1 mw gas used for sale

Key data: 2000 KW, 1500 1/min

Brand New Containerised MTU 16V4000L64FNER Natural Gas Generator Sets Brand new MTU 16V4000L64FNER containerised natural gas generator sets are available. This high-efficiency, low-emission MTU Series 4000 power modules deliver dependable performance for continuous, prime, or standby operation across industrial, commercial, and CHP (Combined Heat and Power) applications. Each unit is factory-assembled and tested in a 40ft ISO High Cube container, integrating the engine, alternator, cooling, ventilation, exhaust, and control systems—ensuring rapid installation and plug-and-play operation and can be delivered anywhere through road, sea or railway transportation. Key Specifications & Features Engine: MTU 16V4000L64FNER, 4-stroke, V16 lean-burn natural gas engine Power Output: Up to 2800 kVA Container Design: Weatherproof, sound-attenuated 40ft High Cube I ...

SALES PROPOSAL GAS TURBINE PACKAGE – SOLAR TAURUS 70 1. General Information Equipment: Industrial Gas Turbine Package Manufacturer: Solar Model: Taurus 70 – 10302S CS/MD Stand Core Turbine Year: 2019 Package Year: 1997 Condition: Used – Good Operating Condition 2. Technical Specifications • Output: 8,500 kVA • Frequency: 50 Hz • Voltage: 11,000 V • Alternator: LS – 6,300 V • Fuel Type: Natural Gas 3. Operating Data • Total Package Hours: 14,517 hours • Number of Starts: 127 • Next Planned Major Overhaul: 30,000 running hours • Borescope Inspection: Completed in 2024 (report available upon request) 4. Key Advantages ✔ 2019 Core Turbine (recent upgrade) ✔ Low number of starts ✔ Recent borescope inspection ✔ Suitable for 50 Hz industrial power generation ✔ Natural gas operation 5. Commercial Terms • Availability: To be con ...

Machine type MIG/MAG inverter welding system Make RILAND Type MIG 180PGDM Supply voltage 1 x 230 volts Adjustment range 15 – 180 amperes Duty cycle 20 % ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly system version Wire feed gearbox 2-roller gearbox Fuse 16 Ampere Dimensions L x W x H 386 x 170 x 300 mm Special accessories TIG welding DC without HF E-welding Weight 8 kg Age 2 years As good as new Scope of delivery welding system with the following accessories: 1 piece welding torch MB 24, 2 mtr. Long 1 piece pressure reducer argon 1 piece ground cable 3 mtr. long, 16 sq m 1 piece electric welding cable 3 mtr. long, 16 sq m 1 piece of aluminum equipment 3 power nozzles aluminum, 1.0 mm Ø 3 pieces of current nozzles stee ...

Gas mixture regulator, Woodward 8442-1005 for sale, with original packaging

Key data: 155

Schnell CHP Biogas Container 160kW. Low hours biogas CHP. Equipped with a Liebherr L4R20.1BO Engine. 155kW electrical 154kW thermal Fuel: Biogas Year: 2016 Hours: 13000h Power: 155kW Voltage: 400V Frequency: 50Hz Scope of supply: fully equipped container (L12,2m W3,2m H3,1m) including engine, alternator, frame, control panel, gas ramp, heat exchanger, table cooler, chimney. Additional 100kW boiler. The engine is currently set to run at 100kW, but power can be increased to 155kW via a software update. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Agilent 1200 HPLC system consisting of: Agilent 1200 G 1312B SL binary HPLC pump (up to 600 bar) Agilent 1200 G 1315B Diode Array Detector Agilent 1200 G 1316 B TLC SL Colcom/column thermostat Agilent 1200 G 1379 Degasser Agilent 1200 G 1330 Thermostat for Autosampler Agilent 1200 G 1367D Autosampler Hip ALS SL + on request with Agilent Chemstation/Warranty

Key data: 1067 KW

we are looking for a Jenbacher 3 1067 kw we have a biogas plant

Offer 24109 Specifications: - 4 spaces for 50L. bottles - Full-length bottle cage - Exhaust air opening - Closet is lockable , key is provided - Required space W 1400 x D 465 x H 2150 mm - Weight approx. 120 kg

TEDOM TB 130 G5V TX 86 Biogas Container Generator Set. Hrs: 0 Year: 2017 Capacity: 130,4 kW Voltage: 400 V Fuel: Biogas Scope of supply: Complete Containerised Biogas CHP Generator Set - Engine, Alternator, Base frame, Control panel, Gas line, Radiator, Exhaust gas heat exchanger, Chimney, Control system, Circuit breaker and Container. Service History : The machine has not been commissioned and has not been maintained since the installation. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Gas boiler for sale inklusive Weishaubt gas burner panel gas string and soundbox Price 3500 euro loaded on truck

