160 kva used for sale

rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, dividing head with: three-jaw chuck -Type: UTA 160 N -Three-jaw chuck: Röhm Ø 200 mm -Spindle bore: Ø 38 mm -Dimensions total: 625/580/H285 mm -Weight: 122 kg

Bridge crane, indoor crane, disc brake, crane brake, disc, drum and storm brakes, overhead crane brake, brake ring, conical brake disc -Manufacturer: Demag, brake ring conical brake disc unused -Type: 089 746 84 KB 160 RIW -Dimensions: see photos -Dimensions: Ø 275 x 40 mm -Weight: 1.0 kg

Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Feed flange: mounting flange -Outside: Ø 160 mm -Recess: Ø 130 mm -Hole: Ø 25 mm -Bolt circle: Ø 139 x 10 mm -Dimensions: Ø 160 x 40 mm -Weight: 2.6 kg

Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: OMP 160 151-0025 6 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 1x unit available -Dimensions: 225/130/H120 mm -Weight: 7.5 kg

Conveyor belt rollers, transport rollers, roller conveyor, carrying rollers, roller block -Roller block: with 4 polyamide rollers, diameter 32 mm -Rollers: 4x Ø 75 x 40 mm -Transport width: 160 mm, adjustable, see photos -Shaft: Ø 25 mm, supported on both sides -Dimensions: 350/75/H130 mm -Weight: 6.2 kg

Square, locksmith square, hair square, precision hair square -Angle stop: Leg length 250 x 160 mm -Quantity: 1x angle stop available -Dimensions: 255/160/H22 mm -Weight: 0.5 kg

Hydraulic vise, machine vise, NC compact clamp -Handover in its current condition as inspected The vise has no spindle and is therefore sold as a source of spare parts. -4x clamping jaws: 200 x 60 mm -2x clamping jaws: 160 x 50 mm -Dimensions: 530/160/H165 mm -Weight: 104 kg

electric motor, three-phase motor -Power: 13/17 kW -Speed: 1470/2950 rpm -Shaft: Ø 42 mm -Design: B5 -Protection class: IP 54 -Dimensions: 620/350/H400 mm -Number: 3x motors available Price: per piece -Weight: 130 kg

Bending tool, die, upper blade, top tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Dimensions: 20 x 160 mm -Recording: 35 x 31 mm -Length: 2680 mm -Weight: 110 kg

Steel holder, clamping plate with T-slot -Tool height: max. 45 mm -Dimensions: 260/160/H220 mm -Weight: 26 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 150 mm -Clamping depth: max. 160 mm -Dimensions: 500/270/H170 mm -Weight: 40 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 190 mm -Clamping depth: max. 160 mm -Dimensions: 630/200/H160 mm -Weight: 55 kg

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Baking: soft -Mouth size: Ø 200 mm -Weight: 22 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 160 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 18 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -without interchangeable jaws: without -Weight: 4 kg

Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Holes diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting -Weight: 65 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 160 mm -Number of teeth: 10 - Carbide indexable inserts: 16 mm -Recording: SK50 -Weight: 14 kg

end mill, end mill, milling cutter -Outer diameter: 160 mm -Teeth: 16 -needs to be reground -Weight: 10 kg

Rolling jaws, floating center jaws, low-profile jaws -Dimensions: 160/31/H63 mm -Weight: 3 kg

Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder -Type: SNGB-160 TN34547 -Quantity: 2 pieces available -Price: per piece -Weight: 3.3 kg/piece

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler -Heat exchanger: Oil cooler, shell and tube heat exchanger -Connections/Dimensions: see photos -Dimensions: 1005/1600/H110 mm -Weight: 13.5 kg

Drawbar head, control unit, operating lever, joystick, drive switch, single-axis joystick, spur gear drive, multi-axis controller -Manufacturer: Gessmann, Joystick Multi Axis Controller -Type: 0208873 EP/160 -Quantity: 1x Joystick available -Dimensions: 83/83/H165 mm -Weight: 0.6 kg

TIMAC TZZ-1604 circular disc shear/cutter with automatic double station stacker. Year 2018 Reviewed, ready for production. Automatic circular cutter for disc production from coil or strip, equipped with a double station automatic stacker that allows continuous work without stops. Especially suitable for the manufacture of bottoms and lids, circular pieces and blanks for drawing or stamping processes. Key features -Circular cutting using adjustable blades -Diameter adjustment system for different disc formats -Automatic double station stacker -Suction cup arm for collecting each disc -Possibility to remove entire stacks without stopping production -Doors with latches and safety interlocks -Integrated electrical and pneumatic system -Independent electrical panel -PLC control -Safety in accordance with CE regulations Main technical data -Sheet thickness: -Up to 3mm (car ...

