15 mw used for sale

Refurbished overpressure valves are offered. The blow-off pressure can be preset according to your specifications.

Chiller Green Box Multi 156A 2006 year probably damaged evaporator // controller - o.k. // three compressors - o.k. // one compressor probably dameged Weight - 4000 kg

FIBROTOR rotary indexing table ER15, ER.15.0410.1.152.12.0.0.0, Fibro, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. Technical data - SEW Eurodrive worm gear motor SA57 DR63M4/BR/TF, N=1320/35/min., i=38,23, 0,18KW, 230/400V, incl. brake 400V, - FIBROTOR rotary indexing table ER15, ER.15.0410.1.152.12.0.0, Fibro, - pitch 12, direction of rotation left u right, - All technical details see photos Attention: We also have the mechanically machined rotary table top made of aluminium D1800mm x 25mm thick, we are happy to offer this to you. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. ...

FOR SALE ALFA LAVAL PURIFIER PU 150 COMPLETE UNIT AT TURKEY HAVE A GDY SIR; WE VE COMPLETE USED ALFA LAVAL PU 150 PURIFIER UNIT PURIFIER WORKED IN VERY LESS HRS. TESTED IN WORKING CONDATION.. PU 150 PURIFIER UNIT SER NO. 107338/2009 YOB 2009 440V 60 Hz P 150 SEPARATOR SERIAL No. 4173737 440 V 60 HZ MOY 2008 MADE IN SWEEDEN SEPARTOR BOWL IN VERY GOOD CONDATION. SYSTEM READY TO USE. IF YOU'VE ANY QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 aliagamarine.com TURKEY

PVS 150 V Multicut with 15 to 22 KW with combinable cutting systems Rotor/ stator non-contact Hole disc with knife head or rotor/stator with perforated disc system 2 cutting stages

Waste oil collection tank 950 litres approved for liquids of hazard class AI-III With test certificates State: Technically deficialy Optical: According to age

Claw vacuum pump dry Manufacturer: Busch Type: Mink MM 1502 AV Motor: DS 400V suction power: 500 m3/h Final pressure: approx. 200 mbar (abs.) Zubehoer: Operating instructions delivery time: by arrangement; ready for use

<b>Technical data:</b> Manufacturers; Interroll Condition: Good (Used) Max Payload: 50Kg Belt speed: 1.0 m/s Stroke time: 0.3s Rated voltage: 24V/48V Drive motor and lifting motor Control: Multi Control 6 pieces in stock <b>Tailor-made solutions for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopic telescopic applications for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics  ...

CATALOG NO. 7176 TECHNICAL DATA - loading hopper inlet 1050x600mm - outlet for chipped wood, diameter 160 mm - rotor working width 590mm - main engine 18.5kW - pump motor 0.75kW - number of knives 14 pcs - knife dimensions 30x30mm - 10x12mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1900x1200x1530mm - weight 990 kg ADVANTAGES – autoreverse – German production – unpainted – like WEIMA WL4 – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 48900 PLN Net price: 10867 EUR depending on the price 4.50 EUR Net price: 12868 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulde ...

NNP Stainless vacuum tumbler, 1500Kg capacity, forward / reverse, with timer, two stainless lids, 3Ph

YANMAR 6SHL-ET - 610 HP 1500 RPM SN 1319 FJG RUNNER EXCELLENT CONDITION VIDEO OF RUNNING AVAILABLE ON REQUEST

Lift tipper Kemper HK 150 height 330cm -for Kemper Kessel or with stage for Diosna Kessel -Height 330cm -400 volts

GEARBOX INFO Listing ID 20103 Make REINTJES Model WAV 500 B Serial No. 46816 Power 588 KW RPM 1900 RPM REDUCTION 5.158:1 General Info Condition Runner Application Marine Weight (kg) 1355 KG

Te koop Endress + Hauser Flowmeter Type: Promass 80F DN 150 Serial number: 7A00BE02000 Inclusief test certificaat Number: 2.05 Voor meer info graag bellen of mailen. email: wh.derikx@gmail.com Tel: +31620758459 De nu kopen prijs is excl. 21%btw

1500Kg capacity, stainless contact parts, discharge through both sides, 3Ph

Stage bracket for Kemper HK 150 lift truck

Stage bracket for Kemper HK 150 lift truck -for lifting and tilting Kemper boilers

Spare parts for raw material shredder Baader 152 (Raw Material Crusher Baader 152). Almost all spare parts are available in stock or at short notice. Alternatively, a new machine can be offered. Please contact us.

