17 mw used for sale

Gear motor, electric motor, electric gear motor -Speed: 6 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 675/260/H245 mm -Weight: 47 kg

Hydraulic vise, machine vise, hydraulic vise, high-pressure clamp, hydraulic vise -hydraulic tension defective -sold as a source of spare parts -Jaw width: 160 mm -Jaw height: 53 mm -Span: max. 170 mm -Support height: 80 mm -Weight: 62 kg

Gear motor, electric motor, electric gear motor -Speed: 315 rpm -Power: 0.075 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 380/200/H210 mm -Weight: 19 kg

ABB Robotics IRB 6600 175/2.8 Control: IRC5 M2004 Number of axles: 6 Max. load capacity: 175 kg Max. working range: 2800 mm Scope of delivery : Robot, Controller, Cable, Teachpanel, Circuit diagrams Floppy disk drive for data backup 2 weeks start-up guarantee. No further warranty. In addition, spare parts are always available from stock. Robot is fully functional and can be visited. The indicated retail price is exclusive of the statutory VAT of 19%.

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 175 mm -Width: 20 mm -Price: per piece -Number: 1x available -Weight: 1.1 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 28 mm -Outer: Ø 175 mm -Width: 6 mm -Price: per piece -Number: 2x available -Weight: 0.3 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 175 mm -Width: 20 mm -Price: per piece -Number: 1x available -Minimum purchase: complete -Weight: 1.0 kg

Manufacturer: INOTEC Type: 175 for engines 75 D , 90 D Lug ring long continuous groove for Mikrocutter INOTEC 175 - NEW Product Code : V500663-1 / 175-0020019 Position 21 of the drawing Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone 0048/33 812 58 60 fax. 0048/33 812 58 36

x-travel: 800 mm y-travel: 630 mm z-travel: 800 mm Control: Siemens type: 840 D size of pallet: 500x630 mm numbers of pallets: 8 : 360 ° turning speeds: 6000 U/min Table load: 800 kg spindle taper ISO: 50 Tool changer: Pos. chip conveyor: Feed: 1-36000 mm/min Cooling through the spindle: 50 bar total power requirement: kW weight of the machine ca.: 19,5 t dimensions of the machine ca.: 8x7x4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder -Inside: Ø 32 mm -Outside: Ø 175 mm -Width: 32mm -Quantity: 1 piece available -Weight: 1.4kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 175 mm -Width: 25 mm -Price: per piece -Number: 1x available -Weight: 1.2 kg

Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2005/1500/80 mm -Table height: 800 mm -Plate: solid -Holes: 50 x 50 mm -Cast plate -Vice -Dimensions: 2100/1700/H1030 mm -Weight: approx. 2000 kg

Gear motor electric motor -Speed: 56 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Brake: 220 V -Weight: 27 kg

geared motor, electric motor -Speed: 120 rpm -Power: 3.0 kW -Design: B3 angle -Shaft diameter: Ø 35 mm -Protection class: IP 54 -Quantity: 1 piece available -Dimensions: 730/260/H240 mm -Weight: 63 kg

Key data: 140 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA INTAREMA® 1714 TVEplus®, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 1200kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!

gear motor, electric motor, electric gear motor -Speed: 29.5 rpm -Power: 0.075 kW -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 380/200/H210 mm -Weight: 19 kg

DC motor, servo motor, gear motor, electric motor, direct current, gear motor -Speed: 40 rpm -Power: 0.19 kW -Construction: angle -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Number: 2x motors available -Price: per piece -Dimensions: 310/150/H160 mm -Weight: 10 kg

Anton Paar DM 4500 Density Measuring Device Option: RXA 170 refractometer Density determination measuring range 0.6-2g/cm3 Temperature range 5-70 Celsius Sample quantity 1 ml Price without RXA 170

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 78 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Brake -Dimensions: 540/220/H230 mm -Weight: 22 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -Number: 1x prism -Price: complete -Dimensions: 200/171/H92 mm -Weight: 12 kg

LWB Steinl Injection Machine Type VREFE 1600/1000/170 Heating platen size 500 X 510 X 63 mm Sliding platens Top and bottom ejectors Clamping force 1600kN Opening force clamp 100kN Clamping stroke 395mm Injection volume E 1000 ccm Max. Injection Pressure E 2200 bar Injection volume EF 170 ccm Max. Injection Pressure EF 1800 bar Hours: 700 since new Year 2009 Weight 6000kg

Chuck flange, flange mount, lathe chuck flange, driver flange -Chuck flange: for three-jaw chuck, four-jaw chuck, face plate -External: O 270 x 110 mm -Inside: O 240 x 81 mm -Mount: Camlock short taper 8 (139 mm) -Bolt circle: O 171 mm -Number: 1x disks available -Price per piece -Weight: 16.6 kg