ON 17.12.25, A FULL AUDIT OF THE MACHINE WAS CARRIED OUT BY THE MANUFACTURER'S SERVICE Report available WORKING HOURS: 80H (START-UP ONLY) PRICE OF A NEW MACHINE: 7,500,000 EURO • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 •Year of manufacture: 2020/ first commissioning year 2021 • Last operation: 2022 Specifications • Working width: 1600 mm • Suitable material: Polypropylene (PP), MFI 230 /2.16 > 400 g/10 min • Capacity: Up to 65 kg/h per meter of width • Product weight: 10-80 g/m² • Production speed: 5-80m/min • Nozzle head: MB 1600, 50 h/inch • Extruder: RT-1101-1-100, L/D 30 • Rotary beam heating power: 65-172 kW • Winding station: contact winding machine with automatic coil change • Maximum winding diameter: 1250 mm • Web width: 1700 mm • Winding tens ...

ZTS KOSICE LEK 160 eccentric press was built in 1984 in Czechoslovakia by Závody Tažkého Strojárstva n.p. Košice. The machine is used in cold metal forming. It is capable of performing operations such as precise punching, stamping and bending. All these machining processes are performed with a high press force of 160 tonnes, which, combined with a very dynamic slider, guarantees the best machining results. The slider makes between 32 and 50 strokes per minute and its stroke is adjustable in the range from 25 mm to 160 mm. The ZTS KOSICE LEK 160 is also distinguished by its very rigid C-shaped design, which offers excellent process stability during even the most intensive challenges. The work table with a length of 1000 mm and a width of 740 mm enables mounting of both larger workpieces and tools. All this makes the offered LEK 160 eccentric press an excellent choice for the producti ...

Used Hydr. Adira press brake with CNC controlled crowning WILA Scope of delivery: without tools LazerSafe Security System/CE Foot pedal Two front support arms 500mm, movable Table crowning: WILA motorized Special features: patented HEXA-C frame: low-torsion and therefore very accurate Hydraulics in semi-hybrid equipment very energy-saving because the engine is in the Idle only runs at 5Hz The bounce during start-up and descent is controlled by two high-precision servo valves Two linear encoders ensure accurate positioning of the press beam Adjustable guide of the press beam made of self-lubricating material Electrics and hydraulics with surge protection X&R axis run on backlash-free ball screws driven by servo motors 2 manual stop fingers Z axis Machine rear secured with light barrier AD 60 CNC control type Adcontrol 2 D Machine is repaired, check ...

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 35 mm -Groove: 20 x 60 mm -Dimensions: 275/160/H308 mm -Weight: 28.6 kg

electric motor, three-phase motor -Engine: unused -Power: 18.5 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Design: B3/B5 -Protection class: IP 55 -Quantity: 9 pieces available -Price: per piece -Weight: 110 kg/piece

Internal micrometer, internal measuring instrument, internal dial gauge, internal micrometer screws, micrometer screw, internal diameter, internal micrometer, cylinder gauge -Measuring range: 160-295 mm -Dimensions: 200/485/H135 mm -Weight 4 kg

PART NUMBER 7948 Specifications: - track width 400mm - shaft working width 400mm - max disc diameter (350mm fitted) 450mm - blade bore diameter 70mm - max cutting height (with a blade of 450mm) 160mm - Table top width with widening 710mm - table top length 1900mm -in advance: - 2-row ratchets/flasks - Slip roller, metal, pressure roller - Ratchets/Fluffers - Slip roller, metal, pressure roller - shaft with saws - Smooth, metal, sliding roller -from the bottom: - guide strip - latches - Caterpillar - Electric body lift - central track lubrication - 2 types of feed speed + smooth - total power 32kW - overall dimensions l/w/h 2050x1800x1530mm - weight about 2000kg ADVANTAGES: – Italian production – very good condition – DTR documentation – used multi-saw Net price: 48900 PLN Net price: 11643 EUR depending on the price 4.20 EUR (Prices may c ...

NUMER KATALOGOWY 7903 Dane techniczne: - szerokość gąsienicy 450mm - szerokość wału 420mm - założona tarcza 400mm - max średnica tarczy 450mm - średnica otworu tarczy 80mm - max wysokość cięcia przy tarczy 450mm 160mm - wymiar blatu 2230x860mm – z góry - odrzutniki/zapadki - wał poślizgowy - odrzutniki - rolka gładka, poślizgowa - docisk - wał z piłami - docisk - 2 wały poślizgowe, dociskowe – z dołu - rolka przed blatem - prowadnica - zapadki - gąsienica - centralne smarowanie gąsienicy - manualne podnoszenie wału z piłami - elektryczne podnoszenie korpusu 0,75kW - płynna regulacja prędkości posuwu + - średnica króćca odciągu 280mm - silnik główny 75kW - wymiary całkowite dł/szer/wys 2360x200x1960mm - waga 3250kg ATUTY – produkcji czeskiej – wielopiła używana – górny pulpit sterując ...

