1000 kva used for sale

Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, stacker, tractor, wheel loader mount, adapter frame, universal carrier, fork carrier -Wheel loader mount: fork carrier, solid design -Mounting: Shaft Ø 38/ 51 mm, dimensions see photos -Forks: can be supplied for an additional charge, large selection available -Dimensions: 1000/170/H670 mm -Own weight: 134 kg

Shelving trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, rack trolleys, embroidery trolleys -Transport trolley: commission trolley, shelf trolley, stable design -3 levels: border intermediate dimension 450 mm -Chassis: 2 swivel castors / 2 fixed castors -Total dimensions: 1000/600/H1215 mm -Weight: 45 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, heavy-duty trailers, hand trucks -Handover: in current condition as viewed -Note: Note condition of wheels/platform -Heavy-duty transport vehicle: hand platform truck with 1-axle turntable steering, suspended -Platform: 1000/620/H380 mm -Load capacity: 1.5 t -Tires: Ø 255 x 70 mm solid rubber -Total dimensions: 2070/620/H380 mm -Weight: 98 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, heavy-duty trailers, hand trucks -Handover: in current condition as viewed -Note: Note condition of wheels/platform -Heavy-duty transport vehicle: hand platform truck with 1-axle turntable steering, suspended -Platform: 1000/660/H340 mm -Load capacity: 1.5 t -Tires: front Ø 240 x 60 mm / rear Ø 240 x 75 mm solid rubber -Total dimensions: 2020/660/H340 mm -Weight: 87 kg

electric heater, electric radiator, heating coil, electric heating, surface storage heating, surface heating -Manufacturer: Wibo, surface heating type thermatic 1000 with thermostat -Power: 1000 watts -Voltage: 220 V -Number: 2x heating available -Price: per piece -Dimensions: 800/110/H620 mm -Weight: 20 kg/piece

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Scissor lift table: with roller conveyor, on rail frame -Load capacity: 1000 kg -Platform: 2400 x 820 mm -Dimensions retracted: height 240 mm -Extended dimensions: height 1140 mm -Rollers: diameter 40 x 500 mm, roller spacing 100 mm -Rail spacing: 1554 mm -B. Pressure: 160 bar -Weight: 372 kg

Scissor lift table, scissor lift table, scissor lifting platform, scissor lifting platform, single scissor lift table, hydraulic lifting platform -Scissor lift table: with roller conveyor, on rail frame -Load capacity: 1000 kg -Platform: 2400 x 760 mm -Dimensions retracted: height 225 mm -Extended dimensions: height 1140 mm -Rollers: diameter 40 x 510 mm, roller spacing 100 mm -Roller conveyor: with belt brake, pneumatic -Rail spacing: 1490 mm -Weight: 350 kg

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, hydraulic lifting platform -Scissor lift table: with roller conveyor -Load capacity: 1000 kg -Platforms: 2420 x 710 mm -Dimension retracted: height 230 mm -Extended dimensions: height 1100 mm -Rollers: diameter 40 x 495 mm, roller spacing 100 mm -Roller conveyor: with belt brake, pneumatic -Weight: 360 kg

Castors, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, leveling roller foot -Manufacturer: Auto CFT Carrymaster, leveling roller 1 set / 4 pieces -Type: AC-1000 -Load capacity: 540 kg -Roll: Ø 72 x 31 mm -Adjustment range: 120 - 139 mm -Number: 2 sets of leveling rollers available -Price: per set -Single dimension: 140/103/H120 mm -Weight 1.6 kg/piece

clamping plate, marking plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1000 mm with cutout see photos -Table height: 920 mm -Plate thickness: 20 mm -Transport dimensions: 2000/1000/H920 mm -Weight: 347 kg

Switch cabinet cooling unit, switch cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, switch cabinet cooler -Manufacturer: Siemens, control cabinet cooling unit from CNC milling machine MAHO MH 800C -Type: K1000 -Voltage: 230V -Power consumption: 700 W -Dimensions: 155/1100/H455 mm -Weight: 48 kg

Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg

Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm -Table height: 925 mm -Plate thickness: 115 mm -Vice: clamping jaws: 150 x 30 mm clamping width 250 mm -Transport dimensions: 2480/1000/H1110 mm -Weight: 1850 kg

Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm -Table height: 870 mm -Plate thickness: 120 mm -Vice: clamping jaws: 100 x 30 mm clamping width 160 mm -Transport dimensions: 2280/1000/H1020 mm -Weight: 1500 kg

Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: Straightening plate with adjustable feet -Length: 2000 mm -Width: 1000 mm -Height: 285 mm -Sheet thickness: 30 mm -Adjustable feet: 4 pieces 240/240/H590 mm -Transport dimensions: 2000/1000/H525 mm -Weight: 960 kg

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: surface plate with adjustable feet -Length: 2000 mm -Width: 1000 mm -Height: 285 mm -Plate thickness: 35 mm -Adjustable feet: 4 pieces 240/240/H590 mm -Transport dimensions: 2000/1000/H525 mm -Weight: 960 kg

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: LinMot, Switching Power Supply 72V/1000W -Type: S01-72/1000 -Mains voltage range: Ue. AC 3 x 340-550V / 50/60Hz. -Dimensions: 270/65/H195 mm -Weight: 2.1 kg

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: MS Ultrasonic, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 35/1000L -Horn/Ultrasound sonotrode: see photos -Number: 2x ultrasound transducer units available -Dimensions: 270/110/H55 mm -Weight: 1.7 kg/pc.

Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic -Pressure force: 100 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, notching -Dimensions: 2360/760/H1800 mm -Weight: 2700 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape, heating sleeve -Type: 80/82 Ø 75 -Item No.: 129 069 -Heating power: 1000 W -Voltage: 220 V -Quantity: 1x heating cable included -Transport dimensions: 250/160/H80 mm -Weight: 1.2 kg

Container rotating device, welding rotating device, welding rotating device, welding device, welding rotary table, welding rotary and tilting table, welding rotating device, welding rotary tilting table -Manufacturer: Gieseking, Motorized welding rotary and tilting table -Type: SD 1 -Load capacity: 1 ton -Rotational movement: electrically continuously adjustable 0-1 rpm -Faceplate: Ø 1010 mm -Three-jaw chuck: Ø 290 mm, bore Ø 74 mm -Faceplate: motor-tiltable -Transport dimensions: 1750/1170/H1620 mm -Weight: 1392 kg

Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with sliding carriage, maximum travel 500 mm -Depth adjustment: 0 - 6 mm -Drive: 0.5 kW -Adjustable speed: 1200 - 8000 rpm -Angle: 45° -Accessories: Widia milling head, diamond grinding wheel, vacuum cleaner -Dimensions: 490/870/H1150 mm -Weight: 106 kg

Clamping plate, welding table, straightening plate, T-slot plate -3D welding and work table -in aluminum for stainless steel processing -for positioning and finish welding with T-slot system -Mounting area: 1000x1000 mm -2x pneumatic clamping cylinders with ground connection -Dimensions: 1000/1400/H1300 mm

PTO shaft, drive shaft -Capacity: 1 3/8 6 teeth (Ø 35 mm) -Length: 80-100 cm -They are suitable for fertilizer spreaders, field sprayers, band or circular saws, forestry winches, log splitters, hay turners, rotary rakes, loader wagons and many other implements. -Number: 10x PTO shafts available Price: per piece -Weight: 16 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston Quantity: 1 piece still available -Piston diameter: approx. 125 mm -Piston rod: Ø 85 mm -Stroke: 1000 mm -Total length retracted, center to center of hole: 1525 mm -Piston rod mounting: Ø 62 mm -Cylinder mounting: Ø 70 mm -Usable: universal -Dimensions: 1650/220/H150 mm -Weight: 140 kg

: neu : ca. 12 Wochen ab Auftrags : 1030 mm : 8 mm : 5 mm : 14 1/min : 3 ° : 7 : 500 mm : 7.5 kW : 100 l : 900 mm : 1550 mm : 1150 mm : 1600 mm : 1800 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 1000 mm, 2500 1/min

