1050 kva used for sale

Key data: 2200 kN

Engel Victory 1050/220 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 55 mm Injection weight: approx. 480 g Spray pressure: 2053 bar Dosing volume: 511 ccm Clamping unit: Clamping force: 220 t Spar spacing: 0x0 mm Size of the clamping plates: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Operating hours: 38,188 h in automatic mode Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 4 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 12 Injection unit is wear-resistant and resistant to ...

Engel Victory 1050/220 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 50 mm Spraying weight: approx. 395 g Spray pressure: 2332 bar Dosing volume: 422 cc Clamping unit : Clamping force: 220 t Spar spacing: 0x0 mm Size of the clamping plates: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Operating hours: 32,609 h in automatic mode Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 4 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 12 Injection unit is wear-resistant and resistant t ...

Key data: 3000 kN

Engel Victory 1050/300 Tech Ecodrive with the Wittmann W832 PRO robot / Hybrid machine / Operating hours: approx. 25,000 h in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 60 mm Injection weight: approx. 540 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 300 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Machine in very good technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 25,000 in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic core pull x 1 Control with hot runners x 18 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional ...

Hello, We hereby offer you a used hand plate sheet metal snips, Bernardo, type HLS 1050 x 2.0. Manufacturer Bernardo, PWA Handels ges. m.b.H. Type HLS 1050 x 2.0 Year of construction 05/2023 Machine No. PWA-230114 Cutting length 1050 mm Max. sheet thickness (steel 400 N/mm²) 2.0 mm Backgauge adjustment 0 to 600 mm Table stop adjustment 95 to 450 mm Table size 1300 x 600 mm Working height approx. 765 mm Machine dimensions 2000 x 1040 x 1600 mm Transport dimensions 1900 x 1050 x 1120 mm Machine weight 500 kg Optional accessories included: Back gauge 600 mm Hold-down device with quick clamp Note: The aforementioned technical data have been taken from brochures of the manufacturer or other sources, for which we cannot guarantee the accuracy and completeness. Scope of delivery: 1 piece used hand panel sheet metal shears Bernardo, type HLS 1050 x 2.0 Area ...

This 3-axis POSmill C 1050 was manufactured in 2014. It features a travel of 1050 mm in the X-axis, 530 mm in the Y-axis, and 630 mm in the Z-axis. The machine is equipped with a Heidenhain iTNC 530 control system and a tool changer that holds 30 tools. If you are looking to get high-quality machining capabilities, consider the POSmill C 1050 vertical machining centre we have for sale. Contact us for further details.

Manufacturer: Gur Is Model: TY-1050 MT Year of Manufacture: 2020 Machine Type : Bagmaking Machine Condition: Good working condition, currently in production Materials and Film Specifications - Film types: LDPE, HDPE, recycled film extracts - Film thickness: 20 to 100 micron PE film Production Specifications - Sealing width (bag length): up to 1050 mm - Draw length (bag width): 80 to 600 mm - Linear speed: up to 300 m/min - Output: up to 200 bags per minute Bag Types Produced - Patch handle bags with handle cut-off - Safety bags - Side weld and bottom seal bags - Bottom gusset bags - Open and closed lip bags - Round bottom bags - Header seal bags Drive and Control System - Control: PLC with operator interface terminal - Drive: servo motor driven input nip rollers and sealing bar - Print registration: photocell print registration control included Attachments and Accessories In ...

Max Resolution: 2880 x 1440 dpi Max Printable Width: 44? Print Speed: 16 x 20? from 2:02 PrecisionCore TFP Print Head Technology PrecisionDot Screening Technology 11 UltraChrome HDX Inks with Violet Auto-Switching Black Ink Technology User Scheduled Print Head Maintenance 2.7? Color LCD Screen, Built-In Cutter USB 2.0 and Ethernet Connectivity

: gebraucht : 2021 : 9502 : Türkei : 2100 € : 1 : 1050 mm : 2 mm : 75 mm : 1930 mm : 700 mm : 1160 mm : 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table shear cutting knife, replacement knife for table shears, replacement cutting, cutting knife, scissor knife, tape cutting device -Manufacturer: Schleicher, cutting device from conveyor system WV-SYS 160-1050 -Cutting width: max. 900 mm -Dimensions: 1400/165 / H785 mm -Total weight: 300 kg

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 500 mm -Piston rod: Ø 20 mm -Number: 2 pieces available -Price: per piece -Dimensions: 685/65/H65 mm -Weight: 4.2 kg

