1 mw gas used for sale

; Gross weight [kg]: 1666; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185

; Gross weight [kg]: 7200; Engine: Cummins QSK19-G11; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1065

2 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machines type RBNV 1280/975, year 2001, capacity 150 Kg each machine, both machines can run individually or coupled (total 300 Kg per batch), autoclave diameter 1280 mm, delivered with total: 4 carriers with 22 swords each, each word has a useful loading height 850 mm, 2 carrier for bumps or loose stock inside diameter 1200 mm and core diameter 300 mm and useful height 800 mm, each machine add vessel capacity 800L with mixer

; Gross weight [kg]: 1330; Engine: Cummins 4BTA3.9-G11; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 120

Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.

This dryer from Colortronic is in machine storage at Plastima Used Machinery. The dryer is from 1981 and is in used condition. – Brand : Colortronic – Model: CTT 122 – Construction year: 1991 – Working Hours: Unknown

Inv. Num. : 6549 Type: KS 1800-10 Producer: Gehring Generated: Parameters: Honing diameter: 10 mm Machining length: 1800 mm

EUROMAC STX Flex 12 1250/30-2500 punching machine was built in 2019 in Italy by Euromac S.p.A.. The machine is designed for precision machining of both thick and thin sheet metal. All machining processes, i.e. punching, nibbling and marking, are performed with a force of up to 30 tonnes on a large brush table. Its design prevents scratches and scrapes on the sheet metal surface and significantly reduces noise levels. All tools are stored in capacious stations, three of which are 360° index stations. The high number of tool strokes per minute, reaching up to 2000/min, allows, in turn, maximum production efficiency during even the most intensive challenges. All this is complemented by an advanced industrial controller that allows even the most advanced programmes to be created in just a few steps. The EUROMAC STX Flex 12 Hybrid 1250/30-2500 CNC punching machine weighs 9500 kg. Technica ...

DEHUMIDIFIER MUNTERS ML 180 Desiccant dehumidifier with air-cooled condenser. Designed to efficiently dehumidify unheated enclosed spaces, with operating hours counter. Stainless steel sheet exterior, one-piece, fully corrosion-resistant plastic, with interchangeable front and rear panels for easier installation. Built in 2009. FEATURES - operating temperature: +0 / +25 °C - dehumidifies up to -20 °C - dehumidifies up to low dew point - IEC Protective class (unit): IP33 - IEC Protective class (electrical panel): IP54 - Sound power level to room Lw(A) dB (all inlets and outlets ducted): 75 dB(A) - Filter class: G3 Process Air - Rated airflow: 180 m3/h - Available static pressure: 200 Pa Reactivation Air - Rated airflow: 67 m3/h Condenser - Sensible heat: 1.4 kW - Fan power: 0.3 kW - Rated airflow: 650 m3/h - Available static pressure: 200 Pa  ...

We offer, in current condition For Tetra Pak TBA 8 Calibration gauge / Einmesslehre for TBA 8 aseptic filling machines for the volumes: 1000 ml slim, 1000 ml base, 1500 ml slim for TBA 8 aseptic filling machines for the volumes 1000 ml slim, 1000 ml base, 1500 ml slim Subject to prior sale

TECHNICAL SPECIFICATIONS Manufacturer: FLYGHT (XYLEM) Designation: Construction pump (submersible pump) Series: 2660.180 Type: B 226 MT Year of construction: approx. 2015 head: approx. 35 m flow rate: approx. 50 l/s Nominal data: 10.0 kW / 19.0 A Voltage: 400 V / 3 phases Start type: direct Pressure connection: F-Storz Motor protection plug: 32 A Water protection class: IP68 diving depth: 20 m Weight: 78 kg Height: 853 mm Diameter: 346 mm Screen opening: 10 mm

; Power [PS]: 699; Gross weight [kg]: 8425; Engine: Perkins 2806D-E18TAG1A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and Battery charger; Water Tank Volume [l]: 975

; Gross weight [kg]: 4670; Engine: Cummins QSNT-G3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 650

offer 22501 Technical data approx.: - working width 1020 mm - material thickness at 40 kg/mm² strength 1.5 mm -one. Backgauge adjustable up to 550 mm - front angle stop - Sheet metal hold-down - Table size 1100 x 650 mm - Working height 900 mm - Space requirement approx. W 1800 x H 1450 x D 850 mm - Weight approx. 400 kg -mobile

; Gross weight [kg]: 4830; Engine: Cummins 6ZTAA13-G4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 800

; Gross weight [kg]: 2350; Engine: 200; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 63A - 32A; Water Tank Volume [l]: 224

; Gross weight [kg]: 1520; Engine: Cummins 6BTA5.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185

; Gross weight [kg]: 1430; Engine: Cummins 6BT5.9-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185

2 units available / single purchase possible TECHNICAL SPECIFICATIONS Manufacturer: FLYGHT (XYLEM) Designation: Construction pump (submersible pump) Series: 2670.180 Type: B 226 MT Year of construction: approx. 2015 head: approx. 40 m flow rate: approx. 90 l/s Nominal data: 18.0 kW / 32.0 A Voltage: 400 V / 3 phases Start type: Star triangle Pressure connection: F-Storz Motor protection plug: free cable end Water protection class: IP68 diving depth: 20 m Weight: 141 kg Height: 955 mm Diameter: 395 mm Screen opening: 12 mm

Key data: 2000 KW, 10500 V

New industrial gas generator set based on the MTU Series 4000 engine platform. Designed for reliable continuous power generation and combined heat and power (CHP) applications. Key Specifications • Engine model: MTU 16V4000 L64 FNER • Fuel: Natural gas / biogas • Electrical output: approx. 2000 kW • Speed: 1500 rpm • Frequency: 50 Hz • Configuration: V-16 gas engine • Electrical efficiency: up to 44 % Applications • CHP power plants • Industrial power supply • Data centers • Distributed energy systems and microgrids Condition: New Availability: On request Location: Europe Contact for price, delivery time and detailed technical documentation PM : infobscgroup.eu

Bosch DMA 140D 301-D, 1070077623-216 Technical data: 670V-705V140A max. Version: V.0.019 Original price: 13554,-€ Item condition: Used, in perfect condition More products of this category can be found in our extensive EBAY assortment. More plug-in cards - new and used - can be found in our shop! International shipping costs on request! Plug-in cards and other products buy cheap - Here you buy goods from the professional for the professional - In our SHOP you will find more attractive offers

Key data: 1500 KW, 400 V

New industrial gas generator set based on the reliable MTU Series 4000 engine platform. Designed for continuous power generation in industrial facilities, CHP plants, and distributed energy projects. Key Specifications • Engine: MTU 12V4000 L64 FNER • Fuel: Natural Gas / Biogas • Electrical Output: 1500kW • Frequency: 50 Hz • Speed: 1500 rpm • Engine Configuration: V-12 gas engine • Electrical Efficiency: up to 43–44% Applications • Combined Heat and Power (CHP) plants • Industrial power generation • Data centers • Distributed energy systems and microgrids Condition: New Location: Europe Availability: On stock Please contact us for price, detailed technical documentation, and delivery conditions. PM : infobscgroup.eu

Offer MRN3 14D for sale.

Shaft grinding machine with belt grinding attachment Specifications: - Flexible shaft 1500 mm - 5 speeds - Belt grinding attachment - Drive 380 V - mobile underframe - Space requirement approx. W 600 x H 1400 x D 600 mm - Weight approx. 80 kg

Key data: 3200 mm, 2500 mm, 14000 mm

The lathe model 1682A is designed for roughing and finishing work on cast iron or steel parts weighing up to 170 tons. Production year 60’ and complete retrofited in 2011 The largest workpiece dimension above the support is 2500 mm. Parts can be machined using both high-speed steel and carbide-tipped cutters. The machine can be used for turning external surfaces, boring, facing and parting, and turning various cones, radii, and chamfers. The machine is equipped with a Balt-System NC-310/3 CNC system and separate drives for the Z, R, X, U, W, and Q coordinates, enabling the machining of complex surfaces (fill Based on the technical documentation provided, here is a translation and summary of the 1682A Heavy-Duty Lathespecifications, organized by category for better clarity: 1. General Machine Dimensions & Capacity This is a massive industrial lathe designed for exceptionally la ...

