200 kva man used for sale

Technical data: Table load: 20 to. Table length: 2,000mm Table width: 2,000mm Table height: 930mm Table shift: 1,500mm Total power: 8.1 kW

manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990

Ladies and gentlemen, we may, on the basis of our general terms and conditions of delivery and payment for the trade in used machinery and equipment, offer you the following: Ladies and gentlemen, Offer: 1 piece br. Aluminium continuous casting plant, Make: SMS 3200 tons Price: € net, on request from the location. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection i ...

Cat. No. 06-1101-8 new with lid-round standing on feet from V2A – 2,000 litres top quality for the favorable price, the best high-grade steel to German Institute for Standardization welds minimally, stable feet standard equipment: material V2A, 1.4301 according to. German Institute for Standardization 17440, inside 3IIId=2B – outside marbles completely pickled, passiviert and neutralises rest outlet DN 50 level indicator with strip and scale swimming lid completely with accessories air-bleed valve and bleed valve air pump transport hooks for lid on / from state feet volume: 2,000 litres Diameter: 1,310 mm Cyl. Height: 1,500 mm Total Height: 2,165 mm feet: 3 surcharges upon request For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, exc ...

Manufacturer Engel Type ES 200 -50 HLST CC 100 Control CC 100 Built in 1997 Operating hours h 28000 Closing unit Closing force t 50 Opening path mm 450 Installation height min/max mm 200 / 650 Plate size 660 x 560 Spraying unit Screw diameter mm 30 Dimensions and weights Machine weight Kg 4700 Other

Rotary screw air compressor Atlas Copco 200 kW, max. 20 bar, 21,66 m3/min. New elektronikon controller at 20000 total hours. Real working hours 21409

TOX Power powerhouse in good condition Type K 4.200.20

technical data: Make: AEG Type: AM 200 L4 Connection: 380 V / 57 A kW: 30 kW rpm: 1470

Cat.-Nr. 11-3325 in a very good condition for Cosmetic and food stuff Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160 °C Temperature resistant Manhole and Sight Glass with lighting CIP cleaning injection nozzles aso. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-2525 in a very good condition Total height: 2550 mm Diameter: 1800 mm Outlet diameter: 80 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Capacity/h: 7500 Pa/h Condition: excellent, ready for operation Tetra Pak TBA 19 200 Base Line consists of: Tetra Pak TBA 19 250 Slim Line, Straw Applicator TSA Tubex 9001. Options: Packer, Conveyors,... To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.

Capacity/h: 7500 Pa/h Condition: excellent, ready for operation Tetra Pak TBA 19 200 Slim Line consists of: Tetra Pak TBA 19 250 Slim Line, Straw Applicator TSA Tubex 9001. Options: Packer, Conveyors,... To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers. Tetra Pak TBA 8 1000 sl with PT and TCAP ReCap 2 , used Tetra Pak, second hand Tetra Pak, TBA 8, TBA 9, TBA 19, TBA 21 Tetra Pak TBA 8 1000 sl with PT and TCAP ReCap 2 , used Tetra Pak, second hand Tetra Pak, TBA 8, TBA 9, TBA 19, TBA 21 Tetra Pak TBA 8 1000 sl with PT and TCAP ReCap 2  ...

; ready for operation

-Tischabmessung 800 x 380 mm -Formattisch 2000 x 270 mm -Besäumlänge 2000 mm -Max. Sägeblattdurchmesser 315 x 30 mm -Max. Schnitthöhe 90C / 45C 100 / 80 mm -Schnittbreite am Parallelanschlag 1250 mm -Tischhöhe 850 mm -Tischverlängerung 500 x 310 mm -Tischverbreiterung 800 x 880 mm -Auslegertisch mit Rolle 750 x 580 mm -Drehzahl Hauptsägeblatt 4500 U/min -Drehzahl Vorritzsägeblatt 8500 U/min -Vorritzsägeblatt 2-100 x 20 mm -Absaugstutzendurchmesser 100 mm -Motor-Abgabeleistung S1 100% 3,8 kW -Spannung 400 V -Maschinenabmessung (L x B x H) 2000 x 2800 x 1100 mm -Gewicht 310 kg komplett mit: -Aluminium-Formatschiebeschlitten mit gehärteten Führungsleisten -Stabiler Auslegertisch zum Bearbeiten von großen und schweren Platten -serienmäßig mit Tischverbreiterung und -verlängerung ausgestattet -Gehrungsanschlag und Niederhalter über die gesamte Schlittenlänge verschiebbar -S ...

