1 mw gas used for sale

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 78 mm -Dimensions: see photo technical drawing -Dimensions: 123/100/H80 mm -Weight: 5.3 kg

Drill bit, step chisel, drill bit for well drilling, core drill, core drilling machine, diamond drill bit, drill bit for well drilling machine -Drill bit: diamond core bit Ø 142 mm -Hole: Ø 125 mm -Dimensions: see photos -Dimensions: Ø 142 x 175 mm -Weight: 3.9 kg

Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: with guide carriage -Centre height: 100 mm -Dimensions: see drawing in the photos -Dimensions: 580/100/H180 mm -Weight: 11.1 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tailstock: center height 125 mm -Type: 36642.M3 -Recording: MK2 -Dimensions: see photos -Dimensions: 270/230/H180 mm -Weight: 8.5 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tailstock: center height 125 mm -Type: 36642.M2 -Recording: MK2 -Dimensions: see photos -Dimensions: 255/200/H170 mm -Weight: 7.1 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tailstock: Center height 83-175 mm adjustable/swivelling -Type: 36642.M31 -Dimensions: see photos -Dimensions: 280/220/H270 mm -Weight: 12.1 kg

Upper support, upper slide, dovetail guide, tool slide, cross table, spindle drive for upper support -Spindle drive: for upper support -Trapezoidal spindle: Ø 20 mm -Dimensions: see photos -Dimensions total: 450/155/H110 mm -Weight: 5.4 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo, compact cylinder type ADVU-20-5-PA 156514 -Stroke: 5 mm -Piston: Ø 20 mm -Piston rod: Ø 10 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 48/37/H37 mm -Weight 0.2 kg./piece

Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: OMP 160 151-0025 6 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 1x unit available -Dimensions: 225/130/H120 mm -Weight: 7.5 kg

Mains filter for frequency converters, PLC control, mains filter, mains filter -Manufacturer: Lenze: Mains filter -Type: E94AZMP0824 -Part.No.: 13430982 -Dimensions: 490/270/H275 mm -Weight: 29.3 kg

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: surface plate with adjustable feet -Length: 2000 mm -Width: 1515 mm -Plate thickness: 130 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 2000/1515/H430 mm -Weight: 3150 kg

SPG. Regulator, generator control, generator voltage regulator, for generator, -Manufacturer: Nucleus, Generator DG1-1000 -Technical data: see photo of the nameplate -Number: 11x generator available -Price: per piece -Dimensions: 320/320/H95 mm -Weight: 4.2 kg/pc.

Clamping plate, marking-out, welding table, welding table, straightening plate, marking-out plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1515 mm -Table height: 800 mm -Plate thickness: 130 mm -Transport dimensions: 2000/1515/H800 mm -Weight: 3250 kg

Bezel, moving bezel, bezel, steady rest, lynette -Bezel: moving -Centre height: 185 mm -Edition: Brass -Dimensions: see photos / technical drawing -Dimensions: 345/70/H370 mm -Weight: 7.7 kg.

PLC controller, central assembly, RAM, CPU, central processing unit, central device Manufacturer: Siemens, Simatic central assembly -Type: ET 200SP F-CPU 6ES7512-1SK01-0AB0 -Dimensions: 100/80/H120 mm -Weight: 0.4 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 1000x800 mm, height 1250 mm -Wall thickness: 90 mm -T slots: slot width 36 mm -Dimensions: see photos -Dimensions: 1000/800/H1250 mm -Weight: 1069 kg

Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 130 mm -Bolt circle: Ø 75 mm -Hole: short cone 3, cone Ø 51 - 53 mm -Dimensions total Ø 130 x 50 mm -Weight: 1.4 kg

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: on solid base frame -Clamping surface: 2015 x 1000 mm -Table height: 930 mm -Plate thickness: 30 mm -Transport dimensions: 2015/1000/H930 mm -Weight: 973 kg

Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 130 x 30 mm -Clamping depth: 125 mm -Dimensions: 405/130/H105 mm -Weight: 18.7 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor Manufacturer: Nucleus, servomotor -Type: NUDrive MP85 10A Bgr2 R Rev2 -Item No.: DS851026 -Shaft: Ø 14 x 37 mm -Number: 11 servo motors available -Price: per piece -Dimensions: 200/85/H85 mm -Weight: 4.1 kg/pc.

