127,707 used machines on RESALE, but how to find them? Machine Search
General SKU207S029 LocationBarneveld MakeJulabo TypeFC-1600T Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pumpcheck (Immersion Pump) Capacity28 Ltr./min Information Mach.No.10255538 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...
General SKU207S024 LocationBarneveld MakeJulabo TypeFC-1600T Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pumpcheck (Immersion Pump) Capacity28 Ltr./min Information Mach.No.10148818 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...
Extraction system manufactured in 2022. This SCHUKO Solo-160-2323/30/182/BD features an impressive airflow of approximately 15,500 m³/h, designed for handling dry plastic chips. It includes a total filter area of 182 m² and a filter hose diameter of 160 mm. If you are looking to get high-quality extraction capabilities, consider the SCHUKO Solo-160-2323/30/182/BD machine we have for sale. Contact us for further details.
This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details.
This 6-axis ABB IRB 1600 M2004 robot arm was manufactured in 2008. It features a net weight of 250kg, a maximum handling weight of 8kg, and a reach of 1.45m. If you are looking to get high quality automation capabilities consider the ABB IRB 1600 M2004 machine we have for sale. Contact us for more information about this machine.
General SKU212T501 LocationBarneveld MakeBarriquand TypeIXAP 5+4/8x1 x 1000 x 160 No.213712 B Year of construction2001 Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface1.9 m2 Size length1000 mm Sizes width160 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Heating surface1,9 m² CapacityCircuit A (water): 5 Ltr, Circuit B (product): 20 Ltr. Number of platens9 ConnectionsDN25 (4x) Max. temperature-10/200 °C Information Mounted on legscheck Weight350 Kg Floorspace1,25x0,4 m Total height1 m Extra SpecificationsThe Barriquand IXAP 5+4/8x1 x 1000 x 160 is a versatile plate heat exchanger designed to facilitate efficient heat transfer across various applications. It operates through two distinct circuits, A and B, each catering to specific needs. Circuit ...
General SKU290S402 LocationBarneveld MakeF. Widmann & Sohn Apparatebau (D) Type160 Ltr. No.1346B-3 Year of construction1966 Pressure Working pressure jacket4 Bar Main Features MaterialStainless steel Volume160 Ltr. Specified Features - Cooking pan Cooking vesselcheck Capacity160 ltr. Vessel sizesdia. 680x600mm With jacket31 ltr. Without motorcheck Vessel can be tiltedcheck MaterialStainless steel 1.4541 (321) Information Floorspace1,4x1,1 M Total height1,0 M Weight150 KgCooking pansF. Widmann & Sohn ApparatebauStirring vessels > Cooking pansBrand > F. Widmann & Sohn Apparatebau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU434W1401 LocationBarneveld MakeFerrum TypePUR-1600 H No.47-1366 Year of construction1986 Main Features MaterialStainless steel Inlet diameter60 mm Specified Features - Basket centrifuge Basket centrifugecheck Capacity800 l. Basket sizesDia. 1600x800 mm Max. loading weight1000 kg With bottom dischargecheck Liquid outletDN200 Without motorcheck Max. basket speed0-750 rpm MaterialStainless steel 1.4401 (316) Information Mounted on foundation platecheck Total height3,10 m Weight10.000 kg Floorspace3,20x2,50 mBasket centrifugesFerrumCentrifuges > Basket centrifugesBrand > Ferrum What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
ON 17.12.25, A FULL AUDIT OF THE MACHINE WAS CARRIED OUT BY THE MANUFACTURER'S SERVICE Report available WORKING HOURS: 80H (START-UP ONLY) PRICE OF A NEW MACHINE: 7,500,000 EURO • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 •Year of manufacture: 2020/ first commissioning year 2021 • Last operation: 2022 Specifications • Working width: 1600 mm • Suitable material: Polypropylene (PP), MFI 230 /2.16 > 400 g/10 min • Capacity: Up to 65 kg/h per meter of width • Product weight: 10-80 g/m² • Production speed: 5-80m/min • Nozzle head: MB 1600, 50 h/inch • Extruder: RT-1101-1-100, L/D 30 • Rotary beam heating power: 65-172 kW • Winding station: contact winding machine with automatic coil change • Maximum winding diameter: 1250 mm • Web width: 1700 mm • Winding tens ...
General SKU437W1434 LocationBarneveld MakeMLS GmbH TypeEthos 1600 Mach.No.123 840 Main Features Motor2.5 KW Specified Features - Miscellaneous Motor2,5 kW, 230 volt Information Year of constructionunknown Total height0,75 m CEcheck Floor space1,0x0,70 m Weight80 kg Extra SpecificationsLab microwave for synthesereaction suction cap. 108 m3/h with Lab control terminal, : Alldos vacuum pump MiscellaneousMLSMiscellaneous > MiscellaneousBrand > MLS What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
OVERHAULED - Size: 1.600 x 2.000 mm - With Electrical motor and springs.
