10 mw used for sale

This 4-axis Okuma LU15 M-2SC 1000 was manufactured in 1998. It features two tool turrets, live tooling with C-axis capabilities, and synchronous tapping for enhanced productivity. The machine includes an integrated tool setter for precise measurements and a programmable tailstock for versatility. If you are looking to get high-quality turning capabilities, consider the Okuma LU15 M-2SC 1000 horizontal turning machine we have for sale. Contact us for further details.

This 3-axis FERMAT VMF 1000 vertical machining centre was manufactured in 2008. It features a table size of 1300 x 600 mm and a maximum table load capacity of 800 kg. The machine offers impressive X, Y, and Z-axis travels of 1000 mm, 600 mm, and 570 mm, respectively. If you are looking to get high-quality machining capabilities, consider the FERMAT VMF 1000 machine we have for sale. Contact us for further details.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7700 € : 148.61 € : 80 to : horizontal verschiebbar : 250 mm : 1040 mm : 865 mm : 200x120 mm : 5 mm/s : 10 mm/s : 1710 mm : 700 mm : 2100 mm : 835 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details.

A Gernep cold glue and self-adhesive labeling machine for spirits is available. Nominal capacity: 12000bottles/h, direction of operation: RM, control range: 3000-18000bottles/h, bottle format volume: 700ml/750ml/1000ml, bottle material: glass. Including two cold glue units, two self-adhesive dispensers, cold glue unit height adjustment, diameter adjustment slide, breakage detection, bottle counter, side cam alignment, dating unit and Etima neck ring preparation. Documentation available. An on-site inspection is possible.

A Gernep cold glue and self-adhesive labeling machine is available. Rated capacity: 8000bottles/h, direction of rotation: clockwise, control range: 1400-9000bottles/h, bottle format volume: 700ml, tamper-evident label: available, bottle formats: 10, bottle contents: spirits, application: neck ring label/body label/back label/tamper-evident label, including optical label inspection, date coding, self-adhesive dispenser, two cold glue units, bottle counter and two different bottle locks. Documentation available. An on-site inspection is possible.

2 x Injection Molding Machines for Sale: - KraussMaffei KM 280-1000 CC BJ 2000 - JBOY 12M 1998

Floor-standing unit approx. 100l capacity Stainless steel version with agitator with boiler tilting device with outlet tap double-walled, with thermal oil/electric heater Heating 50 - 200°C

Panel saw manufactured in 2011. This HOLZHER 1255 3858/1-101 features a maximum cutting length of 3,300 mm and a cutting height of 2,200 mm, providing versatile cutting capabilities. With a powerful 4.0 kW saw motor and integrated control system, it ensures precision and efficiency. Consider the opportunity to buy this HOLZHER 1255 3858/1-101 panel saw. Contact us for further details.

sheet width: 1050 mm plate thickness: 4.0 mm thickness at Niro-steel: 3.0 mm distance between columns: 1200 mm blade length: 1150 mm no. of strokes: 46 - 69 Hub/min cutting angle: 1.30 ° Control: konv. oil volume: 100 ltr. total power requirement: 5.68 kW weight: 1100 kg From a maintenance workshop In good condition () Features: - Robust electro-hydraulic sheet metal shear - Electric motor-driven backgauge Backlash-free ball screw for backgauge Travel speed 100 mm/sec - Electric cutting length limiter Cutting length limiter to increase the stroke rate per minute - Manual cutting gap adjustment (lateral adjustment) - Front support table with recessed grips - Front finger/interference guard - 1x side stop with T-slot and millimeter scale - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF) The data for this ad was created with ModulMWS - the softwa ...

: neu : Bulgarien : 115600 € : 2184.84 € : 1090 mm : 3000 mm : 500 mm : 155 mm : 690 mm : 700 mm : 15 : 160 MK : 24 : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 22 kW : 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS turning length1.500 mm € 101 220,00 turning length2.000 mm € 104 720,00 turning length4.000 mm € 123 610,00 turning lengt ...

