129,021 used machines on RESALE, but how to find them? Machine Search
Built in: 1989 Size: max 1.700 x 1.300 mm lifting capacity: max 2.000 kg Stroke height: 1.000 mm ; working condition
Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 3500 mm Working height: 2300 mm Number of cylinders: 4 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max bending length: 1020 mm Max. sheet metal rod: 2 mm steel motor upper cheek adjustment via foot switch manual rear stop diverse bending rails
Number of sanding units: 2 St sanding width: 190 mm Sanding height max.: 2 - 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punching and forming center in chain with an assembly line for the production of relays, see pictures
Hydraulic unit 360 l, 2 x 11 kW, 2 memory More: Hydro-aggregate REXROTH DB 250-04-0, 1 memory, various valves Hydro-aggregator REXROTH, 60 l tank, various valves (see pictures)
Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 200 °C Torque: - 0 Dimensions (HxWxD): 680 x 1320 x 760 mm weight: 177 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fan Polytechnik L 200 Connection of 200 mm H x W x D: 650/1150 x 960 x 700 mm Built in 1982 Weight approx. 150 kg Masch. No. 82261 Speed 1400 rpm Leistutng 3410 m3 / h Engine 4 kW Pressing 238 mm / WS The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
0: 200 °C Torque: - 0 Dimensions (HxWxD): 680 x 1320 x 760 mm weight: 177 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
machine measurements: 2.900 x 700 x 1.700 mm machine weight: 400 kg power capacity: 2,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
various knife head fraesers / plan fraesers 200, 215 250 mm
Industrial washing machine for small parts Turbex Binitron 2000, machine no. 94252, 400V 50Hz 25A, see also pictures
Simonazzi Tribblock 100-100 15 100 spray heads, 100 filling valves and 15 capping heads. Performance: 0.5 lt / 32,000 FL/h 1. 0lt / 29,000 FL/h 1.5 lt / 22,000 FL/h 2,0 lt / 18,000 FL/h Machine in very good maintained condition
Autoclave/Hardening boiler Manufacturer: Scholz & Co. Year of construction: 1996 Working pressure: 16 bar Working temperature: 203° C Volume: 101.800 liters Diameter: 2,000 m Length: 26 m Charging medium: saturated steam Quantity: 9 pieces (all identical) The autoclaves could be inspected at every time! In very good condition!
Doppelschleifbock Manufacturer: FAMO Type: G-200 A Diameter of grinding wheel: 200 mm 0,75 kW 2800 RPM All information without guarantee
plate thickness: siehe TD mm pressure: siehe TD t total power requirement: 4 kW weight of the machine ca.: 0,950 t dimensions of the machine ca.: 900 x 1050 x 1300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Block vane pump DK200 Status: Rebuilt Warranty: 12 months Manufacturer: Leybold Type: DK200 Rated motor power: 5,5KW Nominal: 200m ³/h Final pressure without GASB.: small 5x10e-3 Accessories: operating instructions spare parts list Delivery: in the short term; ready for operation
sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2700 x 2300 x 1350mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 4mm total power requirement: 5,5 kW weight of the machine ca.: 2920 t dimensions of the machine ca.: 3600 x 970 x 1140mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 3 kW weight of the machine ca.: 1,28 t dimensions of the machine ca.: 2600 x 1350 x 1260 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Helium leak detector Manufacturer: Leybold Type: UL 200 Condition: Tested and ready to use Execution: Lubricated & dry available! Connection: 230V Time of delivery: 1 where. (u.ue.V.; ready for operation
Roots blowers Manufacturer: Leybold Type: RUVAC WSU 2001 Cat.-No.: 11741 Suction capacity: approx. 2000 m ³/h Status: Rebuilt Warranty: 12 months (image); ready for operation
Machine type water circulation cooling unit Merkle brand Type WK 200 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 590 x 200 x 210 mm Weight 15 kg Age 8 years Condition workshop checked as new Warranty 12 months from the date of delivery Original price 990,00 € + VAT Price 590,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our machine with 0%! We offer you ...