Machine vice, stable vice, drill press vice -Vice: rotatable -Jaw width: 200 x 55 mm -Clamping depth: max. 170 mm -Dimensions: 600/270/H210mm -Weight: 81 kg

Plug, plug connection -Plug pre-assembled with cable -Type: 17113 -Number: 1,100x plugs available -Price: per piece -Please inquire about quantity discounts -Weight: 0.2 kg

Sensor actuator distributor, distributor strip, interface, sensor actuator distributor, sensor actuator -Manufacturer: Weidmuller, sensor-actuator-distributor ovp -Type: SAI-8-M 5P M12 170125 -Dimensions box: 175/65/H50 mm -Weight: 0.3 kg

Bezel traveling, moving bezel, bezel, steady rest, lynette -Manufacturer: Meuser, bezel from lathe type MV SKV/2-1 -Bezel: driving -Max. Passage: Ø 170 mm -Center height: 230 mm -technical drawing: with the photos -Dimensions: 520/405/H510 mm -Weight: 33kg

engine diesel engine Cummins F3.8 - Stage 5 power approx. 114 kW / 154 HP shafts with 9/9 discs with 6 knives per disc (reconditioned) track system with track protection pads hopper with vibro chute Permanent-Over Belt Magnet remote control weight approx. 11 t

Qty. 3 Second-hand winders Mfc.: Maxson Built: 1997 Roll width: max. 1,700 mm, min. 450 mm Maximum roll diameter: 1,650 mm The width of the core is: 70, 76, 120, 152, 300 mm

Proximity switch, proximity sensor -Manufacturer: Festo, proximity switch, unused, original packaging -Type: SME-8-K5-LED-24 175 404 -Quantity: 1 available -Price: per piece -Packaging dimensions: 150/60/H30 mm -Weight: 0.1 kg/piece

width of the strips: 200 mm band length: 1600 mm tube diameter: 38 - 170 mm connected load frequency: 400 V total power requirement: 3,0 kW weight of the machine ca.: 0,25 t dimensions of the machine ca.: 1,4 x 0,8 x 1,35 m Pipe grinding machine with 11 sanding rollers: 38 - 42 - 48 - 52 - 60 - 74 - 90 - 102 - 116 - 138 - 170mm Pipe clamping area 170mm Documentation (English) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heavy-duty castors, heavy-duty wheel, tire, forklift drive wheel -Manufacturer: Gumasol heavy duty roller heavy duty wheel -Wheel size: 250/80-170 -Number: 5x wheel available -Price per piece -Weight: 5.1 kg/pc.

Condition: New (traces of storage available) Part Number: 8256016 Serial Number: 19293766 Type: 1724 Suitable for: Mitsubishi S12R

Ami pallet transfer transfer roller conveyor chains 90° 1750-1397-1262-1100 RA2296 Make: AMI Running direction: both directions Roller width (RB): 1080 mm / 1100 mm profile spacing Nominal/outer width (NB): 1262 mm Length: 1397 mm Diameter of rollers: 89 mm Frame height: 160 mm Roller spacing: 175 mm Chain transfer motor: SEW motor 300-500 V, 0.37 kW Lifter motor: SEW motor 300-500 V, 0.5 kW Roller conveyor motor: SEW motor 300-500 V, 0.37 kW Conveyor speed: 0.15 m/s Chain spacing: 450 mm total width: 950 mm Transfer length chained: 1750 mm Chain type: Double chain, mounted on plain bearings Scope of delivery: incl. supports, currently 500 mm Optionally available: Frequency inverter for infinitely variable speed control Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) angle: 90° Construction year: 2003 nominal volt ...

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Manufacturer: Haffner, milling motor type M 30 -Power: 300 W 17000 rpm -Voltage: 200 V 300 Hz -Dimensions: 240/70/90 mm -Weight: 2.5 kg

Heavy duty roller, support roller, idler roller, jockey wheel, cast wheel -Support wheel: Cast wheel with spring, solid design -Dimensions: see photos -Total dimensions: 295/170/H880 mm -Weight: 45 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 8 grooves -V-belt width: 17 mm -Receptacle: Ø 97/90 x 60 mm for taper clamping bush (Ø can be changed) -Dimensions: Ø 225 x 157 mm -Weight: 18kg