Performance: 30 000 b / h

Technische Daten: - max. Schnitthöhe 200 mm - max. Arbeitsbreite 300 mm - min. Werkstücklänge 450 mm kontinuierlich - min. Werkstücklänge 635 mm einzeln - Vorschub 4 - 18 m/min. - Sägewelle ø 50 mm - Spindel ø 70 mm mit Büchse - Drehzahl 4500 Upm. - max. Sägeblatt ø 305 mm - min. Sägeblatt ø 250 mm - Motor Sägewelle oben 30 kW - Motor Sägewelle unten 37 kW - Motor Vorschub 3,0 kW - Motor Höhenverstellung obere Welle 0,37 kW - Motor Höhenverstellung untere Welle 0,37 kW - Motor Höhenverstellung Vorschubbalken 0,75 kW - Gesamtleistung 71,5 KW - Spannung 400 V / 50 Hz - Vorschubwalzen ø 140 x 35 mm - 2 x Sägebüchse mit je einem Satz Flanschringen - Rückschlagsicherung - automatisches Schmiersystem - automatischer Stern-Dreieckschalter - Absaugstutzen 2 x 150 mm - Arbeitshöhe 860 mm - Abmessungen L=295, B=1620, H=1770 mm - Gewicht 3100 kg

Säge: -Tischabmessung 860 x 450 mm -Tischhöhe 850 mm -Tischverlängerung 500 x 310 mm -Tischverbreiterung 800 x 880 mm -Auslegertisch mit Rolle 750 x 580 mm -Formattisch 2000 x 270 m -Besäumlänge 2000 mm -Max. Sägeblattdurchmesser 315 x 30 mm -Max. Schnitthöhe 90C/45C 100 / 80 mm -Schnittbreite am Parallelanschlag 1270 mm -Drehzahl Hauptsägeblatt 4500 U/min -Drehzahl Vorritzersägeblatt 8500 U/min -Durchmesser Vorritzersägeblatt 2-100 x 20 mm -Absaugstutzendurchmesser 100 mm -Motor-Leistung S1 100% 3,8 kW Fräse: -Spindeldurchmesser 30 mm -Höhenverstellung 100 mm -Tischöffnungen diam. 80 / 100 / 140 / 190 mm -Aufspannlänge der Spindel 100 mm -Max. Werkzeugdurchmesser -beim Profilieren 180 mm -beim Zapfenschneiden 200 mm -Spindeldrehzahl 1800 / 3000 / 6000 / 9000 U/min -Motor-Leistung S1 100% 2,8 kW -Spannung 400 V -Abmessung (B x T x H) 2000 x 3010 x 1250 mm -Gesamtgewicht 400 ...

2 piece Pneumatic slide valves DN 200, PN 10, with purging connection, AISI 316Ti with solenoid valve. Unit price, negotiable.

Antistatischer Polyurethanschlauch für die Holzindustrie, leicht + schwerentflammbar TIMBERDUC® PUR 531 AS  FI 200 mm (Innen) Anwendungen:  Absauganlage, Entstaubungsanlage, Filteranlage, Ölnebelabsaugung; explosionsgefährdeter Bereich; Holzstaubabsaugung, Holzspäne: Holzindustrie, Möbelproduktion, Sägewerk; Holzstaubabsaugung: CNC-Maschine, CNC-Bearbeitungszentrum (besonders für sich schnell bewegende); Faltenbalg, Kompensator Eigenschaften:  leichte Ausführung; hochflexibel + stauchbar 4:1; abriebfest; mikrobenfest; gute Öl-, Benzin- und Chemikalienbeständigkeit; schwerentflammbar nach: DIN 4102-B1; Wandung permanent antistatisch.  Durchgangswiderstand und Oberflächenwiderstand < 10? ?; gemäß TRGS 727 und ATEX 2014/34/EU: zur Aspiration brennbarer Stäube (Zone 22 im Inneren), zum Fördern für nicht brennbare Flüssigkeiten, zum Einsatz in Zone 1 und 2 (Gase); erfül ...

