200 kva used for sale

Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, th ...

Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Machine type: Dumper (site dumper) Manufacturer: Thwaites Model: MACH 130 Year/Manufacturer: n/a, Thwaites Ltd (UK) Serial number: 493238 Operating hours: n/a Engine power: 30.0 kW Weights: - Unladen weight: 4,450 kg - Payload: 7,500 kg Equipment: - Front tipping skip - Articulated chassis - 4-wheel drive - Off-road tires - ROPS frame Condition: - Used condition - Visible wear and dents on skip edges Remarks: - Robust mid-size dumper suitable for construction and earthmoving - Good payload-to-weight ratio Own mass: approx. 4,450 kg Auction-ID: A7-45990-59

Category: Road Sweeper Truck Brand / Model: MAN TGM 18.240 Type: Street sweeper (vacuum system) Configuration: 4x2 rigid truck Engine: Diesel engine Power: approx. 240 HP Year: 2007 First Registration: 01/03/2008 VIN: WMAN08ZZ78Y199859 Mileage: 263,198 km (visible) Gross Weight: 15,000 kg Design Gross Weight: 18,000 kg Train Weight: 18,500 kg Design Train Weight: 21,500 kg Axle Load 1: 5,600 kg (design 7,100 kg) Axle Load 2: 10,600 kg (design 11,500 kg) Tyres: 10R22.5 (144/142) Dimensions: Length: 7,300 mm Width: 2,240 mm Equipment: Vacuum sweeping system Equipment: Side brushes Equipment: Suction hose Equipment: Water tank system Condition: Used Remarks: Municipal sweeper, suitable for road maintenance Own mass: approx. 9,000 kg Auction-ID: A7-45990-28

Machine type: Wheel loader Manufacturer: Ahlmann Baumaschinen GmbH Model: AS85 / AS90 Year/Manufacturer: 2007, Ahlmann Serial number (FIN): W09S090551BA08720 Engine power: 51.5 kW Perm. total weight: 7,300 kg Axle load front: 4,500 kg Axle load rear: 4,500 kg Operating hours: approx. 4,094 h (visible) Equipment: - Front bucket - Articulated steering - Enclosed cabin - Hydraulic quick coupler - Work lights Condition: - Used condition - Signs of wear and usage Remarks: - Compact wheel loader suitable for construction and agricultural use - Good maneuverability due to articulated chassis design Own mass: approx. 6,500 – 7,000 kg Auction-ID: A7-45990-56

Machine type: LPG Forklift Manufacturer / Brand: Nissan Motor Co., Ltd. Model / Type: L01A15W Year of manufacture: 2000 Serial number: L01-005293 Country of manufacture: Japan Engine type: Nissan LPG engine Fuel type: Gas (LPG) - Tnak Not-included Drive type: Rear-wheel drive Rated capacity: 1,500 kg Lifting height: 3,000 mm Load center distance: 500 mm Mast type: Duplex standard mast Truck weight: 2,690 kg Fork length: approx. 1,200 mm Tire type: Solid rubber tires Dimensions: Length 2,200 mm × Width 1,050 mm × Height 2,100 mm (approx.) Controls: Manual levers with steering wheel control Seat: Adjustable suspension seat with seat belt Lighting: Front and rear work lights, beacon light Condition / Remarks: Nissan L01A15W LPG forklift in operational condition. Equipped with a reliable Nissan LPG engine, duplex mast, and solid tires. Compa ...

