180 fp used for sale

Dry self-priming high-pressure pump with diesel engine and a pressure of 26 bar. With its 205 kW engine power, this high-pressure pump achieves a capacity of 250 m3 per hour. The pump is equipped with a bronze impeller. This makes the pump an excellent choice as a booster pump, irrigation pump or high-pressure pump for pressing storage tanks during tank tests. The pump is mounted in a sound-absorbing casing with a diesel engine and vacuum system. This limits noise pollution for the environment., The diesel high-pressure pump is often used in industry as a booster pump or pressure pump for tank tests and cooling water applications. As a booster pump, the high-pressure pump is placed behind a larger pump to pump away the output with more pressure. This gives you more pressing power to bridge longer distances, for example. Specifications, , Connection pressure () • 6, Connection suction ( ...

Manufacturer: CIMA Model: CI Master 1800 Year of Manufacture: 2019 Type of Machine: Extruder Builder Extruder Size: 90mm Pin Extruder (suitable for tire sizes from 17.5R25 to 26.5R25) Configuration: Cold feed extruder with barrel Control System: Allen-Bradley PLC equipped Cooling System: 4x zone temperature-controlled cooler (Hot/Cold) Power Supply: 380V Air Requirement: 8 bar input Expandable Rim Options: 25”, 22.5”, and 20.5” sizes Condition: Brand New Useful for building TBR and OTR tire sizes Find more here - / Contact us at -

Chiller, chiller make AxAir, 180 Kw, R410A, with 4 compressor

Brand Metso Type Pump Model USHM 75 |180 w9Hc Chassis number 3013720100101,00 Year of construction 2011 Weight 0.5 ton Assets 11Kw Length mm 3200 Width mm 700 Height mm: 1100 Transport dimensions L x W x H 3.2 x .07 x 1.1 State machine Good Type of control Automatic Electrical connection 32A 5p Photos/film available: Yes

Casing in machine 35 cm width Very good condition

: GoodAire 1800 output: 1.800 cbm/Stunde weight of the machine ca.: 200 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1800 mm table load: 12,5 t total power requirement: 10 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features Telescopic covers for the guides. Infinitely variable table feed. Optical display for setting and reading the longitudinal adjustment. Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power ...

Machine to combine book blocks with book covers Equipped with Metris MT P120vB Book height : Standard 80 - 340 mm (XL 80 - 450 mm) Book thickness : 110 - 450 mm Block thickness : 2 - 80 mm Output : 200 - 300 books/hour

Transport length: 2700 mm band width: 450 mm dayligth: 600 mm width: 600 mm 0: 1750 mm total power requirement: kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height: approx. 230mm, center width: approx. 1000mm, orbital diameter over bed: approx. 480mm, orbital diameter over support: approx. 200mm, spindle bore: approx. 45mm, spindle speed range: 2000rpm, drive power: 4kW, machine dimensions X/Y/Z: approx. 2400mm/1000mm/1500mm, weight: approx. 1700kg. On-site inspection is possible.

thread dia.: 12 mm : 375 U/min. working area: 180 - 2000 mm engine output: 0,7 kW weight: 28 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M3 - M16 mm : max. 187 U/min. working area: 180 - 2000 mm engine output: 0,7 kW Electric tapping machines for M3 - M16 thread, Angle adjustable. 9 pcs. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. optional: Clamping table with T-slots: 990x700x800mm. Magnetic base. Also available: M14 to M24 and M27 to M33. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible

weight max. in kg: 2000 kg fork length: 1800 mm stroke height: min 85, max 200 mm : 155 mm length in width: 540 mm number of wheels: 4 vorne, 2hinten tire equipment: PU/PU fork arm (length x width x thickness): 1800 x 155 x 50 mm weight of the machine ca.: 0,088 t dimensions: 2,15 x 0,54 x 1,20 m SPECIAL PRICE ! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 1113-23 turning length: 500 mm turning diameter: 220 mm chip conveyor: ja kW : Werkzeugwechsler 12-fach spindle turning speed range: 5000 U/min tail stock: automatisch Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding current: 5 - 160 A connected load frequency: 230 V weight: 7,9 kg Dimensions (LxWxH): 310 x 140 x 230 mm ESAB inverter TIG welding machine Rogue ET 180i CE TIG DC An excellent high-frequency TIG ignition ensures a faultless welding start, as well as even and stable arc properties. Easy to use - setting up the welding parameters is simple and intuitive. Robust design IP23S housing for applications in production plants and on construction sites. Comprehensive TIG functions for optimal process control for every application and a pulse function of up to 500Hz to control the ideal heat input. A PFC module ensures a stable arc and insensitivity to mains fluctuations - even when working with long extension cables of up to 100 meters (PRO version only). Optionally, the welding current can be set from the TIG torch, foot pedal or hand-held remote control. technical data: Primary voltage,  ...

diameter: 0 mm workpiece length: 1000 mm work piece width: 875 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC deburring/brushing cell, tool magazine, SIEMENS 510, 5 axes CNC Controlled Flexible Brushing and Deburring Cell The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two low-speed Zerma beside-the-press grinders are available. 1) Zerma GSL-180/430, year of manufacture: 2003, rotor diameter: 180mm, rotor width: 430mm, rotor speed: 150rpm, drive power: 4kW, number of rotor knives: 45, number of stator knives: 2, min. sieve hole diameter: 5mm, weight: approx. 250kg. 2) Zerma GSL-180/300, year of manufacture: 2003, rotor diameter: 180mm, rotor width: 300mm, rotor speed: 150rpm, drive power: 4kW, number of rotor blades: 30, number of stator blades: 2, min. screen hole diameter: 5mm, weight: approx. 250kg. Documentation available. On-site inspection is possible. Individual sale possible.

Suitable for cleaning cooling oil for grinding hard metal., container content: approx. 500 l, Filter performance: approx. 180 l/min, Filter fineness: >0.003mm, Connected load: approx. 4 kW (400 V/ 50Hz), Dimensions: W x D x H approx. 1600 x 1000 x 1000 mm, weight: approx. 1000 kg, mass: about 1000 kg, colour: light gray

SALMON SLICER, CP FOOD MODEL: SILK CUT SLICER TYPE: SC 180 Technical description: Serial number: :7527 Power supply: 230/240 V, 1 Ph, 50/60 Hz, 7.5 A, 1.0 kW Inlet: Plastic wire belt, belt widht: (2x) 180 mm Outlet: Plastic belt, belt widht: (2x) 200 mm Plastic rollers, rolers widht: (2x) 200 mm Dimensions: 1800 x 1000 x 1550 mm The machine is designed for slicing smoked salmon, trout and Greenland halibut without bones or skin, and with a temperature of about ?2 - +2? C. Its important that the fish has the correct temperature.

Axes: 4, load capacity: 180kg, working radius: 3200mm, positioning accuracy: +/-0.25mm, max. total load: 430kg, cycle output: 30/min. Control: KR C2: max. control axes: 6, weight: approx. 35kg. Robot weight: approx. 1200kg, dimensions X/Y/Z: approx. 1200mm/1800mm/1700mm, robot set-up dimensions X/Y: approx. 1000mm/1000mm, operating hours: approx. 46000h. Documentation available. An on-site inspection is possible.

power capacity: 18,5 kW volt: 400 V ampere: - A total power requirement: 18,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: - m N0. 4700 Parallel shaft geared motor / geared motor NORD / Getriebebau NORD SK 6282 AZ - 180 M / 4 TF H2 n 155 min-1 / max. 2454 Nm / i = 9.39 / hollow shaft Drive: 18.5 Weight approx. 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 1800 mm travel -y axis: 520 mm travel -z axis: 520 mm tool taper: SK 40 table load: 3 t tool piece magazine with: 30 Plätze spindle drive: 22 kW max. torque on the spindle: 220 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5000 kN

