1 mw gas used for sale

Process pump manufactured by STERLING SIHI.

; Gross weight [kg]: 4600; Engine: Hyundai DP158LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775

; Gross weight [kg]: 6185; Engine: Hyundai DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1090

; Gross weight [kg]: 2364; Engine: Hyundai P086TI; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224

1 of used motion controller, make Mayr / Pilz / Bielomatik, type Primo Compact P21.104.0, part number 0802645, version: 2.1.2.1 (859). Came from a Bielomatik BW Papersystems machine. OEM-tested OK. PS: we can potentially upload your machine program onto this controller, as well as provide further related troubleshooting and issue-resolving service.

UNUSED STERLING SIHI GMBH CBED 065200-187 CF 3AE 4B 2 CHEMICAL PROCESS CENTRIFUGAL PUMP

Model SC-120 Corn cutter provides maximum product recovery, high throughput, low maintenance and automatic corn removal from the cob at high speed. Each ear is placed on the feed through chain, tip end first. The stainless chain moves the ear of corn into the feed rolls. Two sets of feed rolls line the ear of corn up with the cutter head and move the earinto the cutter knives. The cutter knives are automatically openend for cutting by the feed roll gauging sytem. Kernels fall through the head and is discharged to a takeaway conveyor. A water spray is directed into the cuto-off corn area to minimize the starch build up.

1 used motion controller, manufacturer Mayr / Pilz / Bielomatik, type Primo Compact P21.104.0, part number 0802645, version: 2.1.2.1 (859). Came from a Bielomatik BW Papersystems machine. OEM tested OK. PS: We may be able to upload your machine program to this controller and provide other related troubleshooting and resolving services.

Vertical basket bottom discharge used centrifuge with scraper, mounted on inertia plate. Type RINA 300F-1000 manufactured by RIERA NADEU. It belongs to the 300 series for liquid-solid automatically separation processes.

Printing plate punch hatchet; good condition; Max. Plate width 205cm; Perforation 1200/780/425mm Autoplate; 1200 and 425mm can be parked. Plate punch hatchet; good condition; max.plate width 205cm; punch 1200/780/425mm autoplate; 1200 and 425mm can be suppressible.

SPECULAS BISCUIT LINE - INCLUDING PACKING MACHINE , DISPENSER , BISCUIT LINE, OPEN , MULTIHEAD PACKING MACHINE

DEFUM WFM-100 boring machine was built in 1984 in Poland by the Dąbrowska Fabryka Obrabiarek DEFUM. The machine is designed for precision machining of workpieces with complex geometry and high weight. All machining processes, i.e. drilling, milling, boring and thread cutting, are performed on a stable work table by means of a powerful spindle with a diameter of 100 mm. The WFM 100 horizontal boring machine weighs 11000 kg. Technical specifications of the DEFUM WFM-100 drilling and milling machine - feed in the X/Y/Z axis: 1200/1000/600 mm - work table dimensions (L x W): 1100 x 1100 mm - maximum workpiece weight: 3000 kg - maximum spindle rotational speed: 1600 rpm - spindle diameter: 100 mm - spindle drive power: 18.5 kW - dimensions (L x W x H): 4610 x 3620 x 3110 mm - weight of the DEFUM machine: 11000 kg

Process chiller / chiller air-cooled, Type: TAEevo Tech 602 P3-20 MTA S.p.A. TAEevo Tech 602P3-20 are compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, electronic expansion valve, buffer tank 500 ltr., built-in P3 circulation pump and winter package -20°C (condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 116 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 19.8 Available pump pressure (bar) 3.37 Ambient temperature °C 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 60.99 Max. current (A) 102.78 Starting Current Circuit (A) 218.51 Protection class: IP54 Dimensions: Length mm 3294, width mm 1255, height mm 2119, Weight kg 1773 Connection Rp 2"  ...

Gluing machine Sumbel Coronel 120; good condition; cleaned and tested; Working width 120mm; 2-roller system; Glue basin height-adjustable; suitable for cold glue. Gluing machine Sumbel Coronel 120; good condition; cleaned and checked; working width 120mm; two roller system; glue reservoir adjustable in hight; used for cold glue.

Kuper Veneer Zigzag Veneer Composition Machine, Type FW/ 1200-E Year of manufacture 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely adjustable zigzag width of the glue thread cutting device veneer thickness : 3.0 mm min. veneer thickness : 0.3 mm Glued thread with hot air heating Compressed air generation Discus for transporting the veneer over the veneer table Control via foot pedal Feed Speed: 35-60m/min Voltage: 400 V, 50 Hz Total power 1.35 kW Working height 915mm Bzunfcilke Weight approx. : 440 kg Dimensions : 2,12m x 0,73m x 1,55m

Lifting tipper Kemper HK 150 -for boiler spiral kneader Kemper SP 150 A and AL -Load capacity 1000kg -Height 204 cm -Tipping height 190cm -can be driven on castors

DAMAS GOLFA 1327IE, FINE CLEANING MACHINE Pre-climb classifier module E/R, main climb classifier module E/R, screening unit module E/R, air regulation, spare screens etc.

Process chiller / chiller air-cooled, Type: TAEevo Tech 602 P3-20 MTA S.p.A. TAEevo Tech 602P3-20 are compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, electronic expansion valve, buffer tank 500 ltr., built-in P3 circulation pump and winter package -20°C (condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 116 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 19.8 Available pump pressure (bar) 3.37 Ambient temperature °C 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 60.99 Max. current (A) 102.78 Starting Current Circuit (A) 218.51 Protection class: IP54 Dimensions: Length mm 3294, width mm 1255, height mm 2119, Weight kg 1773 Connection Rp 2" ...

Centrifugal pump with magnetic coupling. General characteristics: Manufactured by STERLING SIHI Model CBED 040160-165 CF2ET4B2N Type ATEX Year built 2006 Motor characteristics: Power 5.5 kW - 7.37 cv Frequency 50 Hz Rotational speed 2910 rpm

Inv. Num. : 3861 Type: L-K 120-3100 TSI Producer: SAFAN Created: 2002 Parameters: Control system: SAFAN Pressing force: 1200 KN Bending length : 3100 mm stroke: 180 mm Dimensions: 4200 x 1650 x 2775 mm Machine weight: 8700 kg

3 Chamber Press – Waste Press Strautmann MK 1100 used Features • Manufacturer: Strautmann • Type: MK 1100/3 • Condition: Used goods, see photos • Colour: Green • Dimensions: 3600 x 1000 x 2700 mm • Net weight: 2000 kg • Connection: 4 kW, 400 V, 50 Hz • Press force: 200 kN • Year of manufacture: 2000 Price € 4.900,- net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Viewing and pick-up: possible at any time by appointment Over 5000 linear metres of pallet racks from numerous manufacturers in stock at all times (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Specifications: - TIG – DC + electrode welding - Welding current infinitely adjustable for TIG welding of 5 A-10.0 V to 150 A - 22 V 35% ED 100 A 100% ED - Connection 220 V / 50 Hz 15 A - with: - 2 stroke 4 stroke - function - HF ignition - Welding current descent setting - Gas pre-flow regulation - Gas afterflow regulation - Hose package 4.5 lfm, lightweight design - Ground cable - Pressure reducer - Space requirement approx. W 200 x H 300 x D 500 mm - Weight approx. 10 kg - Transport trolley with gas cylinder slot W 550 x H 900 x D 560 mm - Weight transort van approx. 10 kg

Process chiller / chiller air-cooled, Type: Galaxy GLT 135 SHE MTA S.p.A., The Galaxy GLT 135 SHE are compact chillers designed for outdoor installation (from -20°C to +43°C) are suitable with plate evaporator, scroll compressors, control and control cabinet, shut-off valves for compressors, equipment for low ambient temperatures down to -20°C (EC fans), P2 pump, 510 litre buffer tank, electr. Antifreeze heating, condenser filter mats incl. Vitaulic couplings. Cooling capacity (kW): 354 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.7 Available pump pressure bar: 2.51 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 6 Power levels (%): 0-17-33-50-67-83-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 167.7 Ma ...

Spiral dough kneading machine Kemper SP 125 L used bakery machines, kneading machine spiral kneader with solid stainless steel boiler from Kemper robust and stable, spiral kneader Kemper SP 125 L for the production of high-quality Teigen.Es can roll dough, bread dough, pastry dough and similar doughs.Kemper spiral kneaders work on 3 zones kneading principle spiral guide rod so the doughs become woolly, processing-friendly with maximum oxygen input in the dough. Kemper Spiral Kneader - Stainless steel boiler - Stainless steel spiral - 2 x timers automatic - 2 x speeds slow and fast - with flour dust cover - for 125 kg of flour or 200 kg of dough Machine can be inspected and tested in our warehouse. Shipping and trade-in as well as further information and pictures on request.

Process chiller / chiller air-cooled, Type: Galaxy GLT 135 SHE MTA S.p.A., The Galaxy GLT 135 SHE are compact chillers designed for outdoor installation (from -20°C to +43°C) are suitable with plate evaporator, scroll compressors, control and control cabinet, shut-off valves for compressors, equipment for low ambient temperatures down to -20°C (EC fans), P2 pump, 510 litre buffer tank, electr. Antifreeze heating, condenser filter mats incl. Vitaulic couplings. Cooling capacity (kW): 354 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.7 Available pump pressure bar: 2.51 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 6 Power levels (%): 0-17-33-50-67-83-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 167.7 Ma ...

- 400 Volt, three-phase motor with brake, 2 kW - 420 mm disc - cutting height 170 mm - cutting length 410 mm - hydraulic feed brake - cooling system - compressed air preparation station - pneumatic pressure on both sides

-Vat for lifting kneader Kemper F 150 ASL -Stainless steel boiler -Car overhauled and repainted -2 new roles -Boiler diameter outside: 103,5cm -Boiler height inside: 50cm

Reference ID: PP-53194 Category: Flatbed Die Cutter Manufacturer: Bobst Model: SP 104-ER Year Built: 1996 Color:- Impression:- Working Hours: 64,000 Speed: 8,000 sheets/hour Max. Size: 1039 x 740 mm Min. Size: 399 x 350 mm Condition: Good Location: Europe Availability: - Machine Description Feeder & Infeed Non-stop (manual/automatic): Manual Non-stop infeed bars (mm): 18 Non-stop bars coating (Chrome/Teflon/Standard): Standard Non-stop bars equipped with air pressure (Y/N): No Non-stop bars with lateral shifting (Y/N): Yes Lateral register available (Y/N): No Register type (POWER/ACCU/LATERAL/MECHANICAL): n/a Register mark width (1 mm): n/a Reading from (Top/Bottom/Both): n/a Front margin – standard/light sensor: Yes Mechanical front margin (25, 60, n/a): 25 Upper transport belts on infeed (corrugated): No Detection sheet direct ...

Flake Ice Machine / Rotary Evaporator with Silo Manufacturer: MAJA Type: RVH 1500 CO2 The flake ice generators of the MAJA RVH series can be integrated into refrigeration concepts that are designed for environmental compatibility and sustainability. Specifications: Year of Make: 2019 Ice capacity approx. 1500 kg / 24h Dimensions of the entire facility: width 175 cm / depth 130 cm / height 230 cm Weight approx. 450 kg Electrical connection 3AC/50Hz/400V/PE0.28 kW Control: Maja Touch Panel (optional) Refrigerant required: R744 Function checked / machine ready for immediate use! Condition and accessories see original pictures! If you have any questions, email or call.

SPECIFICATIONS: Number of filter bags: 150 - Ø mm 123 04 Ker crushing plates Height mm: 3000 Fan Power Hp: 30 Star valve Ø mm 320 Tank with 15 solenoid valves Triboelectric probe Spark detection system Output screw conveyor Switch box with inverter Complete with ladders, fencing and piping

Meat grinder Laska WW 130-1G, 130 mm angle grinder, 1-touring wolf in frozen meat version, stainless steel version, load for 200 liters standard car, ergonomic operation, enlarged funnel with 295 liters

Seydelmann WD 114, 114mm tamping grinder, outer surface, funnel, screw housing, and screw stainless steel, ejection device for screw and cutting set manually operated, cutting set Unger D 114, perforated disc diameter 114 mm, sorting device optionally available

Meat grinder Laska WW 130-2, 130 mm angle grinder, 2-touring wolf, stainless steel version, load for 200 liters standard car, ergonomic operation, enlarged funnel with 295 liters

Commercial dishwasher HOBART Model: UXT-A-SEF Type: UXT-10A/V, R Specifications: External dimensions WxDxH: 140 x 95 x 225 (242) cm Basket size WxD: 124 x 70 cm Insertion height: 86 cm Electrical connection: 400V 3NPE 50Hz 21.6kW Fuel tank capacity: 130 liters Water consumption: 7.5 litres/basket Program duration: 120/240/360 sec. and special programs Weight: 295kg Year of Make: 2019 Original price: EUR 50.722,- VISIOTRONIC control: One-button operation with remaining run indicator in combination with text and graphic display. SENSO-ACTIVE use of resources: The control system permanently monitors the ingress of dirt into the tank and adjusts the rinse volume individually and in real time to the degree of soiling. POWER wash: Guarantees the removal of the most stubborn dirt through increased washing pressure. CLIP-IN washing and rinsing arms: Both washing and ...

Cutter K+G Wetter CutMix 120 STL with load for 120 liter standard car and ejector, 120 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection lid, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely variable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, rated power 42.5 kW, K+G weather CM 120 STL

8.10 Meters AR Racking Pallet Rack AR Racking pallet rack with a total length of 8100 mm, consisting of a base field and two attachment bays (2700 mm each). Each field has three levels (including floor space) with four trusses (2700 mm). Thrust protection and rear wall grilles ensure that your stored goods are securely held on traffic routes and in work areas 3 Euro pallets can be stored next to each other and 3 pallets (incl. floor space) on top of each other per field One field offers space for 9 Euro pallets Manufacturer: AR Racking Type: ARPA-S Total length: approx. 8100 mm Shelf height: 3500 mm Shelf depth: 1100 mm Clear field width: 2700 mm Pitch: 50 mm Number of storage levels: 3 (incl. floor storage space) Number of fields: 3 Shelf load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 27 Year of manufacture: 2023 Stand The frames consist of two Om ...

PVS 125 H i Mirco-cut Colloidmill -Ultra-fine shredder 1 Models 11 KW 15 KW and 22 KW

Daedong D 3-110, 3-Cyl., 1127 cm³ displacement, 18 kw/24 HP/ 3000 1/min. Incl. starter, alternator, generator flange SAE 5. as well as Daedong D 4-150, 4-cyl., 1502 cm³ displacement, 24 kw/32 hp/ 3000 1/min. Incl. starter, alternator, generator flange SAE 5.

From linear to combination scales Application: Dosing free-flowing general cargo in accurate quantities. Characteristics of the scale • High accuracy • All parts in contact with the product are made of smooth 304 stainless steel • Simple operation, easy to clean and can be dismantled without tools • Control Panel: 7" Touch Screen • Low maintenance • Synchronization with all packaging machines possible Specifications • Number of weighing heads: 10 • Weighing container: 2,5l • Weighing range: 10 - 1000g • Accuracy: ± 1.0g - 1.5g • Speed: up to 60 sachets/min (depending on product) • Control panel: 7" touch screen display • Opening of the container flaps by means of stepper motors • Power: 230V / 1.3KW / 50(60)Hz / 10A • Dimensions (LxWxH): 1700mm x 1100mm x 1265mm • Machine weight: 380kg

FlowCook completely stainless steel suitable for thermo-oil heating Belt length ± 13,000 mm Track width ± 600 mm Executing belt Belt washing system electric lifting device for the cap Total dimensions (L x W x H) : ± 15,000 x 2,200 x 3,000 mm

-Thermal oil magnetic pump with motor -Pump manufacturer Sterling Fluid Systems Model: ZTTZ 40160 / AP 1EO 1B 2 Engine see pictures

Impressions=0 m, Condition= Good , Availability= 2025-11-03, Size Max 76 x 106 Size Min 450 x 450 mm cardboard thickness 250-2000 gr/m2 Max corrugated thickness 5 mm Speed 6000 sh/h Pressure 300 tonn

DH Robotics RGI-100-22 Rotating Electric Gripper without Brake With the Rotary Electric Gripper-RGI-100-22-O you have precision and performance under control! Discover the exemplary performance of the Rotary Electric Gripper RGI-100-22, where precision meets performance. With a gripping force of 30 to 100 N, this gripper ensures a firm yet adaptable hold of your materials. Its IP40 device guarantees reliable operation in a wide range of environments. With a maximum payload of 1.5 kg, it is designed for versatility and strength. The 22mm stroke offers a wide range of motion, making it perfect for various applications. Despite its robust features, the gripper maintains a handy weight of only 1.4 kg, which ensures easy installation and operation. Improve your automation process with the RGI-100-22 and experience the future of gripping technology today. Item Attribute Weight (gri ...

There are 2 engines of it. One was the spare engine! Engine low runtime. 1 hour a day every 4 days for testing purposes. Motor overhaul 2009. Electrodes little worn. See photo nameplate for 6000V, 50 Hz, power 1000kW, 1480 1/min. V=595 / A=1020

Machine Details Warehouse number 1105-03546 Machine Type Machining Center - Vertical HARTFORD brand Type VMC 1230 Year of construction 2000 Control type CNC Control FANUC 18 M Storage location HAGUENAU Country of origin Taiwan Delivery time immediately Freight base EX WORK Technical details x-travel 1230 mm y-travel 610 mm z-travel 610 mm Table clamping surface 1400 X 610 mm Speed range - milling 60 - 8000 rpm Control FANUC 18 M Drive power - Milling spindle 11 kW Tool holder BT 40 Number of tool magazine slots 30 stations Feed range 1 - 10000 mm/min Rapid traverses: 20 m/min Total power requirement 25 kW Machine weight approx. 9800 kg Space requirement approx. 3300x2700x2600 mm Accessories Full protection - fairing Complete machine documentation Central lubrication RS 232 - Data Interface Information very nice only working in aluminium CONTROL FAN ...

Qty. 1 Second-hand bifilar pipe winding line Mfc.: GRAEWE GmbH Type: AEW 1000 Built: 1998 Tube dia.: 10, 12, 14 & 16 mm Coil core ID: 940 mm OD: 1250 mm Bifilar coiler Type: EW 1000 PLC Simatic S5 Consist of: De-coiler Coiler Ring coiler Bending unit Support table Cutting shear Binding device Electrical Control

KBA 104 8 colour, autoplate, all wash, bj 97. 195 mil print number

Anilox - cylinders and plates washer

Bartscher refrigerated table 0 °C to 10 °C 1 unit – double benefit: convection cooling ensures a constant and uniform cooling temperature inside the refrigerated table with 1 door and 4 drawers. With its high-quality and robust stainless steel surface, the appliance can be perfectly integrated into any kitchen and can also be used as a work surface. • Number of drawers: 4 • Door hinge: Left • Door Type: Hinged Door(s) • Number of doors: 1 • Number of cabinets: 1 • Cabinets refrigerated: Yes • Drawers refrigerated: Yes • Standard format drawers: 1/1 GN • Connected load: 0.452 kW | 230 V | 50 Hz • Feet height adjustable: Yes • Temperature range: 0 °C to 10 °C • Height adjustable: 850 mm to 900 mm • Backsplash: 50 mm • Cooling: Convection • Refrigerant: R134a • Digital Display: Yes • Depth GN container max.: 150 mm • On/Off S ...