Rotary vane vacuum pump (roots blowers) Manufacturer: Pfeiffer Type: WKP 2000 A Suction capacity: 2065 m ³/h Engine: 5.5 KW Cat. No.: PP W61 000 Status: Rebuilt Warranty: 12 months Including: oil, manual; ready for operation
Material: Stainless steel 1.4301 Drive: 4 KW Weight: 1550 kg Area per deck: 2,6 m² Incl. 2 x ball knocking cleaning / 2 x sieve with mesh size choice: 0.1 5 mm.
Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-200 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner Alphaweld SR-26, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 ...
The CE10 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE10-200 50Hz 200 bar 21 l/min. CE10-200 60Hz 200 bar 25 l/min. General Specifications: ----- Power of the drive motor: 7.5 kW (50Hz) / 9 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.
MAZAK INTEGREX 200 SY + FLEX GL-100C. 2001. MAZATROL 640 MT control maximum turning diameter 540 mm Z-axis travel 1,065 mm Main spindle maximum RPM 5,000 rpm Main spindle full C-axis Counter-spindle maximum speed 6,000 rpm Y-axis +/-80 mm Milling spindle for turning and milling Spindle maximum speed 6,000 rpm Full B-axis, 225° Tool changer with 40 tool positions KM-63 tool mount Tooleye 1 x 3 - jaw Chuck, diameter 210 mm 1 x 3 - jaw Chuck, diameter 170 mm Gantry loader Flex GL-100 C. High pressure cooling through spindle, 20 bar Chip conveyor CE mark
Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Setting range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roller drive DV 26 Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Special accessories 4-roller gearbox DV 26 Age 6 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN 1 piece glass whi ...
The CE40 belongs to the series of our high-pressure machines with an electric drive for a pressure of 100 to 2000 bar and a volume flow of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal moldings and circumferential stainless steel side frames. The front wheel and the two large rear wheels including a parking brake ensure easy manoeuvring and stable stationing. A lifting eyelet facilitates transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 30 kW (50Hz) / 33 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A ...
The CE100 series is an electrically driven high-pressure machine for a pressure of 300 to 2000 bar and a volume flow of 21 to 135 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE100-300-135 CE100-500-80 CE100-1000-42 CE100-1400-28 CE100-2050-21 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 75 kW (50Hz) / 90 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 1800 mm x 1050 mm x 1400 mm Weight: 2000 kg Includes standard accessories.
MAZAK INTEGREX turning/milling center 200Y Bu. 1999 Mazatrol fusion control Max Drehdurchm. 520 mm Max Schwingdurchm. 540 mm Maximum turning length 1,018 mm Bar passage 51 mm C-axis + angetr. Tools Y-axis +/-70 mm Distance between the top 500 mm Drive 30 kW Maximum main spindle spindle speed 5,000 rpm Maximum speed milling spindle 6,000 rpm Tool changer with 40 stations 3-jaw Chuck 200 mm Tool measuring arm Tailstock Chip conveyor Total connected load 31 kVA Machine dimensions 3.50 m x 2.10 m x 2.50 m Machine weight 6,800 kG 25 tool holder KM 36 duty hours approx. 36,000
Technical data: -Equal water-cooled AC unit TIG TR 4,. -water-cooled MIG-MAG system DV - IV - XT - E. welding plant STH 400 for welding of: stainless steel, steel, aluminum, etc. -16 x welding program be selected with: -. Setting selection: Stick welding, Tig - welding AC / DC, MIG-MAG welding -Digital Volt + amp display -Welding current continuously adjustable by 10 A / 15 V to 400 A / 34 A - max welding current of 400 A max 60% ED 315 A 100% ED -Power 400 V / 43 A / 16 kVA -Heart monitor -Welding current rise - and welding power descent setting -Back fire setting -Gas before. - current setting -water cooled Tig welding - torch 8 m, lightweight design -E - welding cable + ground cable - water-cooled MIG - MAG torch â separate wire feed case DV - IV - XT for MIG - MAG welding -4 wheels - wire feed -Intermediate package welder - wire feed case 4500 mm -P ...