Gear motor Flender MBH 125CC-B 27.7/1 Bevel helical gear drive motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 were operated with frequency converters Matching Freqenzumrichter Walther Flender ZZ0103069.34003 Sinus Penta available A total of 15 traction motors and 12 drives ! available Very good condition, straight from production!

WAGNER FCU 1600 universal milling machine manufactured in Germany in 1998 is designed for precision machining of workpieces in X,Y,Z axes with feeds of 1200 mm (X axis), 700 mm (Y axis) and 500 mm (Z axis). The machine characterised by its high reliability and efficiency performs the milling of workpieces on a large work table with a length of 1600 mm and a width of 500 mm using a precision spindle rotating at a maximum speed of 2050 rpm. The milling machine is also equipped with measuring rulers and digital readouts. The total weight of the machine is 4000 kg. Technical data of the WAGNER FCU 1600 milling machine - feed rates in the X/Y/Z axis: 1200/700/500 mm - feed speed in the X axis: 10-1000 mm/min - feed speed in the Y axis: 10-1000 mm/min - feed speed in the Z axis: 5-500 mm/min - rapid traverse in the X/Y/Z axis : 3000/3000/1500 mm/min - working table dimensions (L x W): ...

Stock number: 3778 CUTTING LINE Manufacturer: MORGAN , Type: 1330 x 0.7 - 3.2 mm Specifications: Size scissors length 1330 mm Size sheet thickness 0.7 - 3.2 mm - Roller feed 2 pc dia. 100 rools Composed of: - Straightening machine 5 pc. dia 100 Reels - Drain reel 5 ton dia. 530-610 mm tone - Scissors Morgan 1500 x 3.2 mm Accessories: Coil trolley 5 ton Length: 6500 mm, Height: , Width: 33.00 mm, Weight:

Specifications: Capacity: 100 t Passage between stand: 1010 mm Working area, max.: 1010 x 300 mm Piston stroke: 400 mm Flow speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Specifications: Capacity: 160 t Passage between stand: 1100 mm Working area, max.: 1100 x 350 mm Piston stroke: 400 mm Flow speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

SCHAUBLIN 125 High precision lathe Diameter over the bed 270 mm Diameter over cross slide 120 mm Height of centers 125 mm Bed length 1000 mm Distance between centers 500 mm Spindle speed 45-3000 rpm Spindle nose Camlock D1-3 " Rapid traverse of the carriage 440 mm/min Longitudinal stroke 90 mm Cross travel 130 mm Vertical power feed 4-260 mm/min Metric threads 0.25-3.5 mm Spindle for collets B32 Tailstock cone MK 2 English pitches 112-6/1″ Special pitches 0.25-8 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension 1500 x 850 x 1300 mm Weight approx. 950 kg

pressure: 160 t distance between columns: 850 mm stroke: 150 mm table surface area: 850x650 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2,5 x 2,5 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the wide-span rack beam: Shelving system: Jung Heinrich Type: G The scope of delivery includes: 01x Wide-span shelving beam, used Material colour: RAL 1007 yellow Z-profile: 50 x 30 mm Agraffe: 3 HK (hook) clear width: 2,145 mm 02x locking pins, used Version: complete. galvanized To secure the longitudinal beams against unintentional lifting General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Lifting swaging machine Diosna S 120 Plus A used dough kneader Diosna S 120 for a maximum of 120kg dough, with 2 speeds, slow and fast is for sale and immediately available in our warehouse. Kneader Diosna S 120 - with 1 automatic timer - Machine is revised and repainted - with 2 gears - with stainless steel boiler - with flour dust cover - mobile on wheels with lock

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mRapid feed X / Y / Z36/36/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

The Bottero 108F Plat Poly is a robust and precise glass grinding machine, designed for grinding and polishing flat glass edges in an industrial production environment. This used unit from 2004 works correctly and is ideal for companies looking for a reliable machine for daily edge finishing. Technical specifications: Model: Bottero 108F Flat Poly Year of construction: 2004 Machine type: Straight-edge grinder (flat + poly) Number of grinding heads: 8 Machining: Flat edge, Polished edge, Deburring, Polishing Glass thickness: 3–40 mm (typical for this model) Transport system: Powered chain conveyor with glass guide Cooling system: Water-cooled grinding sections Speed ​​control: Variable adjustable Connections: 400V power supply, Water inlet/outlet Machine condition: Functioning well, immediately ready for use Why this Bottero 108F Flat Poly?  ...

Compact and reliable lifting solution for workshops and production environments The BPL Flexiheffer jib crane is an ideal solution for safely and efficiently moving loads up to 150 kg. The crane is designed for intensive daily use and offers a large working range thanks to the smooth jib arm. Technical Specifications Brand: BPL Type: Flexilifter 150‑R4‑L‑1500‑0 Year of construction: 2003 Height 2, 872 mm, width : 500 mm, length 1,878 mm Maximum lifting capacity: 150 kg, lifting stroke 1,500 mm Swing radius: 4,000 mm Construction: Steel column + swing arm Operation: Manual, smooth running Condition: Well-maintained, fully functional Connection: compressed air min. 6 bar, 700 NL/min Key Benefits Safe and ergonomic working with light to medium loads Compact design – ideal for workshops with limited space Smooth swivel movement for fast and accurate positi ...

Technical data of the parallel lathe Kramatorsk mod. 1A670 used: - Diameter on the bench: 2500 mm - Diameter above wagon: 2200 mm - Spindle diameter: 2500 mm - Distance between tips: 19000 mm - Pallet width with 4 guides: 2300 mm - Weight allowed between the tips: 100 tons - Speed: from 0 to 130 RPM - Motor power: 140 kW - Tailstock cast: Ø 400 mm - New transverse axis ball screws X: Ø 80 mm - CNC: FAGOR 8055 TC - Weight: 150 ton - Dimensions: 25 x 4 x 3.3 m

Machine name: Chamber filter press used Manufacturer: Netzsch Type: 1000 /110 Year of Make: 1996 Design: Side-spar press Filter pressure: 15 bar Press capacity: approx. 2509 liters Procedure: Closed Filter area: Approx. 163 m2 Plate format: 1000 x 1000 mm Number of plates: 100 Panel Material: Polypropylene Plate Conveyor: Automatic Filter Cloth Washer: Yes Cake thickness: 30 mm Closing pressure: 385 bar Dimensions: L 9,347 x W 2,245 x H 2,435 mm Curb weight: 11,800 kg Tech. Documentation: Yes Note: It will be available from January 2025 Accessories: A control cabinet, a control cabinet, a hydraulic system, a light barrier, a filter cloth washer and drip plates Condition: Used Price: On request

HADEF crane bridge 3.2 to, 19 m wide, 18m crane runway crane Overhead crane / gantry crane / overhead crane,5 m high, DONGES bridge 19 m wide, full working, German Crane, Year 2003 - Crane already dismantled, chassis can still be dismantled - free loading

Deck oven electric Miwe Condo CO 5.1208 used all-purpose oven stone slabs oven electric from Miwe Model Condo CO 5.1208 from year of construction 2013 tested and cleaned in stock immediately available for sale. The oven is with 5 shelves each 120x80cm with exhaust hood including steam condenser and proofing cabinet. - 5 tiers each 120x80cm - Each floor with Miwe FP control - each floor can be controlled separately - Top and bottom heat separately adjustable - each floor with separate steam function - with proofing cabinet - with steam condenser - with exhaust hood - Floor entrance height 17cm, interior height 16cm - Power: 49.1 kW - Built in 2013 External dimensions Width: 150cm Depth without hood: 132cm with hood +40cm Height without hood: 238cm with hood +20cm

COMPLETE TETRA PAK TPA/21-1000 SQUARE LINE, MANUF. IN 2001, CONSISTS: - TPA/21-1000 FILLER, V50, ONLY 14.000 RUNNING HOURS, INCLUDES A NITROGEN INJECTION STATION, - TCA/88 APPLICATOR - TCBP/70 WRAP AROUND PACKER, - CONVEYORS SYSTEM. CONVEYORS. EXCELLENT CONDITION WE PROVIDE DISMANTLING, INSTALLATION AND START UP SERVICE.

Vibro discharge tray DAXNER VAB 1200 0.525 kw power Spout ø 120 mm Counter flange

11 Meter Nagy PB-80 Pallet Rack Manufacturer: Nagy Type: PB-80 Shelf length: 11000 mm Stand height: approx. 10300 mm Stand depth: approx. 1100 mm Stand Type: PB-80 Profile: 80 x 60 mm Truss: screwed Stand surface: galvanized Clear field width: 3600 mm Truss: 3600 x 120 x 45 mm Truss surface: blue lacquered (RAL 5015) Number of fields: 3 Number of levels: 7 incl. floor parking space Max. pallet weight: 500 kg Permissible shelf load: 2000 kg Permissible field load: 12000 kg Pallet spaces: 84 Scope of Delivery 04 x Stand 10300 x 1100 mm galvanised 36 x Truss 3600 x 120 x 45 mm blue Technical Summary Stand: 10300 x 1100 mm, profile 80 x 60 mm, galvanized, truss screwed. Trusses: 3600 x 120 x 45 mm, blue (RAL 5010), 4 Euro pallets per level. Material & Construction: The galvanized surface offers long-lasting corrosion protection. In contrast to welded fram ...

For sale on "as is" basis Used Solar Gas Turbine Mars 100 SoLoNOx Natural Gas Location: Europe Year of manufacture: 2012 Output Power: 11,350 kWe Heat Rate: 10.935 kJ/kWe-hr (10.365 Btu/kWe-hr) Exhaust Flow: 153,245 kg/hr (337,950 lb/hr) Exhaust Temperature: 485 °C (905 °F) Frequency: 50 Hz Package hours: 27206 Gas turbine hours: 20547 Number of starts: 216 Housed on skid installed indoor with attenuating enclosure and fire detection and suppression system. Inlet System Barrier Filter and Silencer mounted on ancillary skid on the roof of the enclosure. Gear Reduction Box RENK MAAG GmbH. Type: GPF3-28, Output Speed/Freq. 50Hz - 1500rpm Generator Data: Electric Brushless AC Generator with Permanent Magnetic Alternator. Alternator data: 2.2kW. PF.9. 1 Phase. 240V/10A/120Hz. Gen Skid includes Lube oil tank, pumps, filters, start system with AC Direct Drive AC Motor, VFD, ...

GRONINGER PFS DFVN1000 FILLING MACHINE Filling and stoppering machine for presterilized disposable syringes. Can be used for testing sizes and small batches of products. For laboratories, test series and small batches. Machine built in 2009. CHARACTERISTICS - 2 rotary piston pumps with 2 filling needles. Gassing during filling and stoppering - Filling via rotary piston pump, peristaltic pump, time pressure, or in combination PRODUCTION - Output: 4.800 syringes/hr (max) - Syringe diameter: 8,15 mm (with stoppers) - Dosing range: 0,2 ml – 1,5 ml ENERGY - Electricity: 220/380 V, 50 Hz, 3 Ph+N+PE - Power consumption: 7 KVA (approx) DIMENSIONS - Footprint: 1500 ｘ 1135 ｘ 2000 mm (ca)

Sigmatek CDI 163 C-DIAS digital bus module input module. Devices were used at times under favorable conditions in a test station, hardly used, mostly for testing the software when new plants were built. Price per piece. Invoice with VAT. If there are any uncertainties with the software (e.g. in the case of monitoring the serial number by the software), we may be able to help. Feel free to call us.