15 mw used for sale

Description: 10 x Street light 150W with sensor - SMD LED waterproof IP65 - 6500K/white, Diameter 676mm 300mm 110mm, SMD LED - voltage 85-265V 50/60Hz, 15,000 Lumen, lifetime 30,000 hours, Fixing diameter: Ø60mm, Kit of mount not included, Beam angle: 120 degrees with lens, Suitable for Indoor and outdoor. Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 850 mm, weight approx.: 40 kg

Description: Recessed Panel 15W LED COB round 3000K warm white - 1350 lumen - dim. 180mm x 32mm - LED SMD (AC220-240V) 50 / 60Hz - LED driver included - lifespan 30,000 hours - beam angle: 120 degrees. Approx. Onsite Dimension. (l x w x h): 730 x 360 x 1,200 mm, weight approx.: 70 kg

Description: Recessed Panel 15W LED COB round 6500K cold white - 1350 lumen - dim. 180mm x 32mm - LED SMD (AC220-240V) 50 / 60Hz - LED driver included - lifespan 30,000 hours - beam angle: 120 degrees. Approx. Onsite Dimension. (l x w x h): 730 x 360 x 1,200 mm, weight approx.: 70 kg

Description: Composed of: N°4 reels including one reel of total capacity 1025 meters, two reels of total capacity 250 meters and one reel of total capacity 1000 meters. We do not guarantee the completeness of the reels (assumed capacities) Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 600 mm, weight approx.: 50 kg

Overview of the equipment of a sorting plant, year of construction 2009, extension 2015, with a sorting capacity of 25,000 t/year For sale is a complete sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components: 1 piece feeding / dosing bunker with hydraulic moving floor and dosing drum, manufacturer Hartner, type Storage HAT 1 piece 3-deck ballistic separator, manufacturer Hartner, type Paper Sort 2 pieces overband magnetic separators, manufacturer IFE, type MEQL 1401 S-PS 2 pieces cascade screens (vibrating screens), manufacturer IFE, type SM 2400 x 5000 F - UW30 2 pieces TiTech Autosort, manufacturer TOMRA Sorting GmbH, type TITECH AutoSort 4 (NIR1-VIS) (S-2800) (X-L), incl. accelerating belts 1 piece sorting cabin with filter system, air-conditioned (heated), with 3 sorting belts and 10 sorting stations 1 piece ventil ...

Coffee table chrome/smoked glass approx. 150x80x40h cm, 6 chairs tubular steel/imitation leather, wall mirror, wall coat rack chrome

Description: Workbench with drawer block Dimensions of the entire drawer unit 66 x 40 x 35 cm. Dimensions of the individual drawers 59 x 35 x 4 cm. Length 1560 mm Width 760 mm Height above floor 880 - 920 mm Weight 70 kg weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 500 mm

Description: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 530 x 400 x 750 mm, weight approx.: 82 kg

Description: Pressure 5000 Kg (150x200 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 200 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 480 x 200 x 180 mm, weight approx.: 32 kg

Description: Pressure 5000 Kg (150x300 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 300 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 580 x 200 x 195 mm, weight approx.: 36 kg

Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (150x175 mm, h 50 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 450 x 180 x 150 mm, weight approx.: 26 kg

Description: Professional tool cart / workbench Included as standard. 4 x 150 mm. Heavy duty rollers of 2 with brake. 2 x Robust solid steel handle. 2 x separate locks for drawers and doors. 9 x compartment divider in the top drawer. (18 compartments can be created with it become) 4 x tray blue in the right second drawer. Door with magnetic closure. Anti-slip mat in each compartment. Very nice solid wood panel. Fixed ball bearing guides. (Double bearing) All drawers can be opened 100%. Dimensions including wheels and handgrips 170 x 48.5 x 95 cm. Total dimensions without wheels and handles 152 x 48.5 x 76 cm. Internal dimensions of the upper drawer 1390 x 360 x 60 mm. Interior dimensions of the right second la 910 x 380 x 90 cm. Internal dimensions of the left 2nd, 3rd and 4th la 440 x 380 x 90 mm. Interior dimensions of the left fifth la 440 x 380 x 210 mm. Interior dimensions of the sh ...