This APV Gaulin 1056 MC 18-5TPSC aseptic homogeniser is a 3-cylinder machine which is designed for ± 4.500 liter per hour with a maximum pressure of 345 bar. The homogensier is equipped with 2-stages with puppet valve cylinder, both stages manual controlled. Manometer. Motor: 45 kW - 380 V - 98 Amp - 50 Hz - 1.465 rpm. Stainless steel cladded. Oil pumping system outside the machine., Type of Machine: Homogeniser, Capacity: 4.500 liter per hour, Stages: 2 Stages, Max. Pressure: 345 bar, Valve cylinder: Puppet valves, Product: Dairy, Piston diameter: 44 mm, Motor: 45 kW - 380 V - 98 Amp - 50 Hz - 1.465 rpm, Dimensions: 180 x 110 x 180 cm, Weight: 2.115 kg

Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details Wort yield: 1,000 liters per brew Heating system: Steam Current status: Installed and ready for operation Availability: Immediately Scope of delivery  Brewhouse | Mini Brewery System | CI T 10 | 2012 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) Steam boiler | Mini Brewery System | - | 2012 (electric) Plate heat exchanger Hot water tank | 1,500 L Reverse osmosis system | ALFA | compact model  ...

Ultra Low Temperature Freezer ULT -86°C / 100 liters HAIER DW-86L100J Year of manufacture: 2020 Capacity: 100 l Temperature range: Min: -86 °C / Max: -40 °C Inner Dimensions: 330mm481mm630mm (WWH) External Dimensions: 770mm660mm810mm (WWH) Noise level: 46.8 dB Weight 108 kg Applications: Laboratory Number of doors: 1 door 2 compartments Direct cooling Defrost Mode: Manual Equipment tested at -50°C and -80°C

Centrifugal Pump Link Casing Pump Water Pump Fuel Pump Oil Pump Manufacturer: DICKOW PUMPEN Type: HZS 1023 Q: approx. 60 m³/h H: 45 m self-priming Connection approx. Ø 125 / 100 mm Engine: Ex Gesxchütz E EX de IICT 15 kW 1440 rpm 380/660 V Dimensions LxWxH approx. 1600 x 500 x 650mm The pump type is particularly suitable for systems where geodetic suction heights have to be overcome. For liquids that are free of solids and do not have too high viscosity. Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Key data: 2250 mm, 100800 , 5200

This used STOW pallet rack is a compact, high-performance, heavy-duty rack for industrial storage needs. The modular high rack is ideal for logistics, industry, large warehouses and freight forwarders. With a shelf load of up to 2,250 kg per level and a bay load of up to 9,000 kg, the immediately available pallet racking system offers an efficient solution for the storage of Euro pallets and heavy load units. PRODUCT DETAILS: Height: approx. 520 cm Depth: approx. 110 cm Length: approx. 10080 cm Shelf load: 2,250 kg Trusses: approx. 270 x 12 x 5 cm PNB0472 Colour trusses: yellow lacquered Stand: approx. 520 x 110 cm, pre-assembled Colour stand: blue lacquered Levels: Ground + 2 Pallet spaces: 333 incl. floor spaces Design: Used STOW SCOPE OF DELIVERY: 037 x Stand (approx. 520 x 110 cm), pre-assembled 144 x trusses (approx. 270 x 12 x 5 cm) PNB0472 288 x Locking Pins P ...

Key data: 2250 mm, 100800 , 10500

This used STOW pallet rack is a compact, high-performance, heavy-duty rack for industrial storage needs. The modular high rack is ideal for logistics, industry, large warehouses and freight forwarders. With a shelf load of up to 2,250 kg per level and a bay load of up to 9,000 kg, the immediately available pallet racking system offers an efficient solution for the storage of Euro pallets and heavy load units. PRODUCT DETAILS: Height: approx. 1050 cm Depth: approx. 110 cm Length: approx. 10080 cm Shelf load: 2,250 kg Trusses: approx. 270 x 12 x 5 cm PNB0472 Colour trusses: yellow lacquered Stand: approx. 1050 x 110 cm, pre-assembled Colour stand: blue lacquered Levels: Ground + 4 Pallet spaces: 540 incl. floor spaces Design: Used STOW SCOPE OF DELIVERY: 037 x Stand (approx. 1050 x 110 cm), pre-assembled 288 x trusses (approx. 270 x 12 x 5 cm) PNB0472 576 x Locking Pins ...

Operating hours: 29,000 | Number of PNC axes: 9 | Number of spindles for driven tools: 3 | MAIN SPINDLE | Max. bar diameter: 10 [mm] | Max. spindle speed: 16,000 [rpm] | C1 axis: 0.001 [degrees] | COUNTER SPINDLE | Max. bar diameter: 10 [mm] | Max. spindle speed: 12,000 [rpm] | C4 axis: 0.001 [degrees] | Oil basin | Chip collection basin | Parts removal | Parts ejector | Coolant tank | Extensive tool holder package | LNS Tryton 112 loading magazine, 3200 with hybrid drum | The machine can be viewed under power by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sale!

Complete Mini Dairy Line – Seital 05X Separator + Malldison 1,000 L/h Self‑Heated Pasteuriser + Fords Little Gem 6/2 Glass Pint Bottle Filler, Ideal for: Small dairies, farm bottling, cream production, test plants and product development. Line is designed for approx. 1,000 L/h milk processing into glass pint bottles., 1) Seital 05X Cream Separator, • Make/Model: Seital 05X disk‑stack centrifuge, • Application: Milk clarification / cream separation, • Typical capacity: up to approx. 1,000 L/h (depending on product and setup), • Construction: Stainless steel product contact parts, • Features:, • Designed for continuous operation in dairy service, • Compact footprint – suitable for small plants/farm dairies, • Complete with bowl, drive and base frame, • Condition: Used, in good overall condition; available for inspection, • Suitable for: Whole milk separation int ...

Manufacturer: Wenzel Type: RS 1012 / CNC Year of Manufacture: 2003 Type: CNC Coordinate Measuring Machine Measuring Volume - X-axis measuring range: 2,000 mm - Y-axis measuring range: 1,000 mm - Z-axis measuring range: 1,200 mm Measurement Accuracy - Maximum permissible length measurement error (MPE): 15.0 micrometres + (L / 45.0 mm) micrometres - Maximum overall: 50.0 micrometres (valid across the entire measuring range) Probing System - Probe head: Renishaw PH10 M - Probing system type: Renishaw TP20 - Probing system number: 153R13 Find more here - / Contact us at -

A Gebrüder Irle CNC large-format deep-hole drilling machine is available. Drilling capacity steel: 40mm, max. drilling depth: 1600mm, drill spindle adjustment: 350mm, vertical drilling unit adjustment: 700mm, power: 30kW, speed: 2940rpm, field range constant power: 1-3, armature range constant torque: 1-35, max. drill spindle torque: 1500Nm, rated speed: 163rpm, spindle flange diameter: 200mm, quill diameter: 2000mm. Feed: 500mm/min, rapid traverse: 1200mm/min, max. feed force: approx. 34.3kN, display: 0.005mm, vertical adjustment travel: 700mm, longitudinal adjustment travel: 13000mm, transverse adjustment travel: 650mm, swivel: 85°. Clamping plate dimensions X/Y/Z: 12500mm/1000mm, guide bed dimensions X/Y: 3350mm/455mm, controls: Heidenhain TNC 310. Documentation available. An on-site inspection is possible.

: 80 : 10 Stück length: 1000 mm width: 800 mm height: 600 mm weight: 40 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 6500 € : 125.45 € : 60 to : fix : 250 mm : 1040 mm : 180x120 mm : 4 mm/s : 10 mm/s : 1710 mm : 700 mm : 2100 mm : 800 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0007 : 217 € : 1 : 835 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0032 : 228 € : 1 : 835 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9656 : prompt, Zwischenverkauf v : Türkei : 2400 € : 1 : 1 : 1050 mm : 1 mm : 56 mm : 1400 mm : 700 mm : 1120 mm : 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lift LW 1000-4

Automatic lathe Genini ROTOUR 100 Max working length 300 mm Max turning diameter round Ø 140 mm, square 100×100 mm 15hp spindle motor Shank Speed 2050-2800-4100-5600rpm 3HP Pump Motor 0.5hp grinder motor Net price

Riggs 1000 Transfer pump 2012, stainless, filling range from 125ml to 1200ml, they pump directly from cooking kettles, tote bins, mixing vessels or IBC, provide damage free transfer of hot or cold liquid, semi liquid and suspended solid products

set for 31,5 x 24 caps. 3 capping heads

type of closures: 28 x 15 working direction: rotating turret

Machine is for Guala Closures with 5 capping heads

General SKU327X685 MakeDe Dietrich LocationBarneveld CEcheck TypeBE 1000-1200 Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume1200 Ltr. Motor4 KW Pressure6 Bar Vacuumcheck Specified Features - Stirring vessel Closed stirring vesselcheck Capacity1000 l. (1458 l.) Vessel sizesø 1200 x 1550 mm Dished bottomcheck ManholeDN 350x400 Top connectionscheck Outletcheck DN100 with pneumatic valve Max. temperature—5 / 90 °C With propellor stirrercheck Motor4 kW (400 V, 1500 rpm, (Ex)) Speed mixing shaft300 rpm MaterialGlass - Enamel (3009U) Information No.69208 Year of construction2008 Mounted on legscheck Floorspace1,60x1,60 m Total height3,70 m Weight2200 kg Extra SpecificationsWith Endress+Hauser flow meter, level meterNew arrivalsStirring vesselsDe DietrichNew arrivalsStirring vessel ...

A CNC precision grinding machine Peter Wolters with two opposing grinding wheels and a workpiece/carrier disc system for simultaneous machining of both workpiece sides is available. Carrier wheel outer diameter: 1050mm, carrier wheel ring diameter: 290mm, max. workpiece height: 100mm, machine dimensions X/Y/Z: approx. 2350mm/3400mm/2400mm, weight: approx. 7000kg, control: Siemens Simatic S7-400 with WinCC visualization, operating hours: approx. 7000h. Including twin loader, buffer table, CBN fine grinding wheels, dressing wheels, ultra-fine measuring system, temperature monitoring, remote maintenance system, wear compensation and alignment system. Without filter system and cooling system. Documentation available. An on-site inspection is possible.

Lippert belt conveyor belt transfer GF 1000-550-400 RA2508 Technical data: Conveying length (NL): 1000 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB 5 E Year of construction: 2001 Optionally available: Supports Side guides frequency converter for stepless speedcontrol Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 1090 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,30 scope of delivery: without supports and side guides For individual, prof ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: m Verkauf erfolgt mit Funktionsprüfung Auf Wunsch mit neuer Tischgeometrie gegen Aufpreis C-Achse zum Polygonschleifen B-Achse mit Handschwenkung Schleifscheibendurchmesser links 400mm Schleifscheibendurchmesser rechts auf Anfrage Innenschleifeinrichtung Reitstock mit Feinverstellung The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: Kelco 90 total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: m Verkauf erfolgt mit Funktionsprüfung Auf Wunsch mit neuer Tischgeometrie gegen Aufpreis B-Achse stufenlos Schleifscheibendurchmesser links und rechts 400mm Innenschleifeinrichtung Reitstock mit Feinverstellung Sinuslineal am WSS Kel-Set Passive Lämgspositionierung Movomatic TMP91 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : 1030 mm : 10 mm : 6 mm : 10 1/min : 3 ° : 7 : 5000 mm : 11 kW : 100 l : 900 mm : 1550 mm : 1150 mm : 1600 mm : 1900 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 25200 € : 481.32 € : 100 to : fix : 500 mm : 700 mm : 1050 mm : 25 mm/s : 2 mm/s : 1900 mm : 1200 mm : 2450 mm : 1300 kg 2 speeds control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : 1030 mm : 8 mm : 5 mm : 14 1/min : 3 ° : 7 : 500 mm : 7.5 kW : 100 l : 900 mm : 1550 mm : 1150 mm : 1600 mm : 1800 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 91200 € : 1723.68 € : 100 to : 500 mm : 600 x 900 mm : 700 x 1100 mm : 750 mm : 320 mm : 100 mm/s : 8,5 mm/s : 165 mm/s : 11 kW : 2100 mm : 1900 mm : 3350 mm : 7300 kg : 240 bar : 30 to : 200 mm : 120 mm : 170 bar : 52 mm/sec. : 700 x 400 mm 2-hand control Control over SPS Adjustable die cushion stroke Lubricant-free ram guide light barriers User Manual in German according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight: 500 kg 0: 65 °C heating capacity: 54 kW 0: 2x300 l total power requirement: 84 kW weight of the machine ca.: . t dimensions of the machine ca.: . m No. 407 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compact cell Fanuc ArcMate 100/7L with R30iB control , Lorch S3 pulse welder new Number of axes: 6 Max. load capacity: 7Kg Max. working range: approx. 1633 mm Year of Make: 2016 Table surface each 750x500mm Total dimensions: approx. 2500x1500x2200 Total weight: approx. 2000kg In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

ABB Robotics IRB 1400 S4C + M2000 robot with Fronius Transsynergic 4000 welding machine and TC 1000 cleaner Number of axes: 6 Max. load capacity: 5 kg Max. working range: 1450 mm Year of Make: 2004 Scope of delivery: robot, controller, cable, teaching panel, circuit diagrams Floppy disk drive for data backup, Fronius Transsynergic 4000 pulse welding machine, Fronius robot hose package In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

