1000 kw gas used for sale

- Gas mixing valve MWM 12301147 - Suitable for several motors - Please note! Price per piece! - 12301147 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating  ...

- Mixing pipe mixture line MWM 12301281 - References: 12300476 ; 12300650 - Suitable for several motors - Please note! Price per piece! - 12301281 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proje ...

Caterpillar G3516 - Used - 1000 kW - 4EK

Key data: 999 , 400

4 x MTU 8V4000 GS MIP + MMC for sale. Series 4000 four-stroke turbocharged gas engine with mixture cooling - compact, high performance, reliable, maintenance-friendly and extremely economical. Lean mixture technology, state-of-the-art electronic ignition system with individual ignition timing and automatic ignition power control, anti-knock control as well as highly responsive mixture and load control ensure economical and safe genset operation with optimum use of the energy input. Island operation capability. Make and Model: MTU 8V4000 GS MIP Capacity: 999kW Hours: 0 Year: 2023 Fuel: Natural Gas V: 400 HZ: 50 Scope of supply: Engine, Alternator (Stamford), Base frame, MIP (MTU Interface Panel), MMC (MTU Module Control - The MMC contains the cogeneration control system including mains monitoring, visualization and user interface). Price: €285,000 each Plea ...

Machine type MIG/MAG welding system MerkLE brand Type M 254 K Connection voltage 3 x 400 Volt Setting range 25 – 250 amps Duty cycle 60 % ED at 250 Ampere 100% ED at 200 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 955 x 460 x 780 mm Weight 110 kg Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 months warranty! 1 piec ...

Machine Type Electrode Inverter Welding Rectifier with bi-power setup Merkle brand Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Setting range 20 – 280 amps Duty cycle 35 % ED at 280 Ampere 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable weldable material thickness 7 mm Cooling inverter by built-in fan Special accessories Bi-Power setup Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 6 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece of ...

TPL69-A30 TURBOCHARGERS FOR SALE

ABB TPS61-F33 EXHAUST GAS TURBOCHARGERS FOR SALE

Gas type : biogas Power 1250 kw Speed 1500 rpm with container

Bergen Rolls Royce B35:40V20AG complete gas power plant Year of Make 2011 running hours: 16.380 Hours 8415 Kw 11kV 50 Hz at 750 RPM with AVK DIG 167 f/8 alternator 9100 kvA Complete power plant with all auxilaries: Control Air Compressor ,Self Demand Transformer, LT cooling water system, cooling tower, HT cooling water system, cooling tower, cooling fans, Start Air Compressors and Air tank, Natural Gas Regulator Unit, Emergency Diesel Generator 220 kVA, piping systems oil filter and heater exchangers, Neutral Earthing Resistor Unit, Generator Cooling Fans, Steam Boiler: Nooter/Eriksen Capacity: 5.5 T/h, Switchgear Units, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

Cutting length 8,000 Cutting width 2,500 Generator HYPERTHERM HPR 130 HD 130 Amp HYPERTHERM generator mod. HTR300XD SIEMENS numerical control Bevel head Oxyfuel cutting head

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

For sale is an AvK DIG 140 i/4 generator, which bears the serial number 84 27519 A101. This model was originally paired with a Jenbacher 620 engine with the design number B227. The generator is characterized by its high power of 3400 kVA, which is generated at an output voltage of 10,000 V and a frequency of 50 Hz. This model was manufactured in 2005 and has clocked up 75,000 hours since then. An important aspect to keep in mind is that this generator has been completely overhauled, including Unitrol. This ensures that it is still in optimal condition despite its intensive use. The price of this generator is 29,000 euros. For more information or to arrange a viewing, please do not hesitate to contact us

For sale is a Stamford HVSI 804 R2 generator with serial number 0856607/01. This generator was coupled to a Jenbacher 420 engine with the design number H719. The generator delivers an output of 2167 kVA at an output voltage of 10,500 V. It was manufactured in 2010 and has since clocked up 85,200 hours of operation. An important aspect to keep in mind is the careful maintenance history of this generator. At 60,000 operating hours, maintenance was carried out by Baumüller and at 70,000 operating hours, a comprehensive overhaul was carried out. The price of this powerful and well-maintained generator is 18,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.

