2 mw gas used for sale

PLC control, central module, main memory, CPU, central device, central processing unit, compact device, compact CPU -Manufacturer: Siemens, Simatic S7-200 CPU 222 compact device -Type: 6ES7 212-1AB22-OXBO -Number: 1x module available -Price per piece -Dimensions: 90/60/H95 mm -Weight: 0.2 kg/pc.

Lightbus combination input/output module, input/output module, parallel input/output, analog output -Manufacturer: Beckhoff, analog output -Type: M-2400 -Input voltage: 24V DC -Price per piece -Number: 2x available -Dimensions: 270/70/H75 mm -Weight: 1 kg/pc.

Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 18 teeth -Shaft mounting: Inner Ø 100 mm -Dimensions: see photos -Number: 2x gears available - Price: per piece -Overall dimensions: Ø 237 x 245 mm -Weight: 30 kg/pc.

Safety relay, safety controller, emergency stop switching device -Manufacturer: pilz, safety relay -Type: PNOZ 230VAC 3NO 1NC -Number: 4x relay available -Price per piece -Dimensions: 110/90/H80 mm -Weight: 0.7 kg/pc.

Contactor, semiconductor contactor, contactor, power contactor, time relay, motor contactor, auxiliary contactor -Manufacturer: Siemens, time relay type 7PU4020-2BB30 -Number: 1 piece available -Dimension: 95/20/H95 mm -Weight: 0.2 kg/pc.

Safety relay, safety controller, emergency stop switching device -Manufacturer: pilz, safety relay -Type: PNOZ X7 24VACDC 2n/o -Number: 1x relay available -Price per piece -Dimensions: 120/20/H90 mm -Weight: 0.2 kg/pc.

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate -Magnetic plate: clamping surface 800 x 250 mm -Voltage: 110V 1.7A -Transport box: included -Quantity: 1 piece available -Dimensions box: 1160/480/H250 mm -Weight: 112kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck Chuck size Ø 240 mm -Passage: Ø 53 mm -Bolt circle: Ø 70 mm -Weight: 27 kg

Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Manufacturer: Garant, shell end mill shell end mill -Type: H 40Ø x 20 x 16 H C7 Sp.224mm -Intake: with fitting groove -Cutting material: HSS-Co5 -Dimension: Ø 40 x 20 x 16 mm -Weight: 0.1 kg

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor with brake -Type: G12-10/DK 84-200L -Speed: 40 rpm -Power: 0.75 kW -Construction: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 65 -Brake: 5 Nm -Dimension: 570/235/H195 mm -Weight: 34 kg

Machine vice, sturdy vice, drill press vice -Machine vice: rotatable -Clamping jaws 265 x 70 mm -Clamping depth: 285 mm -Dimensions: 620/300/H210 mm -Weight: 81 kg

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal and round steel shears -Cutting insert length: 300 mm -Round steel: up to approx. 17 mm -Overall dimensions: 500/145/H1325 mm -Transport dimensions: 1000/145/H450 mm -Weight: 38 kg

Joint bearing, rod end, ball joint -Manufacturer: SKF, Rod end type SAL 50-TE-2RS -Thread: M52x3 -Dimensions: 250/110/H60 mm -Weight: 3.9 kg

Spherical plain bearing, rod end, ball joint head -Manufacturer: SKF, articulated rod Ø 30 mm -Joint head: 1x type S130ES-2RS / 1x without designation -Length: hole spacing 170 to 215 mm -Dimension: 240/75/H45 mm -Weight: 2.1 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: Bürkert, pneumatically operated 2/2-way angle seat valve -Type: 2000A 40.0 PTFE VA -Connection: DN40 PN16 -Dimension: 220/100/H240 mm -Weight: 2.9 kg

Disc valve, flapper valve, ball valve, butterfly valve, gate valve, gate valve, gate valve, sleeve valve -Gate valve: stainless steel sleeve valve type 2 CF8M 200 unused -Size: DN50 PN16 -Number: 15x sliders available -Price per piece -Dimensions: 100/100/H215 mm -Weight: 2 kg/pc.

