1 mw gas used for sale

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

Manufacturer: IBK, Type: 33-110, Year: 2006, Durchflussbereich l/min: 9, Kolbenpumpen gesamt: yes, Transmission ratio: 33-1, Compressed air bar max: 8, Pneumatic pump: yes, FREE TEXT: Materialüberdruck 264 bar/Anlagen werden geprüft und gereinigt, Year :2006

Manufacturer: IBK, Type: 33-110, Year: 2006, Durchflussbereich l/min: 9, Kolbenpumpen gesamt: yes, Transmission ratio: 33-1, Compressed air bar max: 8, Pneumatic pump: yes, FREE TEXT: Materialüberdruck 264 bar, Year :2006

Manufacturer: IBK, Type: 33-110, Year: 2006, Durchflussbereich l/min: 9, Kolbenpumpen gesamt: yes, Transmission ratio: 33-1, Compressed air bar max: 8, Pneumatic pump: yes, FREE TEXT: Materialüberdruck 264 bar, Year :2006

Manufacturer: Bürkle, Type: SLC 1300, Year: 1999, Control: Sütron, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 1300, Operating side: rechts, Working height: 930, regelbarer Direktantrieb für Auftragswalze: yes, Auftragswalzengeschwindigkeit m/min.: 6-30, Gummierte Auftragswalze mm: 238, Metering roller drive m/min: 1-6, Attachment bracket roller: yes, rbakel: yes, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Pump system: Membrane, Year :1999

Manufacturer: Costa Breitbandschleifmaschine, Type: CCT/1350, Year: 1995, Monting of the machine: Stahlwalze/Gummiwalze/Schuh, Sanding width mm: 1350, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Steel roller: yes, Band 1 Leistung kW : ca.30, Band 2 Leistung kW : ca.30, Band 3 Leistung kW : 17, Continous adjustable feeding speed m/min: 10-25, Transportbandantrieb kW: ca.3, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, Weight in kg: ca.8000, Year :1995

Manufacturer: Airlesspumpe B & M, Type: BMP 1132, Year: 2004, Kolbenpumpen gesamt: 1, Transmission ratio: 32:1, Volumenstrom Doppelhub ccm 2: 72, Volumenstrom Doppelhub ccm 2: 72, Compressed air bar max: 256, Pneumatic pump: yes, Wandhalterung: yes, Year :2004

Manufacturer: Graco Membranenpumpe, Type: A-1211, Transmission ratio: 125-8,6,

Manufacturer: Graco Membranenpumpe, Type: Husky 1920, Durchflussbereich l/min: 8,3(120)<CRLF>132(35), FREE TEXT: PN 220-438,

Manufacturer: Brandt , Type: F 10/100, Year: ca.2000, Control: hand, Edgeband thickness max mm: 3, Edgeband height max mm: 10-55, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW output motor: 0,5, Inner radius in mm: 35, Suitable for shaped and straight parts: yes, Manual feed: yes, Mitre stations: yes, Year :ca.2000

Manufacturer: Numgüttinger, Type: Num 1062 W, Model: aus Weeke bP 155, Serial number: 128327, Year: 1997, war verbaut in Maschine: aus Weeke bP 155, Year :1997

Manufacturer: Costa, Type: T 1350, Year: 1998, Monting of the machine: schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 1, Sanding belt dimensions: 3250 X 1350, Längsschleifaggregate: ca.17, Bürstenaggregate: yes, Band 2 Kombiaggregat Walze/Schuh: 10-20, Belt 4 pressure segment belt: yes, Belt 4 synchronous and reverse run: 32, Elektronische Tastung mm: yes, Table hight adjustment by engine: ca.1,5, Transportbandantrieb kW: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Year :1998

Manufacturer: Giardina, Type: GST 1400, Year: 2005, Work piece width min-max mm: 50-1350, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 12, Lampen gerade eingebaut: yes, Adjustable: no, Power per lamp watt UV: 80, od distance mm: 100, Conveyor lenght mm: 2000, Outer belt width mm: 2450, Feeding speed m/min: 8-20, Conveyor: Stange, Drive power kW: 1,2, Year :2005

Manufacturer: Giardina 3 D UV-Trockner, Type: GST 1400/3 Albatros, Year: 2005, Work piece width min-max mm: 100-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Number of lamps: 3, kW power 1 lamp: 12, Lampen gerade eingebaut: yes, Adjustable: yes, Position of lamps: gerade, Power per lamp watt UV: 80, od distance mm: 120, Conveyor lenght mm: 3500, Feeding speed m/min: 2-7, Drive power kW: 1,5, Electrical power consumption kW: 44,1, Year :2005

Manufacturer: Costa Lackschleifmaschine, Type: C 1350, Year: 1999, Control: Costa, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Rubber roller: yes, Shore roller 1: 40, Band 1 Leistung kW : 36, Band 1 Schleifbandgeschwindigkeit m/s : ca.5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Noise enclosure: yes, Workpiece emitting device nozzles: yes, Year :1999

