160 kva used for sale

OVERHAULED - Size: 1.600 x 1.200 mm - 2 Pcs. SE 1,5 / 4 (0,8 kW / 1.400 RPM) (220 / 380V. - 3,7 / 2,15A) Unbalance Motors - Rubber protection

OVERHAULED - Power: 10,9 / 7,2 kW - Amperage: 49,3 / 32,5A - Voltage: 220V. DC - L x W: 1.600 x 1.300 mm - Conveyor belt: 1.400 mm - AA.: 2.530 mm - With Transformator rectifier from 380V. AC to 220V. DC - Overband separator is sandblasted and painted.

Power: 56,1 kW - Amperage: 173 A - Voltage: 300V. DC - 100% ED Magnet L x W: (1.800 + 2 x 450=) 2.700 x 1.600 mm - Conveyor belt: 1.600 mm - AA.: Ca. 4.500 mm

Manufacturer: Hans Schoen Model: NH 160 Year of Manufacture: 1988 rebuilt in 2016 The press is being sold without tools or spare parts. Technical Data Press force max.: 1,600 kN Main drive power: 30 kW Speeds Rapid advance from: 300 mm/sec Pressing speed: 18 mm/sec Rapid return: 300 mm/sec Strokes Max. stroke: 150 mm Max. daylight opening: 450 mm Table and Ram Dimensions Ram area: 730 × 560 mm Table area: 650 × 650 mm Openings Front vertical opening: 750 mm Side vertical opening: 250 mm Heights Table height above floor: 850 mm Table bore diameter: 150 mm Ram bore, Ø H7: 60 mm T-slots T-slots in table, DIN 650 H12 diagonal: 22 mm T-slots in ram, DIN 650 H12: 22 mm Two pieces, front to back Machine Dimensions Machine footprint approx.: 1,850 × 1,500 mm Machine height approx.: 2,850 mm Find more here - / Contact us at -

A lifting tipper from Masz Gliwice is offered on behalf of the customer. The tipper is about 360cm high and tilts at about 210cm (see photo Rheon). Since there is no test book or similar, the tipper may not be used in Germany and must be welded in one place. The condition is otherwise very good. The mount is for a Diosna SP160 AD tank car. The machine is dismantled at the bakery and can be picked up there.

Engine Brand: DAF, Condition: RECONDITIONED, Nominal Power @ Nominal Rpm: 160 Kw, Bore: 118 mm, Stroke: 132 mm, Qty Cylinders: 6 Qty, Engine Fuel Type: diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Engine Condition: Rebuild , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 168 Kw, Rated Speed: 2100 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/daf-gs-160-m-reconditioned -engine/17883, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: GS160M; Transport weight [kg]: 950

Table dimensions: 1.200 x 780 mm Motor output: 7,5 kW Spindle diameter: 30 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: knuckle-joint SLIDE   total force (nominal): 160 to   stroke: 60 mm   stroke rate (max.): 70 /min COUNTER RAM   nominal force: 40 to   stroke: 14 mm V-RING   nominal force: 50 to   stroke: 10 mm TOOL DIMENSIONS   lower table (left-right): 480 mm   lower table (front-back): 520 mm   upper table (left-right): 480 mm   upper table (front-back): 520 mm   shut height max.: 314 mm   ram adjustment: 80 mm   distance between columns (H-frame): 500 mm   passline opening (free passage in side columns): 220 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 210 mm   sheet thickness max.: 6 mm   feeding step max.: 999.9 mm   sheet length min: 2000 mm   pilot release system: yes   band lubrication system: yes Complete refurbished fineblanking press: disassembly into individua ...

A Kjellberg plasma cutting system is available. Plasma source: Kjellberg HiFocus 160i, max. material thickness: 40mm, track width: approx. 3100mm, gantry dimensions X/Y: 2000mm/2000mm, runway height: 500mm, working dimensions X/Y: 2000mm/12000mm. The machine was expanded with inkjet in the year 2015. Including suction and filter. The control was renewed in the year 2021. Documentation available. An inspection on site is possible.

