1000 kva used for sale

For sale is a used pelleting line that has been pelletizing wood fiber-based fertilizer with cattle manure and digestate for the past four years (approximately 5,000 hours total). It incorporates components from various well-known manufacturers, including the Amandus KAHL pellet press/continuous mixer, Bühler hammer mill/conditioner, CPM pellet cooler, Wynveen pellet screen, and Rako/Apullma conveying technology. Capacity: 1. Wood chips with dried cattle manure: approx. 1.5 t/h 2. Dried, separated compost/dried digestate: approx. 2.5 t/h 3. According to the manufacturer, KAHL, the press can process up to 3 t/h of biomass. The customer is now restructuring their operations, making this line available for sale. The preferred option is to sell the entire line, but individual components can be purchased separately by arrangement. The customer is primarily seeking to sel ...

Manual cleaning system for printing tools Type: HC-1000 Year of Make: 2020 good condition, fully functional, incl. stainless steel castors and various accessories (see photos) This revolutionary cleaning system is ideal for thorough and gentle cleaning of printing tools. Thanks to its well thought-out design and equipment with durable components, it meets the highest standards of efficiency and ease of use. Its detergent is non-volatile (VOC-free), fully recyclable and NEVER needs to be replaced thanks to the integrated recycling system. This saves time, reduces operating resources and disposal costs and also protects people and the environment. Features: - Completely solvent-free - Cleaning agent is recycled - No liquid waste - No explosion protection necessary - No suction necessary Equipment: - Flexible hose holder for precise work - Four sturdy stainless stee ...

- Dataserver - AICC2 (200 blocks of read only) - S pindle cooling (oil cooler) - 30 ATCs - Chip conveyor - Travel (X x Y x Z): 1.000 x 550 x 500 mm - Number of tool stations: 30 - Working area (X x Y x Z): 1.100 x 500 mm - Max. spindle speed:

9 SETS AVAILABLE: 1- BARMAG FK6-1000 M TYPE MULTİ (M6) YEAR 2000,TWIN MACHINE,DOUBLE DECK,W1.1,LYCRA,216 SPINDLES 2- BARMAG FK6-1000 V TYPE (V4) YEAR 2002,LYCRA,WITH INVERTER,240 SPINDLES 3- BARMAG FK6-1000 V TYPE (V5) YEAR 2002,WITH INVERTER,240 SPINDLES 4- BARMAG FK6-1000 V TYPE (V6) YEAR 2003,LYCRA,WITH INVERTER, 240 SPINDLES 5- BARMAG FK6-1000 V TYPE (V7) YEAR 2003,LYCRA,WITH INVERTER, 240 SPINDLES 6- BARMAG FK6-1000 V TYPE (V8) YEAR 2003,LYCRA,WITH INVERTER,240 SPINDLES 7- BARMAG FK6-1000 V TYPE(V9) YEAR 2003,LYCRA,WITH INVERTER,240 SPINDLES 8- BARMAG FK6-1000 V TYPE(V10) YEAR 2005,LYCRA,WITH INVERTER,240 SPINDLES 9- BARMAG FK6-1000 V TYPE (V11) YEAR 2005,LYCRA,WITH INVERTER,240 SPINDLES

Palettenheber mit Wanne / Pile Hoists - Stack Lift Polar L-1000-W-3 Baujahr / Year 1991 - Serial-No. 6172025 Format / Size max. 1100 x 750mm Hebekapazität / Loading capacity max. 1000KG Hubhöhe / Lifting height max. 1400mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Offer 24482 Specifications: - Max. working width 1020 mm - Max. material thickness 4.0 mm - Cutting angle 2.4 ° - Single stroke – continuous stroke can be preselected -one. Back gauge up to 700 mm - Front angle stop - Front pull-out sheet metal support - Drive 400 V / 3.4 kW - Space requirement approx. W 1450 x H 1180 x D 1400 mm - Weight approx. 900 kg

Massey Ferguson 1014

Capacity: 1016kWh, Nominal power kW: 800, Nominal power kVA: 1000, Nominal voltage (50Hz): 400 , Protection: IP54, Heating cooling system: HVAC , Max current (A): 1600, Nominal current discharge (A): 400, Discharge current (C): 1.5, Battery type: (NMC), On grid and off-grid applications: Yes; Gross weight [kg]: 16000; Accessories: Battery, Control Panel, Stahldach, 12touch screen, Fire extinguish system, AEG Bi-directional Storage Converter, 20ft Container

