200 kva man used for sale

2 UNITS/SETS OF NRH0001 PACKED TOGETHER. A SINGLE NRH0001 CORRESPONDS TO: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x NRH0001 PACKED TOGETHER: 530 x 800 x h750 mm - 164 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-214

2 UNITS/SETS OF NRH0001 PACKED TOGETHER. A SINGLE NRH0001 CORRESPONDS TO: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x NRH0001 PACKED TOGETHER: 530 x 800 x h750 mm - 164 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-39

Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-60

Offer 26027 Technical data: - Max. pressing force 32 t - Max. ram stroke approx. 250 mm - Max. installation height 350 mm - Pitch per revolution of the handwheel approx. 48 mm - Stand width / passage approx. 575 mm - Table support surface with 4 diagonal T grooves 575 x 475 mm - Printing plate area 500 x 260 mm - Tool holder at the top 30 mm - Through-hole in the table 200 mm - Space requirement approx. W + D 1000 / 1500 x H 2000 / 2400 mm - Weight approx. 1000 kg

Equipped with forks equipped with Perkins diesel engine of which the turbo has recently been replaced equipped with quick change front wheel steering, crab steering, four-wheel steering 4x4 drive working work lighting extra hydraulic function for the boom extra hydraulic function at the towbar tires in good condition Auction-ID: A1-40136-31

electric windows and mirrors, mirror heating, steering wheel controls, air conditioning, lock, digital tachograph, refrigerator, sleeping cabin, double fuel tank, starter breaker Auction-ID: A1-42015-8

Sommer S42 hydraulic mandrel bending machine ; with 6 meter long mandrel and complete with tooling and accessories; suitable for bending pipes and pipes in steel, stainless steel, aluminum and copper; Voltage: 380 volts ; Power: 4.6 kW ; Steel capacity: 42.4 mm x 3.25 mm ; Minimum bending radius: 40 mm ; Maximum bending radius: 120 mm ; Bending jigs; 15mm R40, 18mm R40, 22mm R45, 28mm R55, 35mm R70 Auction-ID: A1-45170-1

Unused ; UWM 500 welding manipulator ; MIG/MAG CO2 and TIG ; capacity vertical 500 kg ; horizontal capacity 250 kg ; tiltable up to 135° ; table diameter 550 mm ; rotation speed 0–5 rpm ; 230 V ; foot control ; Machine weight approx. 220 kg Auction-ID: A1-45170-15

Length of mandrel: 4mtr ; With various sizes of molds Auction-ID: A1-45170-20

CASSETTES FOR MANIFOLDS - 10 PCS - - 80 x 120 x H150 Auction-ID: A7-46421-24

\" SASIT Manipulator M200 – Column Slewing Crane with Grab Stationary column handling manipulator with articulated arm and hydraulically / pneumatically operated gripping system. Used for handling and packaging large ball bearings in the shipping area. Version with: • Fixed column with base plate • Swivel arm • Parallelogram gripper unit • Adjustable gripping range • Control unit on the arm • Signal light • CE marking Max. load according to the inscription on the arm: 200 kg Load capacity according to the nameplate: 150 kg Year of construction: 1997 Drawing no.: 970 538 Made in Germany Condition: Machine is out of order. Disassembly and function test not carried out. Traces of use from industrial use present. Sale as shown. Manufacturer: SASIT Industrietechnik GmbH Type: Manipulator M200 Load capacity: 150 kg Max. load (arm labeling): 200 kg Year of construction: 1997 C ...

Axel cofiguration: 4x4; Mileage: 580 000 km; Auction-ID: A7-46408-20

\" Steel cabinet with contents – tool holders / grinding mandrels / collets – approx. 670 x 280 x 1020 mm Steel cabinet with extensive contents from workshop inventory. The cabinet is equipped with various grinding mandrels, mounting mandrels, clamping holders, grinding wheels, collets and other accessories. In some cases, the components are stored in polystyrene blocks and labeled (e.g. 5 / 10.0 etc.). Also available: • wooden box SWISSCO Leonberg • various grinding wheels • mounting flanges and spacer rings • collet set (in the wood holder) • further turning and sanding fixtures according to pictures Sale is complete with contents, as shown. • Type: steel cabinet, single-door • Dimensions (W x D x H): approx. 670 x 280 x 1020 mm • Colour: grey / blue • Contents: various tool holders, grinding mandrels, collets, grinding wheels • Condition: used \" Auction-ID: ...

