15 mw used for sale

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11500 € : 220.8 € : 150 to : fix : 300 mm : 1570 mm : 280x200 mm : 5 mm/s : 10 mm/s : 2500 mm : 1000 mm : 2270 mm : 2100 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 20 mm turning diameter over slide rest: 1200 mm turning length: 3.000 mm centre distance: 3000 mm digital readout: 4 - Achsen bed width: 800 mm spindle bore: 122 mm turning speed range: 1,80 - 355 U/min power requirement: 22 kW 3-jaw-chuck diameter: mm taper in tailstock-quill: 100 (1:20) dia. of quill: 150 mm quill stroke: 350 mm coolant: voltage: 400 V total power requirement: 31 kW spindle nose: Gr. 11, DIN 55027 weight of the machine ca.: 10 t dimensions of the machine ca.: 8,20 x 2,20 x 2,20 m - Serial No.: 75.217 - Rapid feed for carriage - 4-Axis DRO-System SINO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 4500 mm swing diameter: 5000 mm turning height: 2500 mm workpiece weight max.: 63 t no. of the slides: 2 max. ram stroke: 1600 mm faceplate turning speed range: 0,3 - 32 U/min Anzahl der Drehzahlstufen: 4 total power requirement: 130 kW weight of the machine ca.: 145 t dimensions of the machine ca.: 6,6 x 11,4 x 8,4 m - DRO - 2 swivable Rams (-15° / +40°) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conrad drill rig, suitable for geothermal drilling., , - Machine manufactured in 2018, - Hours: 5,985, - Maintenance performed by the manufacturer, - Fully documented, - Powered by an IVECO N45 ENT, 4-cylinder , - Manipulator included, - Remotely controllable via remote control, - Pull up: 5000 daN, - Pull down: 3000 daN, - 4 drill head, bore 100mm, - Included with the machine: 32 drill pipes of 3 meters long (96 meters total), , Very neat and well-functioning machine, ready for immediate use!, , Contact us for an excellent offer, , = More information =, , General information, Year of manufacture: Aug 2018, Model year: 2018, Colour: Green, , Technical information, Power: 125 kW (170 HP), Number of cylinders: 4, Engine capacity: 4.500 cc, Type of fuel: Diesel, , Condition, Technical condition: very good, Visual appearance: very good, , Financial information, Price: On request, , Other inf ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 37600 € : 718.16 € : 40 to : 1550 mm : X und Y Achse : 160 mm : 1260 mm : 320 mm : 380 mm : hydraulisch : 90 mm/s : 10 mm/s : 600 mm : 845 mm : 100 mm : 120 l : 5,5 kW : 2000 mm : 1600 mm : 2235 mm : 3450 kg NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms light barriers intermediate pieces for the upper tool clamping die seat and die die seat with 4 V openings split upper tool, slightly cranked, divided pedal user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT: laser safety device Fiessler NC controlled R axis manual crowning table motorized crowning table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 10200 € : 195.84 € : 150 to : fix : 300 mm : 1070 mm : 280x200 mm : 5 mm/s : 10 mm/s : 2050 mm : 1000 mm : 2270 mm : 1870 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 49500 € : 945.45 € : 150 to : fix : 835 mm : 500 mm : 700 mm : 1050 mm : 20 mm/s : 10 mm/s : 3 mm/s : 1000x700 mm : 1000x400 mm : 2200 mm : 1000 mm : 2700 mm : 4100 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the r ...