Offer(4x): Engel Duo 1800/500 BJ./YEAR 2016 38500h

Automatic water filling system for up to 18.000 bottles per hour. - Including feeding system for empty bottles to the 40-head rotary rinser. - Rotary filling station (40 heads) with gravity filling principle. The capping unit is working with 12 capping heads and is suitable for 28 and 30mm PE standard caps. - All product contacting parts are made of SS304 or standard food package plastic. - The frame is made of high quality carbon steel Q235 (optional SS304). - MITSUBISHI PLC, WEINVIEW Touchscreen, Specifications: productivity 6.000-18.000 bottles per hour, number of rinsing heads: 40, number of filling heads: 40, 12 capping heads, bottle volume: 350-2000ml, bottle diameter: 50-90mm, bottle height: 150-310mm, filling tolerance: +/- 2%, compressed air: 0.5m?/6bar, filling water: 9m?/h, rinsing water: 3m?/h, power: 380V, 7.5kW, machine dimensions: L4300xW3400xH3050mm, 12.000kg. Please note ...

Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 1500-1800kg/h (with max. 5m conveying distance) |housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 60L/min | power supply: 220V | power consumption: 5.5kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Building width 9 m Length 18 m Height 6.2 m Wind zone 1 Snow Load Zone 2 Monopitch roof inclination 10 degrees.

Sunnen 1804 Honing machine, manual very good mech condition The machine can be seen working in our warehouse in Gussago BS. Test run possible Mimu Machine Tools, Honing dia (min-max): 1.5-120, Honing length (max): 250

Manufacturer: Engel Model: Victory 1800/ 260 Year of Manufacture: 2008 Specifications: - Clamping Force: 260 tons - Screw Diameter: 60 mm - Operating Hours: 88,266 Find more here - / Contact us at -

degree: 700 Grad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center width: 1000mm, turning diameter over bed/crank/trolley: 360mm/510mm/205mm, spindle bore: 42mm, speed: 2100rpm, machine dimensions X/Y/Z: approx. 1950mm/900mm/1350mm, weight: approx. 750kg. On-site inspection is possible.

Key data: 400 mm

CNC Universal Cylindrical Grinding Machine with Internal Grinding Device External and internal grinding AZ Model RUX 1800 Year of manufacture 2018 Siemens Sinumerik 840D controller Grinding diameter 400 mm Center width 1900 mm Workpiece weight without steady rest 650 kg Grinding wheel diameter 660 x width 100 x bore 305 mm Grinding wheel spindle speeds 300 - 1500 rpm. Manually rotatable grinding wheel head 0 - +20° Internal grinding spindle Grinding wheel size 115 x 49 x 55 mm X-axis 480 mm Resolution 0.0001 mm Feeds 0.01 - 5,000 mm/min. Z-axis 2740 mm Resolution 0.0001 mm Feeds 0.01 - 5,000 mm/min. HEADSTOCK Speeds 5-400 rpm. Bezel SMW AUTOBLOK Premium Line Coolant Setup Offer number V-7059

Faltschachtelklebemaschine / Folder Gluer Lamina 1800GL WS Year 2016 - 1037516 Manual fed in-line folding, gluing and taping machine Format min. 70mm - max. 1800mm Nordson hotmelt Gluing Unit - 2 gluing hedas Speed 0-40 m/min PLC control with touch screen The Lamina Gluer is a manual fed in-line folding, gluing and taping machine. By the genius construction it is able to handle various sizes of different materials. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc.

Two identical Burkle curved belt conveyors are available. Effective width: 400mm, length: 1800mm, feed rate: 37m/min, curvature: 90°. Documentation available. On-site inspection is possible.

Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial-No.: 637 Contact length., effective: 1600 mm Gum pad width: 180 mm Design: smooth gum pads at the bottom and top Haul-off force: approx. 20,000 N Haul-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm (LxWxH) Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.

