15 mw used for sale

spindle diameter: 150 mm x-travel: 2005 mm y-travel: 1860 mm z-axis: 1620 mm w-axis: 706 mm control: Siemens 840 C SW5.1 turning speeds: 2500 U/min surface area: 2500 x 2000 mm spindle taper ISO: 50 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m SK50 tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 490 mm, 515 mm

tock-No. 1105-04043 Type of machine CNC Turning- and Milling Center Make MORI SEIKI Type NL1500SY/500 Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis ex Warehouse Price Technical details turning diameter 490 mm turning length 515 mm control MSX-850 max. bar capacity 52 mm Travel -X Axis 280 mm Travel -Z AXIS 490 mm max. speed main spindle 6000 min-1 spindle taper 1 A2-6 C - Axis 0.001 ° Spindle bearing diameter 110/75 mm No. of tools in turret 1 12 Shaft Cross Cut 25 x 25 mm Shank diameter 50 / 32 mm Turret Change Time 0.25 s max. spindle speed driven tools 6000 min-1 rapid power traverse in X-and Z direction 30 m/min Rapids C - Axes 400 min -1 drive capacity - spindle motor 18.5 kW power capacity - driven tools 5.5 kW swing diameter over face slide 278 mm gre ...

used baler Manufacturer: PAAL Type: LIKON 110/150 Year of construction: May 2004 Specifications: Press weight up to: approx. 36 tons Press force at 275 bar: 150 t Operating pressure max. 320 bar Filling opening: approx. 2,000 x 1,020 mm Channel cross-section: 1,100 x 1,100 mm Drive power: 2 x 75 kW Flow rate: 425 m³/h Binding: 5-fold horizontal Total connected load: 176 kW Rated current: 340 A Pre-fuse (min.) 400 A Operating voltage: 3 x 400 VAC/50 Hz/N/PE Control voltage: 230 VAC / 24 VDC including: - Oil cooling - Low-pressure circuit - Free kicks - Key locking system Transport dimensions: Length: 13,803 mm Width: 2,500 mm Height: 3,164 mm without wire unwinding devices, without binding wire, without feed belt, without a personal protection system, without conveyor belt hopper and withou ...

Compresor system Prematic 388/150 PAKO vollaut. L x W x H: 1.1 x 0.7 x 1.2 m Weight approx. 120 kg Built in 2016 Refrigeration dryer Prematic IDFA The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

GeneralMilling Specification; Control: Control M730UM with CELOS CharacteristicsMax machining diameter278 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle11/15/15 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeRotary tool spindle speed10000 rpmMovements X / Z260/590 mmNumber of tool stations12 Speed max.6000 rpmBar diameter max.52 mmSwing- Ø, max.755 mmMax. Turning Length192 mmWeight approx.4900 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (Left Spindle) 15/ 11 kW, 6,000 min-1(Left Spindle) High-Output Spindle 15/11 kW (20/15 HP), 6,000 min-1 The NLX ...

Rotary kiln, gas oven, pyrolysis oven, thermolyse furnace used Manufacture: REIDHAMMER Type: DRA 10/150-G-650; DRA 8/100-G-650 Built in 2015 Temperature max 650° C Natural gas Furnace chamber approx. 8 x 2 x 2.2 m Filling volume 1.77; 0.63 m3 Dimensions total approx.: 17 x 2 x 3 m

spindle diameter: 150 mm x-travel: 2500 mm y-travel: 1600 mm z-travel: 1000 mm spindle taper ISO: 50 turning speeds: 4-1120 U/min Feed: 5-2000 mm/min bore spindle stroke: 580 mm main drive motor: 45 kW table surface area: 1600x2000 mm table load: 12,5 t Control: Heidenhain type: TNC 410 Angle head: chip conveyor: workpiece weight: 15000 kg total power requirement: 80 kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x5x5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmMilling spindle upper side1 Bar diametre80 mmSpeed max.4000 rpmMax. Turning Length1530 mmMax machining diameter670 mmDrive power tool spindle5,5/3,7 kWDrive power milling spindle28/23 kWDrive power main spindle18,5/15 kWMovements X / Z200/1542 mmLower Turret10 PositionsNumber of Toolmagazine positions38 Speed max.12000 rpmSlewability of B-Axis±120 degreeMovements X / Z / Y675/1562/300 (±150) mmWeight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spindle Hol ...