: 10000 m³/h Weight: 700 kg Motor output: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stationary sharpening bench for cleavers OSAMA Knife Grinder 1000 Technical data: Power supply: 380-400 V Engine power (hp): 1.5 Speed (rpm): 2800 Grindstone dimensions (mm): 125 x 60 x16 Grinding Angle (degrees): 0-50 Dimensions (mm): 1810 x 700 x 1810 Max. Grinding Length (mm): 1000 Weight (kg): 500 Features: Wide angle adjustment from 0 to 50 degrees Max. blade length of 350 mm Easy operation and setup via touchscreen Auto-stop when setpoints are reached Placing and fixing the knives on the grinding table by means of electrically activated magnets Adjustable grinding depth per operation Adjustable total grinding depth – auto stop when the set grinding depth is reached Adjustable sharpening length – only the length of the blades is driven, which speeds up the overall sharpening process Spacious storage ...

Note: The IBCs were filled with an acid for feed (main ingredient formic acid). Is not dangerous goods according to ADR, but subject to identification according to Hazardous Substances VO. The containers are empty, but not cleaned. The scope of delivery includes: 01x Water tank, used Total width: approx. 1,000 mm Total depth: approx. 1,200 mm Total height: approx. 1,160 mm Capacity: 1,000 litres incl. tap on metal, wooden or plastic pallet Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Travel: 1000mm/560mm/1100mm, Tool holder: ISO 50, Quill stroke: 125mm, Speed: 2000rpm, Feed: 3000mm/min, Rapid traverse: 6m/min, Max. workpiece weight: 800kg. Machine dimensions X/Y/Z: approx. 1020mm/1700mm/2650mm, Weight: approx. 7100kg, CNC 432 control, Hours: 7077h. Documentation available.

Key data: 63 mm, 1300

Twin screw extruder, conical Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of Make: 1994 Machine No.: 32061 Working hours: 32,303 h Screw geometry: conical for PVC-hard profiles Screw diameter: 63 – 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque of the gearbox: 1000 daNm Dynamic load rating of the return pressure bearing: 103600 daN Engine power: 43.0 kW, Drive motor: Baumüller DC motor Cylinder heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool Heating Zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible mass pressure: 500 bar Output capacity: approx. 150 - 200 kg/h for PVC-hard profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Cond ...

Riggs 1000 Three head filler Serial: TT1737 2014, Stainless, Three head filling machine, with 200L stainless tank with level detection, comes with a spare set of pistons so can fill from 25ml - 5L, height adjustable filling heads, with boxes of spare parts, manuals and drawings

: 28 t : 2000 mm : 1000 mm machine weight ab.: 11000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 28 t : 2000 mm : 1000 mm machine weight ab.: 11000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: max. 700 mm : : max. 1 mm : Cutting capacity structural steel: max. 1 mm Cutting capacity aluminum: max. 1 mm Cutting capacity stainless steel: max. 0,5 mm : : max. 1 mm : max. 1,5 mm weight of the machine ca.: ca. 150 kg dimensions: 1200 x 400 x 1200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications Center width mm 1000 Tip height mm 300 Grinding length mm 1000 Workpiece weight between tips kg 800 Load on the workpiece spindle during on-the-fly grinding Nm 200 X-axis - infeed movement Feed speed mm/min 0.01-8000 Linear measuring system, internal resolution mm 0.0001 Z-Axis - Table Movement Table speed mm/min 0.01-8000 C-axis - workpiece headstock Speed min-1 0-300 Drive power kW 5 Pick-up taper MK 5 / KK 6 Grinding spindles Power grinding spindle motor with water cooling kW 15 Grinding wheel circumferential speed m/s 35 (63) Grinding wheel, standard mm 600x80x203.2 Tailstock MK 5 pick-up taper Workpiece Tension Spring Hydraulic Retraction

Transnorm Rising falling Incline belt conveyor with leading belt GF 25000+4000-1000-900 RA2288 Technical data: Conveyor length (NL): 29000 mm ( 25000 mm riser segment + 4000 mm forerun) frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 29000 ( 25000 + 4000 ) Nominal / outside widt ...

Material width: 1000 mm workable material thickness: 1-20 mm min. part length: 150 x 100 mm Required power: 4 x 4,8 kW Rotation speed: 1400 rpm Length: 2220 mm Width: 1500 mm Height: 1500 mm Weight of machine approx.: 1550 kg

• \cf1Slim design (space requirement only 0.3 square metres) with electromechanical lift drive • Permissible load 1,000 kg • Lift mast with floor and ceiling bearing (included in scope of delivery) • Overall height 3,700 mm without ceiling bearing • Overall height 3,857 mm with ceiling bearing for room height 4,007 mm • Operation via remote-controlled touch panel outside the danger zone • Jog mode and semi-automated process sequences through the use of a microcontroller with touch panel visualisation • Motor with spring-applied brake • Button for operating the discharge flap • Button for activating the vibrator • Safety catch to prevent hazards caused by sudden and unintentional dropping of the load arm • Load support for Bohle container MCG 1200 and MCG 1600 (container not included in the scope of delivery) • Insertable drum frame with load turning gear for 200 ...