Inv. Num. : 8511 Type: J100ADS-180U 45 Producer: JSW Created: 2023 Parameters: Total number of injections: 6800 Operating hours: 60 h Panel dimensions: 630 x 630 mm Clamping force: 1000 kN Screw diameter: 45 mm Injection capacity: 223 cc Injection mass: 203 g Maximum distance between mounting plates: 910 mm Distance between uprights (horizontal): 460 mm Distance between uprights (vertical): 460 mm Maximum spray pressure: 157 MPa Opening of the mold: 360 mm Max. speed: 400 mm Machine length: 4950 mm Machine width: 1230 mm Machine height: 1670 mm Injection weight: 4600 kg Equipment: Manual Spares 1x SHINI SAL-3U-CE Suction Device 1x SHINI Vacuum Aspirator Molecular Dryer SSD120U-80H SHINI STM-607-W-CE Temperature Controller SHINI SIC-7.5A-R2 Cooling Unit Double dosing of SHINI SCM dye

Clamping force 1800 kN. Extruder S 120/28D. Accuhead 25 ltr with 100-point programming. Die dia min/max 150/450 mm

Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-1800 L , Capacity: 1930 Litres , C ...

Key data: 160 °C, 20 kW

Temperature control unit of the tools - Single STW 180/1-18-70-N1.1 (2 pcs.) Year of Make: 2013 Location: Lodz, Poland Description: Max. heating capacity - 160°C Heat transfer medium – water Power: 20 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Working widths: 1800 mm roll surface width: 2000 mm diameter: 220 mm rubber quality: Weichgummi rubber: R89, gelb Shore: 75° shore type: 222.11/1800 1 pair of rollers (piece) for dyeing padder 222.11 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1800 mm y-travel: 700 mm z-travel: 700 mm control: Heidenhain iTNC 530 table surface area: 2100 x 700 mm table load: 1500 kg turning speeds: 20 - 18000 U/min taper ISO: SK 40 spindle motor: 35 / 25 kW rapid traverse: 40 m/min tool change unit: 60 -fach dimensions of the machine ca.: 5,5 x 3,5 x 2,7 m total power requirement: kW weight of the machine ca.: 14 t - Control Heidenhain iTNC 530 - 5-axis - Fixed table with integrated rotary table dia. 750mm (500kg) - IKZ 40 bar - Tool changer 60-fold (SK 40) - Milling head with B-axis - Chip conveyor - Spray gun - 3d Quick Set - BLUM laser measuring system - Direct distance measuring system - 2 Rotary Clean Windows - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lot de 6 broyeurs ZERMA GSL 180 / 430 à vitesse semi lente , équipes d’un rotor de 180 mm avec une largeur de 430 mm Le rotor est directement entrainé par un motoréducteur . La faible vitesse du rotor réduit le bruit et génère moins de poussières. La forme des couteaux permet un affutage aisé et un remontage aisé sans réglages L’accès en ouverture rapide permet d’enlever rapidement la plaque avant pour la maintenance et le nettoyage. Caractéristiques Diamètre rotor: 180 mm Largeur rotor : 430 mm Vitesse rotor. : 150 tour/min Puissane moteur. : 4 KW 45 lames mobiles 2 lames fixes Poids : 250 kg

L + Z lathe COLCHESTER / HARRISON type Student 1800Masch. No. 4/0023/08817 Year of construction approx. 1985Center width 635 mmTurning diameter over bed 330 mmTurning diameter over face slide 210 mmCenter height over bed 165 mmCenter height over face slide 105 mmSpindle bore 42 mmFeed longitudinal and planeChuck intake Short taper DIN 55029 D1-4 Camlock 63 mmTailstock inner taper MK 3Quill adjustment 110 mmSpindle speed 22 - 1800 rpm. 16 stepsDrive power 2.2 kWWetz connection