The CE125 series is an electrically driven high-pressure machine for a pressure of 200 to 2500 bar and a volume flow of 21 to 240 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE125-200-240 CE125-1500-35 CE125-2500-21 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 90 kW (50Hz) / 90 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Includes standard accessories.
Technical data: -Pressure capacity 2000 kN -Max working width 3100 mm -Stand round 3200 mm -Stand RADIUS 300 mm -Max mounted height 965 mm -Hub, or insertion depth Steplessly adjustable 0-400 mm -Plunger speed forward + reverse per 100 mm / sec -Operating speed in 9 steps selectable 1-10 mm / sec -Drive 400 V / 26.5 kW - space requirement approx. B H 4400 x 3500 X 2200 mm -Weight approx. 18500 kg -with: - CNC - control CYBELEC ModEva 15s BJ. 2007 -Back gauge with 4 controlled pneum. on the side and height-adjustable stop fingers -controlled bending AIDS in the velocity range -Hydr. -Pneum.. Clamp of the upper tool + substation witness -mot. Crowning / hydro cushion in the table -laterally movable support arms -E - foot switch -split pointed tool R 1-100 t / m, split die
Technical data: -Lifting capacity 2000 kg -max load capacity horiz. 3500 kp -Faceplate hub 1750 x 1750 mm -Drehkreuzverängerungen -Faceplate geared motor Tiltable 0-90 ° -Rotation Electr. adjustable 0.2-1.5 m / min -Right - left rotation - welding current transmission 1200 A -400 V - table height in horiz drive. Position with frame approx. 2070 mm -Table height at horiz. Position without stand approx. 940 mm -Space requirement approx. B 1650 x H 1130 / 940 x H 2500 mm -Weight approx. 2.2 t
The CE150 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and others see data sheet and on request. General Specifications: ----- Drive motor power: 90 kW (50Hz) / 110 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.
Spare welding controllers for resistance welding machines MPS 200mono MPS 200monoR1 MPS 200multi MPS 200multiR1
to the composed of angles by means of hot-melt glue to a Miter cut length of 100 mm
Type DTL-20A Brush roll height 200 mm Brush roll diameter 300 mm Roller speed: frequency control Electric up and down Power 0.75 kW Transport dimensions 860x750x1100 mm Weight 140 kg
The CE200 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 25 to 350 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others on request. General Specifications: ----- Power of the drive motor: 150 kW (50Hz) / 150 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.
Pressure capacity: 8000 kg Maximum cutting area - 200 mm2 for material strength 40 kg / mm2 Horizontal radius 200 mm Clearance between the side walls 160 mm Fixed hub 35 mm Pin hole in the Stossel 38 x 60 mm Adjustability of the Stossels 70 mm Weight of 400 kg of the Presse Operating instructions The machine is located in the new value. State, probably never in use. Control actuator Stober
The CD50 series of our high-pressure machines covers a pressure of 230 to 2000 bar and a volume flow of 7 to 74 l/min. The pump is powered by a water-cooled 4-cylinder Toyota diesel engine. The fully enclosed frame is made of hot-dip galvanized steel to ensure a long service life and corrosion resistance. The frame is primed and then painted. The machine only requires a footprint of 1550 x 920 mm. Under the frame 4 rubber feet are mounted. In addition, the machine has forklift pockets and lifting eyelets attached to all four corners. For the protection and storage of, for example, high-pressure hoses, a galvanized roof plate provides. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 100 ...
The CD100 series of water and water jet machines ranges from 250 to 2050 bar with pump flows from 21 to 167 l/min. The pump is powered by a water-cooled 4-cylinder turbo SISU diesel engine. The frame surrounding all frames is made of hot-dip galvanized steel to ensure long service life and corrosion resistance. It is primed and painted. The footprint of the machine is 2100 x 950 mm. The frames are equipped with rubber feet under all four corners and the machine has forklift pockets as well as hanging eyelets at all four corners. The machines have galvanized roof panels with side railings for the protection and storage of, for example, high-pressure hoses. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD100-250 250 bar 167 Lpm CD100-300 300 bar 135 Lpm CD100-500 500 bar 80 Lpm CD100-1000 1 ...
maximum number of results exceeded
please refine your search
