16a used for sale

; Gross weight [kg]: 4200; Engine: Iveco CR13TE7W.S550; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Battery charger and coolant heater, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 800

Winding machine croissant winding machine Model: HWM 50 R for all poles such as Kornspitz, pretzel and pretzel sticks etc. Universal - Winding machine with inlet belt with return guide / 1 man operation for all doughs for wrapping Cone winding machine with 500 mm bandwidth Dough insert approx. 20 to 400 g Edelstahaus guided tour DGUV V3 tested Machine mobile Connection 400V, 16A-CEE plug NEW Machine with 12 months warranty

; Gross weight [kg]: 2350; Engine: Iveco NEF67TM4.S500; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224

Planetary agitator Model: Rego PM 40 E Stirring machine Power adjustment infinitely variable Intervention - Protective grille LED control with timer 1 stainless steel boiler 40 liters 1 broom, 1 flat stirrer electric boiler stroke Stand-alone machine with tank car DGUV V3 tested Connection 400V, 2,3 kW,16A-CEE plug Dimensions: 970 x 680 x 1700 mm, DxWxH Weight 400 kg. Used machine overhauled with 6 months warranty

; Gross weight [kg]: 1315; Engine: Iveco NEF45TM2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185

Planetary Agitator Stirring Machine Model: Rego PM 60 E Power adjustment infinitely variable Intervention - Protective grille LED control with timer 1 stainless steel boiler 60 liters 1 broom, 1 flat stirrer electric boiler stroke Stand-alone machine DGUV V3 tested Connection 400V, 4 kW,16A-CEE plug Dimensions: 970 x 680 x 1700 mm, DxWxH Weight 500 kg. Used machine overhauled

Traysealer from the manufacturer RETON FRESH PACKING , model RT -702. Equipment with gas flush option. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Measures of the last of the tray to be sealed 145 mm x 230 mm x 70mm x 2 units. Acta for film reels of width 350mm. Overall machine size 1200 mm x 740 mm x 1760 mm high. Machine weight 450kg. The RETON tray seamer has been designed to package food products with a modified atmosphere, in industrial environments. Low investment, multiplicity of uses and flexibility explain the popularity of the RT-702 mod. With this you can close trays of different materials and sizes at high speed. Like all RETON packaging machines, it offers speed, reliability, quality and excellent performance, as well as easy maintenance. The mold can be changed in a few minutes and the machine is very eas ...

Winding Machine, Cone Winding Machine Universe Kasper Model: HWM 50/70 for all sticks such as Kornspitz, pretzel and pretzel sticks, etc. Universal - Combi Winding Machine for all doughs for wrapping and long rolls Upper feed roller coated Changing basket on top reinforced storage Wrapping weight range: 30 to 450 grams depending on TA Croissant winding machine down with long roller for skeins and pretzels max 700 mm long DGUV V3 tested Machinery on the move Stainless steel Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty only on spare parts Option: Feeder Another 400 bakery machines in stock!

Planetary agitator Model: V-Mixer 120 L Professional machine with robust technology! for best results! LED display 10 power levels and timer Intervention protection / safety grille with protective circuit Stirring machine with tool: 1 whisk, 1 dough hook, 1 flat stirrer 1 120 litre stainless steel boiler Boiler stroke electric DGUV V3 tested Connection 400V, 6 kW, 16A-CEE plug Dimensions: 853 x 1102 x 1958 mm, WxDxH New machine with 24 months warranty Option: - Programming of 20 recipes with 7 steps each - Time programming - Tank wagons - Air pressure connection for more volume

Semi-automatic dough dividing and warping machine Bread roll press Model: 4/30 sophisticated technology ... the original! Knives with easy cleaning position! with 3 active plates replaceable partial disc / part head manual sharing mechanical rounding Dough ring coated with easy klick Subrange 40 to 120 grams/piece Division 30 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH NEW Machine with 2 years warranty

Winding Machine, Cone Winding Machine Universe Kasper Model: HWM 50/70 for all sticks such as Kornspitz, pretzel and pretzel sticks, etc. Universal - Combi Winding Machine for all doughs for wrapping and long rolls Upper feed roller coated Changing basket on top reinforced storage Wrapping weight range: 30 to 450 grams depending on TA Croissant winding machine down with long roller for skeins and pretzels max 700 mm long DGUV V3 tested Machinery on the move Stainless steel Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty only on spare parts Option: Feeder More TOP bakery machines in stock!