- High pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, - Cold water / hot water / steam 32 bar to 140°C / high pressure steam 150 or 200 bar to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and weight: 110x64x98cm, approx. 150kg - incl. 10 m high-pressure hose, spray gun, lance and flat jet dues 25°

For sale: Wouter Witzel butterfly valve EVBS DN 150 with pneumatic Actreg drive ADA 130 Order number: 7010.2 For more information, please call or send an email. Phone: 06-20758459 Email: wh.derikx@gmail.com The price is plus 21% VAT.

Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 33 m/sec total power requirement: 4 kW weight of the machine ca.: 100 t dimensions of the machine ca.: 1,2 x 0,5 x 0,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We can offer TMT FDY spinning lines, manufactured by TMT, Japan in 2012, Melt spinning lines,from melt PET inlet to winder.each inlet spuuly 3 beams, each beam has 2 positions, spinneret diameter 100mm, pitch 1400mm, redial blowing quenching, each has 4 hot gidets, 230X450mm, TMT ATi-615/32 winder, twins winder,chuck 1500mm,

range L-W-H: 780 x 480 x 1050 mm weight: 79,5 kg : 6 St. The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, one of them with a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning fitted. Height-adjustable storage compartment behind the door. Central locking with 2 keys. Tool trolley is equipped with 155 pieces of tool parts: 3 pcs. Socket sets: 1/4 , 3/8, 1/2 . Ratchet ring spanner set from 6 - 22mm, Extension for socket sets, different allen keys from 1 - 10mm, Various screwdriver sets. Pliers assortment. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAN 2876 E312 gas engine It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. - Four-stroke gasoline gas engine, 150 kW - 6 cylinders in series - Engine cooling: water-cooled - Water-cooled exhaust pipe Installation, installation and service around engine and CHP optionally possible. Old part deposit: 6.000,- EUR Please contact us for a written offer.

Vat with trolley for Kemper SP 150 AL Boiler with trolley and device for spiral kneader Kemper SP 150 AL with automatic boiler feeder. -Stainless steel boiler with carriage -Boiler made of stainless steel -Boiler diameter cm -Boiler height inside cm

: 10 St. weight: 162 kg range L-W-H: 1200 x 800 x 1050 mm Workshop trolley with 30 mm thick solid wood panel. Solid drawers with ball bearings (double bearings) All drawers can be opened 100%. Equipped with scratch and impact resistant powder coating. Each drawer is equipped with an anti-slip mat. All drawers are equipped with a drawer lock. The doors have a magnetic lock and lock. Tool trolley is equipped with 10 drawers and a cabinet with 2 doors. Scope of delivery: 2 x 125 mm. Heavy swivel castor with brake. 2 x 125 mm. Heavy firm roles. 1 x robust handle made of solid steel. 3 x lock for all drawers and doors. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 1860x595x150 mm weight: 125 kg : 10 St. weight: kg weight max. in kg: kg Tooltrolley 158cm. 10 Drawers workbench with door and rear wall Total dimensions completely complete 186 x 59.5 x 149 cm. Dimensions of only the tool trolley including wheels and handles 186 x 56 x 94.5 cm. Dimensions of the open compartment behind the left door 40 x 52 x 54 cm. Dimensions of the right 4 top drawers 36.5 x 50 x 7 cm. Dimensions of the right 5e drawer 36.5 x 50 x 31.5 cm. Dimensions of the left upper drawer 100 x 50 x 10.5 cm. Dimensions of the left 2nd and 3rd drawer 61.5 x 50 x 7 cm. Dimensions of the left 4th and 5th la 61.5 x 50 x 15 cm. Maximum capacity of the wheels 175 Kg. Per wheel. (Total 1050 Kg.) Maximum capacity per drawer 30 Kg. Own weight Approx. 125 Kg. Packaging dimensions 167 x 66 x 106 cm. The data for this ad was created with ModulMWS - the software solution of LogoT ...

Manufacturer: Arburg Type: 270 S 250 - 150 Year of construction: 1997 Control: Selogica Closing type: Hydraulic Closing force: 250 kN Tie bar spacing: 270 mm x 270 mm Plate size: 400 mm x 400 mm Tool height: min 200 mm Opening distance: 275 mm Plate spacing max.: 475 mm Screw: 25 mm Lifting volume: 54 ccm / 45 gram PS Injection pressure: 2500 bar general Engine: 11 kW Heating: 4.8 kW Dimensions: 3.2 m x 1 m x 1.6 m Weight: 2100 kg Screen text: German Optional extras Core train x2 Robot interface Air valve Sorting flap

Key data: 1500 , 210 , 40

Manufacturer: Demag Type: 150/475 - 440 concept Year of construction: 1999 Control: NC 4 Control Locking type: Knee lever Closing force: 1500 kN Tie bar spacing: 475 mm x 450 mm Plate size: 690 mm x 660 mm WZ Installation height: min 230 max 460 mm Opening distance: 450 mm Plate spacing max: 910 mm Screw: 40 mm Lifting volume: 231 ccm / 210 gram PS Injection pressure: 1855 bar general Engine: 22 kW Heater: 11.7 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 6600 kg Screen text: German Optional extras Core train: x1 central lubrication Air valve Robot interface

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

thickness of jaw: 150 mm max. clamping width: 190 mm weight of the machine ca.: 16,5 Kg dimensions: 420 x 155 x 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle diameter 3,000 mm Turnerable diameter 3,200 mm Maximum workable height 2,000 mm Weight allowed over spindle 40 ton Pump engine power 63 kW Spindle rotation speed 0.66-62 RPM Machine weight 86,000 kg Dimensions 9.345x5.120x6.030 mm

pressure: 1,5 kN stroke: 40 mm throat: 70 mm Working height from to: 75 - 170 mm table surface area: 115 x 70 mm weight of the machine ca.: 11 Kg dimensions: 115 x 175 x 290 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: -- kN injection volume: 230 cm³ screw diameter: 40 mm platen size: 475 x 475 mm Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0060 Brand: SAOMAD Model: UTP 150/6 - CE Standard Tenoning machine for wooden frames, doors - CE Standard Technical data: Circular saw unit: Blade diameter mm 400 F30 - Motor Hp 4 - Cutting height mm 125 - Horizontal shifting mm 150 Cutterhead unit: Cutterheads lenght mm 150 - Max opening between cutterheads mm 185 - Cutterheads diameter mm 160 - Motor Hp 3 - Horizontal cutterheads adjustment shaft tenoning unit: Shaft diameter mm 35 - Useful working length mm 160 - Motor Hp 5,5 - Vertical and horizontal adjustment - Max tool diameter mm 320 Manual tilting tenoning carriage mm 600 x 600 Pneumatic workpiece holders Inclinable graduated fence +/- 45° Sliding safety guards N° 3 suction ports diameter mm 140 N° 1 suction port diameter mm 80 Compressed air 6 atm Overall dimensions mm 3550 x 1400 x 1600 h

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation - automatic CNC – controlled double-sided pre-bending - Conical bending device - three hydraulically driven rollers (one hydraulic motor per roller) - hydraulic linear under-roll adjustment - hard chrome-plated piston rods - hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics - Central lubrication system

--> powder scale.

width of the strips: 150 mm band length: 2000 mm band speed: 30 m/min grinding range: 150 x 540 mm voltage: 400 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 110 Kg dimensions of the machine ca.: 1x0,5x1 m Art.-No.16680 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: 2.000 x 1.300 x 1.800 mm machine weight: 1.500 kg power capacity: ca. 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 120 KW, 150 kVA, 400 V

MODEL: EQ-D150120 ENGINE: Deutz BF6M1013EC G1 FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 150(kVA) / 120(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 2200kg DIMENSIONS L/W/HEIGHT (MM): 280011501600 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry  ...

x-travel: unbek. mm y-travel: unbek. mm z-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: unbkt l coolant: unbkt pressure: unbkt t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UF 150070301 MD PVD sputtering machine was built in 2015 in China by LONGKOU BITE VACCUM TECHNOLOGY CO., LTD. This extremely high-tech machine is used in the vacuum coating process. The technological vacuum combined with the high voltage inside a chamber causes the expulsion of metal atoms from the target (evaporation material), which are then deposited on the surface of the workpieces. Workpieces treated in this way are characterised by a ″metallic effect″ with high resistance to abrasion and chemical agents. The offered LKBT magnetron sputtering machine has the necessary equipment, i.e. a high-vacuum diffusion pump, compressor and RITTAL chiller. It is also possible to purchase new titanium targets (20 pcs.), chrome targets (4-5 pcs.) and TiAl alloy targets (3-6 pcs.) for an additional charge. The price for a single piece is 1200 PLN. Technical specifications of the UF 150070 ...