Description: The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, one of them with a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning fitted. Height-adjustable storage compartment behind the door. Central locking with 2 keys. Tool trolley is equipped with 155 pieces of tool parts: 3 pcs. Socket sets: 1/4 ', 3/8', 1/2 '. Ratchet ring spanner set from 6 - 22mm, Extension for socket sets, different allen keys from 1 - 10mm, Various screwdriver sets. Pliers assortment. Approx. Onsite Dimension. (l x w x h): 780 x 480 x 1,050 mm, weight approx.: 78,5 kg

Description: Workbench with: - 40 mm MFD wooden board - 4 pcs. Adjustable feet Length 1524 mm Width 650 mm Height above floor 885 mm Table load max. 1000 kg Approx. Onsite Dimension. (l x w x h): 1,530 x 650 x 880 mm, weight approx.: 62 kg

Description: Power 1.5 kW, water cooling, wavelength 1070 nm, cleaning width 50 mm, power supply 220 V. 1. Metal surface rust removal/carbon steel rust removal/weld seam cleaning/metal surface paint removal/steel pipe paint removal/aluminum plate surface cleaning oxide film, , 2. Laser cleaning technology refers to the use of high-frequency high-energy laser pulses to irradiate the surface of the workpiece, The coating layer can instantly absorb the focused laser energy, causing the surface oil stains, rust spots or coatings to evaporate or peel off instantly. It is a high-speed and effective cleaning method for removing surface attachments or surface coatings, and the laser pulse with a short action time, Will not harm metal substrates under proper parameters. Laser cleaning is a new technology based on the interaction effect between laser and matter. Different from traditional mech ...

Description: Power 1.5 kW, water cooling, 220V power supply. 1. Laser metal welding, the basic welding seam is beautiful and fast, the operation is easy to learn, the welding is firm, and the sealing is good, 2. The portable air-cooled handheld laser welding machine adopts an integrated integrated fiber laser and is equipped with a self-developed wobble welding head. The high-tech air-cooled heat dissipation system fills the new application of hand-held welding in the laser equipment industry. It has multiple advantages such as simple operation, beautiful weld seam, fast welding speed, small size and convenient transportation. It is suitable for welding thin stainless steel plates, iron plates, and galvanized plates. , aluminum alloy and other metal materials, it can perfectly replace traditional argon arc welding, electric welding and other processes. It can be widely used in complex an ...

Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (150x200 mm, h 50 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 370 x 180 x 140 mm, weight approx.: 22 kg

Irinox blast chiller, model: HC 202/150, number: 040500088, 400 V, 3 Ph, 50/60 Hz, 7.5 A, 3 kW, refrigerant: R404A, inside dimensions: 770 mm x 800 mm x 1900 mm, total dimensions: 1440 mm x 1220 mm x 2500 mm. Including s/s trolley, 20 floors, floor dimensions: (20x) 530 mm x 650 mm, total dimensions: 710 mm x 850 mm x 1850 mm and Irinox condensing unit, dimensions: 1320 mm x 800 mm x 1460 mm.

Lubron reverse osmose system, type: OSMOSTAR 1500, serial number: 36945, year of construction: 2003, dimensions: 600 mm x 800 mm x 1700 mm, plastic storage tank, dimensions: 600 mm x 800 mm x 1450 mm and 2 Grundfos centrifugal pumps, capacity: 2.5 m³ per hour, dimensions: 600 mm x 700 mm x 1250 mm.

Air Tank Working Pressure 10 Bar More then 300 machines new and second hand on our seema .de

RECON Standard size part number: 1230 2056 = 1507 7534 incl. counterweights ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us

RECON Standard size Part number 1213 5136 incl. counterweights ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us

We are offering original spark plugs for engines CAT/MWM TCG 2020 minimal order is for 10 pieces for 432 EUR/piece for Biogas engine spark plugs, and 488 EUR/piece for Naturalgas engine spark plugs.