CUMMINS 2,000 kW Natural Gas Generator Set Condition: Low Hour 990 Hours Since New Engine: Brand: Cummins Model: QSV91-G3 Serial#: 66302908 Date of Manufacture: 10/02/2013 Fuel Type: Natural Gas Governor: Electronic Air Cleaner: Dry Type Flywheel Hsg. Size: N/A Cooling: Radiator Cooled Alternator: None Starter: 24 Volt Electric Starter EPA Tier Rating: No Tier Rating Package: Brand: Cummins Model: C2000 N6C Serial#: K13K591216 Control Panel: with Autostart and Safety Shutdowns Breaker: No 0 Amp Enclosure: None Fuel tank: Battery Charger: No Battery(ies): No Block Heater: Yes Muffler(s): No Trailer/Chassis: No Trailer Title Available: No Notes: Rated Continuous Prime Power Generator: Brand: Newage Model: MVS1804R2 Serial#: P13J026650 kW: 2,000 kVA: 2,500.00 Rating: Continuous Volts: 2400/4160 Amps: 347 Phase: Three Phase Power Factor: 0.8 Temp. Rise: 125° Frame Size: 51 # ...

NATURAL GAS THERMAL POWER PLANT CONSISTING OF 3 CUMMINS 1750GQPB GENERATOR SETS (QSV91-G ENGINE) Fully equipped natural gas thermal power plant. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251030), comprising Cummins QSV91-G Engine (66300362) and PCS; with 7695 operating hours. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251410), comprising Cummins QSV91-G Engine (66300363) and PCS; with 8746 operating hours. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251420), comprising Cummins QSV91-G Engine (66300359) and PCS; with 8061 operating hours. Electrical panels and controls for the respective equipment; DMC 300 (paralleling equipment); QTA (Automatic Transfer Switch); Noise attenuators; 02 Water towers, pumps, and associated cooling system pipes; 01 small transformer, switches, and cable trays; Maintenance switches and ...

UK Power Generators Ltd is selling the Caterpillar G3516B with 1.1 MW and 2004 is the year of manufactured. This is a containerized package, with the following specification details: Machine Model G3516B Year of Manufacture 2004 Power Output 1100 kw Fuel Gas Condition Used RPM 1500 RPM Frequency 50 Hz Voltage 400 V Location United Kingdom Containerized Complete Containerized Package If you are looking for a great reliable source of energy to enhance your business, production and lighting people homes with affordability. Choose us, for your energy needs to be sorted. The container has very high specs, and the transformer is included in the containerized package. The transformer is Step up 400-11000 V. Contact us with your company details and further information at: Infoukpowergeneratorsltd

UK POWER GENERATORS is offering Box Package powered by Gas Fuel Manufacturer: MWM Duetz Model: TBG 620 V12 K Sr No: 620 12 000 295 Engine: Rated Output Power: 1050 kw Speed: 1500 RPM Frequency: 50 Hz Voltage: 400 V Stamford Alternator: Rated Output: 1330 Kva Speed: 1500 RPM Voltage: 400/231 V The genset has only done 21,824 running hours, which is very low. It has only been running in winters for CHP operations. It has been maintained throughout its life according to manufacturer approved service provider, as per the manufacturer recommendations. Following is the scope of supply: Everything inside the container as per the pictures attached. Engine and alternator mounted on skid Engine and breaker panel. Table cooler and radiator Exhaust Silencer In order to get more detailed information please emai ...

UK Power Generators Ltd, have pleasure to present gas unit by Caterpillar G3516A for sale. Attached are the pictures for the genset, containerised package Machine Model Caterpillar G3516A Year of Manufacture 2000 Rated Output Power 1030 kw Fuel Gas Condition Used Speed 1500 RPM Frequency 50Hz Voltage 400 volts Location United Kingdom The containerised package is a complete plug and play unit. All life maintained by manufacturer approved service provider and available on request. Fully major overhauled been completed just now. Great For site visit, pricing and booking information, feel free to contact us at: Infoukpowergeneratorsltd ~ UK Power Generators Ltd