: neu : ca. 4 Monate ab Auftragse : 1530 mm : 16 mm : 12 mm : 7 1/min : 3 ° : 8 : 500 mm : 22.5 kW : 250 l : 950 mm : 2350 mm : 1400 mm : 2000 mm : 5200 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : 880.52 € : 150 mm : 40 mm : 200 mm : 33 kg [felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper. The machine vice for freely adjustable clamping of the workpiece. Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted. Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpieces Hardened and precision ground clamping jaws No additional clamping devices necessary The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand Reversing 4-Hi Cold Rolling Mill Mfc.: NKMZ, ABB, Grip Engineering, Launer Engineering Built: 1972 Type: Reversible Cold Rolling Mill (Quarto-1800) The cold rolling stand has been modernized by ABB in 1995. The mill was fitted with automatic gauge control (AGC), flatness control unit (AFC), spot cooling system (by Grip Engineering), and work roll changing device (by Launer Engineering). Besides, the mill has been equipped with a horizontal rolling Oil filtration system (by Launer Engineering). Flatness & AGC control: available /1995

: neu : ca. 4 Monate ab Auftragse : Italien : 43200 € : 825.12 € : 150 to : 500 mm : 800x600 mm : 630 mm : 22 mm/s : 3 mm/s : 4 kW : 1800 mm : 1200 mm : 2400 mm : 4500 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USED GAS TURBINE ENGINES 17 UNIT -GOOD CONDITIONS CUMMINS AND

Key data: 15 KW, 400 V

EC Power Gas CHP XRGi 15G-TO Electricity and heat generators, unknown year of manufacture, unknown operating hours, with controller, without buffer memory and q-Network Controller. 15 KWel, 400 V / 50 Hz. Manufacturer: EC Power Model: XRGi 15G-TO Type: Gas CHP Serial Number: 40181104 Power [KWel]: 15 Power [KWth]: 32 Power [KWgas]: 55 Year of manufacture: unknown Operating hours: unknown Weight [kg]: 650 Dimensions LxWxH [m]: 1.40 x 0.80 x 1.30

Overview These 2 isobaric pressure tanks (150 hl each) manufactured by TMCI Padovan in 1994 originate from the wine industry and were previously used for sparkling wine production. Designed with a full cooling jacket and pressure resistance up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated products, including beer, sparkling wine, and similar beverages. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, representing a widely used technology before stainless steel tanks became the industry standard. They offer a cost-efficient alternative to stainless steel vessels, especially for operations with lower investment requirements. Each tank is fully insulated and equipped with a complete cooling jacket, allowing temperature-controlled processing. As with all epoxy-coated vessels, periodic renewal of the internal coa ...

Band width: 150mm; Band length: Table size: Veneer sanding equipment: yes; Oscillation: yes; Swivel table: yes, 0÷ 45Â; Suction port: 120mm; Motor power: 3 kW; Machine length: 1440mm; Machine width: 800mm; Weight: 530kg;

Key data: 1875 mm, 1550 mm, 1345 mm

CNC Vertical Multitasking Machine CNC Control Mazatrol Matrix 2 Turning diameter 2000 mm Turning speed 10-300 R/min Milling head speed 25-5000 R/Min Movement X-Y-X-axis 1875-1550-1345 mm B-axis travel -30/120° C-axis indexing 360/0,0001° Tool taper Capto C8 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Key data: 150 t

DURENDUS 150 T Workshop Press – Single Column Press – 1,250 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can supply you with this machine from stock or manufacture it from scratch – gladly taking into account individual options. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 6.900 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 700 × 1,000 × 100 mm Pressure adjustment Lateral dis ...

Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.

Aircooled chiller/Heat pump GALLETTI MLE144PS2A 137 kW/154 kW Cooling capacity: 137 kW / 38.96 tons (12/7 — 35°C) Heating capacity: 154 kW / 43.79 tons (40/45 —7°C) Year of manufacture: 2025 Options: Heat pump. Hydraulic module. 4-pipe system. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss DSH161A4ALD (scroll, soft starter) Type of refrigerant: R454B Number of fans: 4 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump EBARA 3M40-125/2.2-Q7AE-NEDN Dimensions: 3.8x2.02x1.97 m. Weight: 1795 kg. Working hours: 0/0/0/0 h. Condition: New

A filter system from brewery operations is available. Plate dimensions X/Y: 1000mm/1000mm, filter area: 1m²/plate, number of layers: 86, throughput capacity: 150hl/h, operating pressure: 8bar. The hydraulics were overhauled in 2019. An on-site inspection is possible.

