127,384 used machines on RESALE, but how to find them? Machine Search
PTC JTR-C Cold Water Trailer similar but no Dynajet, Oertzen, Falch, ROM, Rioned, Karo, ... Bhdwvn8yff - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following cold water models are available: JTR-C 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW JTR-C 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW JTR-C 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW JTR-C 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW JTR-C 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW Engine type: TIER III (Kohler) or Stage V (Yanmar) - Dimensions: 3,370 x 1,640 x 1,540 - Empty weight: approx. 600 kg - High pressure pump: HPP - HD reel: fixed and manual or hydraulic with max. 1/ ...
High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 75/150 | 75l/min. at 150bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 30/300 | 30l/min. at 300bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses XL 75/210 | 75l/min. at 210bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 84/190 | 84l/min. at 190bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 102/150 | 102l/min. at 150bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 50/300 | 50 ...
Bagging filter PAFO 3/3-20/1518 with vibratory motor with Duct bend Channel Non-return valve Duct fitting without fan Year of manufacture 2004 L x W x H: 200 x 70 x 300 cm Weight 350 kg The bagging filter is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
High pressure cleaner PTC Easypower XL D similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Foerder quantity: 13-47 l/min. - Engine: Yanmar Stage V 4-cylinder 4TNV88 diesel 53hp/39.5kW, 2800 rpm - Dimensions: 1,600 x 1,320 x 1,200 - Kerb weight: approx. 740/760 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Available as skid with anti-vibration feet or as a trolly with industrial wheels - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet dues The following models are available: Easy Power XL D 47/400 | 47 l/min. 400 bar Easy Power XL D 38/500 | 38 l/min. 500 bar Easy Power XL D 30/600 | 30 l/min. 600 bar Ea ...
High pressure cleaner PTC Easypower XL E similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Foerder quantity: 13-38 l/min. - Motor: IE3 Electric 63A, 3Ph-400V-50Hz 50HP/37kW, 1450 w-min or IE3 Electric 63A, 3Ph-440V-60Hz 50HP/37kW, 1750 1-min - Dimensions: 1,450 x 900 x 1,050 mm - Empty weight: approx. 450 and 550 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-triangle starter and 10 m. power cable - Safety switch with thermomagnetic relay for motor protection - Main switch, start/stop buttons, emergency stop - Operat ...
This machine can be considered as an ultimate solution for the production of concrete elements providing the one to choose numerous options as an additional upgrade to the machine that can make production even more efficient: Filling box on servo drives Filling boxes both from the coarse mix and face mix powered with 2 servo motors create fast movement back and forth contributing reliable filling of the mould. As for the coarse mix device filling box it is additionally equipped with an agitator (driven by the hydraulic cylinder) for equal and fast filling. Servo vibration Hi-dynamic Servo vibration system transmits power for the high compaction with the just right consumption of electrical power to vibration table consisted of impact and ledge bars and thus providing top-quality paving stones, blocks, curbstones as well as any other products which modern demanding market requires ...
The vertical milling center FADAL VMC 15XTL was manufactured in 2007 in the United States by the FADAL brand. The machining center is digitally controlled by Fadal. It has a table size of 870 x 400 mm. The milling machine is designed for processing materials weighing up to 340 kg. It is equipped with a magazine for 21 tools. The spindle speed of the machining center, on the other hand, reaches 7500 rpm. Technical parameters of the FADAL VMC 15XTL CNC milling machine - CNC control: Fadal - working table length: 400 mm - working table width: 870 mm - maximum table load (evenly distributed): 340 kg - number of tools in the magazine: 21 pcs. - spindle drive power: 5.6 kW - maximum rotary speed of the vertical spindle: 7500 1 / min. - minimum distance between the spindle and the table: 101.6 mm - maximum distance between the spindle and the table: 609.6 mm - travel length in th ...