Key data: 6300 KW, 7400 kVA, 11000 V

Wartsila 18V32DF genset Engine output: 6.300 KW Year of built: 2008 Working Hours: 35.664 hours Alternator Type: LEROY SOMER SA 58 XL11/8P Volt. / Hz / Phase: 11 KV / 50Hz Power Rating: 7400 kVA / 6.3 Mw Speed: 750rpm Sold together with auxiliary equipments please contact us for more information regarding scope

Key data: 6300 KW, 7400 kVA, 11000 V

Wartsila 18V32DF Dual Fuel Gensets Engine output: 6.300 KW Year of built: 2008 Working Hours: 35.664 hours Alternator Type: LEROY SOMER SA 58 XL11/8P Volt. / Hz / Phase: 11 KV / 50Hz Power Rating: 7400 kVA / 6.3 Mw Speed: 750rpm Sold together with auxiliary equipments please contact us for more information regarding scope

Key data: 1200 KW

Output power 1286 kw Voltage 400 V Frequency 50 Hz Generator Stamford , Base rating 1416 kw

Spiral wound gasket, labyrinth body gasket, flange gasket -Spiral seal: Flange seal according to DIN EN 12560-2 5 pieces/package -Type: 2 1/2 150lbs 1.4404/PTFE -Dimension: Ø124 x 2mm -Price: complete -Total weight: 0.7 kg

ring cutting machine, cutting device, cutting pliers, cutting machine, ring, disc, segment and strip cutting machine, ring cutting machine -Manufacturer: Klinger, ring cutting machine -Cutting range: 80 - 1250 mm -Cutting thickness: up to 9 mm -Dimensions total 1100/170/H280 mm -Weight: 6.4 kg

Aprovis FriCon Gas Dehumidifier and Desulfurizer Plant for cleaning Biogas. Biogas cleaning plant including APROVIS FriCon 150/500-40-15-2-I0 Gas Dehumidifier and Desulfurizer Plant. Type: ESA 44,8m³ Year: 2019 Fuel: Biogas Scope of supply: Gas Cooler, Air Cooled Liquid Chiller, Base Frame for Gas Dehumidifier, Insulation, Demister DN 200, Syphon. Technical data for Desulfuriser Plant: >3.000 mg/m 3 H 2 S and 600 Bm³/h Gas flow: 600 Bm³/h (at around 37-40 o C) H 2 S-Input concentration: 2.000 ppm (3,000 mg/m³) Gas temperatures (entrance): 25-40 o C H 2 S load: maximum 1.800 g/h Columns pressure loss: < 3-8 mbar Pressure level: 45 mbar (Test pressure 50 mbar) Low pressure: maximum –10 mbar. Minimum inlet pressure: 2-4 mbar Hot water: DN=32 Dung use: app. 3,0 kg per day full load (approx. 110-115 Ct costs 1 kg) Extra air: 11-14 % Container/tank size: approx. ...

2008 Herco ACR SYSTEM 23-1000 ACTIVATED CARBON RECOVERY SYSTEM Gas recovery system The installation is 10 years old, has a max. adsorption capacity for 75 fridges per hour, with a suction capacity of 850 m³/h. It is a system with activated carbon adsorption, with desorption over a cryo-unit. Designated Application Scope of Application The delivered recovery plant is designed and manufactured for reclaiming propellants refrigerator recycling. The propellants, vaporized during the shredding process, are sucked off from the shredder and adsorbents in the recovery plant. Other applications are not provided. If the plant is used for other applications, only the user carries the whole risk for damages. General data Application : Propellant recovery Plant designation : Activated carbon recovery system Plant type : ACR-SYSTEM 23-1000 Year of construction : 2008 Technical data  ...

Machine Type: MIG/MAG Inverter Welding Machine Make Merkle Type MobiMIG 180 K Serial No. 89.754 Connection voltage 1 x 230 Volt Adjustment range 25 – 180 amps Duty cycle 20% ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner gas-cooled Portable assembly system design Wire Feeder 2-Roller Gearbox Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special Accessories ColdMIG Welding Process E-welding, MIG soldering, cored wire welding Weight 17 kg Age 12 years Condition workshop tested, very good incl. UVV workshop test report Scope of supply welding system with the following accessories: 1 piece of welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick sp ...