Used marine engine DEUTZ MWM TD 602 V16 Power 875 hp Speed 1500 1/min We have more ship spare parts in stock

Key data: 750 , 400

(Deutz) MWM2016 V16 Natural Gas Generator Set. Model: (Deutz) MWM2016 V16 Fuel: Natural Gas Year: 2007 Hours: 40,460 Capacity: 750 kW Hz: 50 Voltage: 400 V Scope of supply: Complete containerised genset including Engine, Marelli Generator, Frame, Control System, Gas Line, Radiator, Gas Filter and other accessories . Complete contarised genset. Very good condition. Turnkey ready to run now. A new crank was installed on 35,000 hrs. Available for Sale Now.

Biomass Plant, 5 MWel, 50 Hz, yoc 2002, in operation Boiler • Technical data: - Fuel tank capacity: approx. 1 .300 m 3 - Exhaust gas volume 29,000 Nm3/h - Average combustion temperature of 900°C (850 for 2 s.) - Thermal power of the furnace 13 MW - 2 add. Burners 5 MW each - Average calorific value Hu 12,500 kJ/kg - Throughput capacity 3,991 kg/h - Boiler working pressure 41 bar - Superheated steam temperature 420°C - designed amount of steam 14 t/h - Fuels: RDF, wood chips, straw, remains of chipboard, choiceed waste Hours of operation of the entire plant appr. 120,000 hours Steam turbine - TWIN steam turbine KKK, type: CFR 3 / AFA 6 GTA - Generator AvK, type DIG 140 k/4W - Gearbox Renk, type: ELCO W-shape can be inspected in operation this week, - SGS can be ordered for inspection.

Flour scale BÜHLER MWBL EE in different sizes from 24 to 170 Sumtronic II MWEE Spout containers All machines checked and in good condititon.

Many thanks for your interest on our new machines, please find follow our offer: manufacturer: Bauermeister Type: MWA 21 Mandelwaschanlage / almonds cleaning machine Year of manufacturing : 1981 Output 500kg/h Enginepower: 0,75kw dimensions: 3000x900x1500 electrical: 380 V We offer this machine in as-is where it is condition, without warranty, ex warehouse/location (Incoterms EXW), without packaging

Alfa-laval plate cooler typ. M6-MWFDR

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed, and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 150 liters (mixing capacity depending on meat up to 100 kg) Worm, worm housing, and closing are completely stainless Delivery time: after advanced payment machine is generally refurbished and ready for delivery

Automaton mixer grinder KOLBE MW52 – 120 Specifications: Type: MW52 – 120 400 volts / 50 Hz / 15.2 + 2.8 A / 7.5 + 1.1 kW Year of construction 2019 Perforated discs diameter 130 mm Cutting system: Enterprise E 52 Hopper capacity: 120 L Conveying capacity: approx. 2000 Kg/h with mixing device Total dimensions: W/H/D 92.3 x 135 x 135 cm Weight: 560 kg Equipment: One speed for working screw and mixer Stand, funnel, wolf housing, screw and mixing blades made of stainless steel Locking nut stainless Combi hook wrench Housing spout protective cover Push button switch Connection cable with CEE phase plug Machine mobile with 2 swivel castors and 2 fixed castors Original price meat grinder in this version: approx. EUR 30.000,- Function checked, condition & accessories see original pictures.

Automaton mixer grinder KOLBE MW52 – 120 Specifications: Type: MW52 – 120 400 volts / 50 Hz / 15.2 + 2.8 A / 7.5 + 1.1 kW Year of construction 2018 Perforated discs diameter 130 mm Cutting system: Enterprise E 52 Hopper capacity: 120 L Conveying capacity: approx. 2000 Kg/h with mixing device Total dimensions: W/H/D 92.3 x 135 x 135 cm Weight: 560 kg Equipment: One speed for working screw and mixer Stand, funnel, wolf housing, screw and mixing blades made of stainless steel Locking nut stainless Combi hook wrench Housing spout protective cover Push button switch Connection cable with CEE phase plug Machine mobile with 2 swivel castors and 2 fixed castors Original price meat grinder in this version: approx. EUR 30.000,- Function checked, condition & accessories see original pictures.