Urban AP-B 4000 ProfilbearbeitungszentrumYear of manuf. : 2016 Control : Heidenhain TNC620 Movement X/Y/Z : 4100/420/300 mmTool holder : SK40 ____________Description:In general:Model:AP-B 4000 Automatic Profile Machining CenterMachining length:4,000 mmTravel ranges X/Y/Z:4,100 / 420 / 300 mmMachine cover:Pneumatically operated, opens upwardControls:Operator terminal can move along the machineControl:Heidenhain TNC 620 CNC controlAdditional control:Heidenhain HR130 handwheelTable specifications:Size 16 T-slots, mounted longitudinally to the X-axisWorking surface:4,200 x 420 mmSpindle:Motor power:14 kW S1 / 19 kW S6Motor cooling:Water with additiveSpeed range:100 to 14,000 rpmTorque:74 Nm S1 / 100 Nm S6Drilling capacity in St 60/aluminum:25 mm/30 mmThread size in St 60/aluminum:M20/M30Tool magazine:Tool holder:SK 40Tool clamping system:Spring-loaded clamping system with 9 kN clamping ...

2 - the black and white Auction-ID: A7-46462-51

Vehicle data Manufacturer: Manitou Type: MLA 5-50 H P ST5 S1 Type: Farm loader Drive type: Diesel Year of manufacture: 2023 Hours: 34 Length: 4490 mm Overall width: 1330 mm Net weight: 3650 kg Mast data Overall height: 2290 mm Engine < Drive: PERKINS 403J-E17T Description & Optional Equipment Front Tyre: Air Front Tire Size: 31 x 15.5 - 15 Front Tire Condition: 80 - 100% Rear Tires: Air Rear Tire Size: 31 x 15.5 - 15 Rear Tire Condition: 80 - 100% Tech. Condition: New Optical Condition: New Facilities Attachments: - Bulk material bucket Attachments: MANITOU Ground Shovel 1500 mm, 0.51 cbm, 4-point hook, BJ 2023 MANITOU Fork carriage with forks, CAT920/1200, 4-point hook, BJ 2023 Special equipment: - Rear work lights - Front work lights - Heating - Full cabin - CE certificate Auction-ID: 04F-SAW-3

Bodom needs to be renewed Manure cart can be converted into a tipping cart Auction-ID: A3-43524-11882

Manure spreader Brand: the campaign Model: FPB 10 L Year 1998 - 4 vertical hedgehogs - Heavy-duty chain - 2 fixed axles leaf suspension - Wheels 560/60R22.5 50% - Leaf drawbar suspension - Cab unloading gearbox - Hydraulic door ! 3 of the 4 hedgehog gearboxes have small cracks, does not prevent the operation of the machine in any way but, slight oil losses Machine in very good general condition + papers present. Auction-ID: A3-43524-33401

New, Suitable for Manitou, Attachment knife Auction-ID: A3-43524-36

Manitou quick coupler, double acting valve on mast, all papers for public roads available, Perkins engine oil consumption Auction-ID: A3-43524-276

Front and rear tires: 70%. Last inspection: May 1, 2025. Service history available. Day cabin. Power windows, Heated mirrors, Electric mirrors, Air suspension driver's seat, Heated seats, Airbags, CB Radio, Roof Hatch, Differential Lock, PTO, Engine brake, Double fuel tank, Alloy wheels, Sun visor, Particulate filter. MAN TGS 35.480 MTS 2 Turbine 2012, EURO 5, 244,000 km, Operating hours: FANS: 5489 | Compressor: 4710, Storage bin capacity: 10m3, Hydrostatic drive, IKE rotatable rotor head, MOT up to: 05-26, Hydraulic arm, Catch mouth. Auction-ID: A1-42016-14

Screw compressor CPA 10/10 DX 270, 1000 l/min, 10 bar Year of manufacture 2021 little run Features: Low-noise, complete & compact Designed for high performance, efficiency and reliability, this system is ideal for any workshop The extremely low noise level allows installation even without a separate compressor room The integrated dryer enables problem-free painting and sandblasting work. But even the usual air tools thank water-poor air with a considerably longer shelf life. The system is extremely easy to operate and maintain. Technical data: Type: CPA 10 DX Motor power: 7.5 kW/400 V Delivery rate: 1000 l/min Operating pressure: 10 bar Boiler volume: 270 l Refrigeration dryer: integrated Noise level: 66 db(A) Integrated star-delta switch Weight: 341 kg Length: 1200 mm (to the right there is space for the intake) Depth: 670 mm (space must be provided for suction at the rear) Height: 18 ...