Size: 1.600 x 5.500 mm - Decks: 2 - Included Electrical motor and springs - Will be overhauled, sandblasted and painted
OVERHAULED - Size: 1.600 x 1.200 mm - 2 Pcs. SE 1,5 / 4 (0,8 kW / 1.400 RPM) (220 / 380V. - 3,7 / 2,15A) Unbalance Motors - Rubber protection
This 3-axis Johnford VMC-1600S was manufactured in 2014. It features a longitudinal travel of 1600 mm, cross travel of 1100 mm, and vertical travel of 800 mm. The machine has a robust table working surface of 1800 x 1000 mm and a maximum table load capacity of 4600 kg. If you are looking to get high-quality milling capabilities, consider the Johnford VMC-1600S vertical machining centre we have for sale. Contact us for further details.
This 3-axis BURMEK SPL 160.2 was manufactured in 1996. It features a maximum workpiece length of 13,000 mm, a maximum workpiece height of 180 mm, and a maximum workpiece width of 250 mm. With a robust machine weight of approximately 3,900 kg, it is designed for durability. If you are looking to get high-quality woodworking capabilities, consider the BURMEK SPL 160.2 machine we have for sale. Contact us for further details.
Key data: 1500 mm, 22 kN
TC500 Bj.1999 Partially overhauled with tools Working area y1600 x3000 Bosch control with graphics programming Tool changer 21 stations (with multi-tool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service
Key data: 1500 mm, 22 kN
TC500 Bj.1998 Partially overhauled with tools Working area y1600 x3000 Bosch control with graphics programming Tool changer 21 stations (with multi-tool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service
OVERHAULED - Power: 10,9 / 7,2 kW - Amperage: 49,3 / 32,5A - Voltage: 220V. DC - L x W: 1.600 x 1.300 mm - Conveyor belt: 1.400 mm - AA.: 2.530 mm - With Transformator rectifier from 380V. AC to 220V. DC - Overband separator is sandblasted and painted.
Power: 56,1 kW - Amperage: 173 A - Voltage: 300V. DC - 100% ED Magnet L x W: (1.800 + 2 x 450=) 2.700 x 1.600 mm - Conveyor belt: 1.600 mm - AA.: Ca. 4.500 mm
total power requirement:36 kW Available from approximately week 15 of 2026 A well-maintained gear grinding machine including: Automation Promot, year of manufacture 2012 Filtration system Hoffmann YOM 2012
GAMMA MECCANICA AF EXTRUSION LINE (photos and video taken before reconditioning - video includes shredder+granulator available separately), for LDPE LLDPE HDPE PP PS PC ABS, Nominal production rate : 900-1100 kg/h (this varies on material and feeding rate), Average energy consumption : 0,23-0,28 kwh/kg, inlcuding :, Buffer silo, screw conveyor, crammed feeding system, extruder with 160 mmm. screw 36 LD, double degassing system, hydraulic non-stop screenchanger 160/300MF, water ring pelletizer type TFD1000, centrifugal dryer, always ran with clean production scraps, very good running conditions - connected, The line is offered AS IS, See [Constructors page](.gamma-meccanica.it/en/plastic-recycling/plastic-recycling-af/) for more info, options available: reconditioning, capacity: 1.000 kg/h, type: for LDPE HDPE LLDPE PP PS PC ABS
nominal force:160 t stroke:140 mm no. of strokes:85 /min distance between columns:400 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:400 x 450 mm table height over floor:800 mm Allowed max. force:230 t ram surface:400 x 320 mm spindle diameter:125 mm power requirement:7,35 kW weight:5,0 t dimensions (WxDxH):1,7 x 1,2 x 2,9 m
Manufacturer: Hans Schoen Model: NH 160 Year of Manufacture: 1988 rebuilt in 2016 The press is being sold without tools or spare parts. Technical Data Press force max.: 1,600 kN Main drive power: 30 kW Speeds Rapid advance from: 300 mm/sec Pressing speed: 18 mm/sec Rapid return: 300 mm/sec Strokes Max. stroke: 150 mm Max. daylight opening: 450 mm Table and Ram Dimensions Ram area: 730 × 560 mm Table area: 650 × 650 mm Openings Front vertical opening: 750 mm Side vertical opening: 250 mm Heights Table height above floor: 850 mm Table bore diameter: 150 mm Ram bore, Ø H7: 60 mm T-slots T-slots in table, DIN 650 H12 diagonal: 22 mm T-slots in ram, DIN 650 H12: 22 mm Two pieces, front to back Machine Dimensions Machine footprint approx.: 1,850 × 1,500 mm Machine height approx.: 2,850 mm Find more here - / Contact us at -
A lifting tipper from Masz Gliwice is offered on behalf of the customer. The tipper is about 360cm high and tilts at about 210cm (see photo Rheon). Since there is no test book or similar, the tipper may not be used in Germany and must be welded in one place. The condition is otherwise very good. The mount is for a Diosna SP160 AD tank car. The machine is dismantled at the bakery and can be picked up there.