NUMER KATALOGOWY 7904 Dane techniczne: - max wysokość cięcia 160mm - max szerokość elementu 700mm - szerokość robocza wału z piłami 600mm - średnica wału 70mm - max średnica piły 450mm - z góry: - zapadki - 2 wały ciągnące, zębate - docisk z rolka metalową poślizgową - z dołu: - rolka poślizgowa - zapadki - wał ciągnący zębaty - wał z piłami - wał ciągnący, gładki - rolka poślizgowa metalowa - płynna regulacja prędkości posuwu - silnik posuwu 1,5kW - silnik główny 55kW - wymiary całkowite dł/szer/wys 1700x1400x1900mm - waga około 2740kg ATUTY – produkcji polskiej – solidna konstrukcja – maszyna używana, stan bardzo dobry Cena netto: 56900 PLN Cena netto: 13548 EUR w zależności od ceny 4,20 EUR (Ceny mogą się zmieniać wraz z wyższymi wahaniami)

Engine Brand: VOLVO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 128 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 160 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 230.9 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/volvo-td710g-generator-160kva- used/389, , = More information =, , Empty weight: 2.030 kg, Type number: TD710G GENERATOR 160KVA

Incubator New Manufacturer: Binder Type CB 160 – CO2 Incubator • Incubator Type: CO2 Incubator • Cabinet Type: Incubator • Maximum load: 11 - 50 kg • Internal volume: 150 litres • Maximum temperature: +60 °C • External dimensions: 680 mm (width) x 920 mm (height) x 715 mm (depth) • Internal dimensions: 500 mm (width) x 600 mm (height) x 500 mm (depth) • Temperature range: 7 °C above room temperature to 60 °C • Temperature deviation at 37 °C: ±0.3 K (spatial), ±0.1 K (temporal) • Recovery time after 30 seconds door opening at 37 °C: 4 minutes • Humidity range: 90-95% relative humidity • CO2 range: 0-20 vol.-% • Setting accuracy CO2: 0.1 vol.-% • Recovery time after 30 seconds of door opening at 5% CO2 by volume: 7 minutes • CO2 measurement: infrared (IR) • Nominal voltage: 230 V (50/60 Hz) or 115 V (60 Hz) • Nominal power: 1. ...

• Reference ID: PP-59393 • Category: Flexo Printer • Manufacturer: Bobst • Model: SPO 1600 / Flexo 160 • Year Built: 1988 • Colors: 2 • Speed: 6,000 sheets/hour • Max. size: 1,600 x 1,100 mm • Min. size: 600 x 520 mm • Condition: Good • Location: Europe • Availability: Immediately Machine Description: • SERCO Feedmaster Prefeeder • BOBST Flexo 160 – 2 Colour Printing Units • Conveyor • BOBST Autoboard SPO 1600 Die Cutter Technical Specifications: • Maximum Sheet Size: 1,600 x 1,100 mm • Minimum Sheet Size: 600 x 520 mm • Maximum Cutting Force: 400 Tons / 4 MN • Maximum Speed: Up to 6,000 Sheets/Hour • Suitable for Corrugated Board Production • Heavy-Duty Swiss Construction • The equipment is currently installed and in production, allowing inspection under power and production testing.

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector -Manufacturer: wöhner, fuse-switch disconnector, 160 A, unused, original packaging -Type: LTS-00 -Quantity: 1x load break switch available -Carton dimensions: 200/105/H125 mm -Weight: 1.3 kg

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector, fuse-switch disconnector -Manufacturer: Weber Silas, fuse-switch disconnector, circuit breaker 160 A -Type: STL-00 -Number: 2x load break switches available -Price: per piece -Dimensions: 190/105/H80 mm -Weight: 0.6 kg/piece

DECKEL MAHO DMU 160P duoBLOCK CNC Machining Center TECHNICAL FEATURES: Year: 2008 CNC Type: HEIDENHAIN TNC 530 Number of continuous axes: 5 X-axis stroke: 1600 [mm] Y-axis travel: 1250 [mm] Z-axis travel: 1000 [mm] X, Y and Z axis travel speed: 15000 [mm/min] Fast travel speed X, Y and Z: 60000 [mm/min] Table dimensions: Ø1500 x 1250 [mm] Maximum weight Tabletop Allowable: 4000 [Kg] Pin attachment: SK 40 (DIN 69871) Minimum speed. Spindle: 20 [rpm] Maximum speed Spindle: 12000 [rpm] Number of tool magazine stations: 60 Machine weight: 35000 [Kg] EQUIPMENT INCLUDED: x1 HEIDENHAIN workpiece probe x1 Laser Gauge x3 HEIDENHAIN measuring rulers on the X, Y and Z axes x1 Watering Center Spindle x1 Chip Conveyor x1 Paper Filtration Unit More information on request.