The RB135 and RB 150 are wheeled excavators engineered for high-efficiency digging and utility work in urban and semi-urban environments. Operating Weight: 15,000 kg or 13,500 kg Engine Options: Kubota V5009-T or Yuchai YC4D115 (EURO V) Power Output: Up to 157 HP (Kubota) or Up to 115 HP (Yuchai) Max Torque: Approx. 600 Nm at 1500 rpm (Kubota) or Approx. 380 Nm at 1700–2000 rpm (Yuchai) Displacement: 5.0 L (Kubota) / 4.2 L (Yuchai) Hydraulic Pump: Kawasaki PNM variable axial piston pump Hydraulic Valve: Parker high-performance control valve Swing Engine: Sunjin (South Korea) Tires: 9.00-20 industrial-grade tires Controls: Hydraulic-electric joysticks Cabin: Enclosed with heating, ventilation, and ergonomic seating Hydraulic Flow: High-capacity system for powerful attachments Max Travel Speed: Up to 30 km/h Max Digging Depth: Approx. 4,750 mm (d ...

length: 300 mm width: 150 mm height: 90 mm voltage: 24 V weight of the machine ca.: t dimensions of the machine ca.: m Power connection 24V / 2,8 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 440 mm turning length: 1500 mm control: C 200 Tool changer: 16 3 jaw chuck Forckrath: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tetra Pak A3 Flex 1500ml Gemina TGA Filling Line For Sale Item #: Usm-141 Category Tetra Pak A3 CF/Flex Tetra Pak A3 Flex 1500ml Gemina Filling Line For Sale Filling machine Tetra Pak A3/Flex TGA1500Sq, in set with accessories, and Headspace by Injection kit, Year of manufacturing 2009 & Working hours 2427 Cap Applicator CAP 30/Flex, with HeliCap27 kit, Year of manufacturing 2008 & working hours 2631 Accumulation system ACHX-0400, Year of manufacturing 2008 & working hours 2404 Cardboard Packer TCBP70, Year of manufacturing 2003 & Working hours 8654 Set of conveyors TPC23 (35 meters with 3 drives) and spare parts for connection of components of the filling line, with dry lubrication system Line Controller LC 30, Year of manufacturing 2008 Condition: The line is currently in Production, Technical inspection can be arranged on request.Overall conditions of Equipment: Good.

The JMC 150 has a mechanically adjustable hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. The JMC 150 is a tabletop unit for easy handling. Manufacturer: Mc Intyre Knife length: 150 mm Measuring opening: 105 mm Cutting capacity: 25 tons Round iron ST 37: 25 mm diameter Number of strokes at 1/4 aperture: 20 / min Number of strokes at 1/2 opening: 12 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal

turning diameter over bed: 560 mm turning diameter over slide rest: 355 mm turning length: 1500 mm spindle bore: 80 mm spindle turning speed range: 25 - 1600 U/min turning dia. in gap: 785 mm metric threading: 0,2 - 14 mm thread - inch: 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 130 mm quill stroke: 120 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,8 x 1,20 x 1,5 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 jaw chuck 4 jaw  ...

roll diameter: 560 mm roll length: 1500 mm rolls drilled: Peripher Nip adjustment: hyraulisch 0 total power requirement: 150 kW Condition: used, completely overhauled, with warranty Specification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine - roll diameter: 560 mm - roll length: 1500 mm - model: Duplocom / pluridrive - Peripherally drilled rollers for water cooling - Cardan joints between gearbox and rollers - Individual drive for the rollers, for variable friction - hydr. gap adjustment - Hydraulic unit - Tilting steel guide plates - rollers mounted on roller bearings with appropriate lubrication - rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit - One gearbox - two individual drives, each with: 2x 75 kW - 400 V - 50 Hz - two new frequency conv ...

: 0554 mm : 2000 mm : : 277 mm : 104 mm : 400 mm : 2000 U/min : D1-11 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic injectors, buffer tank 678 ltr., built-in P3 circulation pump on the intake side and winter control (condenser pressure control -20°C). Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 79.48 Max. Current (A) 142.2 Starting Current Circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200374246 Ye ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic injectors, buffer tank 678 ltr., built-in P3 circulation pump on the intake side and winter control (condenser pressure control -20°C). Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 79.48 Max. Current (A) 142.2 Starting Current Circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200374246 Ye ...

press capacity: 148 to material: Hartmetallstangen quality: Extrusionspressvorgang 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.