• Slim design (space requirement only 0.3 square metres) with electromechanical lift drive • Permissible load 1,000 kg • Lift mast with floor and ceiling bearing (included in scope of delivery) • Overall height 3,700 mm without ceiling bearing • Overall height 3,857 mm with ceiling bearing for room height 4,007 mm • Operation via remote-controlled touch panel outside the danger zone • Jog mode and semi-automated process sequences through the use of a microcontroller with touch panel visualisation • Motor with spring-applied brake • Button for operating the discharge flap • Button for activating the vibrator • Safety catch to prevent hazards caused by sudden and unintentional dropping of the load arm • Load support for Bohle container MCG 1200 and MCG 1600 (container not included in the scope of delivery) • Insertable drum frame with load turning gear for 200 l M ...

USED TETRA PAK A3 FLEX 1000ML SLIM FILLIN LINE FOR SALE YEAR 2017 Item #: Usm-207 Category Tetra Pak A3 CF/Flex Used A3 Flex 400v 1000ml Slim Filling Line Year 2017 A3 Flex 1000ml Slim Filling Machine, Version 400v, Year of manufacturing 2017, Working ours 4650, Speed 7000 Packs Per Hour Helix Accumulator ACHX 30, Lenght 50meter, Year of manufacturing 2017 Cardboard Packer 32, TCBP 32, Working hours 5450, Year of manufacturing 2017 Tetra Pak Shrink Wrapper, Year of manufacturing 2017 Tetra Pak Cap Applicator, Cap Flex 30, Cap type Helicap 23, working hour 5071, Year of manufacturing 2017 Line Controller 30 plus, Year of manufacturing 2017 Conveyors and Paper trolly PROCESSING EQUIPMENTS: Pasteuriser 8000 LPh, Type C85, Year of manufacturing 2017 Homogeniser, Tetra Alex 30, Year of manufacturing 2017 High sheer mixer, capacity 8000 LPh, Year of manufactuirng 2017 Mi ...

Weinig Unimat 1000 Star four-sided planer Working width 20-230mm Working height 8-160mm Number of spindles 6 Spindle system: Bottom 5.5kw 6000r.p.m Right 4kw 7000r.p.m Left 5.5kw 7000r.p.m Mountain 7.5kw 7000r.p.m Bottom 7.5kw 7000r.p.m Universal 7.5kw 7000r.p.m Automatic height and width setting Automatic Countertop Lubrication Pump Countertop driven rollers (1 corrugated roller for wet wood) Pusuw speed adjustable by variator 5-24m/min Weinig EM10 automatic material feeder

USED TETRA PAK TBA 8 1000 ML SLIM FILLING LINE FOR SALE Item #: Usm-204 Category Tetra Pak TBA 8 TBA 8 1000ml Slim Filling Machine, version 120v Cap Applicator 30 Flex, for helicap 23 Packer 70 conveyors and paper trolly

arm length: 4000 mm weight max. in kg: 1000 kg swivelling range: mindestens 160 Grad height: 4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Schneider Automatic Demga Hoist 500 KG The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 3500 mm weight max. in kg: 1000 kg swivelling range: mindestens 160 Grad height: 3000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Schneider Automatic Demga Hoist 500 KG The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 550 mm z-travel: 500 mm spindle taper ISO: 40 control: Heidenhain type: TNC 155 milling-head swivable +/-: boring spindle: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 1008 mm table height: 130 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC-Steuerung: FANUC FS-31iA5 (MAPPS 4) Fähigkeiten Drehlänge mm: 424 Max. Drehdurchmesser mm: ø: 370 (270 with turret 2) Stangenarbeitskapazität mm: 52 DREH-FRÄSSPINDEL Indexierungsspezifikationen: yes Verfahrweg X-Achse mm: 380 Verfahrweg Y-Achse mm: ± 105 Verfahrweg Y-Achse mm: 460 + 155 (ATC) B-Achse Indizierung Gra.: ± 120º Max. Spindeldrehzahl U/min: 12.000 Spindelantriebssleistung kW: 9/5.5 Werkzeugmagazine Werkzeugeplätzen: 38 Werkzeugaufnahme: Capto C5 Max. Werkzeuglänge mm: 250 (210 for tools below Ø70mm) Max. Werkzeugdurchmesser mm: Ø70/Ø130 (with/without adjacent tools) Max. Werkzeuggewicht kg: 5 Untere Revolverturm Verfahrweg X-Achse mm: 155 Verfahrweg Y-Achse mm: 610 Anzahl Werkzeugplätze: 10 Drehzahl max. angetriebene Werkzeuge U/min: 6.000 Angetriebene Werkzeuge Leistung kW: 1,5/1,2 Hauptspindel Max. Spindeldrehzahl U/min: 6.000 Sp ...