Immediately available New ovens - Exhibition e.g. SLS-15o Electric circulating air oven , Horde wagon Inner BHL: 1200x1800x1600 mm Price from 8,900 + freight

Horizontal conveyor belt Axle distance: 5000mm Belt width: 1500mm Speed: 0.015 m/s Belt quality: smooth EP 400/3 Grid frame construction Colour: RAL 5015 Drive 1.1 kW Side guides with PVC thickening

Conveyor belt / belt conveyor Belt width: approx. 300 mm Axle distance: approx. 3,130 mm Drive: 0.75 kW new - only very short in use

Excenter screw pump Manufacturer: Resch Type: 2RBL 150 Built: 1998 Speed: 309 rpm Power: 0.37 kW at 1360 rpm very good condition LWH: 850 x200 x 170 mm Product inlet DM 25 (milk tube fitting) Weight: approx. 15 kg 3 in stock

Centrifugal pump Manufacturer: Alfa-Laval (Sweden) Type: ME-155AE N°: 31452-695 Capacity: 30,000 l/h (water) at 28 m height very good condition LWH: 830 x 300 x 450 mm

Operating pressure: 150 bar, Number of foerders: 42 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Detrunking machines used for cabbage and herb Manufacturer: TURATTI Type 1507-03 Built: 1998 VA stainless steel Dimensions: approx. 4200 x 1200 x 2100 mm

Manufacturer: Busch Type: Mink MI 1502 BV Engine: 9.2 KW ; DS 400V Status: Used, Partial overtaking Performance: 6 months Suction power: 500 m3/h final pressure: approx. 250 mbar (abs.) Geraeusch Level: 85 dBa Zubehoer: additional suction filter (changed) ; Operating manual Delivery time: approx. 1-2 Where.; ready for use

Fit the PVS 125 or 150 mm Reework construction group or simply to fit in the Exchange or replacement for food TEC / Busser / Stephan / Dacia / or similar Reeworkanlagen for the bread / baking / food industry for the production of bread mash or similar products

Manufacturer: Paul Troester Maschinenfabrik/Hannover Year of construction: 1978, machine was in operation until the end of 2015 Screw diameter: 150 mm Length: 16 D (approx. 2,400 mm) Screw speed: 2.5-25 / 4 - 40 U/Min. Centre height of the extruder: 1,100 mm Type of gearbox 3 TH 990 K / 2s, 2 speeds. Gear ratio: = i1 16.5: 1 i2 = 26.4: 1 Maximum gearbox output torque: 45,000 nm Maximum permissible injection pressure: 350 bar without limitation through the extrusion head. The extruder will be overhauled and designed/changed according to customer's specification. Below pictures 1-4 show an extruder overhauled by us.

Manufacturer: Busch Type: Mink MI 1502 BP Engine: 18.5 KW ; DS 400V Status: Used, partial performance: 6 months Volume flow: 500 m3/h compression pressure: +1.2 bar Accessory: additional suction filter (changed) ; Operating manual delivery time: approx. 1-2 Where.; ready for use

XXL Large tire detwulster for OTR tires up to 1600 mm inner diameter! Mobile on rolling frame. Transport with unrolling tipper. Weight approx. 9500 kg, length approx. 6500 mm. Very good condition!

Manufacturer: Mc INTYRE Blade length: 150 mm Blade opening: 105 mm Cutting capacity: 25 tons Rods ST 37: 25 mm diameter Number of strokes at ¼ opening: 20 / min Number of strokes at ½ opening: 12 / min Number of strokes at full aperture: 9 / min Dimensions (L x W x H): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Control: foot pedal

We can offer a complete French fries production line which manufactured by K&K,Netherlands in 2012, capacity is 1500kg/h. stopped,working condition, serious buyer cOntact us.

1 used cylinder head for Kubota V 1505 T. no obvious damage. Sale is for recovery without any warranty. Other parts are available. As well as diesel engines 1-6 cyl., various products: Deutz, Daedong, Farymann, Hatz, Iseki, Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Capacity of 4,5-100 kw, used partly as new. Gasoline engines: 1-2 cylinder 3-15 kw B & S, Honda, Kohler, Robin, Wisconsin. Various cooler, starter, alternators, and mufflers in stock, various hydraulic pumps and hydraulic motors.

