2 mw gas used for sale

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Manufacturer: Forkardt, power chuck type KSH 200 -Chuck size: Ø 200 mm -Jaw width: 24 mm -Passage: Ø 49 mm -Mounting: Cone Ø 105-102 mm -Thread: M52 -Dimensions: Ø 200 x 130 mm -Weight: 23.1 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 215 mm -Jaw width: 20 mm -Passage: Ø 52 mm -Mounting: Cone Ø 106-103 mm -Thread: M60 -Bolt circle: Ø 133 mm -Dimensions: Ø 215 x 90 mm -Weight: 19 kg

Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool carriage: support carriage support carrier -Support plate: 265 x 180 mm -Dimensions: see photos -Dimensions: 290/280/H70 mm -Weight: 21.1 kg

Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks -Manufacturer: Röhm, chuck flange for power chucks, three-jaw chucks, four-jaw chucks, faceplate -Type: 55021/22-6 Ø 210 mm -Bolt circle: Ø 133 mm -Dimensions total Ø 210 x 170 mm -Weight: 12.4 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Bruckner, rotating centering point centering cone -Type: unfortunately without type designation -Recording: MK5 -Centering tip: Ø mm -Dimensions: Ø 95 x 295 mm -Weight: 6 kg

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Manufacturer: Elsterwerda, magnetic clamping plate type ED 215 -Clamping surface: 200 x 150 mm -Connection: 220 Volt DC -Dimensions: 370/150/H80 mm -Weight: 14.3 kg

Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 1 inch 12 teeth -Type: 20B-2 1 1/4 x 3/4 -Shaft mount: inner Ø 50 mm -Dimensions: see photos -Total dimensions: Ø 138 x 80 mm -Weight: 3.8 kg.

Lifting strut, lifting gear, lifting drive, lifting linkage -Lifting strut: hydraulic lifting rod -Type: unfortunately no type designation -Part No.: 831/65 U10-2.8 -Dimensions: see photos -Dimensions: 1070/210/H130 mm -Weight: 12.7 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve -Morse taper sleeve: Extension sleeve MK4 -Dimensions: Ø 47/265 mm -Weight: 1.8 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, live center -Type: ZNB 204 -Recording: MK4 -Dimensions: Ø 100 x 215 mm -Weight: 3.5 kg

Analyzer, vapor pressure tester, Minivap VPS -Manufacturer: Grabner, steam pressure tester Minivap VPS -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm -Weight: 7.9 kg

Clamping rail, guide rail, support rail, stop rail, T-slot rail -Clamping rail: with T-slot on both sides -Length: 200 mm -Groove width: 10 mm, dimensions see photo technical drawing -Dimensions: 200/55/H32 mm -Weight: 1.9 kg

Clamping rail, guide rail, support rail, stop rail, T-slot rail -Clamping rail: with T-slot on both sides -Length: 250 mm -Groove width: 14 mm, dimensions see photo technical drawing -Dimensions: 250/56/H41 mm -Weight: 2.4 kg

gear, gears, gear shaft, pinion shaft -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 42 mm / 14 teeth -Tooth width: 83 mm -Dimensions: see photo technical drawing -Number: 9x gear shaft available -Price: per piece -Total dimensions: Ø 42 x 220 mm -Weight: 0.9 kg/piece

PLC controller, central assembly, RAM, CPU, central processing unit, central device -Manufacturer: Siemens, SIMATIC S7-400, CPU 414-2 WORK MEMORY -Type: 6ES7 414-2XG03-0AB0 -CPU: CPU 412-2 -Dimensions: 215/25/H290 mm -Weight: 1.0 kg

Clamping plate, marking plate, measuring plate, measuring table, surface plate, marking plate -Manufacturer: Stolle, clamping plate with support ribs -Length: 2005 mm -Width: 1500 mm -Plate thickness: 40 mm -Plate: with support ribs -Transport dimensions: 1500/2005/H500 mm -Weight: 1800 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1800 mm -Cross-section: 200 x 60 mm -Recording: see photos -Transport dimensions: 2060/1080/H200 mm -Total weight: 487 kg

Crane block, crane hook, load hook, single hook -Crane hook: Load hook load capacity 250 kg -Type: PNo 025 -Hook opening: 32 mm -Dimensions: see photos -Dimensions: 165/105/50 mm -Own weight: 0.9 kg

plastic strapping, strapping tape, packaging tape, tensioning tape, plastic tape -Strapping band: Plastic strapping band 8 rolls Ovp -Type: 5 x 0.5 mm core 200 mm -Width: 5 mm -Roll: Ø 395 x 190 mm -Price/Delivery: complete -Transport dimensions: 800/800/H390 mm -Total weight: 87 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: AROWA, three-jaw chuck chuck size Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 175 mm / M10 -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø200 x 105 mm -Weight: 13.8 kg

Bezel, moving bezel, steady rest, lynette -Bezel: moving -Tip height: see photos for dimensions -Dimensions: 220/195/H340 mm -Weight: 8 kg

Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: multicomp, axial fan type MCFS23092A/2092HBL.GN. Unused, original packaging. -Voltage: 220-240 V / 14.5 W -Number: 4x fans available -Price: per piece -Dimensions: 100/100/H35 mm -Weight: 0.3 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: TOS, three-jaw chuck chuck size Ø 125 mm -Passage: Ø 35 mm -Bolt circle: Ø 108 mm -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø125 x 70 mm -Weight: 4.1 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: HPI MEZ, hydraulic unit with double hydraulic pump -Hydraulic pump: HPI type 1BA2018/2008L10 -Engine: MEZ 7.5 kW 1450 rpm -Dimensions: 755/360/H305 mm -Weight: 94 kg