Lathe Voest Alpine Steinel WNC 500 S x 1000 Turning diameter 500 mm Turning length: 1000 mm Control system Sinumerik 810 T-GA 2 2 stage gearbox i = 4 Power: 37 KW at 100% ED Max. torque during turning: 1450 Nm Tailstock manual with clamping and coupling Speed max 2500 rpm Electronic handwheel For milling: Hydraulically swivelling servo motor with 720 Nm and max. 18.5 rpm 12-speed disc turret with driven tools max. 3000 rpm at 4 kw Tool holder VDI 40 Many VDI 40 tool holders for internal and external machining as well as driven tools, incl. some tools - e.g. internal turning steels otherwise without tools!

ZENO Zerkleinerungsmaschinenbau Norken GmbH ZTLL 1000x1200 Waste shredder in use until 03/2026 in good used condition Masch. No. 98A-4689 Standard version, screen hole 20mm Low-speed with moving floor Main drive 18.5 kW, hydraulics 0.75 kW 400/690 V, total rated current 36A Fuse 63A Conductor cross-section 4x16 square Weight 1950 kg, 20 cutting edges Rotor speed 140 rpm Rotor diameter 300 mm Extraction diameter 250 mm Exhaust air speed 30 m/s Inlet cross-section L 1000mm W 800mm External magnetic separator Spare blade

Key data: 1750 kN, 393 g/PS, 50 mm

Clamping force: 175t Year of Make: 2005 Injection weight in hp: 393g Injection Unit .../1000 Screw diameter 50 mm Spec. Spray pressure 2304 bar Injection volume 432 cc Injection weight in hp 393 g L/D Screw Ratio 22 Clamping unit 175/... Clamping force 175 t Size of the clamping plates 915 x 910 mm Lights spar spacing 560 x 560 mm Tool installation height 350 mm Opening way 700 mm Max. panel spacing 1050 mm Ejector path 200 mm Weight 9000 kg Dimensions(m) LxWxH 5.2 x 1.75 x 2.2 m Year of construction 2005 Control type MC4

General SKU215X091 MakeOlsa TypeER3 Machine number70037 Year of construction1987 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure trays3 Bar Main Features MaterialStainless steel Volume1000 Ltr. Surface5 m2 Specified Features - Tray dryer MaterialStainless steel 1.4301 (304) Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface5 m2 Drying chamber capacity1000 l Drying chamber sizes1050x1050x1000 mm Max. temperature130 deg C With jacketcheck Max. temperature130 Number of trays11 (24 sample plates) Tray sizes40x480x960 mm (sample plate) Distance between the trays65 mm Tray capacity15 l per sample plate With 1 doorcheck Connection for the vacuum pumpcheck Without vacuum pumpcheck Information Mounted on framecheck LocationBarneveld Floorspace1,5 x 1,5 m Total height2 m Weight1000 kg Extra Specificati ...

An automatic single-head underfloor saw Emmegi including a chip extraction system is available. Cutting angle: 90°, feed travel: 0mm-1000mm, positioning accuracy: +/-0.5mm, saw blade diameter: 500mm, motor power: 6.6kW, weight: approx. 1000kg. An on-site inspection is possible.

Offered is a precision lead and feed screw lathe: Center distance: approx. 1000mm, center height: 180mm, swing diameter over bed: 360mm, spindle bore: 35mm, spindle mount: D1-3 Camlock, spindle taper: MK5 (MT5), speed steps: 12 speeds, speed range: approx. 40-1800rpm, longitudinal feeds: 0.05-0.7mm/rev, cross feeds: 0.02-0.4mm/rev, metric threads: 0.4-7.0mm, inch threads (Whitworth): 4-56threads/inch. Inspection possible by appointment.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Completely overhauled in 2013 Heavy duty workpiece headstock tailstock Without chuck and without bezel in the photo Kelco 90 control The machine can be viewed in operation at the customers premises from 2025 up to and including January 2026. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU245Y172 LocationBarneveld CEcheck Technical specs Max. temperature180 °C Main Features PositionHorizontal Storage volume990 l Min. Temperature70 °C Information MakeWeiss Umwelttechnik GmbH Serial59226099400010 Magento base g_extra_specificationsWeiss Climate Test Chamber Water-Cooled with Humidity With temperature change rate of 5 K/min Simpac Control Data for temperature tests: Temperature range: -70°C to +180°C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature homogeneity spatially: ± 0.5 to ± 2 K Temperature change rate Heating: 6.1 K/min Cooling: 6 K/min Heat compensation max. 5000 W Data for climate tests Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.H. Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.3 K Temperature homogeneity spatially: ± 0.5 to ± 1  ...