Machine type: Tandem roller Manufacturer: Hamm (Wirtgen Group) Model: HD 8 VV Year/Manufacturer: 2006 Serial number: H11700279 (partially readable) Operating hours: n/a Technical data: Engine power: approx. 16 kW Operating weight: approx. 1,750 kg Engine: Hatz diesel engine Equipment: - Twin drum (tandem) vibration roller - Articulated steering - ROPS frame - Operator seat Condition: - Not-working Remarks: - Compact roller suitable for small compaction works - Ideal for pavements, trenches and landscaping Own mass: approx. 1,750 kg Dimensions (LxWxH): approx. 2,200 x 1,000 x 2,300 mm Auction-ID: A7-45990-49

Consisting of 4x stainless steel brew kettle total capacity 4400 L; usable capacity 3000 L; size of brewing tank approx. Ø 1900x3500 mm; of which 2x tank with agitator; Stainless steel platform (2000 mm high) with stairs; 2x stainless steel pump units; 1x Seepex funnel pump; Siemens Simatec control console with touchscreen; heat exchanger (2018); stainless steel sink and cabinet included, Year of installation 2023 Auction-ID: A1-45771-1

Product Identification Number (PIN): KMTPC129T76K00534 Engine Model: Yanmar 3TNV82A Engine Power: 16 kW (≈21.5 hp) Operating Weight (Approx): 2,630 kg Dimensions (L×W×H Approx): ~4.0 m × 1.5 m × 2.4 m The machine works but has problems with the controls; all controls are very slow Auction-ID: A7-45990-15

On offer is a used, high-quality and robustly built Lambert market/sales trailer with folding/foldable body. The trailer is suitable for mobile sales, weekly markets, events or comparable purposes. Construction and operation: The trailer has a crankable lifting roof, all-round crankable supports and smooth-running gas-pressure folding elements. According to the seller, the folding elements open very easily and hold well. The sales area is completely covered. Equipment: fold-out sales tables Sturdy real glass display case Side panels and large back panel as rain protection Simple electrical system with battery Shore power connection and light Sink older cash register/scale with cash drawer Weights and other small parts Condition: The trailer is in a used condition appropriate to its age. There are signs of wear and tear due to age and use, soiling on tarpaulins and visible cor ...

Machine type: Crawler excavator Manufacturer: Caterpillar (CAT) Model: 318C L Year of manufacture: 2006 Serial number: CAT0318CADAH00959 Technical data: Engine power: 94 kW Operating weight: 22,400 kg Equipment: - Standard digging bucket - Mono boom - Steel tracks - Enclosed operator cabin - Hydraulic quick coupler (visible) - Auxiliary hydraulic lines on boom Condition: - Used condition - Undercarriage in used condition - Identification plate damaged but readable Remarks: - Proven CAT 318 series machine - Suitable for general excavation and earthmoving works Own mass: approx. 22,400 kg Auction-ID: A7-45990-42

Machine type: Wheel loader Manufacturer: Volvo Construction Equipment Model: L30B-Z Year/Manufacturer: 2000, Volvo CE – Germany Serial number: L30BD1802286 Engine power: 43 kW Operating weight: 6,650 kg Equipment: - Front bucket - Articulated steering - Enclosed cabin - Hydraulic quick coupler - Work lights Condition: - Used condition - Repainted (non-original paint) - Visible signs of wear and usage Remarks: - Compact wheel loader suitable for construction and yard work - Good maneuverability due to articulated chassis Own mass: approx. 6,650 kg Auction-ID: A7-45990-55

The trailer needs some love. Electricity to be checked, both lighting and cabling for the tipper. Some damage here and there. Auction-ID: A3-44485-34024

CNC lathe GILDEMEISTER NEF 400 Year of Make: 2005 Control: Siemens 840 D Technical data Turning length: 650 mm Circumferential diameter over bed: 400 mm Circulation diameter over face slide: 270 mm Spindle bore: 65 mm Flat travel (X): 220 mm Longitudinal travel (Z): 700 mm Max. main spindle speed: 4,000 rpm Tool turret: 8-speed Machine weight: approx. 3,175 kg Auction-ID: A1-46872-25