Cloth lapper, polishing disc, grinding disc, coarse cleaning disc -Manufacturer: 3M Scotch-Brite, coarse cleaning disc type CG-DC Ovp 2 pieces -Art.No.: 61163 -Diameter: Ø 200 x 13 mm -Shipping/Price: complete -Transport dimensions: 205/3205/H35 mm -Weight: 0.3 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 210/100/H105 mm -Weight: 7.7 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 210/70/H80 mm -Weight: 5,2 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 215/70/H105 mm -Weight: 5,1 kg

Tool holder, milling holder, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling holders: MK5 holder 3 pieces -Type: Shaft Ø 16x25 / 22x30 / 27x50 mm -Shipping/Price: complete -Transport dimensions: 225/140/50 mm -Weight: 4.8 kg/total

Extension for square, square extension, tap extension, thread cutter extension -Square extension: Tap extension Thread cutter extension -Square: 32 x 32 mm -Total length: 285 mm -Number: 2x extension available -Price: per piece -Dimensions: Ø55 x 285 mm -Weight: 3.1 kg/piece

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring elements: Machine feet 4 pieces for machine tools and systems -Support surface: 300 x 250 mm -Height: 35 mm -Price: complete -Dimensions each: 300/250/H35 mm -Weight 13.3 kg/piece

Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Roller stand: Roller stand for hacksaw, band saw, cold circular saw -Roll height: 445 to 565 mm -Roll: Ø 55 x 270 mm -Dimensions: 370/315/H445 mm -Weight: 22 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: holder Ø 213 mm -Mounting: Hole shaft cone Ø 56-59 mm -Type designation: not available -Dimensions total Ø 260 x 120 mm -Weight: 14.3 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: holder Ø 213 mm -Mounting: Hole shaft cone Ø 44-54 mm -Type designation: not available -Dimensions total Ø 230 x 85 mm -Weight: 10.3 kg

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers -Machine transport roller: armored roller -Load capacity: kg -Dimensions: 210/100/H65 mm -Weight: 5 kg -only 1 piece available

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers -Machine transport roller: armored rollers 2 pieces -Load capacity: kg -Shipping/Price: complete -Dimensions: 220/120/H75 mm -Weight: 7.7 kg/piece

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers steering gear -Transport roller: Transport chassis -Load capacity: t -Dimensions: 350/250/H145 mm -Weight: 17.3 kg

Compressor control, compressor control, control panel, control box, control unit -Manufacturer: Demag, compressor control from screw compressor type 350WS -Module: BT SBE 42008 TW-2294V-0 -Individual components: see photos -Dimensions: 395/105/H25 mm -Weight: 0.3 kg

Storage containers, transport storage containers -Manufacturer: Artur Scheffczik, steel storage container, mobile -Inner dimensions: 650/550/H480 mm / 275 liters -Substructure: with swivel castors, also suitable for forklift mounting -Dimensions: 660/575/H725 mm -Weight: 71 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Rexroth, standard cylinder double-acting type 0 822 241 050 -Stroke: 800 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -max. pressure: 10 bar -Dimensions: 960/50/H75 mm -Weight: 3.5 kg

Transformer, converter, three-phase autotransformer -Manufacturer: Siemens, Transformer Type: 4AV2000-2AB -(technical data see photos) -Dimensions: 100/95/H150 mm -Weight: 2.9 kg

Tires, solid rubber tires, forklift tires -Manufacturer: Rota, solid rubber tires 2 pieces -Tire size: 200/50-10 RIM 6.50F-10 -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm -Price/Delivery: complete -Dimensions: Ø 440 x 200 mm -Weight: 34.3 kg/piece

Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system -Container rotating device: 2 pieces -Rollers: Ø 100 x 37 mm plastic -Submission/Price: complete -Dimensions each: 260/230/H115 mm -Weight: 3.4 kg

Thread cutting machine, pipe thread cutter -Pipe deburrer: for thread cutting machine -Pipe size: up to inner Ø 58 mm -Dimensions: see photos -Dimensions: 270/250/H75 mm -Weight: 2.7 kg

Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Roller stand: Roller stand for hacksaw, band saw, cold circular saw -Roll: Ø 65 x 240 mm -Dimensions: 325/65/H520 mm -Weight: 8.7 kg

Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 272 mm -Holes: Ø 24 mm -Dimensions: see photo technical drawing -Dimensions: 300/125/H50 mm -Weight: 8.9 kg

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley type SPB -V-belt width: 17 mm -Socket: Cone Ø 100 - 107 mm -Dimensions: Ø 220 x 82 mm -Weight: 10.7 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 1 517 222 492 -Shaft: Ø 16 / 17 x 8 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 116/90/H120 mm -Weight: 2.7 kg

Simatic panel, operator panel, machine control, interface panel, operating unit, control panel, keyboard, control panel teach pendant -Manufacturer: Xycom, Operator Panel from OMSO CD Printing Machine -Type: 2005 -Dimensions: 420/280/H315 mm -Weight: 6.9 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 7 mm -Number of teeth: 264 teeth -Inside: Ø 80 mm -Bolt circle: Ø 120 x 22 mm -Quantity: 1x saw blade available -Weight: 10.3 kg