Key data: 160 mm

Safeway PHV 160 - Hydraulic Machine Vise - Hydraulic vise with hand crank Specifications - Jaw size: 160 x 60 mm - Wingspan: 300 mm - Clamping force: 4100 kg - Mounting hole spacing/Ø: 200 / 18 mm - Dimensions LxWxH: approx. 740 x 240 x 150 mm - Weight: approx. 60 kg

CONTROLS   PC controller BECKHOFF Offer for services of complete Overhaul of a Customer-Owned Fineblanking Press FEINTOOL GKP 160 Scope of Overhaul • Complete disassembly into individual components • Inspection of all parts, including crack testing of critical components • Overhaul of the drive system, new motors • Reworking and precise alignment of all guideways • Complete overhaul of the hydraulic cylinders • Overhaul of the clamping tables • Installation of a new hydraulic unit • Renewal of the pneumatic system • Renewal of the electrical system Modernisation / Retrofit • Combined table • Servo feed systems • Central lubrication system • RAZIOL band lubrication • New brake/clutch unit • BECKHOFF PC-based control system with touch panel • PILZ safety control system • Implementation of CE conformity Notes • Special options and customer-specific ext ...

Vertical machining centre BRIDGEPORT GX 1600 - travel 1600x700x635 mm, CNC FANUC 0i-MD - coolant thrugh spindle, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1700x700 mm, Longitudinal travel x axis: 1600 mm, Cross travel y axis: 700 mm, Vertical travel z axis: 635 mm, Working feed x-y-z axes: 0 - 36.000 mm/1, Rapid feed x-y-z axes: 36 mt/1, Spindle taper type: 40 DIN-BT, Automatic tools change nr.: 30, Spindle speed: 0- 12.000 rpm, Spindle motor power: 22 Kw, Cnc: FANUC 0i_MD, Approx net weight: 10.000 Kg, accessories: Chip conveyor, coolant tank, coolant thrugh spindle

Offer 25430 Specifications: - Nominal pumping speed 160 m³/h - Vacuum container VE 350 - 160 350 l - Drive 400 V / 4 kW - Space requirement approx. W 2000 x D 600 x H 1250 mm - Weight approx. 250 kg

Dimensions (L/W/H): 1000x1500x1800 mm Weight: 570 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1860x2700x1450 mm Weight: 350 kg Total power requirement: 5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Engel Model: Emotion 440/160 Year of Manufacture: 2018 Max. installation height :460 mm • Center support package • Max. closing force :1600 kN Cylinder size: 40 mm • Screw CRN coated • OptiShut backflow preventer • max. spray pressure 1940 bar • Injection volume 55-220 cc Max. injection weight :174 g Operating hours: 33526 h Equipment: • 1 core pull incl. auxiliary unit • Plasticizing cylinder set, highly wear-resistant design • Needle valve nozzle • E-Flomo • IQ weight control • IQ Clamp control • EM 63 interface • separate water and electricity connections Find more here - / Contact us at -

Dimensions (L/W/H): 3500x1950x1500 mm Weight: 2500 kg Total power requirement: 58,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: MPB The scope of delivery includes: 01x Pallet rack crossbar, new Material colour: yellow Box profile: 160 x 50 x 1.75 mm Truss type: AUF ́B ́E0436 Agraffe: 4 HK (hooks) Clear width: 3,400 mm 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

- Producer Printworld - Type PUVD 1600-2 - Year of construction 2008 - Working width 1.600 mm - Working height 1.030-1.050 mm - Max. part height 25 mm - Operationside left - Number of lamp from top 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 120 W/cm - Selective shiftable 60 / 90 / 120 W/cm - Conveyor with netbelt - Feed speed adjustable 2 - 50 m/min - Installation length 3.300 mm - Machine measure 3,3 x 2,5 x 1,8 m - Location - Voltage / HZ 400 / 50

spindle diameter: 160 mm x-travel: 10500 mm y-travel: 4000 mm spindle taper: ISO 50 z-travel: 950 mm turning speeds: 3,15-1000 U/min transmission ratio: 4 spindle power: 58 kW Support sleeve: 340x400 mm w-travel: 900 mm Feed: x 0,12-9600 mm/U Feed: y/z/w 0,1-5600 mm/U Plate area: 39,5 m² Plate: 5400x3500 mm Plate: 5900x3500 mm T-slot - distance: 365 mm T-slots: 35/75 mm Thickness of the plate: 360 Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or ...