pressure: 100 t stroke: 10-130 mm no. of strokes: 30-90 Hub/min throat: 330 mm ram - range of adjustment: 100 mm table surface area: 950x660 mm ram surface: 540x440 mm hole in the table: Ø 230 mm table height: 1000 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine name: Chamber filter press used Manufacturer: Netzsch Type: 1000 /110 Year of Make: 1996 Design: Side-spar press Filter pressure: 15 bar Press capacity: approx. 2509 liters Procedure: Closed Filter area: Approx. 163 m2 Plate format: 1000 x 1000 mm Number of plates: 100 Panel Material: Polypropylene Plate Conveyor: Automatic Filter Cloth Washer: Yes Cake thickness: 30 mm Closing pressure: 385 bar Dimensions: L 9,347 x W 2,245 x H 2,435 mm Curb weight: 11,800 kg Tech. Documentation: Yes Note: It will be available from January 2025 Accessories: A control cabinet, a control cabinet, a hydraulic system, a light barrier, a filter cloth washer and drip plates Condition: Used Price: On request

GRONINGER PFS DFVN1000 FILLING MACHINE Filling and stoppering machine for presterilized disposable syringes. Can be used for testing sizes and small batches of products. For laboratories, test series and small batches. Machine built in 2009. CHARACTERISTICS - 2 rotary piston pumps with 2 filling needles. Gassing during filling and stoppering - Filling via rotary piston pump, peristaltic pump, time pressure, or in combination PRODUCTION - Output: 4.800 syringes/hr (max) - Syringe diameter: 8,15 mm (with stoppers) - Dosing range: 0,2 ml – 1,5 ml ENERGY - Electricity: 220/380 V, 50 Hz, 3 Ph+N+PE - Power consumption: 7 KVA (approx) DIMENSIONS - Footprint: 1500 ｘ 1135 ｘ 2000 mm (ca)

Power supply, converter, converter, power supply unit, Smart-UPS, spare battery, UPS system -Riello: Sentinel Dual UPS UPS system SDH 1000 -Connection: 220-240 V/50/60 Hz -Power: 1000 VA/900 W -Dimensions: 425/170/H435 mm -Weight: 37.3 kg

Steel pipe, flush pipe -Diameter: 1020mm -Wall thickness: 14 mm -Length: 5,400 mm with arch -Weight: 352 kg/m

Inductive sensor, electronic sensor, position encoder, displacement sensor -Manufacturer: MTS Temposonics, position encoder -Type: TTM-RB-M-1000-R -Measuring length: 1000 mm -Dimensions: 1200/53/H46 mm -Weight: 0.8 kg

Power supply, converter, converter, power supply unit, Smart-UPS -APC: Smart-UPS 1000 -Uninterruptible power supply -Connection: 220-240 V/50/60 Hz -Price: per piece -Number: 4 pieces -Dimensions: 435/170/H215 mm -Weight: 20 kg

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 1097 Kw, Rated Speed: 1500 Rpm, Injection Type: Electronic Fuelpump (EDC) , Generator KVA: 1000 , Generator Hz: 50 , Generator Volts: 230 , Generator Amps: 2510 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/perkins-4012-twg2-generator-10 00kva-used/242, , = More information =, , Empty weight: 9.205 kg, Type number: 4012 TWG2 GENERATOR 1000KVA

Switchgear, control, UV light -Honeywell dynamic self- check ultraviolet flame amplifier -Voltage: 220/240 V AC 50 Hz -unused in original packaging: 4 -without original packaging: 1 -Number: 3x available -Price: per piece -Dimensions: 125/90/H50 mm -Weight: 100 g

Face plate, rotary table, clamping plate -Outer diameter: O 1000 mm -Height: 100 mm -Weight: 574 kg

clamping plate, welding table, welding table, surface plate -Clamping plate: is steel -Width: 1000 mm -Length: 1000 mm -Height: 820 mm -Plate thickness: 50 mm -Plate is on: steel frame -Quantity: 1 piece available -Transport dimensions: 1000/1000/H820 mm -Weight: 466 kg