: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 € : 436.8 € : 150 to : fix : 1520 mm : 300 mm : 1520 mm : 610 mm : 9 mm/s : 5 mm/s : 10 mm/s : 10 mm : 600x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2450 mm : 3270 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel and foot pedal Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 66700 € : 1260.63 € : 150 to : 500 mm : 1.550 x 2.000 mm : 800 mm : 20 mm/s : 3 mm/s : 2350 mm : 2000 mm : 2500 mm : 4100 kg : horizontal verschiebbar : 1550 mm : 1000 mm : 1300 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software so ...

greates pass round over bed: 670 mm swing diameter over bed slide: 490 mm max. turning diameter: 490 mm control: SIEMENS - 840 D main spindle bore: 115 mm external spindle dia. in forward position: 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, A machine video from the production plant will be shared on request. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : 1530 mm : 12 mm : 9 mm : 8 1/min : 3 ° : 8 : 500 mm : 15 kW : 180 l : 950 mm : 2200 mm : 1200 mm : 1800 mm : 3400 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 62500 € : 1181.25 € : 150 to : 500 mm : 800x400 mm : 900x600 mm : 500 mm : 300 mm : 20 mm/s : 3 mm/s : 4 kW : 2200 mm : 1500 mm : 3000 mm : 5500 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil c ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12900 € : 247.68 € : 1550 mm : 3 mm : 110 mm : 3 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 12500 € : 240 € : 150 to : fix : 150 mm : 780 mm : 1000 mm : 1900 mm : 1200 mm : 2450 (PSS: 2600) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 150 TL: 1 speed 4 mm/s, single-hand control with lever € 12.500,00 PSS 150 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 13.500,00 PSS 150NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 14.500,00 PSS 150: same as PSS 100 NC but with stroke 500 mm € 18.000,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20700 € : 397.44 € : 150 to : fix : 1000 mm : 300 mm : 1020 mm : 610 mm : 9 mm/s : 5 mm/s : 10 mm/s : 8 mm : 600x1020 mm : 100 mm : 190 mm : 2110 mm : 1000 mm : 2450 mm : 2400 kg 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 103500 € : 1956.15 € : 150 to : 500 mm : 1250x1000 mm : 600 mm : 23 mm/s : 4 mm/s : 5.5 kW : 1520 mm : 1270 mm : 2500 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ModulMWS - ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 71000 € : 1341.9 € : 150 to : 300 mm : 750x500 mm : 1000x700 mm : 500 mm : 10 mm/s : 3,5 mm/s : 22 mm/s : 7.5 kW : 2300 mm : 1400 mm : 2750 mm : 7700 kg 2-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Information: - Max. speed: 1,800 rpm - Weight: 700 kg - max. Hydr. Pressure: 180 bar - The machine had not been in use for several years, but was previously in a functional condition Brush: - Type: PFP900-SMT - Masch.-Nr.: 551183 - Year of construction: 2005 - Max. speed: 150 rpm

Groninger plastic bottle filling & capping line comprising ZSB 2000 empty bottle unscrambler, DFV 10005Q in-line filling machine with 10 filling stations with cross-feed function, dosing range of 5 to 1000 ml, bottle height from 30 to 250 mm, transport cup dimensions (pucks) 108 x 80 mm and KVK 106 rotary capping machine with 6 capping stations with ZSK 1500 cap sorter and a lift-off conveyor for the transport cups (pucks), capacity up to 150 bottles per minute

Volvo EC15E (2018) 3-cylinder diesel engine (Volvo D0.9 A engine) Power: 12 kW / 16 hp Displacement: 0.898 l Weight: 1,565 kg Bulldozer blade (Blade) Rubber tracks Joystick control Mechanical quick coupler Telescopic chassis (adjustable track width) Cabin heating Hydraulic connections on the arm Ditch Cleaning Bucket & Cleaning Bucket Swivel arm on the cab

CNC Drawer fronts processing machine Brand: Comec Type: FRONTAL CN 1500 2S New machine for point to point drilling and milling, with automatic loader and pieces return to the operator Structure Frame of electro-welded steel sheet of heavy-duty construction Loading system 1 fix left shoulder and 1 mobile right shoulder on which are fixed the loader, magazine and locking system. Manual adjustment of the mobile shoulder on ball bearings slides with measure indication by digital display. Automatic loader with vertical adjustable magazine. Pieces advancement system step by step with 2 working stations, complete with locking cylinders on each station. Pieces return system Pieces return system composed with: 1 transversal motorized belt kW 0.37. 2 ejector cylinders. 1 longitudinal, lateral motorized belt kW 0.37. 1st Working station: vertical-horizontal Point to Poi ...

Malt Mill Sommer Hafer-Boy Piccolo 150 kg/h This grain crusher can crush various grains, such as oats, barley, wheat, corn, spelled etc. It has two rolls which one is driven by an electric motor with belt drive. Mill was manufactured in year 2106 by German Egon Sommer and it is in good operational condition. Technical Characteristics Manufacturer: Egon Sommer Maschinenbau GmbH Manufacturer’s model: Hafer-Boy Piccolo 11SB Manufacturing year: 2016 Capacity: 100-150 kg/h Number of rolls: 2 Electric motor: 1.1 kW / 400V / 50Hz Main dimensions: 58x40x33 cm (LxHxW) Weight: 64 kg

Halbautomatische Kappsäge Fabr.: Salvador Typ: SUPERPUSH 150 Neumaschine Superpush 150 ist das Einstiegsmodel für den Holzzuschnitt mit Optimierungsfunktion. Die Maschine wurde als direkte technologische Weiterentwicklung der herkömmlichen Sägemethoden entwickelt und kann sowohl die Produktivität als auch die Holzausbeute steigern. ÄUSSERST ROBUST Die Struktur besteht aus dickem, verstärktem und lackiertem Stahl. Horizontale Auflagefläche mit beweglichem Schutz, damit das Werkstück leichter eingelegt werden kann. Schlitten mit Messanschlag und Schubfunktion. Lineareinheit mit Zahnriemen mit Stahleinlagen und Gleitschiene mit Linearlagern. Horizontale, durchgehende Werkstückablage mit einer Breite von 300 mm. TECHNOLOGISCH INNOVATIV Elektronisches System bestehend aus einem Touchscreen mit integrierter CNC. Software für Linux-Umgebung mit kundenspezifische ...

Size: 0x0 Equipments: Speed: Machine output: 360 cycles/hour

0: 355 - 4010 mm Working height: bei 90° = 315 mm 0: 45°/90°/45° 0 weight: 2050 kg Cutting height at 45°: 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 8900 € : 171.77 € : 100 to : fix : 300 mm : 1570 mm : 220x160 mm : 5 mm/s : 10 mm/s : 2500 mm : 1000 mm : 2200 mm : 1600 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 070168 : prompt, Zwischenverkauf v : Türkei : 10900 € : 209.28 € : 1 : 150 to : horizontal verschiebbar : 300 mm : 1070 mm : 280x200 mm : 5 mm/s : 10 mm/s : 2110 mm : 1000 mm : 2480 mm : 1870 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 75000 € : 1417.5 € : 150 to : 500 mm : 2.500 x 2.050 mm : 800 mm : 20 mm/s : 3 mm/s : 2900 mm : 2500 mm : 2500 mm : 5200 kg : horizontal verschiebbar : 2050 mm : 1400 mm : 1600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software sol ...

: neu : 2024 : 7321 : prompt, Zwischenverkauf v : Türkei : 12500 € : 216.96 € : 1 : 11300 € : 150 to : horizontal verschiebbar : 300 mm : 1570 mm : 280x200 mm : 5 mm/s : 10 mm/s : 2630 mm : 1000 mm : 2480 mm : 2100 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling machine MIKRON WF3DCM/155 Heidenhain TNC 155 Internal machine no. 58 Travels: X-axis: 500 mm Y-axis: 500 mm Z-axis: 350 mm Table surface: 800 x 450 mm Mount: SK 40 DIN ISO Machine weight: approx. 2.3 t

: neu : 2025 : .00775 : prompt, Zwischenverkauf v : 949.81 € : 1 : 150 mm : 40 mm : 33 kg Vice [felix] 2.0 150 Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm) Taper mandrel B18/MK IV Reducing sleeve MK III/MK II Reducing sleeve MK III/MK I The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 340 mm turning diameter over slide rest: 177 mm turning length: 630 mm spindle turning speed - stepless: 55-3000 U/min weight of the machine ca.: 1.55 t dimensions of the machine ca.: 2 x 1 x 1.6 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Can Filling Line 1500 cph with CASK mACS filler and ELF labeller Complete can filling line from the can shaker to rotating buffer table all delivered by Canadian CASK in year 2022 suitable for beer, kombucha, cider, tee and other drinks. Can shaker is semiautomatic and requires forklift for lifting can pallet after very layer of cans. Once the layer is on the shaker, cans will flow down with gravity to ricer and finally to inlet screw of CASK mACS can filling station. This CASK mACS Micro Canning System features a three-head filling station. Its inline fill-head control technology integrates fill-level sensors with proprietary foam-control valves, enabling precise and independent control of each fill head. The system includes CO₂ pre-purge using a piston-style purge mechanism that fully evacuates oxygen from the can prior to filling, helping ensure product quality and improved ...

Aircooled chiller/Heat pump YORK YMPA0160PE50 159 kW/160 kW Cooling capacity: 159 kW / 45.21 tons (12/7 — 35°C) Heating capacity: 160 kW / 45.5 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump. Hydraulic module Refrigerant circuit: 3 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 4 pcs. COPELAND ZP143KCE-TFD-423 (scroll) + 1 pcs. HITACHI DC80PHDG-D1J2 (scroll, inverter) Type of refrigerant: R410a Number of fans: 3 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo (Frequency inverter) Dimensions: 3.05x2.24x2.5 m. Weight: 2071 kg. Working hours: 0/0/0/0/0 h. Condition: New

General SKU084T495 MakeCollette TypeGRAL-150 Mach.No.77MG15005 Year of construction1978 Main Features MaterialStainless steel Volume150 Ltr. Motor15 KW Specified Features - Universal mixer Gral-granulator(1x) Capacity150 l Vessel sizesø 690 x 450mm, Vessel can be lifted hydr. With covercheck Pneumatic operated outletø 200mm With motor7,5/11,0 kW,(380 V (Ex)) Rotor speed150/225 rpm With lump breakercheck With motor3,0/4,0 kW, (380 V (Ex)) Rotor speed1500/3000 rpm With timercheck MaterialStainless steel 1.4552, Stainless steel 1.4306 (304L) Information LocationBarneveld With switchgearcheck Floorspace2,5 x 1,0 m Total height2,3 m ATEX compatiblecheck Extra Specifications- Air purged seals on mixer/chopper shafts Technical specs Extra informationVessel can be lifted hydr.Universal mixersDiscountColletteMixers > Universal mixersDiscountBrand > Collette What  ...

General SKU135N667 MakeSussmeyer TypeHM 150 E.H.P. No.103780 Year of construction1990 LocationBarneveld Main Features MaterialMild steel Volume150 Ltr. Motor84 KW Specified Features - Sand mill MaterialMild steel Horizontal sand millcheck Capacity150 Ltr. Housing dimensions Dia. 420x1300mm With mechanical sealcheck With jacketcheck Motor84 KW, 380/660 Volt (Ex) With variable speed drivecheck Information Floorspace3,6x1,5 m Total height1,9 m Weight4250 kg ATEX compatiblecheckSand millsDiscountSussmeyerMills > Sand millsDiscountBrand > Sussmeyer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!