Model: Caterpillar D6K Type: Tracked dozer Operating weight: 12,611 kg Engine: CAT C6.6 ACERT, 6-cyl turbo diesel Engine power: 93.2 kW Hours: 7,862 h Year: 2008 Blade type: PAT (Power Angle Tilt) Blade capacity: approx. 3.0 m³ Blade width: approx. 3.25 m Transmission: hydrostatic, variable speed Undercarriage: standard track, 560 mm shoes Cabin: ROPS/FOPS, air-conditioned, ergonomic controls Included equipment: PAT blade, lighting kit, heating, drawbar Compliance: CE Power supply: Diesel Manufacturer: Caterpillar Inc., Peoria, Illinois, USA (France plant) Approx. own mass: 12.6 t Durable mid-size dozer ideal for grading, backfilling and general earthmoving applications. Auction-ID: A7-45990-7

Machine type: Crawler excavator Manufacturer: Liebherr Model: R924B HDSL Litronic Year/Manufacturer: 2007, Liebherr France S.A.S. Serial number: WLHZ0761EZC020270 Operating hours: approx. 13,325 h Technical data: Engine power: 127 kW Max. travel speed: 5.2 km/h Engine: Liebherr diesel engine Equipment: - Mono boom - Standard dipper arm - Digging bucket - Steel tracks - Enclosed operator cabin Condition: - Used condition - Visible signs of wear, scratches and paint damage Remarks: - Solid 24-ton class excavator - Suitable for earthmoving and general construction works Own mass: approx. 24,000 kg Auction-ID: A7-45990-45

5-axis CNC machining center MIKRON XSM 600 U Year of Make: 2009 Control: Heidenhain iTNC 530 Technical data X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm B-axis: +30° / -110° C-axis: n x 360° Working spindle: 100 - 36,000 min-1 Tool holder: HSK E 50 Auction-ID: A1-46872-58

Heller MCH 250 4 axes Year of Make: 2006 Control: Siemens 840 D Technical data Spindle speed: 12,500 rpm Travels X: 800 mm Y: 800 mm Z: 800 mm Pallet size: 630 x 630 mm Max. tool length: 600 mm Auction-ID: A1-46872-55

Machine type: Tandem vibratory roller Manufacturer: HAMM (Wirtgen Group) Model: HD 10C VV Year/Manufacturer: 2006, HAMM AG – Germany Serial number: H1700209 (visible) Operating hours: n/a Engine: HATZ diesel engine Engine type: 1D / 1-cylinder diesel (visible plate) Power: 16 kW Weights: Operating weight: 1,575 kg Empty weight: 1,450 kg Max weight: 1,650 kg Axle load: Front: 800 kg Rear: 900 kg Equipment: - Double drum (tandem) vibration - Open operator station (ROPS frame) - Mechanical drive Condition: - Used condition - Visible wear, scratches and corrosion Remarks: - Compact roller for asphalt and soil compaction - Suitable for small construction sites and finishing works Own mass: approx. 1,575 kg Auction-ID: A7-45990-53

Machine type: Tandem roller Manufacturer: JCB Vibromax Model: VMT 390 Year of manufacture: 2008 Serial number: JCB 1701312 Technical data: Operating weight: 3,900 kg Engine power: 34.3 kW Engine: Kubota diesel engine (label visible) Equipment: - Twin smooth drums (front & rear) - Open operator station with ROPS frame - Hydrostatic drive Condition: - Used condition - Visible wear and surface rust on drums - Scratches and paint damage on body Remarks: - Compact tandem roller suitable for asphalt and soil compaction - Reliable Kubota engine Own mass: approx. 3,900 kg Auction-ID: A7-45990-43

OKUMA EURO CENTER V 50 Year of Make: 2002 Technical details Control: OSP-U100L Travel X: 1,020 mm Travel Y: 510 mm Travel Z: 525 mm Table Load: 680 kg Clamping area: 1,200 x 510 mm Tool Changer Magazine slots: 20 Facilities Chip conveyor Auction-ID: A1-46872-50

Mounted on the first floor at approximately 4 meters high (see last photo) Auction-ID: A1-45771-24