A two-component injection moulding machine Engel with piggyback configuration, including Engel Viper 40 robot and safety enclosure, is available. Clamping force: 1800kN, nozzle diameter: 35mm, min. mould installation height: 270mm, max. platen distance: 1020mm, tie bar spacing: 980mm, centering: 180mm. Screw diameter 1/2: 22mm/15mm, injection pressure 1/2: 2392bar/2203bar, injection weight 1/2: 66g/19.5g. Robot year of manufacture: 2014, robot travel X/Y/Z: 700mm/1300mm/2360mm. Machine dimensions X/Y: approx. 6700mm/2100mm, control: CC400, operating hours: approx. 38567h. The 22mm screw needs to be replaced. Without conveyor belt. Documentation available. An on-site inspection is possible.

mobile Air filter extraction box Box with built-in fan and filter cartridge. With HEPA filter. for ventilation, room air filtration and extraction. extraction capacity ca 1800m3/h extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Systemair RTRE 5 transformer controller 4 pcs filter cartridges 1 pc ULTIMA RP Hepa filter 3000m3/h Aluminum frame housing, mobile brakeable wheels dimensions: 100x100x80 cm weight: ca 120kg

Transnorm roller conveyor ejector GF1800-600-550 RA2429 Make: Transnorm Roller width (RB): 550 mm, Steel rolls Nominal/outer width (NB): 600 mm length: 3715mm Overall height frame: 130 mm Frame / 300 mm discharge conveyor Rolls diameter: 50 mm Pneumatic control of the rollers 4 rows of discharge rollers including tensioning station for belts Without drive station, please contact us for this Scope of delivery: with supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: scope of delivery: ohne Motor, without supports and side guides Roll width in mm: 550 Bauhöhe in mm (BH): 130, 300 Conveying length in mm (NL): 1800 Frame width in mm (NB): 600 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your p ...

Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2014 Roll division in mm: 65 scope of delivery: inklusive Frequenzumrichter, without supports KW: 1,5/S1 Electric data: 380-500 Bauhöhe in mm (BH): 250 Roll width in mm: 685 angle: 45° Links Conveying length in mm (NL): 1800, 2500, 3180 Frame width in mm (NB): 700 For individual, professional advice, simply contact us. Simp ...

Compressor Type Champion 180 TS Properties: Identification number 449001/158 Order no. 10095340 Built-in compressor 158 Compression medium AIR Length 3050 mm Width 2100 mm Total height 2100 mm Weight 3860 kg Flow rate 17.0 m³/min Suction pressure 1 bar Step pressures 22 / 12 bar g Speed 1000 min ̄¹ Installed engine power 110 kW

Height=1.06 m, Overall length= 2.22 m, Overall width= 1.12 m, Net weight= 977 kg,

Manufacturer: Winfos Model: YC 180 Year of Manufacture: 2010 Type of Machine : Longitudinal Slitting Line In operation since: 2017 Condition: Operational Technical Specifications: - Line length: 24.5 m - Line width: 7.8 m - Material thickness: 1.5 ~ 5.0 mm - Maximum coil diameter: 1.8 m - Coil inner diameter: 640 – 800 mm - Maximum coil width: 1500 mm - Maximum coil weight: 16 MT - Installed power: 253 kW Line Speed: - At 1.5 mm thickness: 110 m/min - At 4.0 mm thickness: 95 m/min Tooling & Accessories: - Knives – 186 pcs total: - Set 1 – 10 mm, Ø307: 26 pcs - Set 2 – 14 mm, Ø315: 66 pcs - Set 3 – 14 mm, Ø315: 50 pcs - New Ø320: 44 pcs - Rubber rings – 93 pcs total: - Set 1 – 25 mm: 31 pcs - 15 mm: 12 pcs - Set 2 – 25 mm: 31 pcs - 15 mm: 18 pcs - Set 3 – 25 mm: 31 pcs - 15 mm: 18 pcs - Slitter knife spacers: 480 pcs - Separator spacers: - Metal: 252 pcs - ...