15 mw used for sale

Inductive sensor, electronic sensor -Pepperl Fuchs Part No.: 187480 -Dimensions: 245/225/H45 mm -Weight: 1 kg

turning diameter: 555 mm turning length: 1500 mm turning diameter over slide: 290 mm 3-jaw-chuck diameter: 315 mm make: Röhn control: Monforts MTCK quick change tool holder: Multifix C steady: turning speeds: 2-2800 U/min transmission ratio: 3 face slide travel: 235 mm spindle passage: 70 mm tailstock quill taper MT: 5 total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,9x1,6x1,8 m About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ARBURG 270 S 150-60 U ALLROUNDER MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60

Herbort 159D Homogeniser Serial: 1 Stainless homogeniser, 150l stainless hopper, 3Ph

Moving bezel, moving bezel, bezel, steady rest, lynette -max. passage: Ø 155 mm -Tip height: 265 mm -Technical drawing: in the photos -Dimensions: 445/60/H485 mm -Weight: 18 kg

Micrometer, micrometer screw -Measuring range: 125 - 150 mm -Handover: as is as seen -Accessories: missing, see photo -other sizes: available -Dimensions box: 330/180/H30 mm -weight: 1.1 kg

FERROMATIK MILACRON ELEKTRA 155 injection moulding machine manufactured in 2003 in Germany after a general overhaul at a total value of approximately 14290 EUR. During the 2024 overhaul, components such as the clamping system drive screw, belt pulley, drive belt, lubrication system sensor, clamping pins, pan and drive belts in the plasticising unit were replaced. In addition, both motors in the plastification unit were refurbished and a periodic column tension check was carried out with the GEFRAN strain gauge system. The FERROMATIK MILACRON EE155 injection moulding machine is the perfect choice for the mass production of plastic parts of different colours, shapes and sizes by injection moulding. The machine’s high-performance components significantly enhance any, even the most intensive, machining process. These include an electric drive, which, compared to a hydraulic drive, offer ...

Quick-release clamping device, quick-release clamp, drilling device, drill bushings -Drilling jig: as a quick-clamping device for flat material -Transport box: incl. -Drill sleeves: Ø 12 mm, spacing 100 mm -Dimensions: 1900/150/H60 mm -Transport box: 2040/225/H280 mm -Weight: 70 kg

Edge grinding machine Work table swivel 45° Grinding height 150 mm Table dimensions 1440 x 710 mm 2 speeds for sanding belt 12/24 m/min 37qqrtber Height adjustment 130 mm from the unit

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: stroke 155 mm -Piston rod: Ø 70 mm -Hole: Ø70 x 70 mm -Cylinder: outer Ø 120 mm -Dimensions: 865/160/H160 mm -Weight: 53 kg

pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -pneumatic straight screwdriver -Operating pressure: 6 bar -Speed: 900 rpm -Price: per piece -Number: 2 pieces -Dimensions: 380/42/H67 mm -Weight: 1.4 kg/piece

Motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump support for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 68 mm -large recess: Ø 70 mm -Dimensions: Ø 125/H49 mm -Weight: 0.4 kg

Stock no.: 503260 Machine/ Device Type: Dry Air Dryer Manufacturer: Anvil+Longleg Type: Sectional dryer H150 Year of construction: 2011 Sectional dryer H 150 with 8 sectional boilers à 100 l Tank capacity: 8 x 100 L Air flow: 400 m³/h The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the dryer system adapts individually to the operational requirements and can be realized in the smallest space. The dryers work dew point controlled and with an energy-saving heat exchanger. Depending on the production requirements, the air flow rate is regulated between 140 and 400 m³/h by process control. Each dryer boiler has an individual temperature control. A separate scanning of the dry goods prevents overdrying and insufficient Drying due to excessive material removal.  ...

Welding fume extraction table Welding table DCE UMA150HG5 dedusting Welding table with integrated suction with filter Manufacturer dust control equipment dust collectors Type UMA 150H G5 Rest according to photos

Standard Equipment's Chrome Coated Cylinder Boiled Steel Body Pressure indicator Pressure Adjustment User guide 2 Years Warranty CE

Rolled lead, lead rolls, leadPlus, wound lead -Rolled lead: LeadPlus wound lead in rolls -Alloy: 710 -Roll: L x W x D: 150,000 x 145 x 0.45 mm -Quantity: 10 rolls available -Price: per roll -Weight: approx. 110 kg/roll

Rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad -Gum plate: from pre-tensioning technology -Thickness: 48 mm -Width: 150 mm -Length: 200 mm -Number: 12 pieces -Price: per piece -Weight: 4.3 kg/piece

