15 mw used for sale

Equipped with: Double contact grill, automatic control, three-phase current, Auction-ID: A1-40105-78

(1x) Exhaust roller conveyor L 6150 x W 2350 x H 450mm, (1x) roller conveyor L 2150 x W 2350 x H 450mm. Standing height landing: 1700mm. Auction-ID: A1-43429-15

Consisting of: (1x) chain turning station L 5800 x W 2600 x H 1600mm, (1x) forming conveyor L 5800, Working width: 250mm, (1x) platform L 8500 x W 1400 x H 1620mm, (1x) Böhl Wrapping machine, Junior S 350 VA (1997), (1x) discharge conveyor, L 7150 x W 2500 x H 1350mm. Includes: (3x) pallets with wrapping film. Auction-ID: A1-43429-14

Wood length 600 cm including chain transport; tilter; chain transport with sorting key; stacker with elevator; stacking slats warehouse; Total set-up Dimensions approx. 22 x 10 meters; Roller conveyor length 13 mtr Auction-ID: A1-43429-87

Combined Cycle CHP Power Plant 12.5 MWe + 1.6 MW Chilled Water This combined cycle CHP plant consists of one Dual Fuel Solar Turbine Mars 100 with 40 bar steam boiler, Siemens SST 060 Back Pressure Steam Turbine and one Double Acting LS Absorption Chiller with electrical, mechanical and control auxiliaries. Plant is maintained according to manufacturer’s instruction. Gas turbine engine was changed to Solar refurbished unit in June 2023 and it has accumulated only about 16000 hours since that. Both the gas turbine and the steam turbine were last overhauled by OEM service in mid-2025 and thus equipment is in good operational condition. This combined cycle CHP (trigeneration) plant delivers 10 MWe of primary electrical output from a Solar Turbines Mars 100 dual-fuel gas turbine, with an additional 2.5 MWe from a Siemens SST 060 back-pressure steam turbine and 1.6 MWth of chilled w ...

max 3500 PSI, 7 hp petrol engine, unused Auction-ID: A1-40418-94

The frame and the formwork is in a used good condition and can be used immediately. 26x Framax 1.35x2.70m 10x Framax 0.90x2.70m 6x Framax 0.60x2.70m 4x Framax 0.45x2.70m 4x Framax 0.30x2.70m 4x Framax 0.90x2.70m Uni 4x Framax inner corner 2.70m 2x Framax outer corner 2,70, 120x Framax RU Clamp 10x Framax Uni Spanner 10x Framax Universal Connector 10-16cm 12x Framax clamping clamp 4x Framax clamping rail 0.90m 2x Framax clamping rail 1.50m 1x Framax conversion bracket Other quantities or elements are available on request. Frame formwork Framax The high-performance steel frame formwork for large-area shelling with the crane Framax is the frame formwork system that achieves a consistent 15 cm grid with only a few elements, whether used standing or lying. All fasteners, all accessories blend seamlessly into the grid for fast formwork times and high cost-effectiveness ...

div. Pallet transport Chains/rolls for Düdo pallets and Euro-industry pallets Unit price: from 700,00 € with drive

Special items deep drawing film Under film white 150 my 432 mm wide 40 rolls a. 500 lfm. = 20,000 lfm Upper foil white 70 my 415 mm wide 40 rolls a. 500 lfm. = 20,000 lfm Roller core: 76 mm suitable for feta cheese packaging or similar Prices on request

FOR SALE .. WESTFALIA GEA BILGE MASTER 1500 COMPLATE SYSTEM YOB 2007 AT TURKEY ... HAVE A GDY SIR; WE VE COMPLETE SYSTEM WESTFALIA GEA BILGE MASTER 1500 AT STOCK. PLS FIND DETAILS OF SYSTEM. — BILGE MASTER 1500 YOB 2007 SER NO 9017-909 IMO CERTIFICATE 330 238 / MEPC 107 (49) — BILGE WATER CENTRIFUGE GEA WSD8 01 037 YOB 2007 S No 9039 654 —OIL MONITOR OMD 2005 —COMPLETE WESTFALIA CONTROL PANEL --GEA FILTER AF 300 YOB 2006 -- FEED PUMP IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Cat-Nr. 09-2090 new cubic Standard Features: • Outer Dimensions: 1050 x 1050 mm • Height Body Tank: approx. 1550 mm • Height Tank incl. Feet: 2000 mm • Material AISI 304 – Material Thickness: Tank 1,5 mm / Feet 2,5 mm / Hooks for Transport 2,5 mm • Weight: 154 kg • Volume: 1500 Liter • Manhole on the Top 400 mm - Lid with 4 Screws and Clamps with Bunging NW 50 (as per Photo below) • Bottom in Symmetrical Shape • Outlet Discharge DN 65 • Reinforcement 150 mm in each Corner of the Tank • Surface: outside marbled – inside IIID • stackable – 3 in empty, 2 in full • transport possible with Hand-Lift or Fork-Lift Surcharges / unit (upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing Unit NW 65/40 or 65/50 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-909052 ...

with 15 cards + Rack S5 187U with 10 extension cards. Scope of supply shown on the picture.

56 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -Stand 57 / 112 traverses -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 450 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial customers from EU c ...

Storage Tanks / Pressure Tanks / Beer Tanks in V2A with cooling jacket Test pressure: 2,86 bar, Operating pressure: 2 bar Volume: 1500 Litres -NEW- Measurment and Weight: Total Height: 2609 mm Cyl. Height: 1500 mm Diameter: 1100 mm Weight: 290 kg Material: V2A (AISI 304) 1.4301 Upper bottom: • with manhole Ø 400 mm with 4 x screw • with 2 eyelets • with ventilation system DN 50 • with CIP-cleaning • with downward drawn filling pipe DN 32 with fermentation connector with overpressure valve, with manometer (on extra charge) Tank cylinder: • with ladder hook up • with cooling jacket h=1000 mm • with sample valve DN 15 (on extra charge, with spiral in stainless steel also available) • with immersion socket for temperature indicator and temperature indicator (on extra charge) • on the back of the t ...

Stainless steel agitator container 150 l. with screw quirl, for the disconnection and mixing of solids and liquids before grinding, injection etc., incl. drive 3.6 kW via gear motor, lid with sight glass, stirring shaft with propeller (200 mm , with oxide ceramic coating). Very good condition.

Colmec Italy 150mm dia coldfeed extruder, roller feed - 200mm wide, Screw length 2000mm, L/D ratio 13:1, with simple Spaghetti die/cutter assembly, jacketed barrel and cored screw for temperature regulation (no TCU's included). with 100HP, 1750rpm, 575V, 3ph, 60Hz AC motor (ex Canada) and controls. Fabricated bedplate. Screw height: 620mm. In very good condition.

100 lfm shelf shepherd type R3000 Ne- and used goods, see pictures Height 2.5 m Depth 40 cm Load/fold 150 kg Field width 128 cm Negotiation price: € 6,220,-- net from stock Offer consists of: 78 pcs stand or frame, 2.5 m, galvanized new 462 pcs. shelves, 150 kg load/compartment, galvanized used 26 St. Cross Associations for Stiffening 6 levels per field (several are of course possible at an extra cost) Field width also available in 100 cm! Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or ...

25 lfm shelf shepherd type R3000 Ne- and used goods, see pictures Height 2.5 m Depth 40 cm Load/fold 150 kg Field width 128 cm Negotiation price: € 1,560,-- net from stock Offer consists of: 20 pcs stand or frame, 2.5 m, galvanized new 114 pcs. shelves, 150 kg load/compartment, galvanized used 7 St. Cross Associations for Stiffening 6 levels per field (several are of course possible at an extra cost) Field width also available in 100 cm! Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or o ...

Surface disinfectant ready-to-use solution (ethanol- / isoporpanol-based) in 5L canisters for surfaces - Eliminates 99.9% of bacteria, fungi, germs and special viruses (H1N1,H5N1, Grippale Infections, Influenza, COVID-19 and Diarrhea) Technical data: Container: 5L canister Pieces: 300 Origin: Germany Smell: alcoholic (without addition of fragrances and dyes) Colour: clear-transparent Density at 20 degrees: 0.90 g/cm3 Water solubility: easily soluble Ph value: 7-8 UN number: UN1993 Active ingredient content per 100g product: 55g ethanol & 16g 2-propanol Registered and approved quality product from Germany. Opinion on the efficacy of the disinfectant in Sars-CoV-2 infections: Based on the VAH publication of 12.03.2020 "Notes on the efficacy and manufacture of disinfectants from 2-propanol and ethanol based on the general decree of BAUA against the background of the ...

Glass scale by Heidenhain Type LS303 LS603 LS703 Only types and lengths listed below are available. 1 x ML 1020mm LS703 1 x ML 1740mm LS703 1 x ML 1140mm LS603 1 x ML 220mm LS303 1 x ML 370mm LS303 Price on request Special price

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Simatic S7-1500, inkl. Memory card, 6ES7 515-2UM01-0AB0, Siemens, mint condition -40% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Simatic S7-1500, 6ES7 515-2UM01-0AB0, Siemens, - incl. wall bracket - incl. Simatic S7 memory card, 256Mb, 6ES7954-8LL03-0AA0, Siemens, new price € 397 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions  ...

approx. 1500 m2 steel construction stage 1-storey Used goods, good condition, see pictures Manufacturer STOW Length approx. 58.5 m Width approx. 54.6 m Height lower edge 3.4 m Height top edge 3.7 m Load 500 kg/m2 C-Profiles and Sigma Profile Design fastened with screws and nut Grid distances adjustable in length Floor structure is 38 mm chipboard, highly compacted, groove and spring Underside white, top grey coated Negotiation price: Offer on request! Partial sale possible! Disassembled and loaded Goods are in stock. Transport costs possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from s ...

Attachment: eccentric screw pump Manufacturer: Seepex Type: BN 1-12 Machine number: 176411 Year of construction: 2005 Capacity: 150-2200 l / h Pressure: 2 bar Speed: 1400 RPM Inlet connection: DN 50 Port side: DN 50 Length: 1200 mm Condition: used, ready

Attachment: eccentric screw pump Manufacturer: Netzsch Type: NM031BY Machine number: 321637 Year of construction: 2001 Power: 90-1500 l / h Speed: 24-400 rpm. Pressure: 0-16 BAR Motor: 1,5 kW, 400 V North, Connection suction side: DN 70 Port side: DN 70 Length: 1700 mm Condition: used, ready

Frequency inverter, 15KW, tested, max 2935 load hours, VLT FC-302P15KT5E20H1XG… Danfoss, used Top Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Frequency inverter Danfoss 15 KW, VLT FC-302P15KT5E20H1XGXXXXXSXXXXA0BXCXXXXD0 - Input: 3x380-500V, 50/60Hz, 29/25A - Output; 3x0-Vin, 0-590Hz, 32/27A - The frequency converters have been tested and only have between 1580 and max. 2935 load hours. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any def ...

Post welding wire and electrodes approx. 1,000kg New, unused, original packaged. Posten Welding accessories consisting of Welding dredging roller for inert gas welding machine MIG MAG Predominantly welding wire diameter 1.2mm, per roll 15kg z.B. Union A 600 IG Various electrodes e.B. Nickel A Originally packed in a cardboard box and sealed by welding in kunsstof film. Special price

4X RESERVE KNIFE FOR WOHLENBERG 155 Format (cm): 155 1x brand new / unused

ELECTROLUC 150 + 50 LIT ID.NO. 2105 Electrolux 150 + 50 liter cooking pots electrically heated with automatic tipping. Year of courage 2010 very fine condition previously stood in a school canteen. Dimensions 220 x 110 cm H 185 cm.

silo, bulk material silo, gravel silo, sand silo, storage silo, aggregate silo used Manufacturer: unknown Volume approx. 1500 - 1600 m3 27 individual chambers each approx. 2.2 x 2.2 m (one of them staircase) Silo Material: Steel Square Total dimensions: approx. 20 x 9 x 15 m We have various silos in different sizes made of a large mortar and plaster mixing plant. Of course, also various other components, such as filters, elevators, weighing containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.

Engine A1050024 Motor for BOFA suction systems: Type: AD 500 IQ, AD 1000 IQ , AD 1500 IQ Engine A1050024 MA-201067 New original engine

Hanselifter E-MES150-15-05 Electric Box Lifter Minilift 150kg 0.15 kW 2x12V Excellent maneuverability for tight spaces Electronic height change of the platform Operating terminal for easy handling when lifting and lowering Increased safety thanks to approx. one and a half metre supply cable and an integrated charger with overload protection Charging possible at any standard socket With parking brakes on both swivel castors Dimensions L x W x H: 870 x 600 x 1790 mm Drive type: semi-electric Overall height: 1790 mm Tyres: polyurethane Ground clearance: 70 mm Net weight: 66 kg Fork length: 475 mm Lifting speed: 50 mm/s Lifting height: 1500 mm Load center of gravity: 230 mm Platform height max.: 1500 mm Platform dimensions L x W mm: 475 x 600 mm Wheelbase: 680 mm Load capacity: 150 kg Turning radius: 850 mm You can find more box jacks - new and used - in our shop! ...

The AutoDoor AD150 is a powerful, electrically operated door opener for CNC machines with a stroke of 1500 mm. The system offers an integrated safety function in accordance with EN ISO 13849-1 PL d and does not require external light barriers or safety edges. Thanks to the standard mounting brackets and Harting connectors, the AD100 can be quickly installed and seamlessly integrated into any CNC machine. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrat ...

Simatic S7 1500 CPU, 6ES7 515-2AM01-0AB0, Siemens, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - We assume that the device has never been used, but cannot say for certain. Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for ...

The system has an explosion protection EEx dIIA/IIB-T4 Machine name: Filter dryer / filter pressure groove Manufacturer: Rosemund Type: RLF02-648-91 Year of construction: 1991 Material: Container, heater and stirrer: 1.4435 operating pressure: Container: - 1 / 6 bar heating jacket: - 1 / 6 bar operating temperature: Container: - 50 / +150 °C. Heating jacket: - 50 / +150 °C. Dimensions: length 1650 x width 1170 x height 2400 mm Empty weight: Approx. 2000 kg Tech. Documentation: Yes Remark: Drive hydraulics: 5.5 kW Electric motor: power 5.5, speed 1500 rpm, type V1, protection class IP55 Explosion protection: EEx dIIA/IIB-T4 Accessories: A base frame and a hydraulic system Condition: Used good Price: On request

Geared motor, electric motor, electric geared motor -Engine: FIMEA type LR 63B4 -Gearbox: 150 rpm, with oil level indicator -Power: 0.18 kW -Voltage: 220/380 volts -Hollow shaft: Ø 19/80 mm -Protection rating: IP54 -Dimensions: 165/140/H320 mm -Weight: 7.4 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 90° -Drawing: in the photos -Dimension: 29 x 171 mm -Length: 1570 mm (1x 650/500/420 mm each) -Weight: 41.2 kg

Three-phase motor, electric motor -Handover: in the current state as viewed -Holding foot: damage see pictures -Power: 7.2/12 kW -Speed: 750/1500 rpm -Shaft: Ø 42 x 110 mm -Construction: B3 -Dimensions: 640/310/H370 mm -Weight: 115 kg

Vacuum lifter, vacuum lifting device, vacuum suction device, plate lifter, vacuum lifting frame -Suction surface: Ø 66 mm -Price complete -Quantity: 150 pieces -Dimensions: O 66/29 mm -Weight: 0.03kg / piece

electric motor -Power: 0.37 kW -Speed: 1500 rpm -Shaft diameter: 14 mm -Design: B3 - Protection class: - -Dimensions: 240/186/H175 mm -Weight: 12 kg

Electric motor, three-phase motor -Power: 0.12 kW -Speed: 1500 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Flange: Ø 105 mm -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 245/187/H140 mm -Weight: 6.5 kg

Panel lifting clamp, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper -Sheet metal claw -Wingspan: up to 152 mm -Load capacity: 2500 kg -Number: 1x terminal available -Price: per piece -Weight: 29 kg/piece

Gear motor, electric motor -Speed: 150 rpm -Power: 0.135 kW -Construction: B14 -Shaft diameter: Ø 12 mm -Protection class: -Price: per piece -Number: 4x available -Dimensions: 270/110/H145 mm -Weight: 3.9 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.08 kW -Speed range: 150 rpm -Construction: B14 -Diameter shaft: 12 mm -Price: per piece -Number: 2x available -Dimensions: 270/110/H145 mm -Weight: 3.9 kg

Gear motor, electric motor -Speed: 150 rpm -Power: 0.06 kW -Construction: B3 angle -Diameter hollow shaft: Ø 14 mm -Protection class: IP 54 -Dimensions: 285/120/H165 mm -Weight: 4.1 kg

Gear motor, electric motor, three-phase motor -Speed: 153 rpm -Power: 0.18 kW -Voltage: 220 V -Construction: B3 angle -Shaft diameter: Ø 12 mm -Protection class: IP 44 -Number: 1x engine available -Price: per piece -Dimensions: 290/125/H180 mm -Weight: 5.7 kg

Gear motor, electric motor, electric gear motor -Speed: 152 rpm -Power: 2.9 kW -Diameter shaft: Ø 40 mm -Construction: B5 -Protection class: IP 44 -Brake -Dimensions: 740/300/H280 mm -Weight: 65 kg

Gear motor, electric motor, three-phase motor -Speed: 150 rpm -Power: 0.18 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Brake -Number: 1x engine available -Price: per piece -Dimensions: 500/215/H180 mm -Weight: 26 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 1500 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: - -Dimensions: 380/300/H250 mm -Weight: 38 kg