Complete exterior insulation kit for approximately 120 sqm, available for liquidation sale. This package includes EPS polystyrene boards (200 mm thickness), providing ultra-high thermal insulation performance, along with a full adhesive system, reinforcement layer, fiberglass mesh, facade dowels, PVC profiles, primer and white mineral decorative plaster for final facade finishing. This is an ultra premium insulation system, ideal for maximum energy efficiency and low heat loss buildings. Quantities are approximate and calculated for a standard facade surface. Ideal for: Passive houses Energy-efficient constructions New builds with high insulation standards Export & resale All materials are palletized and ready for transport. MATERIAL LIST EPS Polystyrene Boards EPS100 – 200 mm thickness – 120 sqm EPS Adhesive / Polystyrene Fix Grey 25 kg – 30 bags Reinforcement Adhesive / ...

Technical data Approximate dimensions at location (L×W×H): 8,300 × 2,500 × 2,330 mm Weight (approx.): 33,000 kg Serial Number: 161394 Product Description Clamping unit Clamping force: 6,500 kN Distance between columns: 1,025 × 930 mm Min./Max. tool height: 450 / 950 mm Maximum opening width: 1,800 mm Injection unit Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g Electric-hydraulic equipment Nominal power of the pump motor: 55 kW Heating capacity: 62 kW Auction-ID: A1-46872-53

Milling machine Kondia B640 Year of Make: 2004 Control: Heidenhain iTNC 530 Tool Measurement System: Tool Eye Tool Changer Magazine slots: 22 Travels X-axis: 600 mm Y-axis: 400 mm Z-axis: 510 mm Main spindle Speed: max. 12,000 rpm New main spindle: renewed in 2020 Tool holder: BT 40 Table Clamping area: 800 x 400 mm Refrigerant IKZ 20 bar External coolant supply Spindle cooling Accessories Chip conveyor Various tool holders Various clamping pins Machine documentation Auction-ID: A1-46872-39

Vehicle type: Passenger car Manufacturer: Land Rover Model: Freelander Year/Manufacturer: 2002, Land Rover VIN: SALLNAE8A2A053532 Engine: Diesel engine Engine power: 82 kW Engine capacity: 1951 cm³ Transmission: Manual gearbox Drive: All-wheel drive (4x4) Mileage: 266,448 km (according to odometer) Color: Blue Number of seats: 5 Equipment: - Manual transmission - Air conditioning - Power steering - Trailer coupling possible (see registration) Tires: 205/80 R16 Condition: - Used condition - Interior shows wear consistent with age - Exterior with scratches and signs of use Remarks: - EU registration documents available (Romania) - Vehicle suitable for off-road and utility use Own mass: approx. 1,693 kg Auction-ID: A7-45990-63

Machine type: Wheel loader Manufacturer: Komatsu Model: WA380-6 Serial number: H60372 Product identification number (PIN): KMTWA095E79H60372 Year of manufacture: 2007 Operating hours: 15,441.4 h Operating mass: 19,450 kg Engine power: 140 kW Cab: Enclosed operator cab (ROPS) ROPS: Yes Bucket: Front loading bucket Tyres: Pneumatic tyres, heavy-duty profile Color: Yellow Remarks: - Machine identification plate available and readable - ROPS plate present - Signs of wea - Bucket shows operational wear - Hour meter readable Own weight: approx. 19,500 kg Auction-ID: A7-45990-5

CNC lathe Angelini Oscar Year of Make: 2003 Control: GE Fanuc Series 21i-T Technical data Permissible diameter on the slide: 320 mm Recommended turning diameter: 220 mm Maximum turning diameter: 320 mm Turning length with chuck: 600 mm X-axis travel: 270 mm Travel Z-axis: 720 mm C-axis: available Tool turret: 12-speed VD30 Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 32 m/min Spindle nose: ASA 5\" Spindle bore: 61 mm Bar Passage: 52 mm Power spindle motor: 15 kW Maximum spindle speed: 4,500 rpm Diameter hydraulic chuck: 210 mm Tailstock quill diameter: 70 mm Tailstock quill stroke: 190 mm Collet chuck: available Dimensions (L x W x H): 402 x 130 x 199 cm Weight: 4,500 kg Auction-ID: A1-46872-34

