle Speed:, - Infinitely variable from 200 to 3,000 RPM, Stroke Rate:, - 60 to 350 strokes per minute, Automatic Sizing Range:, - 3 mm to 51 mm, Oil Tank Capacity:, - 106 liters, Pneumatic Requirements:, - 5.5 bar, Machine Dimensions:, - Length: 1,600 mm, - Width: 1,220 mm, - Height: 1,900 mm, Weight:, - Approximately 725 kg

Subj.: Offer about second-hand cut-to-length line Dear Mr Rajput, We have pleasure to provide you with an offer about second-hand cut-to-length line that is immediately for sale. Qty. 1 Second-hand cut-to-length line Mfc.: SACMA, UWM Built: 1994 Material: Stainless steel Strip Width: max. 2000 mm Thickness: 3.0 – 8.0 mm De-coiler Coil weight: 25,000 kg max. Leveller: 13 rolls, dia.: 130 mm Guillotine: start / stop type, manufactured by SACMA, Paper / cellophane feeder Stacker Run-out table Dimensions: 34 x 8 m Speed: 30 m/min

Stainless Steel Vertical Cylindrical Tank 2000L. Single skin with side entry manway and top inspection port. Lifting eyes Sight level gauge. Sample Tap Racking point with valve. Bottom outlet with DIN40 butterfly valve. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm.

This TORNOS DECO 2000/13 was manufactured in 1999. It features a bar passage of 16 mm and supports up to 20 fixed and 16 rotating tools. Equipped with an IEMCA loader, CONVEYORS IND. ASS. conveyor, and additional oil filter tank, this machine ensures efficient operation. Consider the opportunity to buy this TORNOS DECO 2000/13 swiss type turning machine. Contact us for more information about this machine.