SUMAB is currently offering a horizontal steam generator. Technical details: Capacity 1500 kg/h, allows you to produce steam in a short period of time. Pre-installed accessories are ready to run. A two part platform for easy assembly on site. Includes: water softening device, condensate tank, cavitation preventing pump, by-pass group with float trap, all fittings and piping connections.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Langen, hydraulic cylinder type ZD 63/150 -Stroke: 150 mm -Cylinder: outside Ø 75 mm -Piston rod: Ø 45 mm -Mount: hole circle Ø 69 mm -Dimensions: 345/140 / H95 mm -Weight: 11 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder -Manufacturer: GSL, Hydraulic cylinder, tilting cylinder, stroke 1590 mm -Type designation: D040025-Z2 T06 -Piston rod: Ø 25 mm / Mounting Ø 20 mm -Dimensions: 1895/90/110 mm -Weight: 19.5 kg

Table length 1480 MM Table width 600 MM Table height adjustment stroke 600 MM Engine 2 hp – 1.5 KW Band length Max Min 3950 MM-3800 MM Bandwidth 100 MM Belt speed 24 m/sec Weight CA 250 KG Space requirement 180 X 100 X h 170 cm CE version

150 Litre kettle. Gas energy / Propan-butan

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 14 pieces -Tool angle: 25° -Drawing: in the photos -Dimension: 25 x 158 mm -Length total: 2615 mm (lengths see parts list photo) -Weight: 47.3 kg

Pipe sealing bag, leak-tight cushion, sealing plate, pipe seal -Rohrdichtkissen -Outside / inside Ø 195/155 mm -Height 53 mm -Delivery of steel / stainless steel cover plates possible -15 x pillows available -Price per piece -Weight 0,5 kg / piece

Bracket, holder, support block, retaining support -Bracket: height adjustable -Threaded rod: Ø 45 mm -Dimensions: 255/152/H225 mm -Weight: 10.7 kg

Multipurpose hoist, grab hoist, hoist, assembly hoist, rope hoist, universal rope hoist -Cable with: 1500 kg load capacity -Incl. 1x rope: Ø 11 mm/20 m length with safety hook -Dimensions: 750/530/H160 mm -Weight: 31 kg

Manufacturer: Arburg Type: 320 C 500 - 150 Year of production: 2000 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 498 mm x 498 mm Tool height: min 225 mm Opening distance: 350 mm Plate spacing max.: 575 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15 kW Heating: 4,8 kW Dimensions: 3.4 m x 1.4 m x 1.7 m Weight: 2250 kg Screen text: German Additional equipment: Machine with handling Multilift Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor

Code: 0021 Brand: BOHR - AUSTRIA Model: 150/330 Sanding pad for belt sanding machine Universal sanding pad for belt sanders in graphite for solid wood and veneer - mm 330 x 150 Overall dimensions mm 330 x 150 x 100 h Weight kg 4

Electric heater, electric heater, heating coil, electric tubular heater, touchable semiconductor heater, switch cabinet heater -Manufacturer: Stego, switch cabinet heating -Type: CSF 060 -Power: 150 watts -Voltage: 120-240 V -Dimensions: 150/60/H90 mm -Weight: 0.4 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 15 mm -Piston diameter: 32 mm -Piston rod: 16 mm -Price: per piece -Number: 6 pieces -Dimensions: 55/45/H50 mm -Weight: 0.2 kg/piece

Qty. 1 Second-hand slitting line - dismantled Manufacturer: Mariani (Italy) Built: 1988/89 Electrical and controller are of 2006 Status: dismantled and in storage Strip width: 1500 mm Thickness: 0,5 - 3 mm Coil weight: 25 ton Coil ID: 500 / 700 Coil OD: 700 / 1700 Slitting shear rollers diameter 220 mm Knives dia.: 355 mm Line speed: 80 m/min.

KOEPFER 151 Gear Hobbing Machine - Horizontal Available 2 machines. Semi-automatic machine Max. gear dia 150 mm Module 2 Max Profile depth / Plunge cut depth 7 mm Max hobbing length 135 mm Max length of workpiece, approx. 280 mm Hob slide swivable 250 degrees Hob size dia x length 65 x 60 mm Hob shifting, manually max. 40 mm Hob Spindle speeds 140 – 1120 rpm Workspindle bore 24 mm Bore of collet chuck, max. 3 – 24 mm Feed range, axial/plunge cut 0.06 – 2 mm/rev No. of teeth, min./max. 6 - 200 Spindle Drive/Total electrical load, approx. 2,2 / 4 kW Weight, approx. 1,400 kg Very good condition

Qty. 1 Second-hand slitting line - dismantled Manufacturer: Guida (Italy) Built: 1990 Status: dismantled and in storage Strip width: 1500 mm Thickness: 1.0 - 8.0 mm Coil weight: 20 ton Coils ID: 500/600 plus steel spacers for bigger diameter Shear roller diameter: 220 mm Knife diameter: 355 mm Speed: 0/25/50 m/min

Length: 1000 mm Width: 680 mm Height: 1510 mm Machine weight ca.: 0,2 t well-preserved clamping angle with various holes for clamping holes.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Martonair type: M3332 150 DF -Stroke: 150 mm -Piston rod: Ø 25 mm -Number: 2 pieces available -Price: per piece -Dimensions: 90/130/H640 mm -Weight: 9.7 kg/piece

Thermal systems, fan heaters, heating elements -Space-saving fan heater: HVL 150 -Power: 150 W -Price: per piece -Number: 4 pieces -Dimensions: 110/105/H60 mm -Weight: 0.5 kg/piece

Fully refurbished intensive annular tray mixer with 1,500 l. net batch capacity and 1,000 l. hardened concrete output. The mixer is equipped with 2 agitators which are driven by the main drive, and with 1 discharge gate.

Machine vise, sturdy vise, drill vise -Jaw width: 160 mm -Back height: 47 mm -Clamping depth: max. 157 mm -Number: 1x vices available -Price: per piece -Dimensions: 460/226/H130 mm -Weight: 33 kg

faceplate diameter: 1130 mm swing diameter: 1500 mm turning height: 1100 mm faceplate diameter: mm swing diameter: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: STANKO TYPEL 1512 Build in: 1977 with pneumatick 3-jaw stuck 1130 mm max. turning diameter 1500 mm max. turning height 1100 mm Motor 30 KW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulic machine vice -Jaw width: 125 x 45 mm -Clamping depth: 150 mm -Dimensions: 430/210/H110 mm -Weight: 30.5 kg

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outer diameter: 152 mm -Height: 20 mm -Hole circle: Ø 125/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 96x pillows available -Minimum order: 3 pieces -Price: per piece -Weight: 0.4 kg/piece

Workbench, work table, assembly bench -Width: 1500 mm -Depth: 710 mm -Height: 890 mm -Thick worktop: 50 mm -Drawer: 1 -Door: 1 -Trays: 4 -Weight: 103 kg

Technical data for the compensating plate: Manufacturer: Bito (M) The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 150 mm Total depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center - center hole): approx. 120 mm Weight: approx. 0.18 kg | Pcs.

Pressure switch for sale, with original packaging

Double bench grinder, bench grinder, column grinder, column grinder -Manufacturer: Cordia, double bench grinder type DOTN-150 -Grinding wheel: max. Ø 150 x 25 x 20 mm -Motor power: 0.35 kW -Speed: 3000 rpm -Operating voltage: 380 volts -Dimensions: 410/200 / H1045 mm -Weight: 33 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Martonair, pneumatic cylinder type SM/925 -Stroke travel: 150 mm -Piston rod: Ø 25 mm -Dimensions: 440/75/H75 mm -Weight: 5 kg

Pressure reducing valve, condensate drain, valve, check valve, control valve -Condensate drain made of: stainless steel -Gestra: UNA 15v -Use: vertical -Pressure: PN25 -Connection: DN15 -Dimensions: 145/100/H200 mm -Weight: 7.1 kg

Technical data for the compensating plate: Manufacturer: Bito (M) The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 150 mm Total depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center - center hole): approx. 120 mm Weight: approx. 0.46 kg | Pcs.

turning diameter: max. 320 mm turning length: 810 mm control: MSX 701 MAPPS III standard turning dia.: 200 mm Main spindle:: Number of revolutions: max. 6.000 min/-1 power capacity - main spindel: 22 / 18,5 kW Bar feed: max. 52 mm spindle bore: 61 mm C-Axis: 0,001 ° Subspindel:: Number of revolutions: max. 6.000 min/-1 power capacity - Sub spindle: 22 / 18,5 kW Bar feed: max. 52 mm spindle bore: 61 mm C-Axis: 0,001 ° Turret 1 + 3:: number of toolpositions: je 16 pos. Number of driven toolspositions: je 16 pos. Spindle speed - driven tools: max. 6.000 min -1 power capacity - driven tools: 7,5 / 5,5 kW Y - Axis: 110 (+65 / -45) mm Turret 2:: number of toolpositions: 16 pos. Number of driven toolspositions: 16 pos. Spindle speed - driven tools: max. 6.000 min -1 power capacity - driven tools: 7,5 / 5,5 kW Y - Axis: 110 (+45 / -65) mm axis stroke:: x-travel: 1-3: 210 mm y-travel: 1-3: ...

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 150/90 mm -Base plate: Ø 183 mm -Height: 58 mm -Weight: 2.6 kg