Swing mill for iron-free grinding or micronizing of chisels (solid sum content 70 - 78%), grinding chamber lined rubber, drive 22 kW. Task size: Up to 5 mm; final fineness: 4 microns. Last used grinding body: 7.5 to. Cylpebs, 20 mm x 20 mm (not included).

Vibration mill for iron-free ultra-fine grinding of slurries (70 - 78 % solids content), grinding chamber lined with rubber, 22 kW drive. Input size: Up to 5 mm; end fineness: < 4 micron. Used grinding media: 7,5 to. cylpebs, 20 mm x 20 mm (not included in scope of supply).

Säge-Fräse-Abricht-Dickte-Langloch Technische Daten: Abichthobel: -Arbeitsbreite max. 320 mm -Gesamttischlänge 1500 mm -max. Spanabnahme 5 mm -Abmessung Abrichtanschlag 1100 x 155 mm -Abrichtanschlag 90C-45C schwenkbar -Sicherheitsmesserwelle mit Wendehobelmesser FI 100 mm, Z 3 -Drehzahl 4600 U/min. -Motor Abrichte und Dickte 2,2 kW / 230 V Dickenhobel: -Arbeitsbreite max. 316 mm -Länge des Dickentisch 600 mm -max. Spanabnahme 4 mm -min. / max. Durchlasshöhe 4 / 230 mm -Vorschubgeschwindigkeit 7 m/min. -Absaugstutzen FI 120 mm Kreissäge: -max. Schnittlänge 2000 mm -max. Schnittbreite 630 mm -max. Schnitthöhe 90C 102 mm -max. Schnitthöhe 45C 72 mm -min. / max. Sägeblattdurchmesser FI 250 / FI 315 mm -Drehzahl 4000 U/min. -Länge Parallelanschlag 1100 mm mit Feineinstellung -Sägeblatt schwenkbar 90C - 45C -Motor 2,2 kW / 230 V -Absaugstutzen FI 120 mm -Vorritzaggregat 0,75 kW, D ...

Säge-Fräse-Abricht-Dickte-Langloch Technische Daten: Abichthobel: -Arbeitsbreite max. 320 mm -Gesamttischlänge 1500 mm -max. Spanabnahme 5 mm -Abmessung Abrichtanschlag 1100 x 155 mm -Abrichtanschlag 90C-45C schwenkbar -Sicherheitsmesserwelle mit Wendehobelmesser FI 100 mm, Z 3 -Drehzahl 4600 U/min. -Motor Abrichte und Dickte 3,0 kW / 400 V Dickenhobel: -Arbeitsbreite max. 316 mm -Länge des Dickentisch 600 mm -max. Spanabnahme 4 mm -min. / max. Durchlasshöhe 4 / 230 mm -Vorschubgeschwindigkeit 7 m/min. -Absaugstutzen FI 120 mm Kreissäge: -max. Schnittlänge 2000 mm -max. Schnittbreite 630 mm -max. Schnitthöhe 90C 102 mm -max. Schnitthöhe 45C 72 mm -min. / max. Sägeblattdurchmesser FI 250 / FI 315 mm -Drehzahl 4000 U/min. -Länge Parallelanschlag 1100 mm mit Feineinstellung -Sägeblatt schwenkbar 90C - 45C -Motor 3,0 kW / 400 V -Absaugstutzen FI 120 mm -Vorritzaggregat 0,75 kW, D ...

Pipe conveyor screw with 270 mm diameter and 5,200 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral rise: 125 mm.

Tube-type screw conveyor with 270 mm diameter and 5.200 mm conveying length (measurement taken between center input and center output). 5,5 kW drive via gearbox by Getriebebau Nord and jaw clutch. Shaft speed: 49 RPM; helix ascension: 125 mm.

Fig.1 screen master 2000 Regulating, control and recording device was used in a dairy to control and record the milk heater.

used approx. 2 m ³ / 2,000 litres polyester tank, GRP tank, transportation tank, Juno-tank, good condition Dimensions: L = 1.66 m 1.10 m = B; H = 1.50 m (without feet). H = (total) 1.75 m Aboveground vertical tank, incl. 4 steel feet/cones, dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers  ...