Guide rail - support rail for shafts, rails -Type: 1050-620-00 -Holes: 6.5 mm -Holes spaced 100 mm -Price: per piece -Quantity: 6 pieces available -Dimensions: 600x50xH23 mm -Weight: 1 kg/piece

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller track, carrier rollers -Conveyor rollers: transport rollers diameter 80 mm -Transport width: 1050 mm -Shaft: M16 x 2 length 38mm -Number: 4x transport roller available -Price per piece -Total dimensions: Ø 80 x 1135 mm -Weight: 6.2 kg/pcs

Clamping plate, welding table, welding table, straightening plate -Clamping plate: solid design, with large vice -Clamping area: 1050 x 1040 mm -Table height: 715 mm -Plate thickness: 180 mm -Total dimensions: 1380/1060/H950 mm -Weight: 1550 kg

Base for bending tool, bending tool, die, lower knife, lower tool, prism tool, turning prism, 1-piece die block for die bending machine, die tool, folding tool -Pad for bending tool:, 3 parts -Length: 3x 1050 mm -Dimensions: see drawing in the photos -Transport dimensions: 1050/80/H100 mm -Weight: 44 kg

conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: Transport rollers diameter 82 mm -Transport width: 1000 mm -Mountings: Ø20 mm M12 -Number: 4x transport rollers available -Price: per piece -Dimensions: Ø 82 x 1050 mm -Weight: 8.2 kg/piece

Double reel, reel, unwind reel -Unwind reel: Double reel with 2 servo motors (each reel driven individually) -Drive: 2 Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 servo motors -Reel: Ø 1050 mm -Photos: see photos -Dimensions: 1050/840/H1755 mm -Weight: 200 kg

Transnorm conveyor belt GF 1050-600-500 RA2475 Technical data: Conveyor length (NL): 1050 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1050 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 scope of delivery ...

: neu : 2025 : 090120 : prompt, Zwischenverkauf v : Türkei : 7100 € : 137.03 € : 1 : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll HARDENED ROLLS tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9656 : prompt, Zwischenverkauf v : Türkei : 2400 € : 1 : 1 : 1050 mm : 1 mm : 56 mm : 1400 mm : 700 mm : 1120 mm : 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11400 € : 218.88 € : 1050 mm : 5 mm : 130 mm : 3,5 m/min : 2.2 kW : 2200 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A CNC vertical milling machine POS is available. Travel X/Y/Z: 1050mm/530mm/630mm, table dimensions X/Y: 1150mm/560mm, max. table load: 700kg, tool holder: SK40, tool stations: 30, speed: 10000rpm, feed rate: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 7600kg, control: Heidenhain. Documentation available. An on-site inspection is possible. The machine has a defect.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 10000 € : 193 € : 1050 mm : 4 mm : 110 mm : 2.2 kW : 1100 mm : 750 mm : 1000 mm : 990 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool trolley, workshop trolley, transport trolley, table trolley, sliding trolley, material trolley -Material trolley: 2 pieces with swivel casters, used for EHT guillotine shear -Car1: 1100/1010/H530 mm weight 67 kg -Car 2: 1400/1050/H390 mm Weight 107 kg -Swivel casters: 4 each -Submission/Price: complete -Transport dimensions: 1400/1105/H700 mm -Weight: 174 kg

: neu : ca. 10 Wochen ab Auftrags : Türkei : 4900 € : 109.71 € : 1050 mm : 3 mm : 2 mm : 90 mm : 2080 mm : 700 mm : 1250 mm : 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9740 : prompt, Zwischenverkauf v : Türkei : 6200 € : 119.66 € : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diesel generator set 125 KVA Iveco 6Zylinder year 1994,6900 hours Schallgedämmt. Ready and available in 59557 Lippstadt Nationwide delivery cheap Ask for more'm under 0172 72 653 24 available daily 8-22 h

Year of manufacture 1997, Model: GEW, 250 KVA, 5713 h per hour meter reading, 1 owner, Iveco 6 cylinder diesel

Power supply, converter, converter, power supply unit, Smart-UPS, spare battery, UPS system -Transfer: in the current condition as seen -Error: L3 power level defective -Manufacturer: AdPoS, UPS system -Type: UPS Maxi-J FH 40 kVA -Dimensions: 825/440/H1270 mm -Weight: 154 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer -Manufacturer: jacket, three-phase transformer -Type: DAT 2.2 kVA -Primary: 380 V 3.6 A -Secondary: 115 V 11.0 A. -Dimensions: 265/145/H225 mm -Weight: 31 kg