Built in 1989 Size max 320 x 400 mm Size trimmed max 305 x 380 mm Size trimmed 100 x 125 mm Product thickness max 80 mm min 6 mm Speed max 6.000 c/h Feeding height max 80 mm Equipment o infeed from the right side o automatic infeed with integrated pre stacker o cut counter o Equipment for sheet-fed o 1 set of clamping plates and holders o 3 sets of cutting sticks o 2 set of knives o external knife changing device o central lubrication o belt delivery

Claw vacuum pump Compressing dry Manufacturer: Busch Type: Mink MM 1502 AV Engine: DS 400V Suction capacity: 500 m ³/h Discharge pressure: approx. 200 mbar (abs.) Accessories: inlet filter; Operating instructions Delivery time: Please enquire; ready for operation

For sale: Vamein shut-off valve Fig 115E DN 150 with pneumatic Actreg drive ADA 130 Order number: 7009.1 For more information, please call or send an email. Phone: 06-20758459 Email: wh.derikx@gmail.com The price is plus 21% VAT.

Manufacturer: Bush type: mink MI 1502 BP Motor: 18,5 KW; DS 400V status: used, without Warranty: 6 months Flow rate: 500 m ³/h discharge pressure: + 1,2 bar Accessories: additional intake filter (changed); Manual delivery time: approx. 1-2 where.; ready for operation

Choose a suitable roaster and stay flexible! We can offer various roasters as follows: - Short-term rental of min. 1 year - long-term rental incl. maintenance contract - discounted takeover option after expiry of the contract. - Roaster color can be determined individually. - Roasters are delivered, installed and your staff trained. - Entsteiner, Afterburner and Coffee Loader can also be ordered on request. - and much more! Contact us and find your perfect equipment! We have many ways to meet your exact needs. Get the all-in package and you don't need to spend time in the maintenance etc. of used roasters. Focus on your business and roasting process!

Smicon PT 1500 Fumigation / Fumigation System In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm. It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth) to kill all the bacteria. Former list price 9.900EUR

Make: KÜBA Type: SGK 153 Slats distance 10mm Length: 4200mm Volume: 161.20 l Power approx.80KW at minus 40C foldable with insulated drip fir with 3 fans WOODS, total power 6300 watts for shock frost 2 pieces available Info: 0043-6641838175 or info@frigocom.at Price on request

pressure:15 t stroke:160 mm weight of the machine ca.:330 kg Oil tank capacity:10 l

Qty. 1 Second-hand Powder coil coating line on aluminium strip 1500 mm wide Mfc.: TBA Built: 1991 Coating thickness: 60 microns Revamped by OTEFAL in 2003 Powder booth changed in 2011 – GEMA Coil coater for the pre-treatment changed in 2013 Degreasing section re-built in 2010 – OTEFAL Electrical device changed in 2006 Strip width: 800 - 1500 mm Strip thickness: 0.8 – 2.0 mm A wide range of colors - over 300 different shades Capacity: 9000 tons/year in 3 shifts work 5/7 Days so 2 000 000 m² Spool dia.: 508 or 610 mm Outside coil dia.: 1500 mm Average speed: 7.5 m/min.

Laser cutting machine MAZAK Year of manufacture: 1999 Laser power 1,5 KW CNC MAZATROL Working range: 2500 x 1250 x 100 mm Max sheet dimensions: 2500 x 1250 x 12 mm Cooling system Extraction system Transformer Pneumatic sheet metal clamp Ball support for easier positioning of the plate Technical documentation available

Used dryer Glatt WST 100/150. New 1997. Dismantled. No documentation. 2 pieces available.

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Mondomix BV Niederlande Type: VA 15L year: approx. 1998 output: 150 - 450kg/h Volume 2,1 Liter electrical: 4 kW, 380 V, 50 Hz, 3 ph dimensions: 2410 x 650 x 1750 mm wight: 500kg different: Continuous Aerator We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked

Bainite (India) model BMPX150 PIN type cold feed extruders, Year of manufacture 2013 Screw diameter: 150mm L/D ratio 16:1 Output: 1200 - 1500kg/hr Power roller feed (opening 175mm), provision for cooling, Screw speed: variable max 50rpm, Max operating pressure: 340bar (5000psi) 10 rows of 8 pins (80 total) With 210kW Siemens AC v/s motor through 28:1 reduction gearbox (service factor 1.75) Hinged extrusion head with C'clamp suitable for strip All mounted on a fabricated steel base Complete with electrical controls and VFD (Siemens make). Safety features as per European standards.

150 ton x 4000mm

Key data: 95 , 9

Used Tool-Temp tool temperaturelers, TT-156E, TT-157E, TT-162E. They are wet, 95°C, 9-12 kW.

IWKA Model CP150 Automatic Horizontal bottle Cartoner. Capable of speeds up to 150 cartons per minute. Carton size: (Length) 20mm-90mm, (Width) 15mm-60mm, (Depth) 55mm-180mm. Set up for Reverse tuck style cartons. Has Embosse coding unit , GUK sheetfed leaflet feeder .