1 mw gas used for sale

HADEF crane bridge 3.2 to, 19 m wide, 18m crane runway crane Overhead crane / gantry crane / overhead crane,5 m high, DONGES bridge 19 m wide, full working, German Crane, Year 2003 - Crane already dismantled, chassis can still be dismantled - free loading

Deck oven electric Miwe Condo CO 5.1208 used all-purpose oven stone slabs oven electric from Miwe Model Condo CO 5.1208 from year of construction 2013 tested and cleaned in stock immediately available for sale. The oven is with 5 shelves each 120x80cm with exhaust hood including steam condenser and proofing cabinet. - 5 tiers each 120x80cm - Each floor with Miwe FP control - each floor can be controlled separately - Top and bottom heat separately adjustable - each floor with separate steam function - with proofing cabinet - with steam condenser - with exhaust hood - Floor entrance height 17cm, interior height 16cm - Power: 49.1 kW - Built in 2013 External dimensions Width: 150cm Depth without hood: 132cm with hood +40cm Height without hood: 238cm with hood +20cm

COMPLETE TETRA PAK TPA/21-1000 SQUARE LINE, MANUF. IN 2001, CONSISTS: - TPA/21-1000 FILLER, V50, ONLY 14.000 RUNNING HOURS, INCLUDES A NITROGEN INJECTION STATION, - TCA/88 APPLICATOR - TCBP/70 WRAP AROUND PACKER, - CONVEYORS SYSTEM. CONVEYORS. EXCELLENT CONDITION WE PROVIDE DISMANTLING, INSTALLATION AND START UP SERVICE.

Vibro discharge tray DAXNER VAB 1200 0.525 kw power Spout ø 120 mm Counter flange

11 Meter Nagy PB-80 Pallet Rack Manufacturer: Nagy Type: PB-80 Shelf length: 11000 mm Stand height: approx. 10300 mm Stand depth: approx. 1100 mm Stand Type: PB-80 Profile: 80 x 60 mm Truss: screwed Stand surface: galvanized Clear field width: 3600 mm Truss: 3600 x 120 x 45 mm Truss surface: blue lacquered (RAL 5015) Number of fields: 3 Number of levels: 7 incl. floor parking space Max. pallet weight: 500 kg Permissible shelf load: 2000 kg Permissible field load: 12000 kg Pallet spaces: 84 Scope of Delivery 04 x Stand 10300 x 1100 mm galvanised 36 x Truss 3600 x 120 x 45 mm blue Technical Summary Stand: 10300 x 1100 mm, profile 80 x 60 mm, galvanized, truss screwed. Trusses: 3600 x 120 x 45 mm, blue (RAL 5010), 4 Euro pallets per level. Material & Construction: The galvanized surface offers long-lasting corrosion protection. In contrast to welded fram ...

For sale on "as is" basis Used Solar Gas Turbine Mars 100 SoLoNOx Natural Gas Location: Europe Year of manufacture: 2012 Output Power: 11,350 kWe Heat Rate: 10.935 kJ/kWe-hr (10.365 Btu/kWe-hr) Exhaust Flow: 153,245 kg/hr (337,950 lb/hr) Exhaust Temperature: 485 °C (905 °F) Frequency: 50 Hz Package hours: 27206 Gas turbine hours: 20547 Number of starts: 216 Housed on skid installed indoor with attenuating enclosure and fire detection and suppression system. Inlet System Barrier Filter and Silencer mounted on ancillary skid on the roof of the enclosure. Gear Reduction Box RENK MAAG GmbH. Type: GPF3-28, Output Speed/Freq. 50Hz - 1500rpm Generator Data: Electric Brushless AC Generator with Permanent Magnetic Alternator. Alternator data: 2.2kW. PF.9. 1 Phase. 240V/10A/120Hz. Gen Skid includes Lube oil tank, pumps, filters, start system with AC Direct Drive AC Motor, VFD, ...

GRONINGER PFS DFVN1000 FILLING MACHINE Filling and stoppering machine for presterilized disposable syringes. Can be used for testing sizes and small batches of products. For laboratories, test series and small batches. Machine built in 2009. CHARACTERISTICS - 2 rotary piston pumps with 2 filling needles. Gassing during filling and stoppering - Filling via rotary piston pump, peristaltic pump, time pressure, or in combination PRODUCTION - Output: 4.800 syringes/hr (max) - Syringe diameter: 8,15 mm (with stoppers) - Dosing range: 0,2 ml – 1,5 ml ENERGY - Electricity: 220/380 V, 50 Hz, 3 Ph+N+PE - Power consumption: 7 KVA (approx) DIMENSIONS - Footprint: 1500 ｘ 1135 ｘ 2000 mm (ca)

Sigmatek CDI 163 C-DIAS digital bus module input module. Devices were used at times under favorable conditions in a test station, hardly used, mostly for testing the software when new plants were built. Price per piece. Invoice with VAT. If there are any uncertainties with the software (e.g. in the case of monitoring the serial number by the software), we may be able to help. Feel free to call us.

; Gross weight [kg]: 18000; Engine: Baudouin 12M26 G1000/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Fuel tank available but capacity unknown., 40FT dimensions with twistlocks

Arburg 520C-2000-800 (193) Description with conveyor belt, bimetallic screw General Information SKU: 193 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Injection weight: 434 g Clamping force: 2,000 kN Screw diameter: 55 mm Spray pressure: 1650 bar Tie bar spacing: 520x520 mm Clamping plate size: 728x728 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 80000 h Weight: 7300 kg Dimensions: 6x2 m Funnel: No Core train: Yes Euromap: Yes

Omschrijving Lengte mm Aantal Bovenmes H=66,5mm, R=0,8 85gr 835 2 Bovenmes H=66,5mm, R=0,8 85gr 415 2 Bovenmes H=66,5mm, R=0,8 85gr 300 1 Bovenmes H=66,5mm, R=0,8 85gr 150 1 Bovenmes H=66,5mm, R=0,8 85gr 50 1 Bovenmes H=66,5mm, R=0,8 85gr 40 1 Bovenmes H=66,5mm, R=0,8 85gr 20 1 Bovenmes H=66,5mm, R=0,8 85gr 15 2 Bovenmes H=66,5mm, R=0,8 85gr 10 1 Bovenmes H=66,5mm, R=0,8 85gr LEFT 100 1 Bovenmes H=66,5mm, R=0,8 85gr RIGHT 100 1 Ondermatrijs V10, R=0,8, 85gr 835 2 Ondermatrijs V10, R=0,8, 85gr 415 2 Ondermatrijs V10, R=0,8, 85gr 300 1 Ondermatrijs V10, R=0,8, 85gr 150 1 Ondermatrijs V10, R=0,8, 85gr 50 1 Ondermatrijs V10, R=0,8, 85gr 40 1 Ondermatrijs V10, R=0,8, 85gr 20 1 Ondermatrijs V10, R=0,8, 85gr 15 2 Ondermatrijs V10, R=0,8, 85gr 10 1 Totaal 26 Price € 2250,-- New prijs € 3250,--

Vibro discharge tray Bosche BVA 1800/30, EX, No. 07-6711-02.22.2, 0.8 kw at 1500 rpm Discharge approx. ø 370 mm Installation height height approx. 850 mm Outlet valve pneumatic 24V Very good condition 4 piece(s) in stock and immediately available

Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall  ...

Technical data of the used Equiptop ESG-1228ASD Tangential Rectification: Magnetic plane: 712 x 330 mm Automatic working stroke: 760 mm (manual 830 mm) Grinding wheel diameter: 355 mm Grinding wheel thickness: 50 mm Engine: 7 1/2 hP Automatic diamond maker Increased working height CE certified; Year: 2000 Machine in excellent condition, CE certified.

Incubator New Manufacturer: Binder Type CB 160 – CO2 Incubator • Incubator Type: CO2 Incubator • Cabinet Type: Incubator • Maximum load: 11 - 50 kg • Internal volume: 150 litres • Maximum temperature: +60 °C • External dimensions: 680 mm (width) x 920 mm (height) x 715 mm (depth) • Internal dimensions: 500 mm (width) x 600 mm (height) x 500 mm (depth) • Temperature range: 7 °C above room temperature to 60 °C • Temperature deviation at 37 °C: ±0.3 K (spatial), ±0.1 K (temporal) • Recovery time after 30 seconds door opening at 37 °C: 4 minutes • Humidity range: 90-95% relative humidity • CO2 range: 0-20 vol.-% • Setting accuracy CO2: 0.1 vol.-% • Recovery time after 30 seconds of door opening at 5% CO2 by volume: 7 minutes • CO2 measurement: infrared (IR) • Nominal voltage: 230 V (50/60 Hz) or 115 V (60 Hz) • Nominal power: 1. ...

FEINTOOL GKP F 160 hydraulic press was built in Switzerland. The automatic fine blanking press combines several workpiece machining stages into one precise process and significantly saves time and effort. As a result of fine blanking, parts with a maximum thickness of 6 mm obtain a characteristic even surface and accurately defined edges that cannot be achieved with other machines. The FEINTOOL GKP-F hydraulic punching press features a robust, stable construction and a total force of 160 tonnes. Offered with the machine a sheet metal feeder with a maximum thickness of 6 mm and a width of 210 mm allows for completely automatic machining. The automatic punching press underwent extensive modernisation in 1999. The total weight of the GKP-F 160 press is 9000 kg. Technical data of the FEINTOOL GKP F 160 fine blanking press - maximum sheet metal thickness: 6 mm - maximum sheet metal wi ...

Technical data for the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet racking stand, used Material color: sendzimir galvanized Frame profile: 140 x 80 x 2.25 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) Height: 9,650 mm Depth: 1,100 mm General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

used cabinet press Manafacture: HSM Type: 155.1 VL Year of construction: 1998 Machine no.: 6118.114. 01217M Serial no.: 6118.01217 specifications: Pressing force: 18 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 08 / 2003 Machine No.: 6114.734. R Serial No.: 240141893 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 10 / 2004 Machine No.: 6114.734. S Serial No.: 250143017 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

Groove width: 3-100 mm Drawing length: 850 mm Stroke: 870 mm Table size: 780 x 430 mm Bore range: Diameter: 10-600 mm Return speed: 40 m/min Cutting speed: 0-16 m/min Total power requirement: 8 kW Machine weight approx. 1.55 t Space requirement approx. 1.8 x 2 x 2.25 m Foundation depth: can be omitted (1.07) m because the machine looks on a steel platform A number of accessories available

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Tecnograf TECNO 100 Book Stacker Printing Print Stacker Stacking Currently in stock

Used Subal PAC 130 dividing machine This is a precise, reliable and compact machine. Suitable for all types of dough, it guarantees smooth operation without punishing the dough at all. SMART-SOLID Specially for working with hard dough. Divide any type of dough with total reliability and precision, especially the hardest and most persistent. Technical data: Weight range: 100-1100g, Capacity: 1000 - 2400 pcs/h, Teflonised dough hopper: 100l, Single piston model, Dimensions max. L x W x H: 1600 x 1430 x 1720 mm, Power: 2 kW.

Key data: 80 , 200 , 400

Hood unit 100 kVA PRP Power: 100 kVA / 80 kW PRP Operating mode: 1500 rpm Voltage: 400/230 V Power factor: 0.8 Stage 3A Engine: Deutz | BF4M1013EC Generator: Leroy Somer | TAL044 D Aggregate control: Automatic control panel WITHOUT Switching and WITHOUT mains control with Comap IL-NT AMF8 1 x 4-pole circuit breaker Leak detector Battery disconnect switch Battery charger Cooling water heating Voltage regulator Tank: 145 L / 9 hrs. at 75% load

NEW Perkins Diesel 45/50 kVA, Modell 1103A-33TG1, silenced Subject to changes, errors and prior sale

Stainless steel container 1000 l Manufacturer: Willi Lermer Wiesbaden Volume 1000 l stackable 10 pcs available Very good condition, straight from production!

Brand Eurotec Dimensions LxWxH (mm) Outside: 600 x 400 x 120 / Inside: 570 x 370 x 100 Weight (Kg) ca 1,86 each Number of pieces in stock 5202 Made in Germany Comments Used but good condition, ex-freeze usage

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

Product number: 2676 Type: ATG700/1600 Serial number: 11204214 Year of construction: 2003 Belt width: 700 mm Length: 1450 mm, extendable to 1800 mm Power: 3 x 400V, 50Hz, 0.18kW Dimensions: 1450 x 1000 x 1200 mm Weight: 175 kg

BOWL CUTTER WITH EMPTIER MEISSNER, TYPE: COM-120 Technical description: Serial number: 718810 Material: Stainless steel Aisi-304 Power supply: 380-440V/50-60 Hz Bowl capacity: 120 lt Dimensions: 2100 x 1450 x 1570 mm