Reflective light barrier, reflective light sensor, light barrier, light sensor -Manufacturer: Sick, Light sensor light barrier type WL27-2F431S09 -Connection: DC 10-30 V -Number: 11 sensors available Price: per piece - Dimensions: 130/80/H25 mm -Weight: 0.1 kg/pc.

Pressure switch, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure switch -Manufacturer: Dungs, gas pressure switch orig -Type: GW 500 A4 242485 -Control range: 0.1 - 0.5 bar -Pmax.: 2.0 bar -Dimensions cardboard: 75/70/H80 mm -Weight: 0.4 kg

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DN-125-250 S6 PPV -Stroke: 250mm -Piston: Ø 125 mm -Piston rod: Ø 32 mm / M24 x 2 -Max. Pressure: 10 bars -Dimensions: 530/140/H140 mm -Weight: 12.7 kg

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Manufacturer: Schmid, rotary table with three-jaw chuck -Type: TWS200 -Mouth size: Ø 200 mm -Dimensions: 250/250/H365 mm -Weight: 52 kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Manufacturer: DEC, ventilation hose ovp -Type: Greydec 100 - 203mm x 6 meters -ART.code: DG1203/6 -Dimensions cardboard: 400/220/H220 mm -Weight: 3.1 kg

Signal towers, signal lights, signal lamp, indicator light -LED lights: 7 pieces, accessories kromschröder DL, DG ovp -Type: 230V red/green Order No. 74923275 -Price: complete -Dimensions each: 110/15/5 mm -Weight: 0.01 kg/pc.

Funnel, extraction hood, filling funnel, drip tray -Extraction hood: can also be used as a filling funnel for e.g. conveyor systems -Design: sturdy steel frame, stainless steel funnel sheet -Opening: Ø 200 mm -Dimensions: see photos -Transport dimensions: 2020/910/H300 mm -Weight: 96 kg

Abrasive paper, emery paper, abrasive cloth, abrasive discs, abrasive bodies, bench grinder disc -Manufacturer: Rondo, bench grinder disc -Size/type: 200 x 32 x 51 -Material: SCg 80 I 5V40 -Weight: 1.7 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Towing cube: heavy version -Material: cast iron -Holes: Ø 25 mm -Dimensions: 505/200/H150 mm -Weight: 30 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, distributor drum, distributor roller -Distribution drum: Material stainless steel -Overall diameter: 290 mm, length 685 mm -Drum diameter: 205 mm -Hole: Ø 30 mm -Dimensions: Ø 290/685 mm -Weight: 10.8 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley Ø 243 mm -V-belt width: 17 mm -Taper socket recording: Ø 30 mm (can be changed) -Dimensions: Ø 243 x 30 mm -Weight: 5kg

Connector, plug, sensor module -Manufacturer: Phoenix Contact, Y-distributor 5 pieces ovp -Type: SAC-3P-M12Y/2XM12FS PE -Screw lock: M12 -Price/delivery: complete -Dimensions cardboard: 115/80/H30 mm -Weight: 0.1 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 100 mm -Dimensions: see photo techn. drawing -Dimensions: 250/120/H63 mm -Weight: 10 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Feed flange with drive pin -Outer diameter: 230 mm -Mount: Thread M165 x 3 -Mounting cone: Ø 90 to 110 mm, groove 70 x 16 mm -Dimensions: Ø230 x 160 mm -Weight: 9.4 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Stall bolts: Solar fasteners 49 pieces -Type: M10 x 200 -Price/Delivery: complete -Complete weight: 5 kg

Bending tool, die, lower knife, lower tool, lower jaw -Bending tool: from Lotze HDZK swivel bending machine -Widthen: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm -Total weight: 29.4 kg

Bending tool, die, upper blade, upper tool, upper jaw -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100 mm / M10 -Dimensions: see drawing in the photos -Dimensions: 2678/15/H57 mm -Total weight: 15.7 kg

Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100mm M10 -Dimensions: see the drawing in the photos -Dimension: 2678/6/H45 mm -Total weight: 5,6 kg

Radio system, antenna contact component, wireless RF modem, pico cell antenna -Manufacturer: CP Technologies, Pico Cell Antenna 2.4 GHz Ovp -Type: WAN-2185 -Number: 2 antennas available -Price: per piece -Cardboard dimensions: 280/240/H85 mm -Weight: 0.7 kg

