127,837 used machines on RESALE, but how to find them? Machine Search
Oil tank double-walled 1000 L fresh oil tank - year of production 1998 - material St 37 / 2 - double-walled Incl. oil pump and all fittings and pipes, cables, etc. Transport can be arranged at low cost.
Tip height: 102 mm Top width: 450 mm Spindle bore: 32 mm Reduction gear Links.-right rotation 2-stage drive Vario speed: 270-3000 rpm Knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock Quill: MK 2 Dimension (Lxwxh): approx. 140 x 56 x 123 cm Weight: approx. 550 kg Accessories available Manual available The machine is located in a clean good condition!
RECON Part number: 0422 6979 ---------------------------------------------------------------------- ---------- Please note: We have various other RECON parts from different manufacturers and types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Gear hobbing machine MIKRON 102 Max. workpiece diameter 120 mm Max. Modul 2 Max. lenght of teeth 130 mm Min./max.nr of teeth 6 – 325 Angle on helical gears 0 – 90 °
Material: mild steel Drive: 45 KW Weight: 2000 kg Dimensions: 1500 x 1500 x 1600 mm
Treif Derby 100-CE dicer, performance 1.2 t/h, max. cutting-off length 0.5-32 mm, max. infeed length 400 mm, 1,4 kW You are very welcome to test the machine in our facility in Koblenz, Germany.
Two-shaft shredder KS 1000/2 INDIVIDUAL - ADAPTABLE - ON YOUR RIGHTS Product information The 2-wave shredder KS 1000/2 is a powerful shredder that has a completely mechanically machined, solid grinding chamber. It is composed of 4 parts which are completely plugged into each other and screwed together, this gives an enormous stability and is very maintenance-friendly. The machine is powered by 2 high-performance electric motors that drive hexwaves running against each other via high-quality and robust planetary gearboxes 2. The hexagonal shafts can be equipped with individually made cutting discs of different thicknesses. The grinding chamber of the KS 1000/2 is double protected by wear plates and wear rings and is therefore completely armoured against wear. specifications: -Cutting room: 1000×600 -Drive: 2x15kW -Speed per shaft: 16.5 rpm -Advantage: Constant torq ...
Metallography Mounting presses ECOPRESS All ECOPRESS presses can be programmed by the user in a simple manner, that the mounting process runs fully automatically. When the ECOPRESS 50, one program can be stored in the control electronics. A rugged bayonet allows quick and safe operation. The ECOPRESS series offers a wide variety of different size of molds of 25 - 50 mm in diameter. At the same time two samples can be embedded per cylinder with an intermediate piston. Alternatively, machine type of ECOPRESS 200 twin-piston for up to at the same time 4 embeds is available. When baked in the samples into plastic granules are melted, that the sample under heat and high pressure wraps pore-free and then through a press cylinder, electronic control, integrated cooling for solidifying. ECOPRESS 50 one cylinder, electronic control, full automatic program ECOPRESS 100 one pressing ...
We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 1,000 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 ...
roll diameter: 400 mm roll length: 1000 mm rolls drilled: peripher Nip adjustment: hydraulisch total power requirement: 2x 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 630 mm Working height: 3,300 mm Motor output: 7,5 kW Number of knives: 4 St. Feed speed: 7 + 14 m/min. loading dimensions L x W x H: 1070 x 1200 x 1060 mm weight: 1050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 8 St. range L-W-H: 720 x 580 x 1000 mm weight: 128 kg : 100Kg je Lade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt, mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 11 kW weight of the machine ca.: 3,36 t dimensions of the machine ca.: 1175x1340x1650 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Discus Werke DSH 600/1000 Side Surface Grinding Machine This type of machine is a machine with a motor-driven grinding spindle. The clamping and grinding of the workpieces is carried out with clamping devices tailored to the respective work. The devices are attached to the machine bed. The column saddle on which the motor spindle is mounted serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side Surface Grinding Machine Cooling lubricant: Isocool 1020 BF Coolant volume: 400 liters Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of construction: 1964 Condition: used The side surface grinding machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, ...
Wexiödisk WD-100GR Granulate Dishwasher The WD-100GR is a granulate pot washing machine that can wash with or without granules. The HACCP function in the machine's control program ensures compliance with hygiene requirements. The machine is a continuous model for simplified logistics and improved ergonomics and hygiene. It is also equipped with efficient centrifugal wheel technology. Steam reduction as standard Save energy and drying time with the ECO-FLOW condensing device No pre-washing or scrubbing by hand thanks to vigorous washing with water and granules Great hygiene and fast drying with centrifugal cycles Heat recovery and a condensation battery reduce the steam in the room Complete dishwashing system with loading table and trolley Easy maintenance - can be done from the front or from the side Effective dishwashing and high capacity with double dishwashing sy ...
SOLD! ABC ENGINE 8XDXC 886KW @ 750 RPM diesel engine ABS BJ 2002
USED STAINLESS STEEL 1700 LITRES IPROCOMSA V MIXER REF#: C4291 1700 liter V mixer manufactured by Iprocomsa in stainless steel mounted on stainless steel lined structure with butterfly valve. Pneumatic vibrator at the bottom of the cone. With documentation and electrical panel. Dimensions: Inlet(x2) .. ø 580 mm Outlet flange ... ø int 250 mm ø ext 395 mm Total height .. 2910mm (when the mixer is spinning) Total height without turning: .. 2510mm Total length: ... 4010mm Total width: ... 1300mm Valve outlet to ground: ... 310mm General characteristics: Manufactured by IPROCOMSA Model B-1000 Type V mixer Material Stainless steel Year built 1998 Technical characteristics: Capacity 1700 L
Handtmann hanging line consits of Handtmann VF 100 and PLH 216, vacuum filling machine Handtmann VF 100, vacuum stuffer for filling, portioning, linking, case holding device, PCK control, with loading device, filling performance (variable adjustable) max. 3000 kg/h, filling pressure max. 55 bar, with Handtmann PLH 216 hanging machin.
Rotary vane vacuum & compressor - running dry Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Motor: 400V DS Suction power: 100 - 140m3/h Compression pressure/ vacuum: optional +-0.5bar / +-1.5 barStatus: Preliminary
Rotary vane vacuum compressor - running dry Manufacturer: Becker Type: KVT 3,100 Motor: 400V Status: Generalueberholt and repainted Performance: 12 months; ready for use
The CE40 belongs to the series of our high-pressure machines with an electric drive for a pressure of 100 to 2000 bar and a volume flow of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal moldings and circumferential stainless steel side frames. The front wheel and the two large rear wheels including a parking brake ensure easy manoeuvring and stable stationing. A lifting eyelet facilitates transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 30 kW (50Hz) / 33 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A ...
Thermotron Temperature Chamber Here we offer you a Thermotron temperature chamber. Water-cooled Thermotron temperature chamber SE-1000-5-5 Dimensions of the working area - WxDxH: 102 x 100 x 97 centimeters Working range volume: 986 liters Temperature uniformity: ± 0.5°C Temperature range: -70ºC to 180ºC Temperature control tolerance: 0.3°C Feed dimensions - WxDxH: 122 x 188 x 218 centimeters Electrical requirements 400/3/50 28.4 A Refrigerant: R-404A / R23 Approx. Weight: 862 kg Type: Thermotron SE- 1000-5-5 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers are subjected to a test run, which ...
; ready for operation
conus taper: HSK 100 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer you here a used pallet rack stand of the Manufacturer Polypal for sale. Technical data for the pallet rack stand: Shelving system: Polypal Type: Stockpal Included in delivery are: 01x pallet rack stand, used Material color: sendzimir galvanized Profile abm.: 85 x 63 x 2,00 mm Profile Type: SKMO5220P Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 1,800 mm high 1,100 mm deep General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
DYNAJET 1000me - 400V/50Hz/63A Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The DYNAJET 800me is the world's first device with 800 bar working pressure and dry-closing gun without control cable. In addition to its high performance, the Professional high-pressure cleaners above all due to their compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal post-calculation Drive - Automatic star/tria ...
The IQ control keeps the set air flow the same during runtime. MA-201030 Optional: In stainless steel, , hose set, VOC, filter change signal, start/ stop via external 24V - the compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dust and gases - the air flow is 850 m³/h - the dimensions are 1197 mm x 600 mm x 790mm (HxLxW) - Weight 140 kg - Noise level less than 61 dBA Options: - Suction hose in the necessary length - Connection sleeves - various suction nozzles Typical applications : Marking laser Engraving laser Cutting lasers Welding laser Soldering and welding fumes
Helium leak detector Manufacturer: Leybold Type: UL 100 Condition: Tested and ready exhausted: Oil-lubred pump Connection: 230V Delivery time: 1 where. (u.ue.V.); Ready
maximum number of results exceeded
please refine your search
