1 mw gas used for sale

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

Stock # U2421-1 Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 12500 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2550 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) legs carbon steel legs. New 2003. Last time used in chemical production.

Young used machine with very few hours of operation. Compact cable recycling plant with low connected load for 80 - 120 kg/hour (depending on material) This system can be operated with a pre-shredder via a conveyor belt as well as in direct insertion. The system still has the original, unground set of knives, so it can hardly have more than 40 to 50 operating hours. Therefore, we offer this system including a 12-month used machine warranty. Pre-shredders, conveyor belts, dosing accumulators, etc. can also be obtained from us.

The scope of delivery includes: 01x Tiefensteg, used Material color: sendzimir galvanized Total length: approx. 1,010 mm Stand depth: approx. 1,000 mm Clear span: approx. 895 mm Profile dimensions: C: 75 x 45 x 18 mm Technical data for the Tiefensteg: Manufacturer: Jung Heinrich Type: Esmena (TFZ 18) Truss support: approx. 55 mm Material thickness: approx. 1.50 mm Weight: 2.731 kg / pcs.

Stock # U2421-3 Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) carbon steel legs. New 2003. Last time used in chemical production.

• Grinding chamber with gradation for large individual parts • Dimensions: 3400 x 3750 x 2400 mm • Performance: Long sanding belts 5500 x 100 mm

100 ton x 3000mm 3i Graphic control 8 Axis With tooling

HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg

Saw blade Ø: 275 mm Cutting range at 90° round: 90 mm Cutting area at 90° rectangle: 75 x 75 mm Mitre cutting area at 45° rectangle: 75 x 75 mm Saw blade speed: 40/80 rpm Drive motor: 380 V, 0.5/0.9 kW Space requirements: 700 x 600 x 1580 mm Weight: approx. 180 kg

Mueller Label Weaving Machine (Used) Model MBJ3 Year 2007 Jacquard 1152 Hooks 5800 yarns. Accessories on the machine: - 6 weft feeders 2 beams 2 cloth rollers new harness Droppers.

Temperature sensors, resistance thermometers, thermometers, thermocouples -Thermocouple: LC-05, unused Ovp -Type: LC-05/NI-100 D DM -Number: 6x available -Price: per piece -Dimension packaging: 150/20/H20 mm -Weight: 0.1 kg/piece

arm length: 4000 mm weight max. in kg: 1000 kg swivelling range: mindestens 160 Grad height: 4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Schneider Automatic Demga Hoist 500 KG The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EAGLE EVISION 1530 F2.0 AF FIBER laser, manufactured in 2013 in Poland with its excellent rigidity and high stability, achieves the highest precision and quality in machining stainless steel, structural steel and aluminium sheets. The EVISION 1530 F2.0 AF laser cutting machine uses a high-quality 2 kW laser beam, which makes laser cutting smooth and trouble-free. The edges of the machined sheet metal are distinguished by their extraordinary smoothness, and the workpieces themselves are free of any irregularities. The large work table with a length of 3000 mm and a width of 1500 mm, together with the state-of-the-art EAGLE CNC control, make the machine capable of handling even the most demanding machining operations. The fibre laser weighs approximately 20 tonnes. Technical specifications of the EAGLE EVISION 1530 F2.0 AF laser - laser beam power: 2 kW (2000 W) - CNC control: EAGLE  ...

Heavy duty castors, heavy duty wheel, tire, forklift drive wheel, caster, pallet truck castors -Manufacturer: Wheels-Vogel, heavy-duty bike -Wheel size: Ø 85 x 100 mm -Inside: Ø approx. 25.5 mm -Weight: 1.3 kg

EAGLE eVision 1530 F3.0 AF fiber laser was manufactured in 2012 in Poland. The machine used in the cutting process of workpieces made of structural steel, stainless steel, aluminium and copper, guarantees the user excellent dimensional and shape precision during the cutting process. The low cutting edge and small heat-affected zone ensure that the geometry of the workpiece does not change during processing at the edges of the material. The EAGLE fibre laser uses the energy-efficient and trouble-free IPG YLS-3000 laser source to supply the PRECITEC cutting head with a high-quality 3 kW laser beam. The cutting head is equipped with overload and collision protection, which automatically shuts down all machine axis drives if a collision with the workpiece is detected. Thanks to the special head positioning system (HRS), a constant distance is maintained between the head and the sheet meta ...

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 25 mm -Tube: Ø outside 50 mm -Stroke: 140 mm -Total length: retracted 360 mm -Admission: hole Ø 20 mm -Dimensions: 360/50/H80 mm -Weight: 3.9 kg

Clamping plate, welding table, welding table, straightening plate -Diameter: 1240 mm -Height: 975 mm -Plate thickness: 18 mm -Groove scale: 18 different diameters -Weight: 478 kg

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 160 mm -Hole spacing: 100 mm -Price: per piece -Number: 6 pieces -Dimensions: 160/20/H50 mm -Weight: 1.1 kg/piece

Strapping machine, packaging machine, strapping device, strapping set, dispenser, tape dispenser, cutting stand, vertical cutting stand -Cutting stand: vertical, mobile substructure -Cutting width: up to 1110 mm -Roll diameter. up to 660 mm -Dimensions: 760/667 / H1290 mm -Weight: 24 kg

cutting diameter: 105 mm saw band length: 1140 x 13 x 0,65 mm cutting width: 100/100x105 mm capacity 60 degrees: round: mm capacity 45 degrees: flat: 55 x 55 mm capacity 45 degrees: round: 60 mm total power requirement: 0,18 kW weight of the machine ca.: 18 kg dimensions of the machine ca.: ca.400 x 300 x 350 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 60° -Drawing: in the photos -Dimension: 25 x 165 mm -Length: 3562 mm (each 1 x 1818/800/387/190/122/85/60/55/45 mm) -Weight: 124 kg

We have 16 new MAN 28/32 engine connecting rods in stock. Part Number: 1152579

Haitian 1400 ton High Tonnage Year 2009 In production Can be inspected Availability Immediate

Grinding and polishing machine for the shoemaker's profession, cleaned and tested.

Circuit breakers, motor protection switches, star-delta switches, reversing switches -Siemens: Type 3RV1021-1EA15 -Price: per piece -Number: 8 pieces -Dimensions: 100/50/H100 mm -Weight: 0.4 kg/piece

Clamping plate, welding table, welding table, straightening plate -Storage plate with: roller conveyor -Height: 660 to 1000 mm adjustable on both sides -Steel frame: solid -Dimensions: 1120/515/H660 mm -Weight: 64 kg

Contactor, semiconductor contactor, contactor, power contactor, auxiliary contactor -Siemens: Type 3RT2027-1CL24-3MAO -Dimensions: 90/50/H145 mm -Weight: 0.5 kg

Circuit breakers, motor protection switches, star-delta switches, reversing switches -Siemens: Type 3RV1021-1DA15 -Price: per piece -Number: 3 pieces -Dimensions: 100/50/H100 mm -Weight: 0.4 kg/piece

- technically efficient, ready to work - after full service - motor power: 0,5 kW - disc diameter: 175 x 20 mm, 95 x 20 mm - pneumatic profile clamping

RAFAMET Wheel Turning Lathe XAD 112

Railway Wheel Lathe RAFAMET UBB112

ORDER NO. 7089 TECHNICAL SPECIFICATIONS - loading hopper inlet 1020x1230mm - rotor working width 1020mm - rotor diameter 348mm - main motor 22kW, 400V, 50Hz - pump motor 0,75kW - number of knives 50pcs - knife size 35x35x20mm - sieve 12mm - pressure drawer - electric autorewers - dimensions length / width / height 2000x1130x1530mm - weight 970kg ADVANTAGES – autorewers – for WEIMA WL 10 – German production – pressure drawer – very good condition – used chipper, DTR+CE documentation

Circuit breakers, motor protection switches, star-delta switches, reversing switches -Siemens: type 3RV1011-1DA15 -Price: per piece -Number: 7 pieces -Dimensions: 100/50/H85 mm -Weight: 0.3 kg/piece

Inductive sensor, electronic sensor -Pepperl Fuchs Part No.: 187480 -Dimensions: 245/225/H45 mm -Weight: 1 kg

Bank of 4x Bradley & Turton 120ton Upstroke Presses 20” / 500mm sq electrically heated platens Daylight adjustable 18” 2200psi 12” Ram diam. 12” stroke Return rams Solid state relay Hydraulic valve for Press up / down Quantity available: 4 complete with 1x pump unit.

4000 x 2000mm 10000w / 10KW FIBER laser

Safety control, safety door switch, switch buffer, bumper, safety contact buffer -Manufacturer: Haake, switch buffer - bumper -Type: HSB 1112-10 -Voltage: 50 V AC, 75V DC -Price: per piece -Number: 2 pieces -Dimensions: 2830/180/H110 mm -Weight: 7.2 kg/piece

Flexible exhaust pipe, exhaust pipe, flexible pipe, connecting pipe -Pipe: flexible -Connection: outside Ø 115 mm -Inside: Ø 111 mm -Dimensions: Ø 134 x 239 mm -Weight: 1.6 kg

Measuring device, measuring device, measuring machine, -Manufacturer: Fagor, position measuring system -Type: R NCT 13-005 3071 11A -Measuring scale: up to 2030 mm -Glass scale: 2070 mm -Dimensions: 3390/355 / H230 mm -Weight: 123 kg

Berstorff 6inch (150mm) Strainer Extruder Manufactured by: Krauss Maffei Berstorff Model: GE 150 K Screw Diameter: 6"/150 mm L/D Ratio: 6 Speed: Variable, up to 45 rpm Motor: 90 KW, 1500 RPM Transmission: Direct Drive, 3 steps reduction Gear Reduction Ratio: 33:1 Year 2009

Moving bezel, moving bezel, bezel, steady rest, lynette -max. passage: Ø 155 mm -Tip height: 265 mm -Technical drawing: in the photos -Dimensions: 445/60/H485 mm -Weight: 18 kg

Type 1300-2S Working width 1300 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 6.27 kW Transport dimensions 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania) Specifications Type 1300-2S Working width 1300 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the motors is 6.27 kW Dimensions for transportation 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania)

Type 1000-2S Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 4,12 kW Transport dimensions 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania) Specifications Type 1000-2S Working width 1000 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the engines is 4.12 kW Dimensions for transportation 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania)

Rotary indexing table HAU RK 6-1200, with 6 working spindles and 4 polishing units type PES, each 11 kW, 300 mm disc width, with oscillation, motorized height adjustment, liquid paste system (guns + pressure tank), incl. control cabinet Price and further details on request.

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Iveco FPT Engine: F 36 ETV P03 A 94 Engine No.: in production Power: 91.8 KW STAGE V Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Diesel Technical data generator: Generator manufacturer: Stamford AvK Generator type: UCI 274 C Gene. No.: in production Generator power: 100 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Hand & Remote Start Switch: Generator switch 4 poles Delivery: Built-in Tank: Execution: Base frame tank with drip pan Content / liter: 450 Dimensions of the power unit: Width approx. mm: 1.200 Height approx. mm:  ...

Stainless steel tank, stainless steel container, silo system, tank, lid, sealing cap -Closure cover: with spring clamp -Price: per piece -Quantity: 11 pieces -Minimum order: 4 pieces -Dimension: Ø 180 x 45 mm -Weight: 0.4 kg/piece

Cariba AV30/132 vertical cartoner, intermittent motion, reverse tuck closure, machine on wheels, carton size range: min. 15 x 15 x 70 mm (AxBxC), max. 200 x 120 x 300 mm (AxBxC), output up to 50 strokes/minute, electrics 400V/50Hz, machine footprint approx. 2900 x 1600 mm (LxW), machine height approx. 1695 mm, machine net weight approx. 900 kg

turning diameter: 300 mm turning length: 300 mm control: Sinumerik 810D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 810D 12-fold revolver bar loading device Breuning Irco Simag 42.1R (max. bar diameter 42mm) chip conveyor tail stock Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 550 mm max. Drehdurchmesser / max. turning diameter 300 mm max. Drehlänge / max. turning lenght 300 mm X-Weg / X-travel 170 mm Z-Weg / Z-travel 335 mm max. Stangendurchlass / max. bar diameter 45 mm Drehzahl / spindle speed 6000 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X / rapid feed X 36 m/min Eilgang Z / rapid feed Z 36 m/min. Antriebsleistung / drive capacity 20 kW Gewicht der Maschine ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibu ...

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, center mower lifting cylinder -Hydraulic cylinder: stroke 105 mm -Piston rod: Ø 23 mm -Recordings: Ø20 x 22 mm -Cylinder: outer Ø 58 mm -Dimensions: 475/70/H75 mm -Weight: 5.7 kg

Propeller mixer Manufacturer: FLUID (Lörrach) Type: SD 40.12A No.: 98.30893.10.1 Power: 1.5 kW Propeller blade diameter: 300 mm Speed: 1410 rpm with on/off button, with plug LWH: 450 x 280 x 1650 mm