Equipped with: Manitou, type MRT 1432 turbo, lifting capacity 3.2ton, lifting height 14.0mtr, cabin, ground bucket, pallet forks, safe-load indicator, rotating version, extra hydr. connections, 2 wheel, 4 wheel and crab steering, hydr. stabilizers/outriggers, range: 11.63 m, engine: Perkins 106 hp, drive 4x4, 2 electro-proportional joysticks, hydrostatic transmission, length (to carriage) 5,060 mm, width 2,390 mm, height 2,970 mm, wheelbase 2,320 mm, ground clearance: 340 mm, turning radius (tyres) 3,410 mm, 4 stabilizers (individually or simultaneously). Auction-ID: A1-40137-43

Manure clamp manure fork with hydraulic clamp, Euro connections for board and couplings approx 1900x800x1000mm Auction-ID: A1-40418-114

electric windows and mirrors, mirror heating, steering wheel controls, air conditioning, lock, digital tachograph, refrigerator, sleeping cabin, double fuel tank, starter breaker Auction-ID: A1-42016-21

Chassis number: AGCHEM2201377, Equipped with: Cummins 6CTA diesel (6-cylinder), Capacity: 8.3 litre, Power: ±240 hp, central lubrication, manual, without registration, 3mdouble-acting valves, rear linkage, hour reading: 6345. Auction-ID: A1-40137-73

Engine hours: 17606 hours, tire size front and rear: Michelin MegaXbib 1050/50R32, equipped with: tire pressure change system GPS preparation, hydrostatic gearbox, 19m3 tank, 3-point linkage, accord buck, multifast hydraulic clutch, four-wheel drive, lock, dog walk, suspension seat, camera system, 27mc, radio, air conditioning, Deutz V6 diesel engine, automatic lubrication system, pre-cut filter, Vogelsang 12m3 slurry pump, hydraulic suction arm, Auction-ID: A1-40137-113

In working order Table diameter (excluding clamping jaws): 135 cm Tree dimensions: height: 310 cm Length: 380 cm Width: 90 cm Features: Mobile control box Fuse box Vertically and horizontally adjustable column Tilting clamping table90 degrees ESAB Powermig welding machine Excluding pictured extraction. Auction-ID: A1-41995-10

2 bands, brush Instruction manual included Air shoes defective Electronics need to be repaired Veneer and varnish sanding only possible after overhaul and recalibration With blower without suction flaps Many replacement sanding belts of different grits Auction-ID: A1-46501-2084

Equipped with: reversing camera, work lights, lifting device, load sensing, 2x double-acting hydraulic valves, air pressure change system, hydraulic suction arm, DAF 6 Cylinder Auction-ID: A1-40137-21

Equipped with: Manitou MLT 737-130, 3,500 kg lift capacity, 6.90 meter lift height, ROPS/FOPS cab, max. range 3.90 m, Deutz TCD 3.6 L4, powershift, max. speed 40 km/h, hydrostatic/hydraulic system with load sensing pump, differential lock on front axle, oil-cooled brakes on front and rear axle, cab with JSM control, equipped with loading platform (see photo), tow bar, hydraulic quick coupler, aux.function, 7 pin plug, air conditioning. Auction-ID: A1-40137-38

Featured; Camera; (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-42016-17

Stehle Profile Cutter Head 134x80x30mm Auction-ID: A1-46501-2040

equipped with cutting cabinet, control panel, hose rack, air connection, Auction-ID: A1-40137-110

General description Set of 2 manual industrial presses suitable for light pressing, riveting, assembly, and small stamping operations. Compact and robust units for workshop use. Technical details Type: Manual presses (arbor / toggle type) Quantity: 2 units Operation: Hand-operated lever system Configuration: - 1x vertical arbor press (simple design) - 1x adjustable press with geared head and return spring Capacity: Estimated 0.5 – 2 tons Construction: Cast iron body Mounting: Bench or floor-mounted base Application: Pressing, riveting, bearing insertion, light punching and assembly tasks Equipment - Vertical rams - Hand levers - Flat die/work surfaces - Adjustable head mechanism (on one unit) Condition and remarks Used machines. Show typical wear from workshop use. Structurally robust and suitable for continued operation. Sold as a set. No electrical component ...

Technical details Manufacturer: REMS (Germany) Type: Manual pipe thread cutting die stock Operation: Ratchet type Thread size: R 1 1/4\" (approx. 1¼ inch) Thread standard: Likely BSPT (R thread) Marking: REMS / No. 43 Application: External threading of pipes Use case: Plumbing, industrial pipework, workshop maintenance Equipment - Ratchet lever - Die head / die stock - Thread size marking R 1 1/4\" Auction-ID: A7-46498-98

Technical details Manufacturer: Genkinger (Hermann Genkinger KG) Model: AE 3/6 Year: 1976 Type: Hydraulic lift table cart Operation: Manual hydraulic system (foot pump) Load capacity: 300 kg Own weight: Approx. 100 kg Configuration: Scissor lift mechanism Platform: Steel loading platform Mobility: Industrial castor wheels with push handle Application: Ergonomic lifting and transport of materials in workshop and production environments Dimensions and weight (approx.) Length: 800 mm Width: 600 mm Height: 900 mm Weight: 100 kg Auction-ID: A7-46498-123