Automatic mixing grinder, meat grinder, mixed meat grinder Capacity approx. 2000kg/h Hopper volume: 120l incl. mixing device incl. perforated disc with 4-blade knife

Process chiller / chiller air-cooled, Type: Aries TECH AST2 190 HE-MWT (Special) M.T.A. S.p.A. The Aries TECH AST2 190 HE-MWT are compact chilled water chillers suitable for outdoor installation (from -20°C to +48°C) with shell-and-tube evaporator, six scroll compressors, compressor shut-off valves, crank pan heating, phase monitoring, P3 double pump, tank 800 litres, electric antifreeze heating, EC fans, condenser filter and control and switch cabinet. Cold water outlet temperatures from -10°C to +20°C can be adjusted. Cooling capacity (kW): 539 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 92.1 Available. Pump pressure (bar): 3.4 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Number of refrigeration circuits: 2 Total number of compressors: 6 Power levels (levels): 6 Electrical data: Voltage V 400, Frequency 50 ...

Process chiller / chiller air-cooled, Type: Aries TECH AST2 190 HE-MWT (Special) M.T.A. S.p.A. The Aries TECH AST2 190 HE-MWT are compact chilled water chillers suitable for outdoor installation (from -20°C to +48°C) with shell-and-tube evaporator, six scroll compressors, compressor shut-off valves, crank pan heating, phase monitoring, P3 double pump, tank 800 litres, electric antifreeze heating, EC fans, condenser filter and control and switch cabinet. Cold water outlet temperatures from -10°C to +20°C can be adjusted. Cooling capacity (kW): 539 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 92.1 Available. Pump pressure (bar): 3.4 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Number of refrigeration circuits: 2 Total number of compressors: 6 Power levels (levels): 6 Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max ...

Large fruit washer Manufacturer UNIMASZ Model MWP-3F-RA

- CNC : Fanuc 32 - Number of axes : 4 - Number of spindles : 2 - Number of turrets : 2 - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 45 - 4.500 [rpm] - Max. chuck diameter : 165 [mm] - Number of Turret positions : 2 X 8 - X/Z stroke : 130 / 145 [mm] - Machine floor space : 3.800 x 1.875 [mm] - Machine height : 2.420 [mm] - Machine weight : 4.400 [kg] - Interface : USB / PCMCIA - Tool monitoring - Coolant tank - Chip conveyor - Workpiece loading robot : 1 - Max. workpiece weight : 2x 3,0 [kg] - Max. workpiece diameter : 120 [mm]

Automatic double wheel reel suitable for pipes from 10-32 mm OD Manufacturer: NEXTROM /Maillefer Type: MWB 1300G Year of construction: 1998 Condition: "as it is", ready for operation.

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending of meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment

Grinder with mixer Kolbe MWE 32 , Capacity: 1300kg/h Electrical power: 6.5kW Dimensions: 80x130x130cm

New Neu Anlasser / Bosch Starter 0001601007 Passend für die Motoren DEUTZ / MWM / Caterpillar Energy Solutions Typ TBG 620(k) und TCG 2020.

Kolbe MWE32 Mixed Meat Grinder completely made of stainless steel, screw, screw housing and union nut made of special alloy smooth running Wheeled on wheels Machine should be thoroughly cleaned before use Video about test run available

Kolbe MWE98 Mixed Meat Grinder complete in stainless steel, auger, auger housing and union nut made of special alloy Smooth running Mobile on castors Machine should be thoroughly cleaned before use B98 5-Piece Under Cutting System! Video about test run available

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve -Manufacturer: Alco, thermo-valve upper part unused in original packaging -Type: XB 1019 MW55-1B/PCN 803379 -Operating range: +10 to -30 °C -Price: per piece -Number: 7 piece -Dimensions package: 120/120/H160 mm -Weight: 0.7 kg/piece

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Migatronic, inert gas welding machine MIG-MAG type MIG 445 MK III -Max. Welding power: 405 A -Water cooled -Wire feed case: MWF 11 4-roller drive -Accessories: including hose package, ground cable, gas fitting -Dimensions: 1100/470/H1370 mm -Weight: 172 kg

x-travel: 155 mm y-travel: 170 mm z-travel: +- 25 mm chucking diameter: 135 mm Drive: 3,7 kW spindle speed:: 8.000 Turret: 2 a 10 c-axis: 0,0001 0 y-axis: +- 25 mm Number of working hours: 10.000 h total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.