JENBACHER MOD. J612 GS C02 YEAR: 1998 HOURS: 55000h ELECTRICAL POWER: 1472 kW - 400V AC 50Hz The equipment is stowed and ready to load. SCOPE OF SUPPLY: The following are integral parts of the generators and groups necessary for their commissioning (gas input, power output): GENSET: Engine JENBACHER J612 GS C02/ 1472 kWe Year 1998, Operating hours: 55000h. Alternator STAMFORD / 1840 kVA - 1472 kW- 400V AC 50HZ Generator (alternator, motor and motor PLC) Generator Control Panels (DIANE XT) Auxiliary control panels Low voltage switch Gas train Silencer Pumps Technical documentation. You can find us on Whatsapp: +34 611457522 Email: Sales@eurogensets.com

Max. operating temperature: 1600°C, including control cabinet, feeder and a defective glove box.

TO WHOM IT MAY CONCERN; WE VE GENUINE 3 PCS MAN NR 34 / S 114. COMPLETE EXHAUST GAS TURBOCHARGER WITH SILENCER AT AT OUR STOCK. IT IS OVERHAULED & TESTED ON TRIAL ENGINE OPERATION . PLS FIND SPECT AT BELOW. TYPE NR34 / S 114 SERIAL NO SMM0965 t max . 650 C n max 26300 1/min YOB 2012 -09 . MADE IN MAN ENTPACO IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Machine type MIG/MAG inverter welding system Böhler brand Type Uranos 2000 SMC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 35 % ED at 200 amps 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Wire feed gearbox 2-roller gearbox Fuse 16 amps Dimensions L x W x H 500 x 210 x 400 mm Special accessories TIG DC welding without HF E-welding, MIG soldering Weight 13 kg Age 6 months Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece ...

Agilent 5975C XL inert MSD with Agilent GC 6890 N GC Agilent 6890 N, Injector Split/Splitless, MSD 5975 C inert XL with EI,Turbopump,Fastscan Edwards Backing Vacuum Pump 1.5 Agilent Productivity Chemstation E02.02 on PC/Win 10 complete with all cables, Option: Agilent Liquid Sampler, Sampler/ CTC or Gerstel MPS 2) The system is ready for installation and ready for operation current service Installation at extra charge on request

Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently maintained/with warranty Installation on request

Circular cut diameter: 40-1000mm, max. cutting depth: 40mm, machine was scarcely used.

Key data: 750 , 400

(Deutz) MWM2016 V16 Natural Gas Generator Set Model: (Deutz) MWM2016 V16 Fuel: Natural Gas Year: 2007 Hours: 40,460 Capacity: 750 kW Hz: 50 Voltage: 400 V Scope of supply: Complete containerised genset including Engine, Marelli Generator, Frame, Control System, Gas Line, Radiator, Gas Filter and other accessories . Complete contarised genset. Very good condition. Turnkey ready to run now. A new crank was installed on 35,000 hrs. Available for Sale Now.

Nominal heating power: 80kW, length: 710mm, width: 1805mm, height: 1072mm.

There are two identical Viessmann Paromat-ER-ND available, nominal oil/gas output: 460kW, max. rated power input: 1000W, were maintained regularly.

There are two identical burners available, power: 350-2800kW, connection pressure: 15-500mbar, connected load: 9.23kW.

Fuel: natural gas, power: 300-2000kW, connection pressure: 15-500mbar, electric power: 4.32kW, operational hours counter: 38,723h, with documentation, without control cabinet.

Nominal heating output: 22.5-90kW, weight: 175kg, the machine was never used.

One complete engine and some spare parts for Jenbacher J620

Nominal power: 468.2kW, max. temperature: 100°C, capacity: 59l, length: 1870mm, width: 845mm, height: 1460mm, weight: 465kg, was maintained regularly.