Batch horizontal mixer in standard steel version, lined inside with carbide, useful filling up to approx. 800 l.. Drive over 37 kW motor, Flender head gear and start-up clutch, equipped with 2 flanges for optional knife heads / choppers. Slingshot shaft with armoured Becker shovels (as good as new). Incl. basic frame for mixer, gearbox, fluid coupling and motor. Sandblasted and repainted.

Horizontal batch mixer in carbon steel design, hard metal lining inside, net capacity: Up to 800 l., drive unit: 37 kW drive, Flender gearbox and fluid clutch; equipped with 2 flanges for optional choppers. Shaft equipped with hard metal Becker shovels (mint). Incl. base frame for mixer, drive, clutch and gearbox. Sand blasted / complete repaint.

Ready to ship

Fireplace kits DOVRE 2000S The Dovre 2000S fireplace insert is made entirely of highly resistant cast iron. This fireplace is adapted for heating with hardwood or wood briquettes. The nominal heating power 2000S is 9 kW, maximum power 11 kW. Dimensions : L. 75 x W. 65 x H. 100 cm Request a quote on iNTER-WiBA Sp.J. WLL Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl ABC.inter-wiba.com.pl

Control cabinet EMS 2000 by Jenbacher J312 from 1997. If you are interested, we also have many spare parts for Jenbacher 312

Rotary vane vacuum pump - oillubricated Manufacturer: Leybold Type: Sogevac SV 200 Cat. No.: 10927 Status: Generalueberholt Gewawt: 12 months Inclusive: Oil filling (mineral oil), operating instructions with voltage: 50/60Hz 230-400/460V Engine nominal: 4 KW N.-Suction 200 m3/h final pressure or gas balast: approx. 0.08 mbar delivery time: from stock; ready for use

- Brikettdurchmesser 80 mm - Hydraulik Motor 11,0 Kw - Stundenleistung 90/210 kg/h - Luft-Öl-Kühlsystem - 7 Zyklen/min. - Brikettlänge max. 50 mm - Doppeltes Manometer - Ölstandssensor im Behälter und Temperatursensor - Schaltschrank mit SIEMENS SPS-Steuerung Touch screen - Betriebsstundenzähler - Schneckenkanal, Schneckenaustragung - Materialtrichter 1900 mm x 1600 mm - Ölkühler HYPERCHILL - Spannung 400 V/50 Hz - Abmessungen L=2000, B=1600, H=1230 mm - Gewicht 1550 kg

-Tischabmessung 715 x 640 mm -Tischabmessung Rolltisch (optional) 500 x 480 mm -Arbeitshöhe 910 mm -Spindeldurchmesser 30 mm -Schwenkbare Spindel -5C bis +30C -Höhenverstellung der Spindel 100 mm -Aufspannlänge 105 mm -Max. Werkzeugdurchmesser 200 mm -Max. Werkzeugdurchmesser versenkbar 180 mm -Frästischöffnung 200 mm -Spindeldrehzahl 1800 / 3000 / 6000 / 9000 U/min -Motorleistung 2,8 kW / 400 V -Gewicht 190 kg komplett mit: -Großer Arbeitstisch aus Grauguss -Geschwindigkeitsanzeige über LED Anzeige -stabiler Fräsanschlag mit Absauganschluss 100 mm -Serienmäßig mit schwenkbarer Spindel von -5C bis +30C -Dynamisch ausgewuchtete Frässpindel für präzisen Lauf -Serienmäßig mit 4 Drehzahlen von 1800 - 9000 U/min

- 6-Etagen - Pressfläche 3000 x 1300 mm - stabile Stahl-Heizplatten 42 mm mit Thermo-Ölheizung - Gesamtpressdruck 120 t (3,1 kg/cm2) - Öffnungsweite 80 mm - 8 Hydraulikzylinder dm 100 mm - Hydraulik Pumpe 7,5 kW - Heizplattenleistung 108 kW - Sicherheitsreißleine - Abmessungen 4300 x 1650 x 2520 mm - Gewicht 7900 kg