CIP cleaning, extra long infeed conveyor of 2000 mm, Belt width: 1000 mm, Frying length: 9000 mm, Heating: Thermal oil, 360 kW, Steam: 4 - 8 Bar, Compressed air: 2 - 4 Bar, Power: 3 x 400V, 50Hz, 30kW, Dimensions: 12600 x 2100 x 3400 mm, Weight: 10000 kg

Drum volume: 2200 liters, Capacity: max. 1000 kg, Power: 3 x 380V, 50Hz, 3.2kW, Dimensions: 1800 x 1950 x 1950 mm, Weight: 800 kg

General SKU095T577 MakeZondervan Sneek No.S-2109-01 Year of construction1989 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket1 Bar Main Features MaterialStainless steel Volume100 Ltr. Motor1.5 KW Specified Features - Tumbler mixer Tumbler mixer(1x) Capacity100 Ltr Diameter660mm Cylindrical length420mm Inletdia. 270mm Outletdia. 50mm With jacketcheck Max. temperature200 Degr. C. With motor1,5 KW, 220/380 Volt Speed mixer± 27 Rpm MaterialStainless steel 1.4401 (316) Information With switchcheck Floorspace1,5 x 0,8 m Total height1,4 m Weight430 kg Extra SpecificationsThe double jacket on this machine can only be used for cooling or heating, before or after the  :turning process. Not during! The same applies to the vacuum Tumbler mixersTea, herbs & coffeeZondervanMixers > Tumbler mixersIndustries > Food & Feed > T ...

General SKU345S713 MakeAlois Binderberger Albi (AT) No.1251 Year of construction1994 LocationBarneveld Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket9 Bar Main Features MaterialStainless steel Volume10000 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity10000 Ltr. (15175 Ltr.) Vessel sizesdia. 2400x3440 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionsDN250, DN200, DN100, DN80, DN50, DN25 OutletDN80 Half coil jacketedcheck (340 Ltr.) Max. temperature-25/130 °C With paddle stirrercheck (HWL80-D) Motor15 kw, 400 Volt (EEx de IICT4) Speed mixing shaft71 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Floorspace2,6x2,6 m Total height3,5 m Weight4200 kg ATEX compatiblecheckCatalysts & fillersStainless Steel ReactorsSolventsDetergent & surf.Oth ...

General SKU248S161 MakeLMG Lübecker Maschinenbau Geselschaft mbH TypeAK-6.1002 No.4240077 Year of construction2004 LocationBarneveld Pressure Working pressure6 Bar Working pressure jacket4 Bar Main Features MaterialMild steel Volume2750 Ltr. Motor22 KW Specified Features - Mild Steel Reactor MaterialMild steel Mild Steel Reactors Reactorcheck Capacity2750 ltr Vessel sizesdia. 1400x3000mm Conical bottomcheck Dished top sidecheck Manholedia. 400mm Top connectionsDN150 (1x), DN 80 (2x), DN25 (2x), DN15 (2x) OutletDN80 With jacket(254 / 187 ltr) Max. temperature300 degr. C With propellor stirrercheck Motor22 kW 380-420/660-725 Volt Speed mixing shaft1460 rpm Information Floorspace1,7x1,7 M Total height4,0 M Weight4500 Kg CEcheckCatalysts & fillersSolventsDetergent & surf.OrganicsE-waste & metalLubricants & oleoDyes & pigmentsMild Steel ReactorsPlastic & ru ...

General SKU056U362 MakePUC Probst & Class TypeK-100 No.91079 Year of construction1991 LocationBarneveld Material Rotor materialStainless steel Main Features MaterialStainless steel Motor5.5 KW Inlet diameter50 mm Specified Features - Colloid mill MaterialStainless steel Colloid mill in line(1x) Rotor sizesø 100 mm Teethed rotorcheck Without hoppercheck InletDN50 OutletDN50 Motor5,5 kW (400 V, 2905 rpm (Ex)) Speed2905 rpm Information Mounted on wheelscheck With switchcheck Floorspace0,9 x 0,6 m Total height1,3 m Weight125 kg ATEX compatiblecheckDiscountColloid millsPuc Probst & ClasDiscountMills > Colloid millsBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherland ...