160 kva used for sale

Machine vise PAGUS 160 mm jaw width: 160 mm jaw height: 50 mm span: 0 - 195 mm used ! Dimensions: 530 x 256 x 110 mm

Universal measuring device, touch probe CARL ZEISS JENA 40 - 160 mm (similar to Multimar) accuracy dial gauge: 0.01 mm used, tested ! Dimensions: 320 x 70 x 40 mm

Machine vise WMW jaw width: 160 mm span: 130 mm Dimensions: 460 x 160 x 120 mm

Magnetic clamping plate, permanent magnetic PAGUS 160 x 150 x 63 mm Clamping surface: 160 x 150 mm Clamping height: 63 mm Base plate: 177 x 152 x 15 mm Centering hole: Ø 27 mm, Threaded underside: M30 x 1,75, Length: 15 mm 2x connection for coolant supply eight only individually switchable sectors !' used, tested ! Dimensions ( without coolant supply ): 184 x 177 x 63 cm

Machine vise with quick adjustment and force reinforcement RÖHM 160 mm jaw width: 160 mm jaw height: 54 mm span: 0...110 / 210 / 310 mm span in 3 steps ! used, tested ! Dimensions: 550 x 250 x 135 mm

Machine vise with quick adjustment PAGUS jaw width: 160 mm jaw height: 55 mm span: 0...105 / 205 / 305 mm span in 3 steps ! Dimensions: 550 x 220 x 180 mm

Rotary table with 4 jaw chucks PAGUS diameter: Ø 160 mm table height: 160 mm lathe chuck 360° rotatable ( manual, without gearbox ) with 15° detent ( small lever ) two levers for clamping the lathe chuck used, tested ! Dimensions: 390 x 330 x 160 mm

Machine vise WMW jaw width: 160 mm jaw height: 48 mm span: 0...200 mm used, tested ! Dimensions: 500 x 160 x 130 mm

Machine vise PAGUS jaw width: 160 mm jaw height: 50 mm span: 0...320 mm (3 stages: 120, 220, 320 mm) pneumatic clamping force reinforcement ! on rotary table with graduation 360° rotatable Dimensions: 550 x 350 x 170 mm

Machine vise WMW, ROTO RECORD SN 160 jaw width: 160 mm jaw height: 50 mm span: 0...130 mm used ! Dimensions: 480 x 160 x 125 mm

Heating pump, chemical pump KSB ETALINE GN 032-160/302 G11 Q = 24 m3/h H = 20 m 50/60 Hz 400/690 V motor: 3 KW IP 55 New !' Dimensions 65x31x40 cm

Centrifugal pump with coupling, water pump KSB CPK-Gm32-160 Q = 166 l/s H = 38.5 m n = 2900 rpm shaft Ø 24 mm Dimensions: 480 x 300 x 290 mm

Circulation pump, centrifugal pump, water pump, chemical pump KSB ETALINE GN40-160/902 Ausf. GN6, CD4090 with control unit VarioDrive Type:30FV1 DN60 380 V very good condition Dimensions: 680 x 310 x 470 mm

Centrifugal pump, water pump CALPEDA B NM20/160BE Qmax = 6.6 m3/h Hmax = 30.5 m motor: 0.75 kW 230 / 380 V for AGIE CUT 300 Dimension 380 x 260 x 220 mm

Centrifugal Pump, Heating Pump, Chemical Pump WILO IPN 80/160-11/4 16 / 13 bar 120 / 140 °C motor: 1.1 kW 220 / 380 V flange: 200 mm used, tested ! Dimensions: 360 x 240 x 480 mm

Standard pump, annular casing pump, centrifugal pump, water pump KSB ETACHROM B 32-160/054.1 Q: 5 - 16 m3/h H: 10.2 - 8.3 m motor: 0.55 kW 220 - 240 / 380 - 420 V stainless steel housing, new ! Dimensions: 490 x 260 x 320 mm

Machine Glass Thermometer, Thermometer CONATEX 0 to 160 °C 580781 SM000066 L= 100 mm 1/2 in New ! Dimensions: 380 x 90 x 40 mm

Pressure gauge set MANOMETERWERK KARL-MARX-STADT Pressure gauge 60 0 - 16 MPa (0 - 160 bar) Scale: 0 - 300 kN TGL 8701 Housing diameter: Ø 60 mm Pressure gauge set (2 pieces) ! New !' Dimensions(Single Pressure Gauge): 71 x 71 x 65 mm

Pressure gauge with shut-off valve WIKA 160 bar pressure gauge: stainless steel Ø 100 mm KL1.0 Valve thread: 3/4 New ! Dimensions: 330 x 220 x 140 mm

Pressure gauge MEASURING INSTRUMENT PLANT BEIERFELD 1/BSi20/2 0 - 16 MPa (0 - 160 bar) TGL16374 Accuracy class: 1 Housing diameter: Ø 160 mm Connection thread: M20 x 1.5 New !' Dimensions: 200 x 160 x 55 mm

3-jaw chuck, three-jaw chuck with flange PAGUS outer Ø: 160 mm bolt circle Ø (flange) : 105 mm bore Ø: 40 mm height with jaws: 105 mm Dimensions: 160 x 160 x 105 mm

Lifting Spindle Drive, Electric Cylinder FRAMO Type Mini 2 (8-2020-00.00. 00) D/A stroke: 160 mm lifting capacity: 5300 N rod diameter: Ø 28 mm motor: 0.5 kW 1360 rpm 400 V 3AC IP54 2x approx. 1.0 m connection cable New ! Dimensions: 430 x 115 x 160 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Straightening Table PAGUS Work surface: 1600 x 1000 mm Height: 770 mm used, tested ! Dimensions: 1620 x 1010 x 800 mm

Angle table with adjustable attachment, clamping bracket, T-slot plate WMW - Consists of 2 parts. Clamping surface: 1600 x 850 x 680 / 760 mm Number of grooves: 6 Groove width: 20 / 38 mm Hole spacing at the base: 130 mm Dimensions: 1600 x 850 x 680 / 760 mm

Milling cutter mandrel , tool holder, with tightening thread WMW 4 x 25 x 160 ( 4x25x160 ) TGL 30-4113 MK4 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 490 x 45 x 45 mm

Milling cutter mandrel, tool holder, with tightening thread WMW 3 x 25 x 160 ( 3x25x160 ) TGL 30-4113 MK3 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 425 x 45 x 45 mm

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 160-254 mm -Load capacity: 4000 kg -Number: 1x terminals available -Price: per piece -Weight: 11 kg

Eccentric shaft by drawing K04.038.842-22-402 for hot stamping press K04.038.842 (K8542), 1600T brand new in state stale from stock W 4675 kg

Three-phase motor, electric motor -Voltage: 220 V -Power: 0.06 kW -Speed: 1600 rpm -Shaft: Ø 9 x 20 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 195/155/H155 mm -Weight: 4 kg

Gear motor, electric motor -Motor comes from: Gansow scrubber dryer -Connection: 24 volts -Speed: 160 rpm -Power: 1 kW -Shaft diameter: Ø 25 mm -Number: 8 available -Price: per piece -Dimensions: 390/140/H160 mm -Weight: 13 kg

Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice -Sale: as a spare part carrier -Jaw width: 160 mm -Back height: 50 mm -Span width: max. mm -Lower part: 1 -Dimensions: 330/550/H160 mm -Weight: 47 kg

geared motor, electric motor -Speed: 160 rpm -Power: 0.55 kW -Design: B5 -Shaft diameter: Ø 28 mm -Protection class: IP 44 -Number: 1x motor available Price: per piece -Dimensions: 470/160/H200 mm -Weight: 22 kg

Gear motor, electric motor -Speed: 160 rpm -Power: 0.25 kW -Construction: B3/5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: 325/210/H195 mm -Weight: 13 kg

Gear motor, electric motor -Speed: 160 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 480/200/H240 mm -Weight: 27 kg

Three-phase motor, electric motor -Motor: is unused -Power: 160 kW -Speed: 2960 rpm -Shaft: Ø 65 mm -Protection class: IP 54 -Construction: B35 -Dimensions: 1190/920/H730 mm -Weight: 730 kg

Gear motor, electric motor -Speed: 160 rpm -Power: 0.37 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Weight: 23 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Müller & Georg, geared motor type ZGO G3 K 4 -Speed: 160 rpm -Power: 0.25 kW -Design: B3 -Shaft: Ø 22 x 50 mm -Protection rating: IP 54 -Dimension: 450/158/H205 mm -Weight: 14.8 kg

DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Kählig, DC gear motor -Speed: 146 -Voltage: 160 V -Power: 300 W / 3000 rpm -technical data: see photo type plate -Shaft: Ø 16 x 27 mm -Dimensions: 320/120/H155mm -Weight: 10 kg

DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Dierking, DC gear motor type SO GP 86-2L -Voltage: 160 V -Power: 300 watts -Speed: 3000/146 rpm / i = 20.5 : 1 -Shaft: Ø 16 x 30 mm -Dimensions: 320/160/H150 mm -Weight: 10.1 kg

three-phase motor, electric motor -Power: 160 kW -Speed: 1485 rpm -Shaft: Ø 80 x 170 mm -Protection class: IP 55 -Type: B3 -Quantity: 1 piece available -Dimensions: 1230/880/H630 mm -Weight: 1015 kg

Nabertherm High Temperature Furnace 1600 °C The high-temperature furnaces HT 04/16 - HT 450/18 have proven themselves for many years in the laboratory and for production. Whether for quartz glass, glass-ceramics, the sintering of CIM components or other processes up to With a maximum temperature of 1800 °C, these furnaces represent the optimal solution for the sintering process. Thanks to their solid construction in a compact free-standing model, these high-temperature furnaces are suitable for processes in the laboratory where maximum precision is required. Excellent temperature uniformity and sensible details set unsurpassable quality standards. Tmax 1600 °C Double-walled housing construction with fan cooling, resulting in low outer wall temperature Heating from both sides via molybdenum disilicide heating elements High-quality fibre insulation with special rear i ...

transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Legrand, Transformer Transformer -Type: 42304 -Power: 160 VA -Dimensions: 150/110/140 mm -Weight: 4.6 kg

TECOM BLOWN FILM EXTRUDER, for LDPE-RLDPE blends, Contrex feeding, 2 gravimetric components + 1 volumetric dosing units, Screw diam.70 mm 30 L/D, Rotating head, Low neck, 1.600 mm pull off unit, gusseting unit, Cason corona treatment, single color printer (for marks), 1.600 mm double collection frame, BRA 36+ Eurochiller, working width: 1600, availability: February 2026

HOT-AIR SEALING SLITTER, to be positioned on top of rewinder in extrusion lines or on top of unwinder in bag makers., It creates a RIBBON SEAL. (adjustable width) on the web as per photo, while slitting, Adjustable air-blow to determine the sealed ribbon width Adjustable temperature Adjustable speed Adjustable width of the slit parts (200+1.400 mm./ 300+1.300 mm./ 400+1.200 mm.,…) minimum slitting at 200 mm. Complete with control panel, The machine is offered RECONDITIONED and TESTED

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Total length: 160 mm -Width/Height: 30 mm -Dimensions: see drawing in the photos -Weight: 0.7 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Drive: 5.5 kW -Speed: 1400 rpm -Intake volume: 160 m³/h -Weight: 240 kg

Tool steel, round material, shaft sectionShaft, steel block, shaft sawnCold work tool steel 1.2842Material section 400 mm x length 165 mmNet weight: approx. 160 kgMaterial number: 1.2842Material abbreviation: 90MnCrV8Cold-work tool steel with high hardness acceptance and good dimensional stability during hardeningApplication in toolmaking for cutting, punching and embossing tools.Rollers and profile rollers, measuring tools, guide rails, paper cutting knives. Delivery condition: Annealed to max. 229 HBug strength in delivery condition: 770

Three-phase motor, electric motor -Power: 160 kW -Speed: 2960 rpm -Voltage: 500 V (delta) -Protection class: IP 23 -Design: B3-B5 -Shaft: Ø 70 mm -see photo nameplate for further details -Weight: 830 kg

Auction-ID: A1-44832-724

For sale I offer a Tractel grab hoist T516D. The grab hoist is an unused exhibit with slight traces of storage, which can be seen in the pictures. The grab hoist is sold with a new UVV test. Ropes can be offered on request Dates: - The T 516 D grab hoist is a powerful hand rope hoist for pulling, lifting, lowering, tensioning and securing loads - Load capacity 1600kg - Length, height, depth without hook 523x315x127mm - Rope diameter 11.5mm - Weight 13.5kg without rope Shipping available for an extra charge. Grab hoist is workshop-tested and immediately ready for use. Supplied with lever tube, without reel and without rope # Grab hoist # Lever hoist # Multi-purpose hoist # Tractel # T516 # T500 series # 1600kg # 1.6to