Power: 150 kVA / kW 120 Diesel engine / type: DEUTZ / BF6M1015 Cylinder: V 6 Cooling: liquid-cooled Generator / type: SIEMENS / 1FC2-282 Voltage: 400 / 231 V or 415 / 240 V Frequency: 50 Hz Speed: 1500 rpm Type: mobile complete unit with the silencer hood on dual trailer vehicle, dual circuit compressed air brake system Tank: approx. 450 litres Switchgear / Starter: Automatic start-stop for mains replacement Battery voltage / capacity: 24 V / 2 x 143 Ah Generator switch: Yes Accessories: Sockets 220 V / 400 V, spare wheel Dimensions (L X W X H): approx. 6000 X 2200 X 3300 mm Weight: approx. 8000kg

Power: 50 kVA / 40 KW diesel engine (four-stroke) / type / Nr: Deutz / BF 4 M 2012/ 11207641 cylinder: 4 in line Cooling: Water-cooled Generator / type / Nr.: Mecc Alte / ECO 32-1 L/4 / 0001694265 Voltage: 400 V / 231 V Frequency: 50 Hz Speed: 1,500 min-1 Type: Motor and generator separately, without base frame Tank: - Switchgear / Starter:-/ electric battery voltage / capacity: 12 V / 110 Ah Generator switch: - Power switch: - Automatic: - Accessories: - Dimensions (L X W X H): Engine: 1280 x 620 x 1000 mm, Generator: 840 x 390 x 490 mm Weight: Engine: approx. 390 kg, generator: approx. 248 kg

Description: Design : Casting resin transformer Design: Dry Make : SGB Built: 2010 Condition : new Rated power: 1000 KVA Overvoltage: 10 KV +- 2 x 2.5% Undervoltage: 400 V Switching group: Dd6y 5 Frequency: 50 Hz Cooling type: AN Total weight: 2410 Kg If you have any questions don't hesitate to ask. Yours sincerely / Best regards Mr. Serhan Managing Director - Owner Company M&S EXPORT Lippstadt Ostenfeldmark 17 Industrial estate on the moonlight 59557 Lippstadt Owner: M. Mousa Serhan Turnover Tax No.: DE 255543367 Phone: 02941 / 96 77 818 Fax: 02941 / 96 77 832 Mobile: 0172 / 72 653 24 Email: Transformatoren@gmx.de

Power: 440 kVA / 352 kW diesel engine / type: MTU / 12V183TB32 Cylinder: 12 / V Cooling: 2-circuit cooling system Generator / type: A. v. Kaick / SHASHI 80/500-4 Voltage: 400 / 231 V Frequency: 50 Hz Speed: 1500 min type: complete unit in the soundproofed 20' HC container Tank: approx. 1000 LTR. Switchgear / automatic switchgear, Symap Battery voltage: 24V Generator switch: Yes Dimensions (L X W X H): 6000 x 2340 x 2900 mm Weight: 12,000 kg

2 piece "Backlog from series production" Capacity: 330 kVA / 264 kW plus 10% overload Diesel engine / type: DEUTZ / BF6M1015 Cylinder: V 6 Cooling: liquid-cooled Generator / type: SIEMENS / 1FC2-353 Voltage: 400 / 231 V or 415 / 240 V Frequency: 50 Hz Speed: 1500 rpm Type: mobile complete unit with the silencer hood on dual trailer vehicle, dual circuit compressed air brake system Tank: 550 l Switchgear / Starter: automatic switchgear for parallel operation Battery voltage / capacity: 24 V / 2 x 143 Ah Ggenerator switch: Yes Power switch: No Automatic: Yes - Kuhse Accessories: weather protection cover, Sockets 220 V / 400 V, spare wheel Dimensions (L X W X H): approx. 6000 X 2200 X 3300 mm

Power: 90 kVA / 72 kW Diesel engine / type: Deutz / BF4M1013EC Cylinder: 4 Cooling: liquid-cooled Generator / type: Marathon / 430PSL1315 Voltage: 200/115 V Frequency: 400 Hz Speed: 2000 RPM Type: Mobile, fully enclosed ground power unit on dual trailer vehicle Tank: approx. 200 litres Switchgear / Starter: electric Battery voltage / capacity: 12V Generator switch: Yes Power switch: No Automatic: No Dimensions (L X W X H): approx. 3100mm x 1500mm x 1660mm plus Weight: 2900kg

Power: 200 kVA / 160 KW Diesel engine (four-stroke) / type / Nr.: / D 2858 MT / cylinders: 8 V Cooling: Liquid-cooled Generator / type / Nr.: AvK / DKB 55/200-4/420703 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 rpm Type: Soundproofed canopy Tank: 600 l and external fuel connection Switchgear / Starter: Automatic with no brake return / elektrical Battery voltage / capacity: 24 V / Dimensions (L X W X H): approx. 4000 x 1600 x 2200 mm

Power: 500 kVA / 400 kW Diesel engine / type: MTU / 12V183TB32 Cylinder: V12 Cooling: liquid-cooled Generator / type: NEWAGE STAMFORD / HCI 534 D2 Voltage: 400 / 231 V Frequency: 50 Hz Speed: 1500 min-1 Type: complete unit in the sound-proof 20' - HC-container Tank: 1500 litres Switchgear / Starter: automatic switchgear with handover synchronisation. Battery voltage / capacity: 24 V Generator switch: Yes Power switch: No Automatic: Yes Dimensions (L X W X H): approx. 6150 x 2480 x 2896 mm Weight: approx. 12000 kg Year built: 1996 / 2010

Yanmar Diesel Generator Set 16 kVA - NEW + + E-Start - AVR - Water Cooled + + - - - - - Engine: - Manufacturer: Yanmar (Italy) - Model: 3TNV70 - 2 cylinders - Diesel - Water-cooled - Power: 22 hp - 872 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 16 kVA - 230 / 400 volts - 50 Hertz - AVR controller (+/- 1%) - - - - Equipment: - Electric start - AVR controller - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter + phase selector switch - Hertz display - Operating hours counter - Emergency stop switch - - - - - Engine control unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engine temperature too high - Oil pressure too low - Battery voltage not i.O. - Tear from the V-belt - Overspeed / Underspeed - - - - - Other data: - Dimensions: 130 x 70 cm - Weight: 485 kg - Consumption: 3.1 lt ...

Power: 500 kVA / 400 kW Diesel engine / type: VOLVO / TAD 1631 GE Cylinders: number 6 Cooling: liquid-cooled Generator / type: MECC ALTE / ECN 40 SC/4 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 rpm Type: complete unit in the soundproofed 20 container Tank: 1000 liters Switchgear / Starter: Automatic start-stop for mains replacement Battery voltage / capacity: 24V Generator switch: Yes Power switch: Yes Automatic: Kuhse Dimensions (L X W X H): approx. 6100 x 2340 x 2380 mm Weight: approx. 9000 kg

Kohler Diesel Generator Set 20 / 22 - NEW E-Start - AVR - 230 / 400 Volt - soundproofed - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - AVR controller (+/- 1%) - - - - Equipment: - Electric start - AVR controller - 1x 230V 32A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter + phase selector switch - Hertz display - Operating hours counter - Emergency stop switch - - - - - Engine control unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engine temperature too high - Oil pressure too low - Battery voltage not i.O. - Tear from the V-belt - Overspeed / Underspeed - - - - - Other data: - Dimensions: 140 x 70 cm - Weight: 450 kg  ...

Power: 690 kW / 552 kW Four-stroke diesel engine / type / Nr: Deutz MWM TBD 234 V16 No. 234.16.01156 Cylinders: V16 Cooling: E cooler Generator / type / Nr.: Marelli MX 400 SCI 4 No. MS-1003 Voltage: 400V Frequency: 50 HZ Speed: 1500 rpm Type: Complete unit on base frame in 40' container Tank: 1500 LTR. Switchgear / Starter: Automatic switchgear / electric start Battery voltage / capacity: 24V Generator switch: Yes Power switch: No Auto: Yes (Symap ECG), mains parallel operation Dimensions (L X W X H): 40' container Weight: approx. 18 t

Kohler Diesel Generator Set 11 - NEW E-Start - AVR - 230 / 400 Volt - soundproofed - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 16 hp - 954 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 10 / 11 kVA - 230 / 400 volts - 50 Hertz - AVR controller (+/- 1%) - - - - Equipment: - Electric start - AVR controller - 1x 230V 16A socket - 1x 400V 16A socket - incl. hedging - Key start - Voltmeter - Operating hours counter - Emergency stop switch - - - - - Engine control unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engine temperature too high - Oil pressure too low - Battery voltage not i.O. - Tear from the V-belt - Overspeed / Underspeed - - - - - Other data: - Dimensions: 95 x 65 cm - Weight: 235 kg - Consumption: 2.5 ltr. / h (75%) - - - - -  ...