Dutchi DM1 160 M4 electric motor with 11 kW and 1440 rpm at 50 Hz and 13.2 kW and 1730 rpm at 60 Hz, sizes: 600x320x430 mm (LxWxH), weight: 113 kg;

Used hot air generator with oil burner Ready for operation at the site

ABB IRB 1600 M2004 Industrial Robot with IRC5 Controller – Used, Serviced Manufacturer - ABB Robot Model - ABB IRB 1600 M2004 Controller - IRC5 Controller - Includes IRC5 control cabinet / control unit Type / Configuration - Industrial articulated robot - With Manipulator + Controller - Includes A-position encoder (as stated: mit A-Positionierer”) Condition - Used - Controller was serviced / refurbished: - Deep cleaning of controller - Replacement of filters - Replacement of C-MOS battery - Replacement of SMB battery Find more here - / Contact us at -

Spiral mixer Diosna SP 160 AD/T revised and repainted immediately available in stock for sale. - Extendable spiral mixer with 2 stainless steel boilers - Manufacturer: Diosna Dierks & Söhne GmbH - Type: SP160AD - for a maximum of 160kg of dough or for a maximum of 100kg of flour - With 2 timers, automatic for slow and fast gear - Automatic switching on and off via clocks - With flour dust cover - 2 speeds (gears), slow and fast - Boiler locking via pliers operated with hydraulics - with 2 stainless steel vats - Suitable for almost all doughs - Robust and strong - Tub capacity 260 liters

L+Z Lathe WEILER Praktikant 160 – Partially Overhauled Machine in very good used condition – delivery on order, delivery time by arrangement! ✅ Technical data Year of construction: approx. 1990 Digital Display: 3-Axis (NEW) Max. turning diameter over bed: approx. Ø 320 mm Max. turning diameter via support: approx. Ø 198 mm Max. turning length: approx. 650 mm Bar passage: approx. Ø 40 mm Spindle speed: 96 – 2500 rpm Spindle nose: A 2 - 5 Drive power: approx. 2.2 kW Threading: Metric, Inch, DP, Module Tailstock: MK 3 Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg ✅ Accessories 3-jaw chuck 160 mm (NEW) Quick-change steel holder + 1 insert Electric Lining Guard (NEW) Work light (NEW) Complete machine documentation Emergency stop Various tension wrenches Coolant Setup L+Z Spindle  ...

Grinder Laska -Type: WW 160 1 -Power: 27 kW -Throat diameter: 160 mm -With loading -With technical documentation -Knife and sieve set -Made of stainless steel -Hydraulic screw extension -Power supply: 400V 50Hz 3Ph -Dimensions with loading: 2600 x 2150 x 2880 mm -Condition: Used in very good condition, overhauled, ready to work

Transnorm spiral helix belt curve conveyor right 90°-750-650 IR1200 RA2437 Technical data: Frame width (NB): 750 mm belt width (GuB): 650 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 200 mm / 90° = 800 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,35-1,21 Drive: SEW gear motor with movi-mot frequency converter for stepless speedcontroll Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive angle: 90° scope of delivery: including Movimot frequency converter KW: 0,55/S1 Construction year: 2001 B ...

Grinder Meissner -Type: SR 160/2 -Power: 18/25 kW -Throat diameter: 160 mm -Number of main screw speeds: 2 -Number of feed screw speeds: 2 (speed control via inverter) -Including loading for 200L trolleys -Dimensions with loading: 2500 x 1900 x 2720 mm -Throat made of brass -Machine made of stainless and acid-resistant steel -Power supply: 400V 50Hz 3N -Condition: used in very good condition, ready to work

RÖCHER conversion 1991 (formerly SCHÖN) Pressure capacity 1,600 kN Plunger stroke160 mm Table dimensions 850 x 650 mm Light barrier control next due exam February 26 Tenon clamp lock in the ram Express lowering speed 274 mm/s Working speed 20/10 mm/s Return speed 273 mm/s Drive power 30 kW Operating voltage 380 volts/50 Hz Fuse max. 100 A

pressure: 160 t chamfer lenght: 3000 mm distance between columns: 2650 mm Control: Cybelec DNC 800 total power requirement: kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working diameter: 140 mm turning diameter: 185 mm workpiece length: 120 mm control: Siemens turning speeds: 7.000 U/min Vertical Turning Machine | FAMAR - BISUB 160 2G The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: BISUB1602G | BISUB160 2G | BISUB-160 2G The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Construction: 4-column frame with slip ring, applicator for applying cover films Capacity : 45 pallets/h Equipment : Ring winder with 1 film roll Control : Siemens S7