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m Machine completely overhauled with 12 months warranty Mechanically and optically like new Photo from Kellenberger brochure Fanuc 21i control -Grinding head UR 1-2-3 external/internal/plan -Axis automatic 1° Hirth serration -Active longitudinal positioning KEL-POS Movomatic -Semi-automatic balancing device KEL-BALANCE -Grinding wheel equipment left 400mm diameter -Grinding wheel equipment right 300mm diameter -Internal grinding unit with belt drive -Tailstock with micro-adjustment -fine adjustment upper table -Paper belt filter SBP4 240l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Motor potentiometer, regulator, motor controller, rotary potentiometer -Manufacturer: Kessler, motor potentiometer type P3-173 KL -Distortion Plan: PFN-64 -Rotary potentiometer: Rosenthal P 500 19 Ohm / Rosenthal P 100 470 Ohm -Individual components: see photos -Dimensions: 550/200/H270 mm -Weight: 9.1 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 1700 mm -Piston rod: Ø 45 mm -Dimensions: Ø 75 x 2100 mm -Weight: 40 kg

Chiller Make: SYSTEMAIR Type: SYSCROLL 170 AIR EVO PH Power: 170 kW – cooling and heating Electrical. Power: 77 kW/150A Refrigerant: R410A Weight: 1,385 kg Year of Make: 2014 4 pcs compressor Make: Copeland Scroll Type: ZP182KCE-TFD-455 Volume: 35.1 m³/h Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, guide cylinder type DFM-20-40-PA-GF 170843 -Piston: Ø 20 mm -Stroke: 40mm -Sliding guide -Quantity: 3x cylinders available -Price per piece -Dimension: 120/80/H60 mm -Weight: 1.1 kg/pc.

Stop, depth stop, length stop for press brake, bending machine, guillotine shear... -Stop: for press brake, bending machine, guillotine shear ... -Reference: M16 x 2 -Dimensions: see photos -Quantity: 2 available -Price: complete -Dimensions: 345/175/H115 mm -Weight: 4.2 kg/pc.

workbench, work table, assembly bench, assembly table, work table -Workbench: tubular frame -Width: 1750mm -Depth: 800 mm -Height: 750mm -Number: 2x workbench available -Price: po piece -Weight: 36 kg/piece

Variator pulley, Vario adjustment pulley, Vario pulley, PIV gearbox, Vario gearbox, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable -Manufacturer: Berges, Vario pulley -Type: 280 -Outer pulley diameter: 295 mm -Hole: Ø38 x 160 mm -Dimensions: Ø295 x 170 mm -Weight: 7.8 kg

Gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: Eberhard Bauer, gear motor -Type: D 146/176 -Speed: 82 rpm -Power: 3 kW / 1410 rpm -Shaft: Ø 50 x 110 mm -Dimensions: 750/320/H325mm -Weight: 93 kg

Bezel, moving bezel, bezel, steady rest, lynette -Bezel: moving -Tip height: approx. 170 mm -max. passage: Ø 75 mm -Dimensions: see photos / technical drawing -Dimensions: 365/90/H375 mm -Weight: 10.9 kg.

Gearbox, spur gear, angle gear, worm gear -Gearbox: Angle gearbox, unfortunately without type designation -Translation: i= 1:1 -Shafts: Ø 16 x 40 mm -Dimensions: 175/160/H80 mm -Weight: 4.6 kg

Transnorm angled-belt conveyor 30° 1750-1000-800 RA2305 Exhibit Make: Transnorm Year of manufacture: 2022 Inlet angle: 30 Length center: 1670 mm Belt width (RB): 800 mm Frame height: 300 mm Nominal/external width (NB): 1000 mm, 1200 mm with motor Conveying speed: with Frequency converter for infinitely variable speed control between 0.25-0.75 mm/s, V230/400 kW 2,2 Overall height side wall: 200 mm Scope of delivery: with motor and side guides Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: angle: 30° scope of delivery: including side guides without supports, inklusive Frequenzumrichter condition: Ausstellungsstück Antrieb: SEW Getriebemotor Electric data: 380-400 Bauhöhe in mm (BH): 300 KW: 2,2 Belt width in mm (GuB): 800 Optional erhältlich: Füße Construction year: 2022 Conveying length in mm (NL): 1670 Frame width in m ...

1700 : EL 400 30 pcs. DM 50 Steel axle M8 i 1100 : EL 470 100 pcs. DM 50 Steel axle 10mm Price per piece / as good as new

Kannegiesser belt conveyor Belt conveyor GF 1750-880-800 RA1306 Technical data: Conveying length (NL): 1750 mm Framework width (NB): ca 880 mm belt width (GuB): 800 mm Height/band run (BH): 420 mm +/- 100 mm Number of support feet: 2 pieces Load (kg/m): 75 kg Conveying speed: kontact us Electrical data: 400 V / 50 Hz / 0,75 kW Year of construction: 01/2018 Not the right one for you? On our website you will find more articles or simply contact us. All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 1750 Nominal / outside width in mm: 880 Belt width in mm: 800 Driven: YES KW: 0,75/S1 Conveyor speed m / s: freely adjustable scope of delivery: inklusive Frequenzumrichter, including supports without side guides For individual, professional advice, simply get in touch with us ...