Power supply, power converter, power supply unit, switching power supply, DIN rail power supply -Manufacturer: Phoenix Contact, power supply -Type: TRIO-PS-2G/1AC/24DC/20 Ord.No.: 2903151 -Input: AC 100-240V / DC 110-250V -Output: 24 V -Dimensions: 165/70/H130 mm -Weight: 1.3 kg

Bending tool, bending tool, die, upper blade, upper tool, straightening tool -Bending tool: Length 1760 mm -Tool angle: 83° -Dimensions: see drawing in the photos -Dimensions: 1760/28/H144 mm -Weight: 44.6 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: Angle adjustable 90° -Groove width: 28 mm -Groove spacing: 150 mm -Dimensions: see photos / technical drawing -Dimensions: 1000/800/H630 mm -Weight: 871 kg

Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 160 x 50 mm -Clamping depth: 185 mm -Dimensions: 500/160/H120 mm -Weight: 32.5 kg

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, Router, Ethernet Security Router -Manufacturer: ewon, Router T -Type: EC61330 00MA/S COSY 131 -Voltage: 12-24 V -Number: 2 routers available -Price: per piece -Dimensions: 110/100/H45 mm -Weight: 0.2 kg/pc.

Fan filter, fan array, air cooler, control cabinet fan, filter fan -Manufacturer: Rittal, filter fan type SK 3239.100 -Voltage: 24 V DC / 5.5 W -Number: 17 fans available Price: per piece -Dimensions: 205/205/H110 mm -Weight: 0.6 kg

Cable bridge, drive-over protection, hose bridge, cable duct -Cable bridge: overrun protection -Channel width: 20 mm -6 mounting recesses -Quantity: 1 piece available -Dimensions: 985/150/H30 mm -Weight: 4.2 kg

Pneumatic cylinder, flat cylinder, pneumatic drive, piston, flat cylinder -Manufacturer: Festo, flat cylinder type DZH-32-100 PPV-A 14045 -Stroke travel: 100 mm -Piston rod: Ø 12 mm / M10 -Pmax: 10 bar -Quantity: 1 piece -Dimensions: 245/65/H80 mm -Weight: 1 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: Transport belt, belt conveyor -Total conveyor belt width: 250 mm / 2 x 100 mm belt width -Conveyor length: 1330 mm -Drive shaft: Ø 30 x 100 mm -Transport dimensions: 1355/560/H225 mm -Weight: 87 kg

Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator Manufacturer: MS, Ultrasonic welding generator -Type: SoniGEN 35/1000 or similar, unfortunately no exact designation -Power output: kVA -Dimensions: 460/150/H150 mm -Weight: 5.5 kg

PLC controller, central assembly, RAM, CPU, central processing unit, central device -Manufacturer: Siemens, SIMATIC S7-1500 CPU 1515-2 PN -Type: 6ES7 515-2FM02-0AB0 -CPU: 1515-2 PN -Quantity: 3x assembly available -Price: per piece -Dimensions: 125/70/H155 mm -Weight: 0.5 kg/pc.

Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Condition: unused -Outer diameter: 260 mm -Inner diameter: 170 mm -Width: 42 mm -NO SALES BY WEIGHT

Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel, monitor holder -Monitor mount: swiveling, solid construction -Length: 1730 mm -Dimensions: 1730/440/H190 mm -Weight: 22 kg

Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-32-20-PA-GF 170854 -Piston: Ø 32 mm -Stroke: 20 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 101/110/H50 mm -Weight: 1.8 kg/pc.

Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-25-20-PA-KF 170922 -Piston: Ø 25 mm -Stroke: 20 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 93/95/H44 mm -Weight: 1.2 kg/pc.