Technische Daten: - Wescottbohrfutter 0-20 mm - Verfahrweg quer 250 mm - Verfahrweg in die Tiefe 215 mm - Höhenverstellung 165 mm - schwenkbares Bohraggregat 45C-90C-45C - Absauganschluss 100 mm - Tischgröße 600 x 320 mm - Arbeitshöhe 870 mm - Motor 2,2 kW (3,0 PS) / 400 V - Drehzahl 2840 Upm - Einhebelbedienung - beidseitiges schwenken des Bohraggregates - Dübelbohreinrichtung mit 4 Rasterebenen 16-22-25-32 mm - Höheneinstellung über Handrad - Exzenterspanner - ausziehbare Tischverbreiterung - Gehrungsanschlag - Abmessungen L=1160, B=750, H=1080 mm - Gewicht 260 kg

Technische Daten: - 2 Spaene-Tonnen mit Klemmbuegel - Reststaubgehalt 0,1 mg/m3 - Ein- / Ausschalter - Volumenstromueberwachung - Druckdifferenzanzeige - Leistungsaufnahme 4,0 kW - Netzspannung 400 V / 50 Hz /3 Ph ~ - Filterflaeche 11,7 m2 - 30 Stück Filterschläuche - Filterregeneration automatisch, pneumatisch JET-System - Volumen-Staubtonnen 2 x 70 l - Ansaugstutzen 200 mm - Volumenstrom Nominal 3300 m3/h - Volumenstrom Minimum 2200 m3/h - Unterdruck 2600 Pa - max. Schalldruckpegel 72 dB (A) - Transport Abmessungen L= 2570 mm, B= 1.100 mm, H= 2.490 mm - Gewicht 400 kg

- Pressfläche 3000 x 1600 mm - stabile Stahl-Heizplatten 42 mm mit Thermo-Ölheizung - Gesamtpressdruck 200 t (4,2 kg/cm2) - 8 Hydraulikzylinder 120 mm - 2 kurze Hydraulikzylinder FI 80 mm - Schließgeschwindigkeit 20 - 60 mm/sec. - Öldruck 20 Mpa - Vorschubgeschwindigkeit 15 m/min - Heizplattenleistung 45 kW - max. Temperatur der Heizplatten 120 CC - Gesamtanschluss 10 kW - Abmessungen L=5500, B=4000,H=2250 mm - Gewicht ca. 8000 kg

Doka 3-ply sheets provide the basis for many Doka formwork systems and have a wide range of uses. Doka has the right solution for all requirement, covering anything from standard applications to rentable panels. Multiple use and prevention of positive imprints through closed surface on both sides coated with high-quality melamine resin. Lower costs for finishing work based on high dimensional and angle accuracy. Type: 3-ply formwork sheet made of spruce, crosswise glue-bonded, with edge strip Surface: urea-melamine resin adhesive high degree of format accuracy

Hall 8.000 m ², 40 x 200 m, 7 m high (eaves) steel Hall / steel construction, self-supporting,. -Sheet metal walls, w/o roof sheet, self removal -smaller units possible, German Hall

new ! all stainless steel speed : 27 rpm 2 mixing directions safety lid CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.400 x 1.000 x 1.600 mm

all stainless steel max. load 1.000 kg (depending on the product) with new control Variotronic with new vacuum pump Busch 63m³ 3 speed engine : 1 / 2,8 / 3,4 rp/min dimensions (l x dpt x h) : ± 2.080 x 1.560 x 1.920 mm

High Power oil-free compressor for workshops, offices, medical institutions and other places where regular compressors of the same size are too loud. Advantages of Aflatek SilentPro200-4: -Four 1100W direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily movable on 4 rubber wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, W: 4x1100(4400) Motor speed, Rpm: 1440 Air supply, L/min: 960 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 83 Air tank, L: 200 Dimensions(length x width x height), mm: 1500x500x670 Weight, kg: 120 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1580x550x930 Weight, kg: 140 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer ...

Included in delivery: 01x C-Profile, used Material color: sendzimir galvanized Total length: approx. 5,605 mm Profile abbreviation: C 200 x 80 x 35 mm Material thickness: approx. 2.00 mm Hole diameter: approx. 13 mm Weight / pcs approx. 38,75 Kg Note: - Since these are used goods, damage, Holes, welds, etc. rust deposits may be present. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shel ...

new all stainless steel discharging height ± 1.770 – 2.250 mm mobile

Was installed in a Husky injection moulding machine

For sale a CNG natural gas traportable bundle Wystrach 600 litre 200 bar. Operating pressure: 200 bar Built: 2005 steel-built Dimensions: 120 x 80 x 180 cm Weight: 1000 kg