General SKU001A015 Makeunknown Mounted on legscheck Main Features MaterialStainless steel Volume1000 Ltr. Specified Features - Stirring vessel MaterialStainless steel 1.4401 (316) Closed stirring vessel(1x) Capacity± 1000 Ltr Vessel sizesdia. 1200x800mm Dished bottomcheck Dished top sidecheck With covercheck Top connections(12x) Outletcheck Half coil jacketedcheck With paddle stirrercheck Motorcheck Information LocationBarneveld Floorspace1,4x1,4 M Total height3,5 MDiscountStirring vessels-DiscountStirring vessels > Stirring vesselsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU223N082 MakeEWAC B.V. Broek op Langedijk No.26455-040 Year of construction1996 Mounted on legscheck Pressure Working pressure3 Bar Working pressure jacket3 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1000 Ltr. Pressure3 Bar Specified Features - Pressure vessel Capacity1000 ltr Vessel sizesdia. 750x2210mm Dished topcheck Dished bottomcheck Top connectionsdia. 300mm + dia 100mm + dia. 32mm Outletdia. 100 mm With jacketcheck Max. temperature145 degr. C MaterialStainless steel 1.4401 (316) Information LocationBarneveld Floorspace1,0x1,0 m Total height2,8 m Weight620 kgPressure vesselsEwacTanks > Pressure vesselsBrand > Ewac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mac ...

Size: 1250 x 800 mm Equipments: Automatic lifting cycle controlled by a photocell or manual mode, fast operation. lifting height approx. 840 mm, machine height approx. 2000 mm Lifting Capacity: 1000 kg 380V power supply

An old segment cold circular saw Wagner Reutlingen is available. Series: 1, roller conveyor length: 4500mm, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2300mm, weight: approx. 3000kg. An on-site inspection is possible.

Unit 1 - Geiss CNC FZ 2800 x 1000 - Year of Manufacture: 2013 - Total Weight: 42.05 kN - Voltage: 400V, 3-phase + N, 50Hz - Connected Load: 25.62 kW - Rated Current: 37 Amp - Certification: CE Unit 2 - Geiss CNC FZ 2000 x 1000 - Year of Manufacture: 2012 - Total Weight: 30.22 kN - Voltage: 400V, 3-phase + N, 50Hz - Connected Load: 24.72 kW - Rated Current: 36 Amp - Certification: CE Find more here - / Contact us at -

Key data: 1000 kN

ARBURG ALLROUNDER SELECTA 470 S 1000 – 675 (Year 2001) Serial number: 187132 – Machine 8 Clamping force: 1000 kN Distance between tie bars: 470 x 470 mm Platen size: 637 x 637 mm Max. mould height: 750 mm Ejector force: 40 kN Ejector stroke: 175 mm Shot volume: 675 cm³ Operating voltage: 400 V – 3 Ph – 50 Hz Heating capacity: 14.9 kW Pump motor: 1 x 22.00 kW Total connected load: 36.9 kW Dimensions: 4180 x 1645 x h, 2140 mm. Machine weight: 5400 kg

PADE model 1000/N trimming-milling-drilling machine: – automatic sliding worktop – blade for header D=400mm, 3 hp motor – milling machine with shaft D=30mm, 5 hp motor – 5-spindle drilling machine, 360° adjustable, 3 HP motor Machine not CE compliant, for export

Key data: 1000 mm, 600 mm, 660 mm

Control Heidenhain ... TNC 620 Clamping table surface ... 1300 x 600mm Axis X ... 1000mm Axis Y ... 600mm Axis Z ... 660mm Spindle speed ... 0-10000 rpm controlled axes ... 3 cooling ... 20bar, Grundfos ISO 40 Max. table load ... 700 kg L x W x H ... 3000 x 2700 x 2940mmmm Machine weight... 5500kg Magazine spaces ... 24 Handwheel Heidenhain HR510FS Workpiece Probe Heidenhain TS460 Rinsing gun 10bar The machine has undergone a complete overhaul. More info on request. The machine is ready for the viewings.