Manufacturer: Weber, Type: OFZ 1 - 1350, Year: 1993, Monting of the machine: Walze, Sanding width mm: 1.350, Sanding hight mm: 3 - 120, Number of sanding belts: 1, Sanding belt dimensions: 2.620 x 1.350, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : no, Table hight adjustment by engine: yes, Rubber roller: 1, Band 1 Leistung kW : ca 18, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: ca 5 - 15, Transportbandantrieb kW: ca 3, Intermediate sanding of lacquer: no, Year :1993

Manufacturer: Barberan, Type: HOK-C-1-1400, Year: 2012, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1330, Number of lamps: 1, Lampen Schräg eingebaut: no, Lampen gerade eingebaut: yes, Adjustable: yes, Power per lamp watt UV: 80, Feedin speed m/min: 10-20, Year :2012

Manufacturer: Wiwa Leimpumpe, Type: 10018, Year: 90/630310, Volume flow m³/min: 10, Compressed air min/max bar: 8, Year :90/630310

Manufacturer: SCM, Type: Record 130, Year: 2001, Control: Num, Working range X: 3080, Working range Y-axis: 1200, Working range Z: 280, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: ca.9, rpm 1): 9000-18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Year :2001

Manufacturer: Europress, Type: 1000 VE, Power kg/h: 35 m³/h, Supply case m³: 0,53, Hydraulikal power kW: 5,5, Ballenpresse: yes, Pressdruck kN/ to: 300, Einfüllöffnung b x h x L mm: 700 673, Ballenmass b mm x l mm x h mm : 500 x 650, Ballengewicht kg: 50 - 200, Year :2001

Manufacturer: Wemhöner, Year: 1997, Type: KTV 28/15 - 165, Work piece width min-max mm: 1500, Min.-max. workpiece length in mm: 2800, Min.-max. workpiece height in mm: 10-40, Max. temperature °C: 90 / 180, Placing table: yes, Through running machine: yes, Pressing cylinder: 6, Pin system: no, Landing opening mm: 1, Foil cutter: yes, Through running machine: yes, Year :1997

Manufacturer: Indramat Umrichter, Type: MOD/1X045-001/934401, FREETEXT1: TDM1050-300W1,

Manufacturer: IST, Type: AL-140-4-N-DL, Year: ca. 1992, Number of lamps: 1, Power per lamp watt UV: 80 W/cm, Working widht mm: 1400, Working widht mm: 1400, Conveyor lenght mm: 2500, Rod transportation: yes, Required space L x W x H mm: 2.500 X2.500X1.700, Wight approx. kg: ca. 500, Year :ca. 1992

Manufacturer: Böllhoff Durchlauferhitzer Lack, Type: 1692, Year: 1997, FREETEXT1: Materialüberdruck 250 bar, FREETEXT2: Materialtemperatur max.90 regelbar, FREETEXT3: Prüfdruck 360 bar, FREETEXT4: Nennstrom 13 Ampere, FREETEXT5: Nennspannung 230 Volt, FREETEXT6: Nennleistung 3 Kw, FREETEXT7: Ex geschützt, Year :1997

Manufacturer: Cefla, Type: UV 2000 M2/1600, Work piece width min-max mm: 1600, Working widht max mm: 1600, Number of lamps: 2, kW power 1 lamp: ca.12, kW power all lamps: 46,25, Lampen gerade eingebaut: 2, Lampen von unten: no, Adjustable: yes, Power per lamp watt UV: 80-120 unter<CRLF>vorbehalt, od distance mm: 80, Conveyor lenght mm: 3000, Outer belt width mm: 2800, Working hight approx mm: 60, Conveyor: Stange, Exhaust air diameter mm: 2, Working height in mm: +/--950, Feedin speed m/min: 5-15, Rod transportation: yes,

Manufacturer: Böhl Wickelautomat , Type: SV 1500, Year: 1993, Control: Siemens S 5, Work piece width min-max mm: 300-1200 , Min.-max. workpiece length in mm: 450-2500, Min.-max. workpiece height in mm: 20-900, Belt conveyor: yes, Aligning station: no, Width:165 to 250 mm: yes, Min-max roller diameter mm: 250, Automatic product recording: yes, Belt inlet control: yes, Function repeat: yes, Feeding belt L x W x H mm: ca 1500, Feed out belt L x W x H mm: ca.1500, Foot switch: Handschalter, Year :1993

Manufacturer: Homatic, Type: Ausgangskarte 16x220V, Model: 2us ohne RC-Glied, Serial number: 2-083-01-5203, Nur Abholung : 350,

Manufacturer: Weeke, Year: 1999, Type: aus Weeke BP 195, Motor mit Getriebe: yes, aus Maschine: 195 Weeke, I-KL: 7,5-10, Motor mit Getriebe: yes, Baugrösse L x B x H mm: Werkzeugaufnahme HSK 63 F/18000-24000 Umin/12 KW Spindel, Year :1999

Manufacturer: Homag CPU , Type: SPS II 12 MHz 1MB RAM, Serial number: 2-083-01-5044,

Manufacturer: Haffner , Type: SL 100, Year: ca.1980, Work piece width min-max mm: 550-1050, Face plate aggregate: yes, Key hole boring aggregate: yes, Clamping hight max. mm: 1050, Trench deepth max mm: 150, Trench lenght max mm: 315, Vertikal spindles: 1, Horizontal spindles: 1, Milling chain motor Kw: ca.1,0, Milling widths stop system: 315, Total power kW: 1,5, Lifting device: Pneumatisch, Year :ca.1980

Manufacturer: Inadramat , Year: 1999, Type: MDD 112B-N-040-N2L-130GAO, Motor mit Getriebe: Motor mit Tacho und Zahnrad, aus Maschine: Weeke BP 195 T, MdN Nm: 17,9-29,9, IdN A: 68, n-min: 4000, Motor mit Getriebe: Motor mit Tacho und Zahnrad, Price per unit Euro: 2000, Wight approx. kg: 36, FREE TEXT: Neupreis ca. 4400, Year :1999

Manufacturer: Wire Electronik, Type: GNV 451-20/130, Seriennummer: 85957, Frequenzumrichter: yes, Input: 3X 130 Volt, Output DC Volt: 220 V/50-60 HZ,

Manufacturer: Bürkle, Type: EFA 1300, Year: ca.1990, PVAC-Dispersions-Folienkleber: yes, Work piece length min-max mm: 500-3200, Work piece width min-max mm: 200-1300, Work piece thickness min-max mm: 3-60, Kaschiergeschwindigkeit: 25, Doppelseitig Folienauftrag: yes, Folienrollenmagazin: 1, Feeding speed continous adjustable: yes, Inlet conveyor: yes, Querreinigungsbürste: yes, Bürstmaschine längs: yes, Plattenvorwärmzone: no, Kleberauftragmaschine : yes, Abwickeleinheit: yes, Prägekalander: yes, Leimfilteranlage LFA: yes, Intermediate transport mm: 3000, Year :ca.1990

Manufacturer: Koch Contuorfräsmaschine, Type: Sprint PTP 2 1800, Year: 2012, Control: Beckhoff, Program: Koch-Wop, Online connection: möglich, Machining stations: 2, 4 Achsensteuerung: yes, Work piece width min-max mm: 120-1360, Work piece length min-max mm: 120-1360, Work piece thickness min-max mm: 19-25, Number of milling spindles: 1, Milling spindles horizontal: 1, Tastend Aggregat: 1, Power kW 1: ca.0,75, RPM min-max 1: 18000, FREE TEXT: zusätzliche Festplatte/Windows XP, Year :2012

Manufacturer: Vollmer, Type: CMS 13M, Year: 1994, Bore diameter: 5 - 50, Max. disk diameter in mm: 200, Min-max external diameter mm: 20 - 525, Min.-max. tooth pitch mm: 26 , Year :1994

Manufacturer: Indramat Motor mit Getriebe Atlanta, Year: 1999, Type: MAC93C-0-FS/4HC/110-A-0, Kw output: ca.10, Bauart Flanschmotor: yes, Preis pro Stück Euro: 1500, Available: sofort, Year :1999

Hersteller : Venyeskob , Type: VBS 1300, Year: 1996, Number of units: 2, Engine power - kW: 4, Diameter of brushes: 420, Number of rotations controlled: yes, Units mounted upright: no, Units mounted inclined: yes, Fast exchange device: yes, Polishing width mm: 1350, Axle-diameter: 50, Vacuum belt: yes, Feeding speed continous adjustable: yes, Entstaubungsbürste : no, Gewicht ca. kg : 3000, Year :1996

Manufacturer: Kremlin, Type: 16-120 F, Transmission ratio: 16 : 1, Compressed air bar max: 96, Förderleistung l/min: 6, Druckluft max bar: 6, FREE TEXT: geprüft,

Manufacturer: Tillecke, Type: RM 1100, Year: 1994, Control: hand, Dust removal brush: yes, Diameter of brushes: 220, Compressed air cleaning: no, Number of units: 2, Engine power - kW: ca.2, Number of rotations controlled: no, Working width mm: 1100, Through running hight mm: 80, Feeding speed continous adjustable: yes, Feeding speed min-max m/min: 5-20, Kw-Vorschub: 1,5, FREE TEXT: inkl.Absauventilator, Year :1994

Manufacturer: Num Güttinger, Type: 1060 W, Seriennummer: 134457, war verbaut inMaschine: BP 195, Zustand: gut, Standort 32469 Petershagen: yes, FREE TEXT: Verfügbar sofort,

Cardboard labeling HERMA DS

Manufacturer: Friz , Type: Profi PWP 120/42, Year: 2006, Control: yes, Suitable for veneer and paper: 2D Folie, Film width mm: 450, Gluing system Pu: PUR, Feeding speed min-max m/min: 6 - 40, Feeding speed continous adjustable: yes, roller diameter mm: 152, Work piece width min-max mm: 10 - 450, Min.-max. workpiece length in mm: min 2500, Min.-max. workpiece height in mm: 6 - 150, Overhauled on: 35 Betriebsstunden, Year :2006

wirehood applicator

Handle applicator for carton, tray and six pack