Adhesive melter, gluing machine, hot glue machine, industrial hot glue gun, melting glue gun -Machine and hose electrically heated -Adhesive melting device type: ALTABLUE 10TT -Adhesive heating nozzle type: EB 11-01 -Dimensions: 620/410/H1255 mm -Weight: 87 kg

Workbench, work table, assembly bench, assembly table, work table -Manufacturer: Lista, workbench solid construction -Worktop: 1590/700/H850 mm -Drawers/Cabinet door: lockable, without key / Layout/height see photos -Transport dimensions: 1590/700/H850 mm -Weight: 123 kg

Workbench, work table, assembly bench, assembly table, work table -Manufacturer: Garant, workbench with base cabinets / solid construction -Worktop: 1500/700/H855 mm -Drawer cabinet: 5 drawers, layout/height see photos -Base cabinet: with trim -Transport dimensions: 1500/700/H855 mm -Weight: 170 kg

Workbench, work table, assembly bench, assembly table, work table -Manufacturer: Lista, workbench, solid construction -Worktop: 1500/700/H850 mm -Drawers/Cabinet door: lockable, without key / Layout/height see photos -Transport dimensions: 1500/700/H850 mm -Weight: 101 kg

Workbench, work table, assembly bench, assembly table, work table -Manufacturer: Lista, workbench, solid construction -Worktop: 1500/700/H850 mm -Drawers/cabinet door: lockable, layout/height see photos -Transport dimensions: 1500/700/H850 mm -Weight: 103 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 1000 mm -Depth: 500 mm -Height: 1880 mm -Door: lockable, without lock -Weight: 98 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 1115 mm -Depth: 500 mm -Height: 1950 mm -Door: lockable, without lock -Weight: 90 kg

Plasma hose assembly, welding torch, MIG/MAG torch -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled -Type: PerCut 100-1/O2 -Item No.: 11.835.421/56615/009 -Length: 7.0 m -Transport dimensions: Ø 570 x 170 mm -Weight: 10 kg

Hook, retaining arm, retaining bracket -Hook: Holding arm -Load capacity: 125 kg -Number: 2 hooks available -price: per piece -Dimensions: 800/325/H125 mm -Weight: 9.4 kg/pc.

Voltage tester, Duspol, voltmeter -Manufacturer: Wobla, voltage tester -Voltage range: 220-660V 0.05-0.25A / 110-750V 0.2-1.5mA -Number: 55x voltage testers available -Price: per piece, minimum order quantity 2 pieces. -Dimensions: 260/100/H40 mm -Weight: 0.3 kg/pc.

Power strips, portable power strips, solid rubber power strips, adapters, construction site power distribution boxes, CEE adapters -Manufacturer: Bals, CEE adapter 32A / 16A -Transport dimensions: 255/145/H165 mm -Weight: 2.6 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 2 doors, solid construction with 8 drawers -Width: 1800 mm -Depth: 710 mm -Height: 2060 mm -Drawers/shelves: See photos for layout/height -Weight: 565 kg

Caster, swivel caster, transport equipment caster, fixed caster -Manufacturer: Tente, swivel caster with locking mechanism/brake -Wheel: Ø 100 mm -Width: 36 mm -Number: 6x swivel casters available Price: per piece -Overall dimensions: 170/85/H130 mm -Weight: 0.9 kg/pc.

Caster, swivel caster, transport equipment caster, fixed caster -Swivel caster: Polyamide -Wheel: Ø 100 mm -Width: 36 mm -Number: 6x swivel casters available - Price: per piece -Overall dimensions: 145/85/H130 mm -Weight: 0.8 kg/pc.

Conveyor belt rollers, transport rollers, roller conveyor, carrying rollers, roller block -Roller block: with 4 polyamide rollers, diameter 32 mm -Rollers: 4x Ø 75 x 40 mm -Transport width: 160 mm, adjustable, see photos -Shaft: Ø 25 mm, supported on both sides -Dimensions: 350/75/H130 mm -Weight: 6.2 kg