Engine Brand: DAF, Condition: RECONDITIONED, Nominal Power @ Nominal Rpm: 160 Kw, Bore: 118 mm, Stroke: 132 mm, Qty Cylinders: 6 Qty, Engine Fuel Type: diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Engine Condition: Rebuild , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 168 Kw, Rated Speed: 2100 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/daf-gs-160-m-reconditioned -engine/17883, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: GS160M; Transport weight [kg]: 950
pallet decoiler, max. load 3,000 kg, Voltage 380 V - 50 Hz,
thickness of jaw: 160 mm max. clamping width: 240 mm ca. tension force: 4,5 to high of jaw: ca. 60 mm Dimensions (L/W/H): ca. 550 x 160/250 x 140 mm weight: ca. 50 kg High pressure vice with turning plate. Fixed low special price. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Table dimensions: 1.200 x 780 mm Motor output: 7,5 kW Spindle diameter: 30 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING grinding length: 1600 mm grinding width: 900 mm workpiece height (max) with largest wheel: 600 mm number of processing axes (excl parallel axes): 3 TABLE (SURFACE GRINDING) table surface (left-right): 1600 mm table surface (front-back): 800 mm SPINDLESTOCK GRINDING SPINDLE X-axis travel: 1700 mm spindle revolutions (max): 1000 /min GRINDING TOOL type of grinding tool: wheel diameter (max): 500 mm borehole: diameter: 203.2 mm width: 100 mm ELECTRICAL SPECIFICATIONS total power consumption: 30 kW mains voltage: 400 V mains frequency: 50 Hz
CONTROLS PC controller BECKHOFF PRESS DESIGN drive system: knuckle-joint SLIDE total force (nominal): 160 to stroke: 60 mm stroke rate (max.): 70 /min COUNTER RAM nominal force: 40 to stroke: 14 mm V-RING nominal force: 50 to stroke: 10 mm TOOL DIMENSIONS lower table (left-right): 480 mm lower table (front-back): 520 mm upper table (left-right): 480 mm upper table (front-back): 520 mm shut height max.: 314 mm ram adjustment: 80 mm distance between columns (H-frame): 500 mm passline opening (free passage in side columns): 220 mm STRIP-FEEDER feeder type: roll feeder sheet width max.: 210 mm sheet thickness max.: 6 mm feeding step max.: 999 ...
A Kjellberg plasma cutting system is available. Plasma source: Kjellberg HiFocus 160i, max. material thickness: 40mm, track width: approx. 3100mm, gantry dimensions X/Y: 2000mm/2000mm, runway height: 500mm, working dimensions X/Y: 2000mm/12000mm. The machine was expanded with inkjet in the year 2015. Including suction and filter. The control was renewed in the year 2021. Documentation available. An inspection on site is possible.
CONTROLS PC controller BECKHOFF Offer for services of complete Overhaul of a Customer-Supplied Fineblanking Press FEINTOOL GKP 160Scope of Overhaul• Complete disassembly into individual components• Inspection of all parts, including crack testing of critical components• Overhaul of the drive system, new motors• Reworking and precise alignment of all guideways• Complete overhaul of the hydraulic cylinders• Overhaul of the clamping tables• Installation of a new hydraulic unit• Renewal of the pneumatic system• Renewal of the electrical systemModernisation / Retrofit• Combined table • Servo feed systems• Central lubrication system • RAZIOL band lubrication• New brake/clutch unit• BECKHOFF PC-based control system with touch panel• PILZ safety control system• Implementation of CE ...
Key data: 160 mm
Safeway PHV 160 - Hydraulic Machine Vise - Hydraulic vise with hand crank Specifications - Jaw size: 160 x 60 mm - Wingspan: 300 mm - Clamping force: 4100 kg - Mounting hole spacing/Ø: 200 / 18 mm - Dimensions LxWxH: approx. 740 x 240 x 150 mm - Weight: approx. 60 kg
Vertical machining centre BRIDGEPORT GX 1600 - travel 1600x700x635 mm, CNC FANUC 0i-MD - coolant thrugh spindle, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1700x700 mm, Longitudinal travel x axis: 1600 mm, Cross travel y axis: 700 mm, Vertical travel z axis: 635 mm, Working feed x-y-z axes: 0 - 36.000 mm/1, Rapid feed x-y-z axes: 36 mt/1, Spindle taper type: 40 DIN-BT, Automatic tools change nr.: 30, Spindle speed: 0- 12.000 rpm, Spindle motor power: 22 Kw, Cnc: FANUC 0i_MD, Approx net weight: 10.000 Kg, accessories: Chip conveyor, coolant tank, coolant thrugh spindle
Offer 25430 Specifications: - Nominal pumping speed 160 m³/h - Vacuum container VE 350 - 160 350 l - Drive 400 V / 4 kW - Space requirement approx. W 2000 x D 600 x H 1250 mm - Weight approx. 250 kg
Dimensions (L/W/H): 1000x1500x1800 mm Weight: 570 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1860x2700x1450 mm Weight: 350 kg Total power requirement: 5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Engel Model: Emotion 440/160 Year of Manufacture: 2018 Max. installation height :460 mm • Center support package • Max. closing force :1600 kN Cylinder size: 40 mm • Screw CRN coated • OptiShut backflow preventer • max. spray pressure 1940 bar • Injection volume 55-220 cc Max. injection weight :174 g Operating hours: 33526 h Equipment: • 1 core pull incl. auxiliary unit • Plasticizing cylinder set, highly wear-resistant design • Needle valve nozzle • E-Flomo • IQ weight control • IQ Clamp control • EM 63 interface • separate water and electricity connections Find more here - / Contact us at -
Dimensions (L/W/H): 3500x1950x1500 mm Weight: 2500 kg Total power requirement: 58,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, testing is possible by prior arrangement.
Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: MPB The scope of delivery includes: 01x Pallet rack crossbar, new Material colour: yellow Box profile: 160 x 50 x 1.75 mm Truss type: AUF ́B ́E0436 Agraffe: 4 HK (hooks) Clear width: 3,400 mm 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.
- Producer Printworld - Type PUVD 1600-2 - Year of construction 2008 - Working width 1.600 mm - Working height 1.030-1.050 mm - Max. part height 25 mm - Operationside left - Number of lamp from top 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 120 W/cm - Selective shiftable 60 / 90 / 120 W/cm - Conveyor with netbelt - Feed speed adjustable 2 - 50 m/min - Installation length 3.300 mm - Machine measure 3,3 x 2,5 x 1,8 m - Location - Voltage / HZ 400 / 50
spindle diameter: 160 mm x-travel: 10500 mm y-travel: 4000 mm spindle taper: ISO 50 z-travel: 950 mm turning speeds: 3,15-1000 U/min transmission ratio: 4 spindle power: 58 kW Support sleeve: 340x400 mm w-travel: 900 mm Feed: x 0,12-9600 mm/U Feed: y/z/w 0,1-5600 mm/U Plate area: 39,5 m² Plate: 5400x3500 mm Plate: 5900x3500 mm T-slot - distance: 365 mm T-slots: 35/75 mm Thickness of the plate: 360 Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or ...
Year of manufacture: 2021, Length: 600 cm, Technical condition: very good, Visual appearance: very good, Damages: none, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, you are welcome by appointment.
Dutchi DM1 160 M4 electric motor with 11 kW and 1440 rpm at 50 Hz and 13.2 kW and 1730 rpm at 60 Hz, sizes: 600x320x430 mm (LxWxH), weight: 113 kg;
Used hot air generator with oil burner Ready for operation at the site
ATB 3~ Motor AF 160M/4A-11 11 kW 1465 1/min 50/60 Hz 82kg Electric Motor Hersteller: ATB Teilenummer: 465046H Type: AF 160M/4A-11 Anwendung: 3~ Motor, Pumpenmotor, Electric Motor Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 4005711 Weitere Informationen: Vollständig getestete Motor
used
ABB IRB 1600 M2004 Industrial Robot with IRC5 Controller – Used, Serviced Manufacturer - ABB Robot Model - ABB IRB 1600 M2004 Controller - IRC5 Controller - Includes IRC5 control cabinet / control unit Type / Configuration - Industrial articulated robot - With Manipulator + Controller - Includes A-position encoder (as stated: mit A-Positionierer”) Condition - Used - Controller was serviced / refurbished: - Deep cleaning of controller - Replacement of filters - Replacement of C-MOS battery - Replacement of SMB battery Find more here - / Contact us at -
maximum number of results exceeded
please refine your search