This inverter model has the latest functions and features to successfully complete welding work. The inverter is user-friendly and efficient and thus a valuable addition to the workshop of the professional welder or solder. The high-frequency ignition on this inverter makes it possible to use the device without having to stroke the electrode during stick welding. The robust handle also gives you more grip during heavy work. In addition, this makes it a lot easier to take the tool with you for working on location. The inverter housing is also extremely strong, so vibrations and even unexpected contact with other devices or components do not have a negative impact on operation or durability. Auction-ID: A1-40256-138

Height 810 mm, mounted on steel beams, travel 4070 mm, incl. REXROTH MS2N07-C1BRN-CMSH1-NNNNE-NN 3-phase motor Auction-ID: A7-46821-28

Description Machine type: Trailer-mounted concrete pump Manufacturer / Brand: CIFA Model / Type: v Year of manufacture: 2003 Country of manufacture: Italy Serial number: 00278 Performance Max. theoretical output: 30 m³/h Max. oil pressure: 220 bar Max. CLS pressure: 70 bar Engine Engine manufacturer: Deutz Engine model: F4L 1011 F Engine power: 38 kW (50.9 HP) Engine speed: 2400 rpm Displacement: 2.732 l Engine serial number: 00798493 Weights Max. weight: 2,470 kg Configuration & Features - Trailer-mounted concrete pump - Integrated hopper with safety grid - Control panel with pressure gauges and switches - Stabilizing support legs - Towable chassis with road wheels Condition / Remarks Used concrete pump in working condition. Normal wear consistent with age and use. Auction-ID: A7-45990-24

Machining Center - Universal Lid Maho DMU 60 T Year of Make: 2002 Number of axes: 5 (3+2) Technical data Travels X-axis: 630 mm Y-axis: 560 mm Z-axis: 560 mm Magazine slots: 24 Tool holder: SK 40 NC rotary table NC rotary table built into the rigid table. Clamping area: 600 x 1000 mm Diameter: 600 mm Table weight: 800 kg Number of T-slots: 8 / 1 T-slots width: 14 H12 / 14 H7 T-slot spacing: 63 mm Max. load of the table: 350 kg Rotatable C-axis: 360° 5-axle equipment Controlled NC swivel milling head (B-axis) Rotary table integrated in rigid table (C-axis) Auction-ID: A1-46872-48

Machine type: Wheel loader Manufacturer: DAEWOO Model: MG400-III Year of manufacture: 2000 Serial number: 1238 Power: 101 kW Operating weight: 21,900 kg Equipment: - Front bucket - Enclosed operator cabin - Articulated steering - Large off-road tires Condition: - Used condition - Visible wear and corrosion on bucket and body - Tires used but serviceable - NOT functional Remarks: - Robust machine suitable for earthmoving and loading operations - Inspection recommended prior to use Own mass: approx. 21,900 kg Auction-ID: A7-45990-30

Machine type: Crawler excavator Manufacturer: Volvo Construction Equipment Model: EC210CL Year of manufacture: 2007 Serial number: VCEE210CJ00110668 Operating hours: approx. 8,967 h Technical data: Operating weight: approx. 22,960 kg Engine power: 110 kW Engine: Volvo diesel engine Equipment: - Mono boom - Standard dipper arm - Digging bucket - Steel tracks - Enclosed operator cabin Condition: - Used condition - Signs of wear and scratches - Engine visually complete Remarks: - Popular 20-ton class excavator - Suitable for general construction and earthmoving Own mass: approx. 22,960 kg Auction-ID: A7-45990-44