: 1800 mm efective widths: je 400 mm length in total: 2000 mm length in width: je 500 mm carrying capacity: je 3000 kg material: Aluminium weight: je 33 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer you a new shelf for sale here. Particularities: - Height of the shelves can be individually adjusted - Floors can be hung at an angle (see picture material) - Castors for flexible warehousing - All castors equipped with parking brakes, thus enabling storage on inclined surfaces - Floor frame can be folded up, making room for a Euro pallet - Material surface: high-quality chrome-plated - Suitable for different industries - Easy and uncomplicated installation Technical data and further information: 01x shelf, new composed of: Total height: approx. 1,587 mm Total depth: approx. 855 mm Total width: approx. 1,310 mm Included in delivery are: 01x Floor frame, new Width: approx. 1,310 mm Depth: approx. 855 mm 01x rear wall, new incl. stabilization hooks 04x locking rollers, new incl. Allen key for installation 02x shelves, new Depth: approx. 3 ...
New device incl.pre and combined filters The compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dust and gases - Dimensions 1197 x 600 x 790mm - Suction capacity 1250m³ / hour -400v ph 50/60Hz with red 16A CE plug - Hose connection 125mm Ø - incl. option external start / stop ( with 24V DC via 2-wire cable on the back side ) to activate via micro switch - Warranty 12 months ( filter excluded ) Typical applications : Marking laser Engraving laser Cutting lasers Options: - Suction hose in the necessary length - Connection sleeves - Suction nozzles
Cold water high-pressure cleaner, export version with 60Hz Welcome to the innovative and compact me-Class! The DYNAJET 150me with up to 150 bar working pressure convinces not only with its performance but above all with its compact dimensions and high mobility. This makes the versatile high-pressure cleaner one of the all-rounders in our range. Construction Robust, powder-coated steel frame for optimum machine protection and long service life 1-axle chassis with pneumatic tyres for easy manoeuvring on site Flexibility and support due to perfect center of gravity High durability due to screw connections made of stainless material Splash-resistant (IP54) control cabinet for versatile and smooth use Operating hours counter for optimal post-calculation Drive Manual star/triangle start to protect the power grid Compact and robust industrial electric motor for long service lif ...
Cold water high-pressure cleaner with 7.5 kW power 150 bar pressure and 30 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...
The starting relief and safety valves are available in various sizes.
Cold water high-pressure cleaner with 7.5 kW power 270 bar pressure and 15 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...
Cold water high-pressure cleaner with 2.2 kW power 150 bar pressure and 8 l/min. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): - Hose reel with 15 m hose The imag ...
Small 4-side brushing/grinding machine for small parts. Minimum part length 250 m ! SPECIFICATIONS: Feed belt speed: 3-20 m/min. Spindle diameter: ø 40 mm Length of horizontal spindle shaft: 150 mm Length of vertical spindle shaft: 100 mm Maximum brush diameter: ø 200 mm Spindle speed as standard: 1000 ot/min (possibility of infinitely variable control) Power of the main motors as standard: 4x1.1 kW Power of the motor for the feed of the conveyor belt: 0.55 kW Diameter of the suction nozzle: 2 x ø 120 mm Maximum material height: 100 mm Maximum material width: 150 mm Minimum length: 250 mm (must be advised) Weight of the machine: 450 kg Compact machine with quick adjustment and optional parameters. KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushes, we offer a wide range of machines for every application. Parameter chang ...
SMG DS 315-1500/1300 CNC hydraulic press was manufactured in 1984 in Germany. The machine, consisting of two interconnected stations, is used for pressing metal workpieces in manual, semi-automatic and automatic mode with a pressing force of up to 315 tonnes. All the machine’s machining parameters are set using a CNC control with a full-colour, touchscreen display. The press is equipped with a hydraulic and pneumatic sheet metal feeder, servo drives for feed rollers to set a very precise stroke of up to 0.1 mm, safety cages and workpiece feed and drop control sensors. The SMG 315 T machine underwent a complete overhaul in 2007, during which components such as pumps and safety installations were replaced. Technical data of the SMG DS 315-1500/1300 press - maximum press force: 315 t - working table dimensions (L x W): 1500 x 1300 mm - upper machine point (from the table): 750 mm ...
Precision ball screw, D50mm, 1520mm, Rexroth, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, D50 mm, 1520 mm, Fa. Rexroth, Ball screw diameter 50 mm, Pitch 20 mm, Length of thread 1370 mm Length of ball screw nut 215 mm, Max. total stroke 1155 mm, Total length of the spindle 1520 mm Diameter for coupling with motor 24 mm Diameter bearing seat A 40 mm, Diameter bearing seat B 42 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If ...
Precision ball screw, D50mm x 10, 1570mm, IBL, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 050-10-65-1187-628, D50 mm, 1570 mm, Fa. IBL, Ball screw diameter 50 mm, Pitch 10 mm, Length of thread 1187 mm Length of ball screw nut 182 mm, Max. total stroke 1005 mm, Total length of the spindle 1570 mm Diameter for coupling with motor 25 mm Diameter bearing seat A 40 mm, Diameter bearing seat B 40 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a fun ...
Precision roller screw, RGTB 48.25.1500/2052, GSA AG, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Roller screw, type RGTB 48.25.1500/2052 R Kl.10 2AB, GSA (Gewinde Ziegler AG Switzerland) Roller thread diameter 48 mm, Lead 25 mm, Thread length 1500 mm Length of roller thread nut 113 mm, Max. Total stroke 1387 mm, Total length of spindle 2052 mm Diameter for coupling with motor 35 mm Diameter bearing seat A 40 mm, diameter bearing seat B 40 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand pa ...
Size max 500 x 320 x 80 mm Speed max 16.000 c/h ; working condition
2x Deutz MWM gas generator set 150 kVA --> 2 identical devices available (price per piece) - - - - - Engine: - Deutz / MWM (Germany) - Model: G234 V12 - 12 cylinders - Gas (natural gas) -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: AvK (A.van Kaick, Germany) - 150 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition: -Used - The devices come from a waterworks and were installed there for emergency power protection / for occasional use - The motors were cooled by an external cooling circuit - - - - - Transport: - A Germany-wide transport is possible for an extra charge - In order to be able to quote an exact freight price, please send us an inquiry with your postal code - - - - - Price and payment: - Price: 6500,- € + 19 % VAT = 7735,- € (per piece) - Payment: Prepayment - An invoice with VAT is issued - - - - - Ot ...
Machine Details Stock-No. 1105-03860 Type of machine CNC Lathe Make MORI SEIKI Type SL 150 Year of manufacture 1996 Type of control CNC Storage location Warehouse Country of origin Japan Delivery time immediately Freight basis ex Warehouse, free on truck Price Technical details turning diameter 420 mm centre distance 580 mm Turning length max. 500 mm Travel X / Y 230 / 520 mm spindle turning speed range 50 - 5000 rpm spindle nose JIS A2-5 bar diameter round max 42 mm spindle bearing diameter 90 mm tool turret - number of stations 12 (12) Tool Taper 20 x 20 tailstock adjustment 515 mm tailstock quill diameter 85 mm tailstock quill taper MT 4 tailstock travel 120 mm Rapid Travel - Longitudinal/Face 24 / 18 m/min Coolant Tank 160 L connected load 21 kVA Weight of the machine approx. 4.1 t dimensions of the machine approx. 7.5 x 2.5 x 1.8 m Additional infor ...
Plansifter MIAG LM 655-155- Maize run, six passages, cleaned Broken frame inserts have been repaired. Good working condition. We also offer a similar machine with nine passages.