Engine Brand: DAF, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Turbo Type: None Mounted , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 116 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 160 , Generator Hz: 50 , Generator Volts: 380/220 , Generator Amps: 243 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/daf-dk1160mg-generator-160kva- used/321, , = More information =, , Empty weight: 1.760 kg, Type number: DK1160MG GENERATOR 160KVA

used very little (max 4000 hours) and are in excellent condition. ORC turbine of 160 kW electrical and about 700 kW thermal, Since 2001, Triogen has been developing and manufacturing systems for conversion Organic Rankine Cycle (ORC) energy conversion systems. The generator TRIOGEN ORC, which has been used in various application areas since since 2005, is similar to a steam cycle, but uses a fluid organic instead of water. Compared with steam, it allows to achieve better performance and efficiencies by exploiting sources of low-temperature heat. The Triogen ORC generator is suitable for the conversion of heat from: + Natural gas engines + Biogas engines + Landfill gas engines + Biomass + Biodiesel engines + Diesel engines + Gas from flares + Gas turbines + Process heat + Furnace heat + Any heat source >350 °C 165 kWe DI ELECTRICITY WITHOUT FUEL AND EMISSION-FREE  ...

Dematic conveyor system roller conveyors 16000-600-540 RA2340 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of manufacture: unknown Available conveyor lengths (FL): 16000 mm Stowage space size: 750 mm Nominal/outer width (NB): 600 mm Condition: good (used) Roller width (RB): 540 mm Roller pitch: 125 mm variable Drive types: SEW geared motor Weight of conveyed goods: up to 30 kg Stowage mechanism: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g: additional elements to expandable frequency converter supports lateral guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric  ...

Specifications: Working length: 1600 mm Pressing force: 32 tons CNC Control: TS1 2D Simulation Touch Screen Controlled axes: Y1/Y2; X Mot. adjustable back gauge Stroke: 215 mm servo-electric drive Crowning Tool clamping: WILA system Working height: 910 mm Motor power : 6 kW Dimensions (length x width x height): approx. 2000 x 1900 x 2100 mm Weight: approx. 3,3 tons Accessories: 1 set of new tools

Granit marble Length: 1510 mm Width: 1005 mm Thickness: 160 mm Height on feet: 1015 mm Weight: approx 0,5 T

power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: 180 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2000 mm turning diameter over slide rest: 1600 mm turning length: 10000 mm control: FANUC 0i TF workpiece weight: 25 t steady: 4 feed: 1 - 3000 mm/min main drive: 60 kW main spindle speeds:: 1,5 - 160 U/min bed width: 1150 mm faceplate: 1600 mm tail stock: tailstock quill diameter: 260 mm total power requirement: 110 kW weight of the machine ca.: 120 t the machine is currently being overhauled and equipped with - new electrics (Siemens, Schneider, cabinet) - CNC control FANUC 0i TF - new Fanuc motors - new hydraulic parts - complete mechanical overhaul - Ball screw (B-axis) - bed overhaul - three-track bed - Grinding device 1500 rpm - Milling Unit - Face plate with 4 jaws - 3 steady rests - incl 1 year warranty from overhauler on electrical and hydraulic components and 2 years on FANUC CNC Completion of overhaul after order (approx. 2 months) The data for th ...

Batch Mixer, Ploughshare Batch Mixer, 1600l Capacity, 22kw

max. wheel diameter: 160,175 mm gear width: 355 mm max. module: 4,5 spindle bore: 75 mm centre distance: 410 mm min. number of teeth: 2, 3 cutter diameter max.: 115 mm cutter length max.: 105 mm axis distance between cutter and workpiece - max.: 138 mm axis distance between cutter and workpiece - min.: 30 mm milling head -swivable: 120 ° milling spindle speeds: 70 - 400 U/min axial-feeds: 0,25 - 4,0 mm/U radial feeds: 0,09 - 1,5 mm/U total power requirement: ca. 9,5 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stainless steel pump body + pump impeller, 40-160, Lowara, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. Scope of delivery: 1 piece stainless steel pump impeller, SH/FH 40 D171 S2, 150784350, second-hand top, original price € 448 excl. 1 piece stainless steel pump body, CRP SH40-160 DIN-JIS, 151380090, second-hand top, original price € 1025 excl. VAT, pump body, cover motor side, cover suction side + connection. Seals mostly present, screws missing. Bellhousing and pump mounting bracket (blue) free of charge Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the ...

Transnorm curved belt conveyor right 160°-780-600-IR600 RA2018 Technical data: Manufacturer: Transnorm Year of manufacture: 1996 Condition: broken belt Motor: will be changed conveying angle: 160° nominal/external width (NB): 780 mm belt width (GB): 600 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: please contact Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1996 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 160° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 scope of del ...