Key data: 1500 , 400

2 x JENBACHER JMS420GS-B.L Biogas Generator Set Model: JMS420GS-B.L Fuel: Biogas Year: 2012 Hours: 65,000 & 63,500 Capacity: 1500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system (XT3 control), Gas line, Heat exchanger and other accessories . Service History Status: Rebuild in April/May 2022, cost €260,000. Available for Sale Now. Price: €180,000

Key data: 1500 , 400

JENBACHER JMS420GS-B.L Biogas Generator Set Model: JMS420GS-B.L Fuel: Biogas Year: 2012 Hours: 60,500 Capacity: 1500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system (XT3 control), Gas line, Heat exchanger and other accessories. Service History Status: Rebuild in April/May 2022, cost €160,000. Replaced: piston lining, heads, and everything else common to rebuild. Not replaced: pistons, connecting rods, still within good range. Available for Sale Now. Price: €140,000

Key data: 1500 , 400

2 x JENBACHER JMS420GS-B.L Biogas Generator Set Model: JMS420GS-B.L Fuel: Biogas Year: 2012 Hours: Generator 1: 57,000. Generator 2: 54,000 Capacity: 1500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system (XT3 control), Gas line, Heat exchanger and other accessories. Service History Status: Well maintained by Jenbacher certified maintenance company. In need of service. Available for Sale Now. Price: Generator 1: €100,000 Generator 2: €105,000

CHP with generator Stamford, electrical output 190 kWel., customer property, variant as building integration, without exhaust gas heat exchanger

Machine type MIG/MAG welding system MerkLE brand Type M 210 K Connection voltage 230/400 volts Setting range 25 – 210 amps Duty cycle 15 % ED at 210 Ampere 60% ED at 80 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 855 x 390 x 585 mm Weight 75 kg Special accessories point and interval device Adapter for 230/400 V Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white  ...

Machine type MIG/MAG welding system Eurotronic brand Type MAG 3000 EC Connection voltage 3 x 400 Volt Setting range 30 – 300 amps Duty cycle 35 % ED at 300 Ampere 60% ED at 230 amps 100% ED at 190 amps Current setting 12 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-roller drive Fuse 16 amps Dimensions L x W x H 860 x 490 x 650 mm Weight 78 kg Age approx. 5 years Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, kpl. Equipped 1 pair of welding gloves 1 piece instruction manual  ...

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 190 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex ...

Machine type MIG/MAG welding system equipped for steel wire in 1.0 mm Rehm brand Type RD 250 Connection voltage 3 x 400 Volt Setting range 35 – 250 amps Duty cycle 40 % ED at 250 Ampere 60% ED at 210 amps 100% ED at 170 amps Current setting 10 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive Fuse 16 amps Dimensions L x W x H 900 x 465 x 855 mm Weight 81 kg Age approx. 15 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 11 ...

MWM TCG 2020 V 12 (ready to install) MN: 2204405 Circumference: - Crankcase incl. new bearing - Crankshaft (Std-Maß) incl. new bearing - Camshaft (12301190 / 12301191) incl. new bearing - Wheel operation incl. wheel box lid - Flywheel housing - Oil pump with oil suction pipe - Oil pan - Pestle (12453142) - Oil pressure valve On request, the scope can be extended (e.g. pistons, liners, cylinder heads, etc.) The offered part motor can also be used as TBG 620. The engine is not sold as a replacement engine. Measurement protocols are included. Please contact us for a written quote.

3 PIECES JENBACHER 320 AVAILABLE All sets are in perfect condition, inspection is possible. Directly available from our warehouse. Contact us for more information. GAS POWER HOLLAND

Key data: 1500 , 400

2 x JENBACHER Jen 420-GS-B25 Biogas Generator Set. Model: Jen 420-GS-B25 Fuel: Biogas Year: 2012 Hours: 73,000 and 74,000 Capacity: 1,500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system, Gas line, generator switch and other accessories. Service History Status: Rebuild done at 60,000h. Available for Sale Now. Price: €150,000 each

Available for sale 1 x 260 kW Gas genset Guascor SFGLD 180. Unit prepared to work in isle mode. The genset is in our installations and is in great working conditions.

Available for sale 1365 kW MWM TBG 620 V16 inside container. Equipment in good working conditions.

Available in stock 1 x Complete Containerized Gas Power Plant based on 1 x 725 kW Guascor FGLD 480. The power plant is mounted in a 40 ft container with its corresponding alternator, gas connection with regulation system, electronic control system and rest of auxiliaries (batteries, refrigerators, switches and control cabinets). Manuals and electrical diagrams are also available. The unit is in our warehouse - ready to go. Equipment in good working conditions.

Available for sale 1365 kW MWM TBG 620 V16 K. Equipment in good working conditions.

For sale a Dresser and Wayne CNG natural gas tap in good condition.