Power: 250 kVA / 200 KW Diesel engine (four-stroke) / type / Nr.: / D 2858 MT / 101801/38 Cylinders: 8 V Cooling: Liquid-cooled Generator / type / Nr.: AEG / SJRJ 80e/4 d / 806129 Voltage: 400/231 V Frequency: 50 Hz Speed: 1500 rpm Design: soundproofed canopy Tank: approx. 720 l Switchgear / Starter: Automatic with no brake return / electrical Battery voltage / capacity: 24 V Generator switch: Yes Power switch: No Automatic: DEIF, type BGC 108 Dimensions (L X W X H): Approx. 4000 x 2500 x 2500 mm Year of manufacure: 1972, built into canopy 2016

Power: 450kVA / 360 KW Diesel engine (four-stroke) / type / no.: IVECO 8281 SRI 2709 / 509102 Cylinders: 8 V Cooling: water cooled Alternator / type / no.: Leroy Somer 47.1 L9 C6/4 / FJ092825/01 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 rpm Type: Soundproofed canopy Tank: 600 l and external fuel connection Switchgear / Starter: Automatic with no brake return / elektrical Battery voltage / capacity: 24 V / Dimensions (L X W X H): approx. 4000 x 1600 x 2200 mm

Kohler Diesel Generator Set 20 / 22 kVA - NEW E-Start - AVR - 230 / 400 Volt - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - - - - Equipment: - Electric start - AVR controller - 1x 230V 16A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter - Ammeter - Hertz display - Operating hours counter - Low oil pressure warning light - - - - - Other data: - Dimensions: 120 x 62 cm - Weight: 271 kg - Consumption: 4.0 ltr. / h (75%) - - - - - Scope of delivery: - Kohler Diesel Generator Set 20 KVA - with electric start - Start unit - Tank - Exhaust - Battery - Sockets - - - - - Transport: - A Germany-wide transport including unloading by truck with lifting pl ...

Kohler Diesel Generator Set 11 kVA - NEW E-Start - AVR - 230 / 400 Volt - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 16 hp - - - - - Generator: - Manufacturer: Linz (Italy) - 11 / 12 kVA - 230 / 400 volts - 50 Hertz - - - - Equipment: - Electric start - AVR controller - 1x 230V 16A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter - Ammeter - Hertz display - Operating hours counter - Low oil pressure warning light - - - - - Other data: - Dimensions: 106 x 62 cm - Weight: 183 kg - Consumption: 2.5 ltr. / h (75%) - - - - - Scope of delivery: - Kohler Diesel Generator Set 11 KVA - with electric start - Start unit - Tank - Exhaust - Battery - Sockets - - - - - - - - - - Transport: - A Germany-wide transport including unloading by truck with lifting platf ...

One used 2650 KVA AEG 5250V alternator ( generator end ) for sale. The alternator is in a good running condition. He was driven by a AEG Kanis G20 back pressure steam turbine. The location is our warehouse in solingen, germany. Brand: AEG Type: DKBH 4565/04 voltage: 5250V Electrical power: 2650 KVA RPM: 1500 rpm Year of construction: 1983 Weight: 8 tons Price on request: Here you can download the alternator pictures: (6 MB) abc.stromerzeuger-discount.de/Generator_2650KVA_5250_Volt_AEG/Generato r_DKBH_4565-04_AEG_2650_KVA_AEG_5250_Volt.zip Call us : 0163/5263546

Transformer - Voltage Transformer 500 --> 380V Manufacturer Flasshoff & Klosterberg Type DTB50kVA Power 50kVA Primaer 3x500V - 525 - 550 59A Sekundaer 3x380V 76A Hz 50-60 Insulating-Kl.E External dimensions: Transformer 1m wide 92cm high 46cm deep Inside 33cm deep 74cm wide 80cm high Weight 450kg Special price

Transformer - Voltage Transformer 500 --> 220V 10kVA Manufacturer Flasshoff & Klosterberg Type DTB10kVA JP43 Power 10kVA Primae 3x500V 12A Sekundaer 3x220V 26,20A Hz 50-60 Insulating-Kl.E Special price

Additional options New/unused EPA marked Yes Engine Mitsubishi S16R-PTA 1915 kVA generator power Generator Mecc Alte ECO46-2S/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 18,950 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information Available with soundproof canopy as well.