15 mw used for sale

81 pallets with scrubbing disc List on request Total weight approx. 60 ton net Total quantity approx. 160,000 pieces VE date 2025/2026 Price on request

Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton

Key data: 6200 mm, 1 mm

Motor scissors, 5 stop fingers, laser protection, with back gauge, Projection: 1000 mm, Colour: blue, Total power requirement: 3 kW, Insertion depth: 1000 mm, with roller shears, number of stands: 5 pieces, opening width: 200 mm, Bending angle: 145 degrees Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Machine Number: 8432

Parallel Lathe CAZENEUVE HB 725 Between points: 1500 mm Maxi Ø on bench: 725 mm Maxi Ø over saddle: 400 mm Spindle diameter: Ø 80 mm Rotation: from 16 to 1250 RPM Square turret 4-jaws chuck Ø 450 mm Spindle motor power: 13,2 kW Threadings: Metric + Whitworth Tailstock: CM6 Rapid advances Supplied with some sets of hard and soft jaws + one 3 points steady max Ø 250 mm Lubricant tank Lubricant pump Voltage: 220 V Tri Length: 3200 mm Depth with tank: 1600 mm Height: 1800 mm Weight: approx 4,5 T

Manufacturer: Paul, Type: Sägewelle K 1500, Diameter saw spindle mm: 100, Cutting width max mm: 1500,

Manufacturer: Wandress Bürstenmaschine Unten 1 Bürste, Type: CM29/950/1500, Year: 2006, Control: Siemens, Dust removal brush: yes, Brush type: Fibre, Number of units: 1, kW Leistung Motoren: 1 x 0,9, Working width mm: 1500, Through running hight mm: 95, Roll transport: yes, Feeding speed continous adjustable: 3 - 120, Feeding speed min-max m/min: links, kW-Vorschub: links, Fixed edge on left: yes, Fixed edge on right: yes, Ionising: 2 x 150, rotor jets: 800, Year :2006

Manufacturer: Düspohl, Type: DEA 150, Year: ca.1995, Control: hand, Pneumatical clamping system: yes, Schnitthöhe min-max mm: 120, Schnitttiefe min-max mm: ca.150 -150, Power saw engine kW: ca.3, Action controlled: yes, Saw blade diameter max mm: 350, rotations controlled: 4500, Year :ca.1995

Manufacturer: Boge, Type: S 150, Year: 2004, Volume flow m³/min: 14,20-18,95, Operating hours: 24098, Running idle houres: 1190, Final compressed pressure bar: 7,5-13, Drive power kW: 110, FREE TEXT: Lüftermotor 4, Year :2004

Manufacturer: Harwi, Type: Piranha 1550, Year: 2015, Cutting lenght mm: 3300, Cutting depth mm: 1550, Working hight mm: 55, Saw Blade Diameter mm: 250, Main engine kW: 3, Wight approx. kg: 485, Year :2015

Manufacturer: Kuka KR 150-2 2000, Year: 2007, Max workpiece weights kg: 150, Year :2007

Manufacturer: Kuka KR 150-2 2000, Year: 2007, Max workpiece weights kg: 150, Year :2007

Manufacturer: Böhl Wickelautomat , Type: SV 1500, Year: 1993, Control: Siemens S 5, Work piece width min-max mm: 300-1200 , Min.-max. workpiece length in mm: 450-2500, Min.-max. workpiece height in mm: 20-900, Belt conveyor: yes, Aligning station: no, Width:165 to 250 mm: yes, Min-max roller diameter mm: 250, Automatic product recording: yes, Belt inlet control: yes, Function repeat: yes, Feeding belt L x W x H mm: ca 1500, Feed out belt L x W x H mm: ca.1500, Foot switch: Handschalter, Year :1993

pressure: 150 t chamfer lenght: 4300 mm distance between columns: 3700 mm ram stroke speed: 100 mm/sec working feed: 8 mm/sec return speed: 80 mm/sec stroke: 175 mm table height: 920 mm Control: DELEM DA 52 total power requirement: 11 kW weight of the machine ca.: 15000 kg dimensions of the machine ca.: 4800 x 1700 x 2850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BÜHLER Swivel Nether MOZL 45/150 Ex protection 15 kW Bearing regreased and test run carried out Very good condition