Drill sleeve, round rack, rack, sleeve for drilling machine, bench drill, pillar drill, column drill, box-type drill, thread cutting machine, tapping machine -Drill quill: round rack -Recording: MK2 -Dimensions: see photos / technical drawing with dimensions -Dimensions: Ø 62 x 267 mm -Weight: 4.3 kg

Stainless steel tank, stainless steel tank, separator, filter tank, for plastic injection molding machine -Stainless steel tank: separator -Diameter: see photos -Reservoir: with sight glass -Total dimensions: Ø 248 x 435 mm -Weight: 17kg

Slewing bearings, slewing ring, single-row ball bearing, four-point contact bearing, gear ring, steering ring, -Slewing bearings -Type: Drawing No. 281.30.1200.013.11.1503 -Dimensions: see photos -Dimensions total: Ø 1395 x 90 mm -Transport weight: 240 kg

Conveyor belt, belt conveyor belt, metal conveyor belt, wire belt, link belt, round wire link belt -Conveyor belt: link belt stainless steel -Width: 1000 mm -Length: 2890 mm -Thickness: 4 mm -Transport dimensions: Ø 122 x 1000 mm -Weight: 32.7 kg

Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measuring technology, contact manometer -Manufacturer: Wika, Manometer Pressure gauge with contact device -Type: 233.50.100 Kont 821.1 16 bar -Screw connection: see photos -Dimensions: 160/130/H120 mm -Weight: 1.3 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, pressure gauge -Type: 0 to 250 bar -Screw connection: see photos -Number: 2x manometer available -Price per piece -Dimension: 100/85/H100 mm -Weight: 0.9 kg/pcs

Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: conveyor belt conveyor belt -Width: 600 mm -Length: 2290 mm -Thickness: 2 mm -Transport dimensions: Ø 100 x 600 mm -Weight: 2.6 kg

Proximity switch, proximity sensor, position switch -Manufacturer: Festo, proximity switch orig -Type: SMTO-1_PS-S-LED-24C 151685 -Number: 2x switches available -Price per piece -Dimensions packaging: 150/110/H20 mm -Weight: 0.1 kg/pc.

Proximity switch, proximity sensor, position switch -Manufacturer: Festo, proximity switch, original packaging -Type: SME-8F-DS-24V-K0.3-M8D 525 896 -Number: 20 switches available -Price: per piece -Packaging dimensions: Ø 100 x 10 mm -Weight: 0.1 kg/pc.

Proximity switch, proximity sensor, position switch -Manufacturer: Festo, proximity switch orig -Type: SME-8M-DS-24V-K-0.3-M8D 706 755 -Number: 2x switches available -Price per piece -Dimensions packaging: Ø 100 x 10 mm -Weight: 0.1 kg/pc.

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Round table. with three-jaw chuck -Chuck size: Ø 210 mm -Spindle bore: Ø 64 mm -Center height: 150 mm -Dimension: 310/250/H260 mm -Weight: 47 kg

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, rotary dividing table -Rotary table: Clamping surface: Ø 235 mm -Middle hole: Ø 25 mm -Groove width: 14 mm -Number: 2x round table available -Price per piece -Dimensions: 330/310/H110 mm -Weight: 28.8 kg

Slack adjuster, manual adjuster, slack adjuster, brake slack adjuster, brake adjuster -Slack adjuster: for brake system -Type: BXL 281966 -Toothing: 10 teeth Ø 38/31 mm -Number: 2 available -Price per piece -Dimensions: 215/100/H70 mm -Weight: 3.2 kg/pcs

Abrasive paper, emery paper, abrasive cloth, abrasive discs, abrasive bodies -Manufacturer: Tyrolit, grinding wheel 200x120x51.A170x80 unused original packaging -Type: SK-140499B.EOOB -Number: 3x grinding wheel available -Price per piece -Dimensions Ø 200 x 120 mm -Weight: 3.3 kg

2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Manufacturer: Fibro stamping tool column frame -Type: 201.31.056. DIN 9822 C 100x80 -Die stamp: see photos -Dimensions: 340/160/H235 mm -Weight: 23 kg