Clamping force: 1000 kN. Distance between tie bars: 470 x 470 mm. Platen size: 637 x 637 mm. Max. mould height: 750 mm. Ejector force: 40 kN. Ejector stroke: 175 mm. Shot volume: 675 cm³. Operating voltage: 400 V – 3 Ph – 50 Hz. Heating capacity: 14.9 kW. Pump motor: 1 x 22.00 kW. Total connected load: 36.9 kW Dimensions: 4180 x 1645 x h. 2140 mm. Machine weight: 5400 kg. Serial number: 187133 – Machine 9

Leftover bread chopper Hommel Rotormat 1000 Condition: used, functional Separate control box Machine in stainless steel design Movable on 2 castors

B&A REF:  9311 TON: 260 SCREW DIAMETER:  55MM SHOT WEIGHT: 605 STROKE VOLUME:  642CM3 INJECTION PRESSURE:  1460AR PLATEN SIZES:  960 X 960MM DBTB: 650 X 650MM MIN MOULD HEIGHT:  200MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE:  650MM MAX DAYLIGHT:  1400MM EJECTOR STROKE:  225MM CONTROLS:  CM10 CORE PULLING: 1 AIR VALVES: 1 MOTOR: SERVO 22  HEATING CAPACITY: 14KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:  HYDRAULIC

CONTROLS   PLC SPECIFICATIONS THROUGH FEED GRINDING MACHINE   Working width: 1000 mm   number of brushing station: 6 BELT GRINDING UNIT   workpiece height (max): 100 mm   spindle revolutions (min): 0.3 /min   spindle revolutions (max): 10 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1800 mm   space requirements -front/back-: 1750 mm   total height: 2200 mm   total weight approx.: 1500 kg

For Sale: Boss Titan F-1000 Automatic Vacuum Packaging Machine, High-quality Boss Titan F-1000 Automatic vacuum packaging machine available for sale. This industrial-grade machine is designed for high-capacity and reliable packaging operations., Configuration:, - Automatic lid system, - Integrated discharge conveyor belt, - Equipped with the largest 300 m³/h Busch vacuum pump, Technical Specifications:, - Chamber size: approx. 1015 x 675 x 210 mm, - Seal length: up to 980 mm, - Vacuum pump capacity: up to 300 m³/h, - Power supply: 3-phase, 230/400 V, 50 Hz, - Advanced sensor control system with programmable settings, - Double seam sealing system for secure packaging, - Stainless steel construction for durability and hygiene, Features:, - Fully automatic operation for efficient production, - High-performance Busch pump ensures fast and deep vacuum levels (down to approx. 0.1 mbar), - Co ...

workpiece diameter: 5 - 1.000 mm module range: 0,2 - 25 helix angle: < 90 ° Control: Wenzel GearTec faceplate diameter: 750 mm x-axis: 1.200 mm y-axis: 550 mm z-axis: 1.000 mm total power requirement: 6,5 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2017 : 3901 : China : 8490 € : 1 : 6790 € : 32 mm : MK 4 : 300 - 1.000 mm : 32 - 2.500 (16) U/min : 1760 mm : 800 mm : 2080 mm : 1600 kg : 530 - 1.000 mm : 2.2 kW : 240 mm : 250 mm : 0,75 kW : 0,10 - 1,25 (8) mm/U box table 600 x 455 x 455 mm coolant equipment machine lamp mechanical clamping for height adjustment and spindle stock electr. clamping for arm rotation machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.