Manufacturer: AIDA Type: NC2-160 Thrust: 160t Year of construction: approx. 1991 Stroke length: 130 mm Distance above the table: (adjustable) 235–335 mm Table: 2030 x 600 mm Plunger: 1500x600mm Electrical power: 3x200V(), 15kW - Japanese standard Net weight: 19000 kg Size: 2140 x 2210 x 3175 mm Fobmeu D Ad Ejrcu Idepb Automatic lubrication system. Automatic Cutting Oil Dosing – RAZIOL EST-02 Optionally with disc winder and straightener.

The machine is ideal for short lengths (30, 50 or 100m) either in full width, or you can also divide into different widths, from a maximum of 1600 mm. Thanks to the 4 take-up shafts, the machinist is able to unload and position a new sleeve while the machine is still winding. This brings an enormous amount of extra power at the end of the day, as there are only short downtimes. The machine is still in daily use and sample materials can be tested daily. We would then disassemble the machine, pack it and put it on a stable pallet. 20ft containers can be loaded via the ramp.

Features of the facility 1. Chain conveyor belt 2 meters long (other lengths possible on request) 2. Adjustable bag former 3. Single Film Loader + Automatic Film Centering Device 4. Final sealing unit rotative, double-sealing jaw 5. Solid, medium fin sealing structure 6. Three servo control drives 7. HMI Control Panel 8. Two individual temperature controllers 9. 304 stainless steel body 10. Documentation in local language 11. Print mark control 12. Bag length programmable 13. Standard walking direction left to right Technical Parameters 1. Product length: L90-300mm 2. Product width: W30-160mm 3. Product height: H5-55mm 4. Packaging speed: up to 125 products/min (depending on product, bag length, material and number of sealing jaws) 5. Maximum film width: 370mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: about 6.5kw 8. Machine weight: ...

Inv. Num. : 8913 Type: IRB 1600/1.45-8/M200 Producer: ABB Created: 2013 Parameters: Maximum arm reach: 1450 mm Number of axles: 6 pieces Maximum load capacity: 8 kg Machine weight: 250 kg

This 3-axis SPINNER MVC 1600-N was manufactured in 2016. Ideal for precision machining, this vertical machining centre ensures reliable performance and durability. Consider the opportunity to buy this SPINNER MVC 1600-N vertical machining centre. Contact us for more information.

This stamping machine was manufactured in 1992. It features a robust Eccentric H-frame, monoblock design with a press force of 1600 kN and a fixed stroke of 160 mm. The machine includes a magnetic conveyor for scraps, a quick die cart system, and a millutensil oiling system.It is possible to purchase only the press or only the line/peripheral equipment, with the price split as follows: the press represents 55% of the total value and the peripheral equipment 45%. Ideal for high-quality stamping capabilities, consider the RAVNE PRESSES Manzoni 160 machine we have for sale. Contact us for more information about this machine.

This Dunkes HZS 160 Bending machine was manufactured in the year 2008 and has 2250 production hours. The machine is in good condition and well maintained.

This AMT AHDR 500/1600 was manufactured in 2018. It features a coil diameter of 1600 mm and a spreading range of 250–650 mm, powered by dual 0.75 kW reel drives. With a total weight of 1200 kg and a through height of 1200 mm, its in excellent, like-new condition with zero operating hours. Contact us for more information about this machine.

This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information.

This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.

This STAUBLI TX2-160 LHE was manufactured in 2023. A robust robot arm, ideal for precise and efficient automation tasks. Contact us for more information about this machine.

This DAEWOO Puma 160 was manufactured in 2004. A robust horizontal turning machine featuring a Fanuc 0i-T control system, it supports a turning diameter up to 160 mm and a length up to 250 mm. With a spindle speed of up to 6000 rpm and a main motor power of 11.1 kW, its ideal for precise operations. Machine weight ranges from 3,000 to 3,500 kg. Contact us for more information about this machine.

This BLEMAS EURO 160 press brake was manufactured in 1993. It features a press force of 160t and a bending length of 3m. The stand passage is approximately 2.5m, and it is equipped with a Cybelec control system. The machine is ready for immediate use, with cylinders that have been re-honed and sealed. Contact us for more information about this machine.