1 mw gas used for sale

Steel pipes, flushing pipes -Diameter: 1070 mm -Wall thickness: 15 mm -Length: 4,350 mm -Weight: 403.2 kg / m

Gear motor, electric motor, electric gear motor -Motor: Siemens 2KG33310RE304BA1 -Speed: 35 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 25 x 40 mm -Protection class: IP55 -with: fan -Price: per piece -Number: 3x available -Dimensions: 605/156/H210 mm -Weight: 27 kg/piece

Repair service Reparatur Service Part: Axle amplifier type MR-S11-100-E Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Lippert belt conveyor GF 1090-650-500 RA1425 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB-5E Year of construction: 2 ...

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper -Ventilation duct inlet with: filter -Outlet: Ø 390 mm -Dimensions: 1340/1100/H600 mm -Weight: 114 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DNC-40-160-PPV-A -Piston: Ø 40 mm -Stroke: 160 mm -Max. Pressure: 12 bar -Dimensions: 325/55/H55 mm -Weight: 1.5 kg

Repair service Reparatur Service Part: Axle amplifier type MR-S11-103-E Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Transnorm belt curve conveyor left GKF 70° degrees-770-600 IR600 RA1415 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length middle radius (NL): 1100 mm Frame width (NB): 770 mm with Motor 940 mm be ...

Clamping plate, welding table, welding table, straightening plate -Length: 2285 mm -Width: 1250 mm -Height: 780 mm -Sheet thickness: 75 mm -Weight: 1737 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 15 mm -Piston diameter: 32 mm -Piston rod: 16 mm -Price: per piece -Number: 6 pieces -Dimensions: 55/45/H50 mm -Weight: 0.2 kg/piece

Repair service Reparatur Service Part: Axle amplifier type MR-S11-100-Z33 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 700 mm -Length extended: 1280 mm -Width: 14 mm -Height: 38 mm -Price: per pair (left right) -Number: 5x pairs available -Weight: 1.8 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 140 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimensions: Ø 33/280 mm -Weight: 0.8 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 40 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 2 pieces -Dimensions: 85/56/H45 mm -Weight: 0.35 kg/piece

Repair service Reparatur Service Part: Axle amplifier type MR-S12-100-E Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Lippert belt conveyor GF 1710-650-500 RA1370 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1710 mm Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed: adjustable up and down with frequency converter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.07 / 0.37 S1 Deflection roller: Ø = 34 mm Drive drum: Ø = 81 mm Belt type: SNB 8 E year of construction: 2001 Optionally available: Suppo ...

Motor protection relays, relays, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor -Type: 3RN1011-1BB00 -Price: per piece -Number: 7x available -Weight: 130 g

Motor protection relays, relays, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor -Type: 3RN1010-1BB00 -Price: per piece -Number: 12x available -Weight: 130 g

Repair service Reparatur Service Part: Axle amplifier type MR-S12-100B-Z33 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Lippert belt conveyor GF 1285-650-500 RA1378 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1285 mm Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection drum: Ø = 64 mm Drive drum: Ø = 81 mm Belt type: SNB 8 E year of construction: 2001 Optionally ...

Pipe sealing cushion, leak sealing cushion, sealing plate, pipe sealing, penetration sealing -Pipe sealing cushions -Outer/Inner: Ø 233/194 mm -Height 53 mm -Delivery: steel / stainless steel cover plates possible -Number: 23 pillows available -Price: per piece -Weight: 0.6 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outer/inner diameter: 103/13 mm -Height: 20 mm -Hole circle: Ø 76/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 5x pillows available -Price: per piece -Minimum purchase: complete -Weight: 0.1 kg/piece

Key data: 130 mm, 4000 mm, 2500 mm

TOSHIBA BP-130R22 Year 2007 SPINDLE DIAMETER 5.12" (130mm) TAPER IN SPINDLE #50 VERTICAL TRAVEL, Y-AXIS 100" (2500mm) CROSS TRAVEL, X-AXIS 160" (4000mm) SPINDLE TRAVEL, Z-AXIS 28" COLUMN TRAVEL, W-AXIS 60" TABLE SIZE (BUILT IN B-AXIS) 86.6" X 70.8" TABLE LOAD CAPACITY 44,000 LBS TABLE INDEXING B-AXIS 0.001 DEGREE SPINDLE SPEEDS (3-RANGES) 5-2500 RPM EQUIPPED WITH: TOSNUC 888 CNC CONTROL 60-STATION AUTOMATIC TOOL CHANGER THROUGH SPINDLE COOLANT CHIP & SPLASH ENCLOSURE CHIP CONVEYOR 40/30 HP SPINDLE MOTOR NOTES: INSPECT IN PLANT UNDER POWER

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/111 mm -Height: 18 mm -Hole circle: Ø 152/8 mm -Delivery of: steel/stainless steel cover plates possible -Number: 13x pillows available -Price: per piece -Weight: 0.4 kg/piece

Repair service Reparatur Service Part: Axle amplifier type TRS-100-B Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Lippert belt conveyor ascending belt GF 1995-550-400 RA1656 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 1995 mm (leading belt 560mm + ascending belt 1435mm) stand width (NB): 550 mm Belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor DT80K4/BMG/MM05 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Drive pulle ...

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Martonair type: M3332 150 DF -Stroke: 150 mm -Piston rod: Ø 25 mm -Number: 2 pieces available -Price: per piece -Dimensions: 90/130/H640 mm -Weight: 9.7 kg/piece

Repair service Reparatur Service Part: Axle amplifier type MDS-A-V2-1005 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Technical details: Manufacturer: Transnorm Type: belt curve 60° TS 1500 100 belt bend conveyors POS. 164 Year of construction: 1996 Angle: 60° Direction: Right Nominal radius: approx. 600 mm Width: 400 mm Usable width be expanded through fit the outer Guide Strap type: KT 58 Number: 1 x (article no. 20140058) Condition: Used / fully functional Color: Grey More information: incl. Guide Gear motor Manufacturer: SEW eurodrive Features: Construction year: 1996 condition: good (used) Nominal / inner radius in mm: 600 Belt width in mm: 500 angle: 60° Running direction: RIGHT Engine type: SEW Eurodrive scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen u ...

Connectors, plugs, sensor modules, G2 flat modules -4-pin -Quantity: 10 pieces -Price/Sale: complete -Weight: 0.1 kg

Repair service Reparatur Service Part: Axle amplifier type MDS-A-V2-1010 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x93 mm -Dimensions: 144/144/H93 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x80 mm -Dimensions: 144/144/H80 mm -Weight: 0.7 kg

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V1-150 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Beumer bar band 1360-680-430 + injection unit 30° 800-680-430 RA1262 Injection unit 30° consisting of a clock band and a triangular band. Scaffolding and cladding are made of profiled steel sheet. The drive is carried out by means of a gear edgear motor and belt drive. Without control and connections to upstream and downstream conveyors Technical data: Manufacturer: Beumer Year built: unknown Condition: good (used) Engine: fully functional Data Triangular Band Type: Injection unit 30° 800-680-430 Angle (injection): 30° Conveyor length (FL): 1360 mm Nominal/outer width (NB): 680 mm Usable width (NUB): 430 mm Wide transport belt: 393 mm Drive drum: dia. 74 mm Deflection roller: 63.5 mm Funding speed: 2.0 m/sec Engine power: 0.55 kW Data clock band: Type: Tape 1360-680-430 Function: Acceleration tape Conveyor length (FL): 800 mm Nominal/outer width (NB): 680 mm Usable width  ...

Conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, belt belt, flat belt, drive belt -Width: 85 mm -Length: 14850 mm -Transport dimensions: 455/455/H85 mm -Weight: 19 kg

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-1005 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Transnorm conveyor belt GF 19480-600-500 RA2107 Technical data: Conveyor length (NL): 19480 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 19480 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zent ...

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low voltage networks, circuit breakers for transformer, generator and system protection -Schneider Electric: Type NSX 100 NA -Rotary drive with: extension -Terminal cover: 2 -Dimensions: 290/105/H510 mm -Weight: 2.3 kg

Control of wind turbines, frequency converters, frequency converters, drive converters, controllers, variable speed drives -KEB: Combivert P6 pitch converter -Mat.No .: KEB 19P6H7G-YRXO -Power: 36 kVA -Input: AC 400/480 V 50/60 Hz/DC > 150 V -Dimensions: 1610/350/H645 mm -Weight: 146 kg

Fan filter, fan array, air cooler, control cabinet fan, filter fan -Rittal: SK 3241.100 filter fan -Filter: 230 V/40 W -Price: per piece -Quantity: 8 pieces -Dimensions: 255/255/H120 mm -Weight: 1.7 kg/piece

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-1010 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Transnorm Rising falling Incline with arch and forerun belt conveyor GF 12965-700-600 RA2076 Technical data: Conveyor length (NL): 12965 mm (3000 mm forerun + 6865 mm incline + 3100 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 12965 Nominal / outs ...

Thermal systems, fan heaters, heating elements -Space-saving fan heater: HVL 150 -Power: 150 W -Price: per piece -Number: 4 pieces -Dimensions: 110/105/H60 mm -Weight: 0.5 kg/piece

Power supply unit, converter, power supply, switching power supply -Phoenix Contact: TRIO-PS/1AC/24DC/10 -Input: 100-240 V -Output: 24 V -Price: per piece -Number: 2 pieces -Dimensions: 160/60/H130 mm -Weight: 1.4 kg

Offer 20142 Specifications: - Tapping capacity up to approx. M 16 - Tapping depth approx. 75 mm - Drill feed Ab + Auf infinitely variable - Projection 90 mm - Spindle speeds up to 290 rpm - Pneumatic connection with pressure reducer 6 bar - Pneumatic foot switch - Drive 400 V / 0.75 kW - Space requirement approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg

Bezel, steady rest, lynette -max. passage: Ø 250 mm -Centre height: 220 mm -Edition: Cast -Dimensions: 462/150/H505 mm -Weight: 39 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame made of: galvanized sheet steel -Dimensions: 2510/1910/H205 mm -Weight: 120 kg

Qty. 1 Second-hand aluminium strip caster – dismantled and in storage Mfc.: Tianzhong, China Built: 2005 Stopped: 2008 Dismantled: 2022, currently in storage Strip width: 1400 mm Thickness: 5 – 10 mm (AL S1000) 5 – 8 mm (AL S3003) Consisting of: Caster roller: 2 x dia. 750 mm x length 1600 mm caster work roll containing support roll chocks Caster shell: 2 x new dia. 820/700 mm x length 1600 mm Shell Alloy: ZTGT-2100 (Upgraded from 32Cr3Mo1V) Surface Hardness: 400-430 HB (43-46 HRC)

Lever measuring device, dial gauge, measuring probe, measuring probe, centering device, centrizer, 3D probe, probe insert -Hardness: Rockwell dial gauge -Diameter: 130 mm -Height: 50 mm -Weight: 0.6 kg