We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,376 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
adjustable gear motor, variable speed gear motor, electric motor -Manufacturer Motor Motovario Type: TK/002/F -Motor power: 0.37 kW -Speed range: 360-1760 rpm -Motor: adjustable -Construction: B5 -Drive shaft: Ø 11 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 320/140/H170 mm -Weight: 9.2 kg
used
Gear motor, electric motor, three-phase motor -Manufacturer gearbox Lenze type: GST03-2MVBR063C32 -Manufacturer motor Lenze type: MDEMA1M063-32 -Power: 0.18 kW -Speed: 174 rpm -Shaft: Ø 20 mm -Construction: B3 -Protection class: IP 55 -Number: 2x motors available -Price: per piece -Dimensions: 330/118/H160 mm -Weight: 5.9 kg
used
Electric motor, three-phase motor -Power: 5.5kW -Speed: 1730 rpm -Shaft: Ø 28 mm -Construction: B35 -Protection class: IP 54 -Number: 1 piece available -Dimensions: 420/340/H265 mm -Weight: 64kg
used
Electric motor, three-phase motor -Power: 4 kW -Speed: 1740 rpm -Shaft: Ø 32 mm -Construction: B3 -Protection class: - -Number: 1x available -Price: per piece -Dimensions: 430/360/H285 mm -Weight: 58 kg
used
adjustable gear motor, variable speed gear motor, electric motor -Gearbox manufacturer: AEG -Engine manufacturer: AEG -Motor power: 0.175 kW -Speed range: 450-4000 rpm -Motor: adjustable -Construction: B3 -height of the shaft axis: 80 mm -Drive shaft: Ø 14 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 380/200/H240 mm -Weight: 22 kg
used
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 170 rpm -Power: 1.5 kW -Construction: B5 angle -Diameter shaft: 24 mm -Protection class: IP 54 -Dimensions: 560/270/H210 mm -Weight: 40 kg
used
adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 24.3-170 rpm -Motor: adjustable -Design: B5 angle -Drive shaft: Ø 19 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 535/240/H230 mm -Weight: 15 kg
used
Pneumatic cylinder ORSTA ND6,3A 40x170 TGL 20744 stroke: 170 mm piston diameter: Ø 40 mm rod diameter: Ø 14 mm rod thread: M8 x 1.25, length: 20 mm nominal pressure: 6.3 kp/cm² ( approx. 6.2 bar ) 2x flange: Ø 36 mm / 56 x 56 mm per flange 4x threaded hole: M6 x 1.0, depth: 25 mm hole spacing: 40 mm New ! dimensions: 325 x 56 x 56 mm
used
Installation kit, shaft gearbox, gearbox HARMONIC DRIVE ANTRIEBSTECHNIK series CPL-2A CPL-17A-120-2A-SP article number: 1021350 series: CP l Size: 17A reduction ratio: 120 version: 2A Special version: SP Speed: max. 10000 rpm Rated torque : 24 Nm Shaft diameter: Ø 18 mm flange diameter: Ø 60 mm New, with backings ! Dimensions ( packaging ): 260 x 100 x 95 mm
used
Installation kit, shaft gearbox, gearbox HARMONIC DRIVE ANTRIEBSTECHNIK series CPL-2A CPL-17A-120-2A-SP article number: 405764 series: CPL > Size: 17A
used
Micro drill bits, head drills, drill bits, 10 pcs UNION TOOL Type ST35 3.175 X 10 113-0317 Diameter: Ø 3.175 mm maximum drilling depth: 10.00 mm Overall length: 38 mm Shaft diameter: Ø 3.125 mm shaft length: 25 mm Other quantities on request ! New ! dimensions ( transport box ): 88 x 53 x 10 mm
used
Level switches, float switches, level switches PAGUS SSA215 SSA215/43-0/23-0 2 switching points: 23 /43 mm Immersion depth: 175 mm Flange diameter: Ø 33 / 49 mm Material tube: brass Material float: Plastic Dimensions ( float ): Ø 31 x 22 mm New ! Dimensions ( level switch ): 236 x 62 x 49 mm
used
Rotary table disc conveyor 1700-1600-Ø1500 with ejector 1330-100 RA2025 Technical data rotary table: Length table: 1700 mm width table: 1600 mm diameter turntable: 1500 mm Overall height: 100 mm Adjusted table height: 790 mm, can be moved down to 590 mm Electrical data SEW motor: 380-415 V, 0,37 kW Electrical data drum motor: 24V Technical data diverter: Length/ belt length: 1330 mm belt width: 100 mm overall height: 840 mm Electrical data: 380-415 V, 0,25 kW Included in delivery: Turntable with feet Side guide Ejector with stand Optional: Light barriers 24V power supply for drum motor control cabinet/control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Electric data: 0,25 kW, 0,37 kW, 24 V, 380-415 Drehtellerdurchmesser: 1500 Overall length in mm: 1700 Nominal / outside width in mm: 1600 Conveying length in mm: 1330 Belt width i ...
used
Rotary actuator for switch disconnectors, lockable EFEN 172 H 0002-1 ( 172H00021 ) 29.550.0010 bezel: 75 x 75 mm New ! Dimensions (packaging): 150 x 150 x 80 mm
used
Micrometer, 2 pcs Feinmesserfabrik Suhl 175 - 225 mm TGL 15046-1 pitch: 0,01 mm 1x range: 175 - 200 mm with protective box, dimensions: 350 x 202 x 35 mm 1x range: 200 - 225 mm with protective box, dimensions: 375 x 222 x 35 mm used, tested ! Dimensions ( packaging ): 390 x 240 x 80 mm
used
Micrometer, 2 pcs Feinmesserfabrik Suhl 175 - 225 mm TGL 15046-1 pitch: 0,01 mm 1x range: 175 - 200 mm with protective box, dimensions: 350 x 202 x 35 mm 1x range: 200 - 225 mm with protective box, dimensions: 375 x 222 x 35 mm used, tested ! Dimensions ( packaging ): 390 x 240 x 80 mm
used
Micrometer, 2 pcs Feinmesserfabrik Suhl 175 - 225 mm TGL 15046-1 pitch: 0,01 mm 1x range: 175 - 200 mm with protective box, dimensions: 350 x 202 x 35 mm 1x range: 200 - 225 mm with protective box, dimensions: 375 x 222 x 35 mm used, tested ! Dimensions ( packaging ): 390 x 240 x 80 mm
used
Used Urschel model 1700 stainless steel Comitrol Processor. Recommended for size reduction applications of free-flowing dry and semi-dry products. Processor is designed to install three different reduction heads - slicing head, cutting head or microcut head (ONLY microcut head is inlcuded). Microcut rotor head is driven by 22 kW, 2938 rpm, 50 Hz electric motor. Cutting chamber is sealed and deters escape of dust, vapor and liquid. Includes switchboard and control panel. Dimensions are approximately 1300 mm lenght x 900 mm wide x 1800 mm high, weight approx 500 kg.
used
For sale is a used, complete baling press system consisting of a chain belt conveyor for underfloor operation, with steel substructure and pit cover, a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 13,100 x 2,550 x 2,780 mm (l x w x h) Machine weight baler ap ...
used
UV lamp, UV lamp, contacts single AQUAFINE 17491 LM diameter glass body: Ø 15 mm length glass body: 774 mm Overall length ( with contacts ): 865 mm 2x Contact: Ø 2.5 mm x length 8 mm New ! dimensions ( UV-C lamp ): 865 x 26 x 20 mm Dimensions (packaging): 1000 x 50 x 40 mm
used
Bezel, bezel, setting column, fixed PAGUS inner diameter: Ø 170 mm tip height: 250 mm base: 228 x 80 mm back pressure plate: 182 x 62 mm used, tested ! Dimensions: 520 x 90 x 535 mm
used
Geared motor with brake SEW-Eurodrive RF27 DT90L4/BMG ( RF27DT90L4/BMG ) 1.5 kW 173 rpm 220 - 240 / 380 - 415 V 3AC 50 Hz 60 Hz - operation is possible ! IP54 Shaft diameter: Ø 25 mm wavelength: 50 mm groove width: 8 mm flange diameter Ø 160 / 110 mm bolt circle diameter: Ø 130 mm 4x Bore: Ø 8.5 mm used, tested ! dimensions: 560 x 200 x 265 mm
used
Magnetic interlock switch, safety interlock SCHMERSAL AZM 170-02zrka Fmax: 1 kN supply voltage: 24 V AC / DC safety contacts: 2 NC IP67 housing material: plastic without actuator ! New ! Dimensions: 90 x 85 x 30 mm
used
Kraftband with narrow V-belt OPTIBELT optibelt-KB 4-SPA 1700 Lw profile: SPA length: 1700 mm belt width: 57 mm belt height: 12,5 mm rib width: 12.30 mm rib count: 4 pitch: 15.00 mm Material: Neoprene New ! Dimensions ( Packaging ): 480 x 390 x 70 mm
used
Tension pulley, V-belt pulley, PAGUS diameter: Ø 105 / 135 / 170 / 167 / 111 mm profile: SPA groove width: 12,7 mm pivot point: Ø 20 mm Turning radius: 100 mm base plate: 9 mm Material thickness slotted hole: Diameter: Ø 12.5 mm, length: 130 mm used, tested ! Dimensions: 225 x 142 x 120 mm
used
Berkel table model bandsaw, type: BS 1750 RN, number: 50458, year of construction: 2008, 230/400 V, 3 Ph, 50 Hz, 4.7/2.7 A, 1.1 kW, 1400 rpm, dimensions table: 540 mm x 490 mm, total dimensions: 1100 mm x 760 mm x 1360 mm.
used
Magnetic interlock switch, safety interlock SCHMERSAL AZM 170-11zrka 1050309000 Fmax: 1 kN supply voltage: 24 V AC / DC safety contacts: 1 NC, 1 NO contact IP67 housing material: plastic without actuator ! New, with documents !; Dimensions ( switch ): 90 x 88 x 30 mm Dimensions (packaging): 110 x 105 x 35 mm
used
Reverse osmose filter system, diameter pipe: 170 mm, total dimensions: 3050 mm x 1200 mm x 1750 mm.
used
Simon mixing screw for dough, type: MXT 170 3030, serial number: 026, year of construction: 2000, 400 V, screw length: 4800 mm, approx. total dimensions: 6600 mm x 1900 mm x 2000 mm. With switch cabinet, dimensions: 2700 mm x 500 mm x 2170 mm.
used
Fiat forklift, model: E/3 17.5N, capacity: 1750 kg, weight: 2220 kg, fork dimensions: 1000 mm x 120 mm, total dimensions: 2900 mm x 1060 mm x 2200 mm. With CEAC charger.
used
Speidel Saftfass 170 Liter aus Edelstahl More then 300 machines new and second hand on our seema .de
used
4 AHT mobile freezers, type: RIO S 175, serial number: 331801 00000062 / 331801 00000069 / 331801 00000121 / 331801 00000143, 220-240 V, 50 Hz, 3.70 A, 370 W, netto volume: (4x) 396 dm³, dimensions: 1730 mm x 650 mm x 900 mm.
used
Description: Serial Number: 1114 220/380v Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,200 mm, weight approx.: 300 kg
used
RECON Standard size part number: 1230 2056 = 1507 7534 incl. counterweights ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us
used
RECON Standard size Part number 1213 5136 incl. counterweights ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us
new
We are offering original spark plugs for engines CAT/MWM TCG 2020 minimal order is for 10 pieces for 432 EUR/piece for Biogas engine spark plugs, and 488 EUR/piece for Naturalgas engine spark plugs.
used
Used marine engine DEUTZ MWM TD 602 V16 Power 875 hp Speed 1500 1/min We have more ship spare parts in stock
used
Key data: 750 , 400
(Deutz) MWM2016 V16 Natural Gas Generator Set Model: (Deutz) MWM2016 V16 Fuel: Natural Gas Year: 2007 Hours: 40,460 Capacity: 750 kW Hz: 50 Voltage: 400 V Scope of supply: Complete containerised genset including Engine, Marelli Generator, Frame, Control System, Gas Line, Radiator, Gas Filter and other accessories . Complete contarised genset. Very good condition. Turnkey ready to run now. A new crank was installed on 35,000 hrs. Available for Sale Now.
Biomass Plant, 5 MWel, 50 Hz, yoc 2002, in operation Boiler • Technical data: - Fuel tank capacity: approx. 1 .300 m 3 - Exhaust gas volume 29,000 Nm3/h - Average combustion temperature of 900°C (850 for 2 s.) - Thermal power of the furnace 13 MW - 2 add. Burners 5 MW each - Average calorific value Hu 12,500 kJ/kg - Throughput capacity 3,991 kg/h - Boiler working pressure 41 bar - Superheated steam temperature 420°C - designed amount of steam 14 t/h - Fuels: RDF, wood chips, straw, remains of chipboard, choiceed waste Hours of operation of the entire plant appr. 120,000 hours Steam turbine - TWIN steam turbine KKK, type: CFR 3 / AFA 6 GTA - Generator AvK, type DIG 140 k/4W - Gearbox Renk, type: ELCO W-shape can be inspected in operation this week, - SGS can be ordered for inspection.
used
Flour scale BÜHLER MWBL EE in different sizes from 24 to 170 Sumtronic II MWEE Spout containers All machines checked and in good condititon.
used
Many thanks for your interest on our new machines, please find follow our offer: manufacturer: Bauermeister Type: MWA 21 Mandelwaschanlage / almonds cleaning machine Year of manufacturing : 1981 Output 500kg/h Enginepower: 0,75kw dimensions: 3000x900x1500 electrical: 380 V We offer this machine in as-is where it is condition, without warranty, ex warehouse/location (Incoterms EXW), without packaging
used
Alfa-laval plate cooler typ. M6-MWFDR
used
Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed, and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 150 liters (mixing capacity depending on meat up to 100 kg) Worm, worm housing, and closing are completely stainless Delivery time: after advanced payment machine is generally refurbished and ready for delivery
used
used
Automaton mixer grinder KOLBE MW52 – 120 Specifications: Type: MW52 – 120 400 volts / 50 Hz / 15.2 + 2.8 A / 7.5 + 1.1 kW Year of construction 2019 Perforated discs diameter 130 mm Cutting system: Enterprise E 52 Hopper capacity: 120 L Conveying capacity: approx. 2000 Kg/h with mixing device Total dimensions: W/H/D 92.3 x 135 x 135 cm Weight: 560 kg Equipment: One speed for working screw and mixer Stand, funnel, wolf housing, screw and mixing blades made of stainless steel Locking nut stainless Combi hook wrench Housing spout protective cover Push button switch Connection cable with CEE phase plug Machine mobile with 2 swivel castors and 2 fixed castors Original price meat grinder in this version: approx. EUR 30.000,- Function checked, condition & accessories see original pictures.
used
Automaton mixer grinder KOLBE MW52 – 120 Specifications: Type: MW52 – 120 400 volts / 50 Hz / 15.2 + 2.8 A / 7.5 + 1.1 kW Year of construction 2018 Perforated discs diameter 130 mm Cutting system: Enterprise E 52 Hopper capacity: 120 L Conveying capacity: approx. 2000 Kg/h with mixing device Total dimensions: W/H/D 92.3 x 135 x 135 cm Weight: 560 kg Equipment: One speed for working screw and mixer Stand, funnel, wolf housing, screw and mixing blades made of stainless steel Locking nut stainless Combi hook wrench Housing spout protective cover Push button switch Connection cable with CEE phase plug Machine mobile with 2 swivel castors and 2 fixed castors Original price meat grinder in this version: approx. EUR 30.000,- Function checked, condition & accessories see original pictures.
used
Automatic mixing grinder, meat grinder, mixed meat grinder Capacity approx. 2000kg/h Hopper volume: 120l incl. mixing device incl. perforated disc with 4-blade knife
used
- CNC : Fanuc 32 - Number of axes : 4 - Number of spindles : 2 - Number of turrets : 2 - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 45 - 4.500 [rpm] - Max. chuck diameter : 165 [mm] - Number of Turret positions : 2 X 8 - X/Z stroke : 130 / 145 [mm] - Machine floor space : 3.800 x 1.875 [mm] - Machine height : 2.420 [mm] - Machine weight : 4.400 [kg] - Interface : USB / PCMCIA - Tool monitoring - Coolant tank - Chip conveyor - Workpiece loading robot : 1 - Max. workpiece weight : 2x 3,0 [kg] - Max. workpiece diameter : 120 [mm]
used
Automatic double wheel reel suitable for pipes from 10-32 mm OD Manufacturer: NEXTROM /Maillefer Type: MWB 1300G Year of construction: 1998 Condition: "as it is", ready for operation.
used
Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending of meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment