1 mw gas used for sale

Engine power of the bowl, kW: 1,5 Motor power of knives, kW: 37 Bowl volume, l: 125 Bowl rotation speed, rpm: 10/ 20 Two-axis speed in cutting mode, rpm: 2000/4000 Two-axis speed in forward and reverse mixing mode, rpm: 80/160 rpm Dimensions (WxDxH) max, mm: 2140 x 1375 x 1590 Weight, kg: 2200

: 0400 mm : 1250 mm : : 200 mm : 80 mm : 315 mm : 2700 U/min : D1-8 DIN 55029 : 73 mm : 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 670; Engine: Battery System: LiFePO4; Accessories: Battery, Control Panel, AC output sockets: 2x 32A (1 for parallel), AC Input sockets: 1x 15kW, DC input: 1x 30kW

; Gross weight [kg]: 114; Engine: GX 390; Accessories: Tanker, Battery, Sockets for welding cables, Socket 400 V 16 ASocket 230 V 16 A, Overload protection, Oil level sensor, Silencer with exhaust adapter; Water Tank Volume [l]: 45

; Gross weight [kg]: 125; Engine: GX 390; Accessories: Tanker, Battery, Sockets for welding cables, Socket 400 V 16 ASocket 230 V 16 A, Overload protection, Oil level sensor, Silencer with exhaust adapter; Water Tank Volume [l]: 45

; Gross weight [kg]: 100; Accessories: SAE4#7, 5

Chiller, chiller make AxAir, 180 Kw, R410A, with 4 compressor

; Gross weight [kg]: 2100

; Gross weight [kg]: 594

; Gross weight [kg]: 385

Switchable 50Hz and 60Hz, Standby power: 1125kVA at 60Hz, 1000kVA at 50Hz; Gross weight [kg]: 13910; Engine: Cummins KTA38-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1200

; Gross weight [kg]: 570; Engine: Yanmar 4TNV98C; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including sockets:, - CEE 63A - 400V - 5P, - CEE 32A - 400V - 5P, - CEE 16A - 230V - 2P; Water Tank Volume [l]: 70

Technical data Specifications are subject to change without notice. Dimensions are subject to change. Dispensing width (max.) 130 mm Dispensing height (max.) 75 mm Dispensing length (max.) ~60-280 mm Motor power 0,25 kW Voltage (3-phase) 400/50 V/Hz External dimensions (W x D x H) 616 x 1407 x 1185-1385 m

Key data: 3500 kN

Awaiting refurbishment is this Arburg 221KS 350/100 U injection moulding machine. Fitted with a Selogica controller. This is a universal machine from Arburg which allows for the clamp unit to be pivoted vertically, ideally suited to insert moulding. These small machines are sought after for the many moulding options they can suit, from a very compact machine. Occasional vertical moulding requirement? These machines are ideal. In standard horizontal configuration, they operate the same as any traditional machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fa ...

External/Internal Cylindrical Grinding GENDRON RU 28.100 Between points: 1000 mm Maxi grinding diameter: Ø 290 mm Tool holder rotation: from 70 to 370 RPM 4-jaws Ø 200 mm chuck Grinding wheel: Ø 300 mm Auto pass plug Swivel table External hydraulic group External lulbricant tank Voltage: 380 V Dimensions (L x W x H): 3000 x 1900 x 2000 mm Weight: approx 3 T

; Gross weight [kg]: 4667; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 800

This 4-axis Elumatec SBZ 122/73 was manufactured in 2021. It features a powerful 17.5 kW capacity and a maximum spindle speed of 20,000 1/min, making it suitable for high-performance machining. The machine includes a collision-optimized clamping system and a specialized tooling set for aluminum. If you are looking to get high-quality machining capabilities, consider the Elumatec SBZ 122/73 machine we have for sale. Contact us for further details.

This 3-axis MIND MACH T. VMC 1000/A was manufactured in 2007. It features an X-axis travel of 1020 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a table size of 1200 x 600 mm and a maximum table load of 850 kg. If you are looking to get high-quality machining capabilities, consider the MIND MACH T. VMC 1000/A vertical machining center we have for sale. Contact us for further details.

thickness of jaw: 160 mm : 53 mm clamping width: 305 mm clamping capacity: 5,7 t weight: 60 kg dimensions of the machine ca.: 700 x 160 x 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Labeller Manufacturer BBK Type PAX 170 4R Year of construction 2010 Self-adhesive label labeller Roller diameter max. 285 mm, core diameter 76 mm, width 104 mm Label length min. 15 mm – max. 150 mm, width 100 mm Ribbon Outer diameter 101.6 mm, core diameter 25.4 mm, length 900 m Machine: length 700 mm x width 700 mm x height 1720 mm weight 130 kg

thickness of jaw: 160 mm : 54 mm clamping width: 315 mm clamping capacity: 2,0 t weight: 60 kg dimensions of the machine ca.: 550 x 250 x 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Labeling Machine Manufacturer: SES Type SES-107 TTF Year of manufacture 2003 2-sided carton labeller including thermal transfer printer (1x top, 1x side) 2x SES 107TTF installed on the left side max. label width 116 mm Min. label width Label width 25 mm Min. label height Label height 15 mm Print width 106.6 mm, max. print height 1,500 mm Printing speed 300 mm/sec, labeling speed 0-18 m/min Conveyor belt length 1500 mm x 280 mm width Housing, control Siemens PLC S 7