Machine type: Telescopic handler Manufacturer: CLAAS (by Caterpillar) Model: TARGO K50 / CAT 512 Year of manufacture: 2002 Serial number: 51200549 Technical data: Engine power: 91 kW Unladen weight: 7,360 kg Rated capacity: 4,000 kg Permissible total weight: 8,500 kg Axle load front: 4,000 kg Axle load rear: 4,700 kg Equipment: - Telescopic boom - Fork carriage with pallet forks - Enclosed operator cab - All-terrain tires - Hydraulic quick coupler - Lighting system Condition: - Used condition - Visible corrosion and paint wear on boom and chassis - Fork attachment with rust - Cabin in used but complete condition - Hour meter reading: approx. 5,712 h - Important: Reverse drive not-working Remarks: - Robust agricultural/industrial telehandler - Suitable for loading and material handling - Manufactured for CLAAS by Caterpillar (UK)  ...

Mounted on the first floor at approximately 4 meters high (see last photo) Auction-ID: A1-45771-23

Complete exterior insulation kit for approximately 140 sqm, available for liquidation sale. This package includes EPS polystyrene boards (200 mm thickness), offering maximum thermal insulation performance, together with a full adhesive system, reinforcement layer, fiberglass mesh, facade dowels, PVC profiles, primer and white mineral decorative plaster for final facade finishing. This is an ultra premium insulation system, designed for top-tier energy efficiency and minimal heat loss. Quantities are approximate and calculated for a standard facade surface. Ideal for: Passive houses High-efficiency buildings Premium residential projects Export & resale All materials are palletized and ready for transport. MATERIAL LIST EPS Polystyrene Boards EPS100 – 200 mm thickness – 140 sqm EPS Adhesive / Polystyrene Fix Grey 25 kg – 35 bags Reinforcement Adhesive / Base Coat Grey 25 kg  ...

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools Auction-ID: A1-40256-129

Equipped with conveyor belt 1000x400 mm with Foenix FX label / marking machine, discharge roller conveyor 400 mm wide, approximately 11 meters long Auction-ID: A1-45771-15

Complete exterior insulation kit for approximately 160 sqm, available for liquidation sale. This package includes EPS polystyrene boards (200 mm thickness), delivering maximum thermal insulation performance, together with a full adhesive system, reinforcement layer, fiberglass mesh, facade dowels, PVC profiles, primer and white mineral decorative plaster for final facade finishing. This is an ultra premium insulation system, designed for top-level energy efficiency, minimal heat loss and long-term performance. Quantities are approximate and calculated for a standard facade surface. Ideal for: Passive houses High-efficiency residential buildings Premium construction projects Export & resale All materials are palletized and ready for transport. MATERIAL LIST EPS Polystyrene Boards EPS100 – 200 mm thickness – 160 sqm EPS Adhesive / Polystyrene Fix Grey 25 kg – 40 bags Reinforc ...

Planetary mixer/meat grinder including wire whisk, flat mixer and other accessories. Viewing by appointment. Auction-ID: A1-40256-54

Tractor Case Type: Magnum MX180 9762 hours Starts and runs well. Sometimes it doesn't run. Year of construction: 2001 Serial Number: X1804C4JJA0103153 Auction-ID: A3-43534-11003

CNC Machining Center DECKEL MAHO DMC 64 V Year of Make: 2004 Control: Heidenhain iTNC 530 Technical data X-axis: 640 mm Y-axis: 600 mm Z-axis: 500 mm Table size: 800 x 600 mm Workpiece weight: max. 600 kg Spindle: SK 40 Speed: 12,000 rpm Auction-ID: A1-46872-24

Vehicle type: Flatbed truck Manufacturer: MAN Model: 8.163 L 2000 Year/Manufacturer: 1998, MAN VIN: WMAT20V469G131468 Engine: Diesel engine Engine power: 114 kW @ 2400 rpm Engine capacity: 4580 cm³ Transmission: Manual gearbox Drive: Rear-wheel drive Mileage: approx. 450,017 km (according to odometer) Configuration: - Flatbed / dropside body - Cabin for 2 persons Weights: - Own mass: 4,480 kg - Max. authorized mass: 7,490 kg - Payload: approx. 3,010 kg - Max. axle load front: 3,200 kg - Max. axle load rear: 5,200 kg Towing capacity: - Braked: 3,500 kg - Unbraked: 750 kg Tires: 215/75 R17.5 Condition: - Used condition - Exterior with scratches and corrosion Remarks: - Romanian registration documents available Own mass: approx. 4,480 kg Dimensions (LxWxH): approx. 7,390 x 2,550 x 2,805 mm Auction-ID: A7-45990-64

CNC machining center WAGNER WMC 800 R Year of Make: 2008 Control: Siemens 810 D Technical data X-travel: 800 mm Y-travel: 500 mm Z-travel: 510 mm Table height: 830 mm Max. tool length: 250 mm Tool diameter: 80 mm Clamping area: 800 x 450 mm Number of tool positions in the magazine: 20 Speed range: 8,000 rpm Auction-ID: A1-46872-33

Time standstill operation is not known, viewing by appointment only! Auction-ID: A1-40256-96

Technical data Table size (2): 825 x 625 mm Number of pallets: 2 X-axis movement: 1,600 mm Y-axis movement: 600 mm Z-axis movement: 500 mm 4th axis (rotary table): NC Maximum table load: 1,200 kg Maximum spindle speed: 12,000 rpm Auction-ID: A1-46872-54

Machine type: Telescopic handler Manufacturer: Manitou Model: MLT 627 T Monolift Serial number: 251706 Chassis number: 1251706 Technical data: - Rated power: 74.5 kW - Unladen weight: approx. 5,935 kg - Maximum tractive effort: approx. 5790 daN - Maximum train weight: approx. 24915 daN - Vertical max. effort (trailer hook): approx. 1500 daN - Tyre pressure: Front 2.75 bar / Rear 2.75 bar - Fork attachment included Year of manufacture: 2008 Condition: - Used condition - Visible wear and scratches on body and boom - Fork carriage shows typical usage wear Remarks: - CE marked - Cabin machine - Suitable for agricultural and construction handling tasks Own mass: approx. 5,935 kg Auction-ID: A7-45990-21

LID MAHO DMU 125 T hi-dyn 3-axis CNC universal machining center Control: Heidenhain MillPlus Year of Make: 2002 Powerful and robust 3-axis machining center from DECKEL MAHO. Ideal for complex milling operations in tool, mould and machine construction. Travels • X-travel: 1,250 mm • Y-travel: 880 mm • Z-travel: 800 mm Main spindle • Speed range up to 18,000 rpm⁻¹ • Drive power: 15 / 10 kW • Max. torque: 500 Nm • Tool holder: SK 40 Work table • Table clamping surface: 1,500 × 1,050 mm • Max. table load: 2,500 kg • Number of T-slots: 10 • T-slot width: 18 H7 mm • T-slot spacing: 100 mm Tool Changer • 30 tool positions • Max. tool diameter: 80 mm • 160 mm with free adjacent position • Max. tool length: 315 mm • Max. tool weight: 8 kg • Max. total weight in the magazine: 100 kg Feeds • Rapid traverse  ...

Technical details X-travel: 1,100 mm Y-travel: 510 mm Z-travel: 510 mm Rapid traverse: 18 / 18 / 15 m/min Control: Siemens 840 D SL Shop Mill Table surface: 1,200 x 600 mm Workpiece weight: 1,000 kg Spindle speeds - infinitely variable: 8,000 rpm Spindle holder: ISO 40 Tool Changers: 24 Cooling by the spindle: 20 bar Machine Details Machine weight: approx. 8 t Space requirement: approx. 3,000 x 2,350 mm Connected load: 400 V, 50/60 Hz Current: 50 A Facilities Shop Mill Preparation for 4th axis Auction-ID: A1-46872-51