Vacuum lifter, vacuum lifter from Schmalz for heavy plates with new suction rubber Load capacity 150kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees motorised Suction box 1000 x 675mm Acoustic warning signal in case of too low vacuum 400V, 1.5kW Can be attached to on-site chain hoist CE mark No test book available Vacuum cleaner rubber renewed Mint condition The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Inv. Num. : 8281 Type: KTVF 55x3/1500 Producer: BC ECO TECH Created: 2010 Parameters: Capacity: 200 kg/h Maximum number of film layers: 3

Grundfos Water Pump LP 65-160/154 Pump from 1993, used, 2 available. 3.9 KW, 22.5 m3/h, 10 bar Grundfos CRN3-23 Water Pump Manufacturer: Grundfos Model: LP 65-160/154 A-F-A-BUBE Serial number: 0060034-P2-9343 Type: Water Pump with Control Power [kW]: 3.9 Volume flow rate [m3/h]: 22.5 Pressure max [bar]: 10 Pumping height [m] 26 Year of Make: 1993 Weight [kg]: 40

The scope of delivery includes: 01x Shelf connectors, used Manufacturer: Stow Type: Pal Rack NS Material colour: sendzimir galvanised Total length: approx. 150 mm Shelf spacing: approx. 150 mm Cross-section: U 35x25 mm Material thickness: approx. 2.00 mm Drill hole diameter: approx. 11 mm Weight: 0.200 kg | Pcs. 02x Screws M10 x 35 mm 02x Nuts M10 04x Washer M10 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Fanuc A06B-0505-B071 #7000 20S/1500

It is a used bowl for Kemper spiral mixer Pro 150 A for sale. Price on request.

1- one combination of lay-up, turning and unloading 2- BTF Multifoiler 3- Multi-Pin-System Useful area 1330x2630 mm Max size of board 1250x2550 mm Min foil width 1400 mm

The scope of delivery includes: 25x balance plate, new suitable for manufacturer: Mecalux Material colour: sendzimir galvanised f. Frame profile: P 101 Material thickness: 1.00 mm Overall width: 155 mm Total depth: 110 mm Hole diameter: 15 mm Number of drill holes: 02 pieces Weight | Pcs.: 0,130 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Wipotec continuous scale 1500-1100-1000 RA2394 No Controller, optional retrofittable This belt conveyor is designed for products up to a maximum of 60 kg. Manufacturer: WIPOTEC Type: WM10 Year of construction: 2010 Total size: approx. 1500 x 1100x 520mm (WxDxH) Electrical connection 1x Light barrier 1x Sick Stegmann DKV60-E1Z0-S05 1x Closeness sensor for speed measurement Weighing technology: Weighing range: 0 - 60000 g calibration values e: from 10g degree of accuracy d: 1g TYP: IW-B 150K Conveyor belt 1500-1100-1000 and SEW gear motor Conveying length (FL): 1500 mm effective width (NUB): 1100 mm belt width (GB): 1000 mm hight (BH): 420-545 mm Motor Type: SEW Gearmotor Motor Power: kW 0.75 S1 Hz 50 Speed: 1,25 m/s Features: Nominal / outside width in mm: 700 scope of delivery: including supports without side guides, inklusive Frequenzumrichter, inklusive Lichtschranken Conveying length ...

Control: OSP-P 300S-H Travel: X-axis: 695 mm Y-axis with stroke: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Mount: HSK 63 Total tool positions: 40 Accessories: XA and YA axis with direct absolute measuring system (Okuma ABSO-Scale) In-Process Measuring with Renishaw X/Z Axis Probes Measurement in Y-axis incl. measurement in oblique axis mode KitagawaB215A11 max. 2,800 rpm KitagawaB210A8 max. 4,200 rpm Hollow Clamping Cylinder Kitagawa F 2596-H01 Ø96 mm One-Touch IGF Software Multi-Tool Harmonic speed oscillation Software package simultaneous 5-axis machining Conveyor Coolant tank with high-pressure pump 70bar

Optima EC automatic continuous scale 1390-750-1500 RA1259 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 2000 Machine type: automatic checkweigher Total size: approx. 1390 x 750 x 1500 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative ...

Max pressure: 150 ton Table size: 620 x 600 mm Between columns: 620 mm Lower and upper table are heated Max temperature: 200° C Weight: 8 ton

Inv. Num. : 8313 Type: 1500 R Producer: Kellenberger Created: 1972 Parameters: Table dimensions: 2060 x 140 mm Maximum grinding diameter: 250 mm Max. grinding length: 1500 mm Length: 3270 mm Width: 1600 mm Height: 1650 mm Weight: 3250 kg Equipment: DRO

Max pressure: 150 ton Table size: 500 x 500 mm Between columns: 500 mm Lower and upper table are heated Max temperature: 200° C Weight: 4,5 ton

Sales are made on behalf of the customer

workpiece weight: 150 kg workpiece length: 2500 mm diameter: 160 - mm balancing speed variable: 100 - 3000 U/min dia. axle journal: 160 - 350 mm voltage: 400 V total power requirement: 1,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: m Balancing unit: m Control: m Software TIRA X9000 Operating System Windows XP Software update 2007 Serial No.: R 32/98 Max display sensivitiy: 0.5 gmm Balancing speed 100 - 3000 RPM The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt measurements: 150x2000 mm : 1400/2800 U/min band speed: 16,5/33 m/s total power requirement: 2,6/3,37 kW weight: 190 kg Standard features: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt measurements: 150x2000 mm : 1400/2800 U/min band speed: 16,5 / 33 m/s total power requirement: 3,4/4,5 kW weight: 190 kg Maximum grinding of pipes is possible: at 90 degrees max. 150 mm Ø at 60 degrees max. 127 mm Ø at 45 degrees max. 100 mm Ø at 30 degrees max. 70 mm Ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used stainless steel egalizer, capacity: 1500 liters.

Universal machine Manufacturer : Stephan Type: KG 150 Technical specifications : The machine is suitable for slicing, grating, grating, shredding, straining and whipping Hourly output 300 – 800 kg/h Agitator with 2 speeds 142/284 rpm stainless steel

max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 weight of the machine ca.: 10.000 kg dimensions of the machine ca.: 6500x 2700x 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEMTECH Dynamic Torch 150/300 plasma cutting machine was built in 2022 in Poland by WEMTECH CNC. The machine, designed for precision machining of workpieces, is distinguished by the use of modern technical solutions that guarantee excellent production performance for many years of use. The machining process is performed on a table with a large cutting area which is filled with water or other coolant. The use of this solution eliminates the need to undertake any further secondary processes, such as grinding. The work table also has sectional exhaust extraction. The individual sections of the extraction table are controlled by pneumatic cylinders. The axes are driven by a stepper motor with a gear wheel mounted on a cushioned sled. This drive effectively eliminates backlash, as well as ensuring the achievement of high acceleration and working speed. The plasma torch, on the other hand,  ...

Technical data Specifications are subject to change without notice. Dimensions are subject to change. Dispensing width (max.) 130 mm Dispensing height (max.) 75 mm Dispensing length (max.) ~60-280 mm Motor power 0,25 kW Voltage (3-phase) 400/50 V/Hz External dimensions (W x D x H) 616 x 1407 x 1185-1385 m

Technical specifications: Machine: Eagle iNspire 1530 30kW Laser source: Model YLS-30000 CW Workspace: 1500mm x 3000mm Year of production: 2024 Laser power: 30 000W Head: eVa v11.020 2.0 Additional options: 1. PRODUCTION KIT - The production kit is prepared according to the machine series, laser power and set of consumables necessary to start production immediately. 2. PREPARING MACHINE FOR AUTOMATION - It allows for the possibility of an already installed fiber laser cutting machine to be fully integrated with an automation system in the future. 3. ADDITIONAL PULPIT - The operator doesn’t have to go in front of the machine to control the cutting process or run the program. On the additional control panel, the whole cutting process is visible thanks to the camera installed inside the machine. 4. EAGLE EYE - The function allows you to monitor all the activities taking pla ...

KIMLA POWERCUT LF 1530 6 kW fiber laser for tubes and sheet metal was built in 2021 in Poland. The reliable machine built on a rigid monolithic body equipped with state-of-the-art fibre technology guarantees the achievement of very smooth and even edges along the entire length of the workpiece, regardless of the machined material. The sheets are cut with a high-quality 6 kW fibre optic beam on a steel work table with integrated automatic pallet changing system, which allows uninterrupted machining by simultaneous loading and unloading of the workpieces during the cutting process. All cutting parameters are programmed in the intelligent PC-CAM CNC controller, which allows for very fast and dynamic operation with excellent accuracy. The KIMLA fibre laser cutting machine is also equipped with an integrated cutting system, extending the machine’s machining capabilities to include the cu ...

Used-refurbished equipment 6 months warranty refurbishment time approx. 3 weeks 152 needles 600mm tape width max. capacity 6000kg/h Technical data: Power: 8 kW Dimensions (HxWxD): 1880x965x2100 mm Weight: approx. 580 kg Electrical connection: 400V, 50Hz, 3phase

Key data: 150 kg, 480 mm, 375 mm

Hammer weight: 150 kg Stroke length: 480 mm Stroke rate: 168 p/min. Projection: 375 mm Plunger diameter: 180 mm Origin: England Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine Weight: 6000 kg

Continuous Butter Churn Westfalia Make : Westfalia Model : BUC 1500 Capacity : 1500 Kg per hour Cream Tank included Controls : VFD Drives , Touch Screen PLC Plate Heat Exchanger Water Valves , PHE, Control panel Butter milk Tank Main Control Panel Condition : Excellent Location : DAIRY MACHINERY UK

Key data: 3000 m³/h, 7 kW

Filter capacity: 3000 m3/h Filter area: 52.5 m2 Filtering and suction of: -Smoke -Dust -Laser Motor power: 7.5 kW Country of origin: Germany Weight: 1100 kg

UGB-150 widht: 1435mm rangę diameter : ø600 do ø1500mm maks. distance: 1500mm

Key data: 3000 , 1500 , 15000

Machine options included: - Eagle AC - MYEDROP - drag & drop option - MYEBOOST - very fast cutting up to 12-15mm - MYECAT - improved cutting quality of big thicknesses; possibility to cut rusty metal sheets - MYEMIX 1.0 - no burr cutting of mild steel and aluminium up to 12mm by automatically changing between 3 gases. - MYESPOT - Super fast sheet measurement system CraneMasterExtended S-DOWN Automation options included: - Separation of sheets - Sheet thickness measurement - Anti collision system - Automatic Machine combs cleaning system - Each suction cup control - Double number of suctions cups

Maplan 250ton Injection Machine Injection MTF 1500/250 Platen size = 630mm x500mm Stripper plate/ejectors =top only Max gap between platens = 702mm Volume = 1500 ccm3 Tonnage = 250T Year 2007

Single-shaft shredders Technical Specification: Hopper opening: 600 x 800 mm Hopper capacity: 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 260 mm Drive power: 15 kW Rotor speed: 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of the knives: concave / 40 x 40 mm, cutting turning crowns concave / 30 x 30 mm, scraper blade Screen perforation: 15/20 mm Lacquering: Frame in RAL 5010, Tricher in RAL 7016 (HoKuTech standard paint) Connected load: 400 V +/- 5 % / 50 Hz For material: chipboard, MDF/HDF, softwood/hardwood, OSB inclusive: - Control cabinet (Rittal) with 5 m cable - Electrical control (PLC Siemens) - Star triangle run-up - Rubber oscillating elements - E-rotor with knife pockets milled into the profile - Transmission limit switch - 1st row of knives - Hold-down device on the slide for long and large parts - Large 4 ...

Key data: 400 mm, 1500 mm

Control Siemens ... Simatic OP17 Max. grinding diameter ... 400mm Max. sanding length ... 1500mm Max. workpiece weight ... 500kg Internal grinding Machine weight ... 9200kg L x W x H ... 6220x2760x1950mm The machine is in good condition, possible to test under power.

Netstal S-1500-460 (2003) Clamping force - 150 t Screw diameter - 45 mm Hours - 79.000

: 0390 mm : 240 mm : 1250 mm : 190 mm : 54 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.