Used-refurbished equipment 6 months warranty refurbishment time approx. 3 weeks 152 needles 600mm tape width max. capacity 6000kg/h Technical data: Power: 8 kW Dimensions (HxWxD): 1880x965x2100 mm Weight: approx. 580 kg Electrical connection: 400V, 50Hz, 3phase

spindle diameter: 140 mm x-travel: 12500 mm y-travel: 3000 mm z-travel: 800 mm tool taper: ISO 50 dimension of the ram: - mm turning speed range - spindle: 1000 U/min main drive: - kW table surface area: 3000 x 2100 mm V-axis: 1500 mm table load: 25 t control: TNC 420 total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m equipped with - CNC control Heidenhain TNC 430 - NC rotary table 3000 x 2100mm, 25t - Telescopic steel sheet covers - Panel field (several sizes) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL SPECIFICATIONS Manufacturer: IBAG Designation: Double Toggle Jaw Crusher Type: KS 1250/1000/04 Year of Make: 1997 Inlet opening (width x height): 1,250 x 1,000 mm Net weight: approx. 60 t. Drive power: 160 kW Grease lubrication pump: yes SPECIFIC COMMENT - Incl. inlet box - Incl. complete set of crushing jaws - Incl. printing plates and spare parts - Eccentric swingarm torn, spare swingarm available - Ideal for crushing hard rock

Size: 1850 mm Equipments: Working width min/max 215 mm / 1850 mm Working width after gluing min / max 140 mm / 1000 mm Insertion min / max 150 mm / 1200 mm 3 point / 4 point / special binding F/E/EE/EB/BE corrugated / solid cardboard Straight line glue folding bottom Motorized format setting

Inclined bucket mixer Manufacturer FMW Type 115200/21H475.1 Capacity 50 litres Material: Stainless steel heated, double jacket

Size: 1640 x 1640 mm Equipments: Feeder: Edge Feeder (MIRUS) Sheet feeder by carrier chains Press Station Speed: 3,000 cycles/h Control device: Siemens SPS-Control / Micro Control System Gluing Station Laminating Station Technical Details Size max: 1640 x 1640 mm Size min: 500 x 500 mm Sheet weight: Cardboard 100 - 800 g/qm Infeed height: 1,400 / 1,800 mm Carrier Sheets: one-sided corrugated board, E/B- and F-Flute, two-sided corrugated board up to 7 mm thickness cardboard from 0.5 mm thickness

Composite system houses with 4 pcs compressor Bitzer screw Type: HSN 7471-75-40P Cooling capacity 1351KW at minus 41 °Celsius evaporation temperature. Including condenser, oil cooler, control box, etc. with Economiser. Refrigerant R404A, R507A, R449, etc. Can be used for blast freezers or freezers. Price on request 0043-6641838175 or infofrigocom.at

WMW Union BFT 80/2 X: 1000 - Y: 1000 - Z: 1600mm Spindle Dia: 80 mm Spindle bore: ISO 50 Table dimensions : 1100 x 1000 mm Table longitudinal travel (X-axis): 1000 mm Cross travel Table/colom (Y-axis): 1000 mm Height travel head (Z-axis): 1600 mm Max travel spindle: 700 mm Power on spindle: 1250 rpm Power principal motor: 8,5 kW Weight: 11 ton

Inv. Num. : 8364 Type: MBB-1660 Producer: Sunnen Created: 2022 Parameters: Length range: max. 400 mm Diameter range: 1.5-165 mm Machine height: 1600 mm Machine length: 1524 mm Machine width: 762 mm

Specifications Brand: Butter Type: 110FC Kind: Flat Poly Grinder Serial Number: GG110C 7255 Year of construction: 2001 Weight: 3.5 tons Assets: 26 kVA Transport dimensions L x W x H 6.0 x 1.2 x 3 meters Number of spindles: 10 State machine: Working disassembled. Photos/film available: Photos

Demag 5 ton x 15 100 mm Kind of: overhead travelling crane Capacity: 5 ton Span: 15 100 mm Radiocontrol: no radio control Numbre of riggers : double rigger

Brand Metso Type Pump Model USHM 75 |180 w9Hc Chassis number 3013720100101,00 Year of construction 2011 Weight 0.5 ton Assets 11Kw Length mm 3200 Width mm 700 Height mm: 1100 Transport dimensions L x W x H 3.2 x .07 x 1.1 State machine Good Type of control Automatic Electrical connection 32A 5p Photos/film available: Yes

Demag 6,3 ton x 15 100 mm Kind of: overhead travelling crane Capacity: 6,3 ton Span: 15 100 mm Radiocontrol: no radio control Numbre of riggers : double rigger

Key data: 1100 mm

DMC Polisand 110 RP wide belt sanding machine year 1998 Varnish Wide belt sanding machine total installed power approx, 23 KW Sanding width 1100 mm Workpiece thickness up to approx, 170 mm Motorized height positioning with digital reader Vacuum transport belt, F,LLI FERRARI vacuum unit with motor power 4 KW Feed motor power 1,50 KW Aggregate 1: grooved rubber sanding roller, with blowers Aggregate 2: sanding pad, with blowers Both groups are driven by an 15 KW motor 380 V / 50 Hz weight 2300 Kg Dimensions: 2,45m x 1,85m x 2,0m