Semi-automatic dough dividing and warping machine, Bread roll press Model: 4-30 NEW sophisticated technology ... the original! Knives with easy cleaning position! with 3 active plates Dough ring coated with easy klick Subrange 40 to 120 grams/piece Division 30 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH NEW Machine with 2 years warranty

- Thickness of 1.5-Al bent steel sheet. 2.5 mm, - Bending length 8m - Hydraulic drive - Roller shears for cutting off the sheet metal - CNC-700 Windows touch control - Bending max 140 ° - Bumper pulls away 1050 mm - Drive 3x400V, 4kw (16A) - Weight 7500 kg

Kalix Dupuy horizontal intermittent cartoner, Elec: 16A , A (mm): 20 to 70 , B (mm): 15 to 60, C (mm): 70 to 200

Dough dividing and warping machine, Bread roll press Semi-automatic Model: 4-14 NEW sophisticated technology ... the original! Knives with easy cleaning position! with 3 active plates Dough ring coated with easy klick Subrange 130 to 250 grams/piece Division 14 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH NEW Machine with 2 years warranty

DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: Laminator Gemini C 400 A with vibrator - Especially suitable for small to medium runs - Sheets are automatically fed via pallet feeders, laminated and separated - Anti-curl mechanism for perfect flatness Specifications: - Feeder: Flat pile feeder with 230mm loading capacity - Format: min. 320x250mm; max. 380x580mm - Paper thickness: 115-350g/sqm - Film thickness: 20-45 μm - Film types: OPP, Nylon - Inner diameter of roller: 70-80mm - Outer diameter of the roller: max. 400mm - Speed: 0-15m/min; max. 1800 sheets/h for format B3 - Warm-up time: approx. 10 min - Weight: 365kg - Power connection: 230 V, 2.3kW, 16A - Approx. space: 74 x 280 cm On request, we can organize the following p ...

Dough dividing and warping machine, Bread roll press Model: 4-09 NEW sophisticated technology ... the original! Knives with easy cleaning position! with 3 active plates Dough ring coated Subrange 100 to 440 grams/piece Division 9 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH NEW Machine with 2 years warranty

Compact pretzel long roller with croissant winder and feed belt Universe Kasper Model: LWT 3/30 -EB 2 for all rods and pretzel sticks, etc. Universal - Combi Winding Machine for all doughs for wrapping and long rolls Longitudinal width 600 mm for pretzel strands Total efficacy over 2 levels Dough filler from 25 - 180 grams Stainless steel version with step flap with EB2 feeder with centering device and pre-rolling for bread roll lines with transverse discharge DGUV V3 tested with sling table hold flap Connection 400V, 16A-CEE plug Approx. dimensions: 1600 x 700 x 1800 mm, WxDxH Used machine overhauled with 6 months warranty More bakery machines in stock!

Bread roll press Semi-automatic Dough dividing and warping machine Model: 3-30 NEW sophisticated technology ... the original! Knives with easy cleaning position! with 3 active plates Dough ring coated with easy klick Subrange 30 to 100 grams/piece Division 30 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH NEW Machine with 2 years warranty

Balers, Bramidan B20 – second-hand - : Price from location: 7.750.-€ (net) Manufacturer: Bramidan Type: Vertical Raw Material Presses B20 Year of construction: 2018 Bale weight Cardboard (kg) 200-250 Plastic film (kg) 250-300 Press force 20 t Bale size WxDxH (mm) 1200 x 800 x 800 Filling opening WxH (mm) 1200 x 480 Power supply 3x400V 50Hz 16A Engine (kW) 4.0 Cycle duration avg. (s) 36 / 21 Dimensions WxDxH (mm) 1775 x 1030 x 2790 Transport height: 2.58m Weight (kg) 1250 Stroke (mm) 750 Number of lacings 4 Type of Lacing Tape Finished bale light Yes Bale ejection automatic The classic among raw material presses The B20 is versatile and used everywhere. "Dry & Soft" must be the recyclable materials. Particularly suitable for raw materials such as cardboard, paper, cardboard (PPK) and films. Stackable bales, up to 900 kg per pallet The bales are stacked 2 or 3 times on one; enormous ...

; Gross weight [kg]: 8600; Engine: Perkins 4006-23TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A

Dough dividing and warping machine Bread roll press Fortuna Gr. 3 Semi-automatic 30-piece Part header NEW revised Stainless steel knives NEW Dough insert up to 2550g, depending on TA Piece from 35 to 70g Round/85g Square Capacity max. 7000 pieces/h with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm, WxDxH Used machine overhauled with 6 months warranty

2 pieces Ultrasonic Wheel Washer, Performtec / Tiresonic, BIGWHEEL 4 Wheel Washer – used- : Price per piece ex site: 12.500.-€ (net)! Manufacturer: Performtec / Tiresonic BIGWHEEL 4 Wheel Washer Year of manufacture/washes performed since purchase: - 2019/18.795 - 2020/18.003 42031 D TIRE RWA 302 TWIN 001000 Wheel washer ultrasonic car, type RWA 302 TWIN Serial number : 431013 L + 231014 R incl. accessories: -Workbench - Main switch IP 67 + self-adjusting bearing - 2 x Truck Clamping Cone, 2 x Car Clamping Cone - 2 x 14 inch adapters - Power Clean Agent, Multiboss bath cleaner - Instruction manual and quick operating instructions - Information sheet on washing-up liquid and void of warranty in case of Use of third-party detergents or third-party additives or sprays Original price: approx. 22.000.-€ (net) / piece Condi ...

; Gross weight [kg]: 3800; Engine: Iveco CR13TE2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 550

Bread roll press Fortuna Gr. 3 Semi-automatic 30-piece Part header NEW revised Stainless steel knives NEW Dough insert up to 2550g, depending on TA Piece from 35 to 70g Round/85g Square Capacity max. 7000 pieces/h with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm, WxDxH Used machine overhauled with 6 months warranty

; Gross weight [kg]: 4000; Engine: Perkins 2206C-E13TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 450

; Gross weight [kg]: 6200; Engine: Doosan DP222CC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1500

Bread roll press size 3 Fortuna semi-automatic 30-piece Part header NEW revised Stainless steel knives NEW Dough insert up to 2550g, depending on TA Piece from 35 to 70g Round/85g Square Capacity max. 7000 pieces/h with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm, WxDxH Used machine overhauled with 6 months warranty

Winding Machine, Cone Winding Machine Universe Kasper Model: HWM 50/70 for all sticks such as Kornspitz, pretzel and pretzel sticks, etc. Universal Combi Winding Machine with Infeed Conveyor for all doughs for wrapping and long rolls Wrapping weight range: 30 to 450 grams depending on TA Croissant winding machine bottom with long roller for belly pretzel for skeins and pretzels max 700 mm long foldable with EB feeder suitable for bread roll line with discharge conveyor DGUV V3 tested Machinery on the move Stainless steel Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty Option: Wrapping from 350 to 1000 grams with train Only with us you will find the largest selection of winding machines!

Roll-out machine Kombi WLS Jewel Model: 16 CW for all doughs for rolling out and touring Infinitely variable roller adjustment Pull-out table left and right Active pressure plate with manual adjustment with long roller / long knitter below with tow for wrapped products Dough roll-out machine can be driven with locking device With flour container Connection 400V, 16A-CEE plug Used machine cleaned 6 months warranty Visit our large Bakery Machinery Center.

Key data: 2 KW

Information: - Current type: 3 / 400 (ph/v) - Nominal power: 2 kW - Nominal power (three-phase current): 7 kW - Power: 2.5 kW - Power (three-phase current): max. 7.5 kW - Drive type: Gasoline - Displacement: 440 cm³ - Engine power: 11.8 / 16.1 (kW/hp) - Fuel consumption: 4.5 l/h - Fuel tank capacity: 25 l - Runtime at 50% output: 7 h - Runtime at 100% output: 5.5 h - Weight incl. packaging: 98.8 kg - Weight without accessories: 89.7 kg - Dimensions L × W × H: 743 x 713 x 670 mm - Operating status indicator - DC output (12 V) - Protection class IP 23 - Oil deficiency and overload protection - Fuel gauge - Socket 1-phase type T21 - Socket 3-phase CEE (16A) - Automatic Voltage Regulator (AVR)

Model: Quail Piccolo 1-4 Electric floor stove for 4 sheets 600x800mm Stove dimensions 600x800mm / 165 mm high DMS 3 controller with Master 100 EM Hood Design fairing black Base with sheet metal shelf for sheets 600x400 Connection 400V, 17.6 kW, 4 x 16A-CEE plug Dimensions: 1170 x 1050/1500 x 2170 mm, WxDxH Oven can be driven with solid rollers Used stove

Werkstückrückführung Fabrikat: BARGSTEDT Typ: TFU 02/L/33/67 Baujahr: 1991 Bestehend aus: - Luftkissentisch - 2 angetriebene Gurtbänder - Auslaufröllchentisch Strom: 380V/50Hz/16A Steuerspannung: 220V

Floor oven electric oven Matadore Store Type: 6.8. M manual control Bottom heat and top heat can be individually controlled for 4 x sheets 600 x 800 mm or 8 x sheets 600 x 400 mm Stove height 17 cm all herds with steam Shelf at the bottom Base frame mobile with locking device Connection 400V, 4 x 8 kW, 4 x 16A-CEE plug Water connection 3/4 inch, water drain DN 40 Dimensions: 930x1332x1540 mm, WxDxH Used oven Visit our large Bakery Machinery Center!

Bread dough dividing machine Model GBT Olympia Standard - Capacity approx. 500 to 2500 pcs/h - Funnel approx. 200 kg dough - Stainless steel version - 3 chamber weighers mobile - with run-off belt - Connection 400V, 4 kW, 16A-CEE plug - Weight 1,2 to Used machine not cleaned Visit our large Bakery Machinery Center!

warehouse no.: 503244 manufacturer: KRAUSS MAFFEI type: KM 200-1000 CX controller: MC5 year of construction: 2010 operation hours: 47472 h clamping force: 2000 kN distance between tie bars h x v : 560 x 560 mm size of mould plates h x v: 915 x 915 mm min. mould height: 350 mm max. open daylight: 1050 mm opening stroke: 700 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar measures of machine lxbxh: 5.5m x 2m x 2.3m total weight: 11500KG equipment included: screen text german CEE-socket 16A Machine without Handling machine without material hopper Anti vibration mounts interface EUROMAP 67 wear-resistant injection unit

Turntable for seeds Fortuna DT Stainless steel Shelf below for seed plates Wired mobile Connection 400V, 1 kW, 16A-CEE plug Used machine cleaned 6 months warranty Visit our large Bakery Machinery Center!

Manufacturer: BATTENFELD Type: HM 1300-9200H-7700H-BM Control: UNILOG B4 Clamping force: 13000 kN Year of construction: 2005 Technical data closing page: Drive type: fully hydraulic Closing type: Full hydraulics Type: four-spar Clamping force: 13000 kN Tie bar size h: 1600 mm Tie bar size v: 1250 mm Panel size h: 2220 mm Panel size v: 1880 mm Installation height min: 1000 mm Installation height max: 1800 mm plate spacing max.: 3850 mm Opening distance: 2850 mm Ejector stroke: 350 mm Ejector force: 165 kN Centering movable plate D: 315 mm Centering fixed plate D: 315 mm Technical data spray side: Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1630 bar Screw length: 22 l/d Plasticizing current: 144 g/s PS The technical data of the 2nd injection unit are as follows: Injection unit II 7700 Screw diameter 100 mm, Specific spray pressure 1960 ...

Cheese dividing machine DOMA KT3 EMF Specifications: 400 V / 50 Hz / 1.1 kW / 2.6 A 16A CEE Plug Year of construction: GÜ 2009 including knife insert for 4 parts Machine dimensions: H106 x W60,5 x D60,5 cm Diameter cheese loaf max. 40 cm Height cheese loaf max. 20 cm Function tested, machine immediately ready for use Stock machine, immediately available! Condition see original pictures! If you have any questions, email or call.

Warehouse No.: 503240 manufacturer: ENGEL type: Victory 650-120 Tech EC200 A02 Year of Construction: 2008 Operation hours: 60000 h clamping force: 1200 kN Size of mould plates H x V: 740 x 680 mm Min. mould height: 300 mm Open Daylight: 800 mm Opening stroke: 500 mm Screw diameter: 45 mm SWEPT Volume: 318 cc Injection pressure: 1232 bar Equipment included: screen text english CEE-socket 16A Core Pulling Hydraulically 2x Air Valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface EUROMAP 67 Mould Heating 8x measures of machine LXWXH: 4.86m x 1.5m x 2.1m total weight: 7600KG

Key data: 3500 , 60

warehouse no.: 503071 manufacturer: DEMAG type: Concept 350-710-1450 controller: NC4 year of construction: 2003 operation hours: 62370 h clamping force: 3500 kN distance between tie-bars h x v: 710 x 630 mm size of mould plates h x v: 1040 x 950 mm min. mould height: 330 mm max. mould height: 830 mm max. open daylight: 1385 mm opening stroke: 675 mm screw diameter: 60 mm swept volume: 763 ccm injection pressure: 1905 bar equipment included: 16x control for hotrunner screen text german CEE-socket 16A core pulling hydraulically 1x air valve moveable WAP machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 interface EUROMAP 63 Schuko-socket 10A measures of machine l x w x h: 6.5m x 2m x 2.3m total weight: 15300KG

warehouse no.: 503174 manufacturer: DEMAG type: ERGOtech 1000-420-310 controller: NC 4 year of construction: 2002 clamping force: 1000 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 600 x 600 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 35 mm swept volume: 168 ccm injection pressure: 2020 bar equipment included screen text german CEE-socket 16A complact flash drive core pulling hydraulically 1x air valve 1x machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A Schuko-socket 10A measures of machine l x w x h: 4.2m x 1.4m x 1.8m total weight: 3700KG technical data robot-system handling type: Linear manufacture: Wittmann controller: W7 ...

used Kemppi TIG welding machine KEMPPI MasterTig MLS 4000 TIG welding machine Power 400V 16A Power max 400A With pulse function Control panel MTX Water cooling Mastercool 10 Carriages With burner Kemppi TTC 250W (ampere adjustment on the burner) ,Ground cable, without pressure reducer Good condition Fully functional. Viewing and pick-up possible Shipping Germany (without islands) 110,00 Euro net The goods can be viewed at the location 59379 Selm by appointment. F0wy2lgoa You will receive an invoice with VAT. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.

Tape De-Schwarter / Band- Abschwartmaschine Manufacturer: MAJA Type: SKINNY II Description: Belt operation for automatic de-skinning of all flat sections Manual de-skinning of round cuts - such as shoulder, ham and pork knuckle Belt width 380 mm Cutting width: 434 mm 4 new spare blades included Cutting thickness infinitely adjustable Machine can be operated with conveyor belt or manually mobile on 2 pulleys (with brake) & 2 fixed castors Stock machine, immediately available! Specifications: 400V / 50 Hz / 0.55 kW / 1.8 A / 16A CEE plug Total dimensions: H120 x W85 D140 cm Year of construction: 2019 Weight: approx. 190 kg Function tested / Machine ready for immediate use! Condition and accessories see original pictures!

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm 2 saw blade speeds: 40 / 80 rpm. Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug. free domicile within Germany

Type: Industrial Winder Fritsch CRH120/400 Cone Winder with inlet and outlet belt made of silicone fabric new winding tapes Band width: 400mm Version in stainless steel Machine is mobile Connection: 400V, 1kW, 16A CEE plug Condition: completely repaired and in good condition

Mincer KOLBE SW 100 Specifications: Type: SW 100 380 volts / 50 Hz / 6.7 A / 2.9 kW 16A CEE Plug Total dimensions: H57 x W55 x D90 cm Enterprise Cutting System Perforated discs diameter 98 mm Filling tray volume: approx. 40 L Stainless steel screw housing Screw & locking nut stainless Stock machine, immediately available! Function tested, machine immediately ready for use Condition & accessories see original pictures. Sale as defective because the screw has broken out at one point and the hand guard on the hopper is missing. Purchase price incl. current VAT. A proper invoice will be issued.

working length: 2451 mm Working width: 2170 mm Working height: 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ---------------------------------------------- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW  ...

Manufacturer: H&M HM-ZN 8000-R automatic miter and beam saw Type: ZN-8000 R Motor: 6 kW Saw blade: ø600 - ø700 mm Axle: ø30 Saw height: 250mm Angle adjustment: 0 dead 180° Tilt: 0 tot 45° Zenter line: 200mm Printer: 2 boven- en 2 zijdrukkers Feed table: 9500mm Export table: 6000mm Table castors: Incoming and outgoing conveyors are driven Feed: 55 m/min. Length stop rack with 0.4 m/s feed Repeatability: 0.1 - 1 mm (naar wens instelbaar)\ Noise: 81 dB Suction: ø200 mm weight 1350KG Powers: 380V, 3 Ph, 35A + 220 V, 16A

Key data: 900 , 252 , 48

Our team are currently working on this 2008, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller, 48mm plasticising unit with bi-metallic barrel and single core pull and two 16A sockets. It has only 35,000 recorded run hours. BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault  ...