Mower containers and mulchers Working width 1.50 m, 3-point attachment cat. I/II, for PTO 540 rpm. Capacity approx. 2500 ltr. Equipment: Height-adjustable front wheels, support roller, height-adjustable rear landing gear. (3 hydraulic connections required (dw/ew). Lighting system according to StVZO. For mowing and/or scarifying (scarifying knife optional required) of grassy areas. The mown material - including horse droppings and leaves - can be picked up and then transported away at the same time. Required tractor power: 26 kw / 35 hp. High stability during the tipping process and problem-free road transport due to rear landing gear. Emptying height max. approx. 2.20 m (factory specifications). Age-related wear and tear and paint defects/rust present, but still operational. Alternatively, we also offer Reiser mowing containers with a working width of 1.30 or 1.50 m as well as a W ...
TACCHELLA ELEKTRA 1518 MPC CNC grinding machine was built in Italy in 1999. Characterised by high reliability and performance, the machine is used in the process of highly accurate grinding of the external rotating surfaces of workpieces with a maximum length of 1500 mm and a diameter of 350 mm. The TACCHELLA CNC shaft grinding machine has a large workspace with tailstock, grinding wheel spindle and workpiece spindle. After placing a shaft with a maximum weight of 50 kg in the spindle holder, the workpiece is ground at high speed by an incremental encoder driven grinding wheel with a maximum diameter of 450 mm. In order to simplify the machining process, the ELEKTRA 1518 MPC CNC grinding machine is equipped with state-of-the-art features, such as the HOFLER BALANCE SYSTEMS VM 24 operator panel and a functional and user-friendly FAGOR CNC controller, which allows full control of the m ...
Machine type: TIG inverter welding system gas-cooled direct current system Make Eurotronic Type TIG 1501 - DCi Connection voltage 1 x 230 volts Setting range 5 – 150 amps Duty cycle 35 % d.c. at 150 amps 60% d.c. at 120 amps 100% d.c. at 100 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly line design Fuse 16 amps Dimensions L x W x H 400 x 170 x 250 mm Weight 9 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece ME-TIG burner TH 161 G, 4 m 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 12 Months Warranty 1 Piece Instruction Manu ...
Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-A-CV-150 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
INDRAMAT Spindle Drive Module RAC3.1-150-460-A00-W1-220 Bosch Rexroth
Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-A-CVE-150 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Rühle Tumbler MKR 150, with vacuum, mixing- and scraping arm, container size 150 liters, adjustable Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 50 rounds per minute, all stainless steel, comfortable emptying of the goods by standard carriage size. You are very welcome to test the machine in our facility in Koblenz, Germany.
Round table FERGUSON Pt182RH15752 - see pictures
Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-B-CV-150 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
x/y/z = 500/360/400 mm, max. 4000 rpm, 4 clamping corner, 1 pushbutton, various shots, cabinet Lista
Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CV-150 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...
Spare welding controllers for resistance welding machines also available: MPS 1033 MPS 1036 MPS 15033 MPS 15036 MPS 15043
This ploughshare / inclined bucket mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Machine name: Ploughshare / Inclined bucket mixer Manafacture: MAP Type: WBHP 15000 Year of construction: 2013 Hours: Zero Material: Mild steel S235J Drive motor: Here you can choose between 160 kW, 200 kW and 250 kW Designation: Single-shaft horizontal mixer Design: Batch mixer Usable volume: 4,500 - 10,500 litres Equipment tools: Plowshares (screwed) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Empty weight: weight 8000 kg Tech. Documentation: Yes Note: Since the tools are screwed, it can be used both as a ploughshare mixer and as an inclined bucket mixer. This horizontal mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Condition: New and workshop overhauled Price: On request
Rühle Miknetum MGR 1500, newest generation of Tumbler, year of construction 2008, with vacuum, mixing arm, container size 1500 liters, filling size 900 Liters, intelligent Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, feed spindle as loading device, comfortable emptying of the goods by standard carriage size. You are very welcome to see the machine at our facility in 56070 Koblenz, Germany.
RECON Part number: AA302180A ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Complete gear, from scrapped vessel. 2 pc on stock. All parts on stock for overhaul of this gear type.
RECON ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
RECON Part number: A308023 LB ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
maximum number of results exceeded
please refine your search
