127,269 used machines on RESALE, but how to find them? Machine Search
For sale I offer a Tractel grab hoist T516D. The grab hoist is an unused exhibit with slight traces of storage, which can be seen in the pictures. The grab hoist is sold with a new UVV test. Ropes can be offered on request Dates: - The T 516 D grab hoist is a powerful hand rope hoist for pulling, lifting, lowering, tensioning and securing loads - Load capacity 1600kg - Length, height, depth without hook 523x315x127mm - Rope diameter 11.5mm - Weight 13.5kg without rope Shipping available for an extra charge. Grab hoist is workshop-tested and immediately ready for use. Supplied with lever tube, without reel and without rope # Grab hoist # Lever hoist # Multi-purpose hoist # Tractel # T516 # T500 series # 1600kg # 1.6to
not working - battery discharged Auction-ID: A7-45452-185
FT-1600 Serial Number : FS417148 Trailer 1600kg 2000mmx1250mmx300mm https://foresteel.eu/product/ft-1600-tipping-trailer/ Auction-ID: A3-43520-5009
" Permanent magnetic clamping plate Narex PERMAG 160/400. The magnetic clamping plate has a switch via lateral lever (on/off). The clamping surface is designed with a longitudinal pole pitch and is suitable for clamping ferromagnetic workpieces. Product: Permanent magnetic clamping plate Manufacturer: Narex Type / Designation: PERMAG 150/400 Origin: Made in Czechoslovakia • Clamping surface: 400 × 160 mm • Height: approx. 75 mm "
Equipped with Electrode holder with 2m cable; Grounding terminal 1.5 m; Cord length 1.50 m; chipping hammer; wire brush; Stepless regulator welding current 10-160 Ampere; Cycle of operation 10 minutes; Duty Cycle 35% 160A output; Product size 400x200x300mm (lxwxh); Product weight 2 kg; Power 160 W; Unused in box (Packaging size 500x300x400 mm (lxwxh), weight 6 kg)
drilling capacity: 35 mm; drilling depth: 210 mm; speed to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: equipped with automatic cooling system; unused; 5637;
Automatic cooling system Drilling capacity 35 mm, drilling depth 210 mm Adhesive force 16000 N Speed up to N = 830 rpm Power 1600 kW in case Unused
Machine number: 2-0095 Compressive force: 28 kN Stroke: 12 mm Safety distance: 100 mm Delay travel: 0.06 s Table dimensions: approx. 190 x 150 mm with pneumatic punching tool mounted
Automatic cooling system Drilling capacity 35 mm, drilling depth 210 mm Adhesive force 16000 N Speed up to N = 830 rpm Power 1600 kW in case Unused
" Machine vice in solid cast design. • Jaw width: approx. 160 mm Product: Machine vise Manufacturer: unknown Type / Design: Machine vise, manual "
Compressive force: 28 kN Stroke: 12 mm Safety distance: 100 mm Run-time travel: 0.06 s Table dimensions: approx. 200 x 160 mm with pneumatic punching tool mounted
Gear motor, electric motor, three-phase motor, electric gear motor -Gear motor: from SUGA type STS-2 automatic lathe -Motor: Yaskawa type FELQ-7T -Power: 3.7 kW -Engine speed: 705/1340 rpm -Gearbox: Suga type SGM-1 -Speed switchable gear 16 stages: 145 -1600 rpm -Shaft: Ø 30 x 80 mm -Dimensions: 945/360/H480 mm -Weight: 233 kg
DC motor, gear motor, electric motor, spur gear motor, manual transmission -Electric motor speeds: 160/1000/2500 rpm -Power: 5.1/32/32 kW -Volt: 100-400V -Protection class: IP 22 -Gearbox manufacturer Woerner type: MVD -hydraulic: switchable -Construction: B3 -Diameter shaft: Ø mm -Dimensions: 1430/1200/H750 mm -Weight: 1740 kg
Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer:Si Smiths Industries, hydraulic pump hydraulic unit -Type: 102680-13-24 -Voltage: 24 V -Pressure: 160 Bar -Dimensions: 160/130/H330mm -Weight: 10.1 kg
Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: McBull, multi-purpose cable pulley type CSZ16BODY with steel cable -Load capacity: 1600 kg -Steel cable: Ø 11 mm / length 20 m see photos -Cable pull: Dimensions 550/130/H310 mm -Number: 2x cable pull available -Price: per piece -Transport dimensions: 560/360/H180 mm -Total weight: 23.2 kg
Drawing line Composed of Lifting platform with scale SAMPSISTEMI BD 250 A reel handling unit Drawing machine SAMPSISTEMI RC 150 / MT 160 6A year 2017 Including wire drawing machine, furnace and winding machine Maximum input material diameter 1.5 mm Output material diameter from 0.30 to 0.10 mm Automatic coil changer DIN200 Manual gearbox DIN160, P5 and P10 Installation size approx. 9000x2700x3000 mm Auction-ID: A7-45347-649
Very good spiral mixer KEMPER, type: SPL 100 -completely overhauled- - for 100 kg flour or 160 kg dough - completely overhauled - New bearings, rhymes, time clocks, painting - with center rod - 2 speeds in forward or reverse gear - Machine kmplett overhauled, as good as new, ready for immediate use - 6 months warranty Visits and test runs are possible by arrangement.
Fliegl PFW 16000 – Slurry tanker 16,000 l with dribble hose distributor General data • Machine type: Slurry tanker • Manufacturer: Fliegl Agrartechnik GmbH • Model: PFW 16000 • Year of construction: 2019 • Capacity: 16,000 l • Permissible Total weight: 23,000 kg • Condition: used Technical equipment • Tandem axle • Air brake system • Tyres: 750/60 R 30.5 • Hydraulic drawbar suspension • Suction connection 6\" left and right with automatic hydraulic shut-off • 4,000 l Armatec pump • Drag hose distributor \"Skate 150\" • Working width: 15 m • Distributor with half-side switch • Piano controls available Condition • Optical condition: used, usual signs of wear present • Technical condition: functional • Ready to use Powerful slurry tanker with modern spreading technology and high efficiency – ideal for efficien ...
Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Handover: in its current condition as inspected -Speed control: Cover damaged, handwheel missing (see photos) -Manufacturer: Flender Himmel, adjustable geared motor -Type: LK 02-M1C4 -Speed: 160-1600 rpm -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 14 x 30 mm -Dimensions: 430/210/H140 mm -Weight: 16.3 kg
Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Flender Himmel, adjustable geared motor -Type: LK 02-M1C4 -Speed: 160-1600 rpm -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 14 x 30 mm -Dimensions: 430/210/H140 mm -Weight: 16.3 kg
KraussMaffei 50-160 C1 Injection Moulding Machine Type: Injection moulding machine Manufacturer: KraussMaffei Model: 50-160 C1 Year of manufacture: 1996 Serial number: 44461 Screw diameter: ~25 mm (some units have 30 mm variants) Injection volume: 101 cm³ Injection pressure: 1488 bar Closing force: 500 kN Mould opening stroke: 350 mm: 200 mm – 550 mm Electric connection: 400 V Machine weight: 2300 kg Total dimensions (L x W x H): 3191 x 1500 x 1887 mm Clamping plate size: 540 x 540 mm Tie-bar spacing (H x V): approx. 321 x 321 mm Mould height (min/max): approx. 200/550 mm Shot volume: approx. 52 cm³ (standard) Shot weight: approx. 47 g (PS equivalent) Injection weight: 92 g Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-3
Tube grinding/satin finishing machine - For sanding, satin finishing, and high-gloss polishing - Large wrapping angle of 270° for efficient work - Belt speed infinitely adjustable - Flexible and handy - perfect for railing construction Connection voltage 230Volt Power 800W Tape dimension 40 x 760mm For pipe diameters up to 180mm Condition: never used / new (5) Auction-ID: A1-45681-874
Austrian vehicle documents, 80 km/h registration Auction-ID: A1-45690-1
Chip extraction FELDER RL 160 built in 2014, 3.0 kW 400 V, max. 3,200 m³/h, dead weight approx. 290 kg, S/N 310500814
Forklift tine extension approx. 160x14b cm (1 pair)
Desk wood décor light approx. 160b cm, base anthracite, integrated LED design lamp
A deposit of €250.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Max tool diameter 100 mm Max tool length 300 mm Max tool weight 10 kg Cutting speed 5000 mm/min Fast feed speed 15000 mm/min Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-5
Sliding door wall cabinet approx. 160 cm, intermediate shelf
Motor 1200 W, hydraulic motor 1200 W, battery 24 V, with rotator for lifting and tilting, adjustable forks Auction-ID: A1-45682-4
Office furniture light grey 2 desks each 160x80 cm, horizontal blind cabinet approx. 100x200 cm, sideboard, 2 swivel chairs, mobile pedestal, household refrigerator
maximum number of results exceeded
please refine your search
750 € 