Ingot / Bar Casting Moulds and Foundry Equipment General data: Equipment type: Casting moulds and handling tools for aluminium Application: Aluminium ingot / bar casting Main components: Long rectangular refractory-lined moulds (for aluminium bars/ingots) Multi-cavity cast iron moulds Smaller block-type moulds (stacked, for small ingots or test pieces) Handling tools: Manual ladles for pouring molten metal Tongs, rods, and skimming tools Additional equipment: Steel working table / rack Custom frame for holding moulds during pouring Description: Complete set of casting moulds and auxiliary equipment used in aluminium foundry operations. The system includes various mould types for producing ingots and bars, along with manual handling tools and support structures for efficient and safe casting processes. Auction-ID: A7-46498-19

Technical details Type: Industrial workbench station with tooling and storage Configuration: Multi-section steel workbench with integrated storage and tool wall Bench: - Steel frame with heavy-duty worktop - Length: Approx. 3000–4000 mm - Integrated drawers, shelves, and cabinet sections Tool storage: - Pegboard/tool wall with mounted hand tools - Plastic storage bins with components Additional storage: - Metal cabinet (2-door) - Drawer units and shelving Contents include: - Hand tools (wrenches, files, calipers) - Abrasives (grinding wheels, sanding belts) - Clamps, fittings, and mechanical parts Application: Manual assembly, repair, machining, and maintenance workstations Condition: Used, with wear, damaged work surface areas, oil stains, and mixed tooling condition Dimensions and weight (approx.) Length: 3000–4000 mm Width: 800 mm Height: 900 mm Weight: 2 ...

Various salt marsh holders, from various manufacturers. Auction-ID: A7-46538-38

Product Specifications Condition: Unused Type: Electric Year of construction 2026 Reading hours: 1 hour Performance Motor power: 0.8 kW Working height: 5900 mm Platform height: 3900 mm Travel speed: 3 km/h Drive: 2WD Platform Platform dimensions (L×W×H): 1280 × 760 × 1100 mm Platform capacity: 240 kg Maximum number of people: 2 Facilities: Power socket on platform Self-lock system Battery Capacity: 114 Ah Voltage: 24 Volt Dimensions & Weight Overall dimensions (L×W×H): 1490 × 760 × 2030 mm Own weight: 930 kg Other features Non-marking tyres Spoon slots (for forklift) CE certified Auction-ID: A1-46415-30

Pallet forks Hydraulic quick coupler Additional valves air conditioning Viewing by appointment Auction-ID: A1-40252-1

Mandam Hybro 4.0 H – Meadow harrow (built in 2022) General data • Machine type: Meadow harrow / grassland harrow • Manufacturer: Mandam • Model: Hybro 4.0 H • Year of construction: 2022 • Working width: 4.0 m • Net weight: approx. 1,060 kg • Condition: used, very good Technical equipment • First section with casting stars for levelling • Effective leveling of molehills • Crushing of organic material • Second section with harrow tines • Intensive aeration of the grassland scar • Preparation for grass reseeding • Robust frame construction • Three-point hitch • Optional retrofitting with pneumatic seed drill possible Condition • Visual condition: very well maintained • Technical condition: perfect • Mint Efficient grassland harrow for the maintenance, aeration and preparation of meadows – ideal for a sustainable  ...

Closed cab with heating Viewing by appointment Auction-ID: A1-40252-7

Lots of various chucks such as T812 Gr. 2, Adapt T212 Gr. XS, Adapt T212 Gr. 1 and T812 Gr. 3 incl. various accessories Transport dimensions: 1,200 x 800 x 400 mm, approx. 100 kg Auction-ID: A7-46660-18

Viewing by appointment Auction-ID: A1-40252-106

Manual press, column passage: 651mm; plate 500 x 500mm. Serial: 515988 Estimated weight: 300 kg Approximate dimensions: 1200x800xh1600 mm Auction-ID: A7-46655-183

Fully-automated yeast propagation plant with 2 cylindroconical tanks each 60 hl in stainless steel for yeast propagation and 2 cylindroconical tanks each 60 hl in stainless steel for yeast storage, A conversion and automation was carried out by Esau & Huber in 2007., 2 tanks for yeast propagation each: 80 hl total volume, 2 tanks for yeast storage each: 80 hl total volume, Material: stainless steel, Features: Yeast propagators and yeast tanks have a cooling zone + 1 cone cooling, PT100, weigh cells, circulation pump, yeast aeration

Floor planer / electrode welding machine see pictures Condition: unchecked (6) Auction-ID: A7-46642-178

Lot of gauges in different sizes and various adjustment rings Auction-ID: A7-46619-427