Key data: 3500 V, 6300

BERGEN KVGS-18G4.2 Generating Set Fuel: Natural Gas Voltage: 6300 V Complete Overhaul at 50.363 hrs, stopped in April 2023. Scope of supply: Engine 750RPM, Alternator, Control panel, Gas line. In these engines the top-end is done every 15,000 hours. In the Major overhaul, there is no need to disassemble the crankshaft because in these models the bearings can be disassembled without having to remove the crankshaft, everything is done on-site. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Key data: 1425 KW, 1600 kVA, 6300 V

Kawasaki Gas Turbine GPB 15D Gas turbine from 2006 with 32,000 operating hours, 1 available 1,280 KWel x 1,500 rpm, 6,300 V/50 Hz. AC Generator: AEM SEH 500 L4, 1,600 KVA Manufacturer: Kawasaki Model No.: M1A-13D Type: Gas Turbine Serial Number: KHI-1012 Power [KW]: 1,425 Year of Make: 2006 Operating hours: approx. 32,000 Weight unit [kg]: 12,000 Dimensions unit LxWxH [cm]: 870 x 290 x 310 AC Generator Manufacturer: AEM Model: SEH 500 L4 Type: AC Synchronous Generator Serial number: 3085 00218 Power [KVA]: 1,600 Voltage [V]: 6,300 Frequency [Hz]: 50 Current [A]: 175 Speed [1/min]: 1,500 Year of Make: 2006 Weight [kg]: 6.460

Key data: 2866 KW, 6300 V

2 x Wartsila 16V25SG Combined Heat and Power (CHP) generators These engines were installed but only run for a short time. They have been kept in a heated location when not in use. Scope of supply: CHP generating set including Engine, Alternator, Base Frame, Control panel, Gas line. Notes: There are 2 Wärtsilä Generators and another one with a broken cylinder head that can be used for spares. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

LPG forklift, gas forklift STILL type RX 70-16TSeries No. 517314G00021 Year of construction 2016Nominal load capacity 1600 kgLifting height 4920 mmFork length 1000 mmCarriage width 980 mmOverall height 2160 mmTotal width 1100 mmTotal length without forks 2200 mmNet weight 3040 kg- Triplex mast with full free lift 1550 mm- Hydraulic sideshift- LPG electric drive- 4-cylinder Volkswagen LPG engine with 30 kW- Hydraulic auxiliary steering- Front working lights- Reversing Warning light (blue)

Key data: 87 V, 400

5 x Containerised Himonsia HGP-110 T5 LPG gensets Fuel: LPG Scope of supply: Engine, Alternator (Stamford), Control Panel, Bunded Tank, Charger, Heater, AMF Panel, Canopy. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Key data: 5980 , 6900

Available complete natural gas power plant of a Wartsila 18V34SG. The engine stopped running a full load with all the maintenances done. The aeros for the cooling system are not included, only the exchangers. Brand: Wartsila Model:18V34SG Brand Generator: ABB Power: 5980kW Fuel oil: Natural Gas Yom:12/1999 RPM: 750 Hours:133000 hours We can have 1 more units.

Key data: 1600 KW, 2000 kVA, 400 V

MTU 16V 400 L61 1600 kw 2000 kva Stamford PI743F2 1500 rpm 50hz 400Volt 18.000 hours after major overhauling Genset including control panel, Gasline, heat island with pumps and exhaust gas cooler Genset is located in our warehouse in the netherlands: Kranenpool 10 6443VA Brunssum NL check our website for more generators and accessories: generalpowerholland.nl

Key data: 2080 KW, 2711 kVA, 11000 V

Containerized Gas Generator Set MTU 16V4000 2MW at 11kV 50Hz UK Power Generators Ltd is offering a Brand New Containerised Generating Set for your next project. We have multiple units ready to move stored in suitable environment manufactured by MTU Germany Model 16V4000L64FNER with proven reliability for its users. These 2MW turnkey solutions package with 11,000 V, 50 Hz & 1500 RPM is a great opportunity for those waiting to acquire a reliable source of energy for their industrial or commercial purposes. These units are available immediately without any lead time from the factory. Why you should buy these units from UK Power Generators Ltd: No Lead time Turnkey package - quicker installation ISO Standard container 40ft - CSC Approved for shipping worldwide Brand New Units - Same excellent condition as from the factory MN 80 Gas known for its higher efficiency Ze ...

WÄRTSILÄ 18V34SG – 5.5 MW Gas Engine for Sale We offer a complete Wärtsilä 18V34SG generating set available in Europe. Engine 18V34SG 5,531 kW 750 rpm 50 Hz Year: 2000 Generator ABB 6,000 kVA 6.3 kV 50 Hz

Key data: 1237 KW, 1650 kVA, 10500 V

Introducing the new Caterpillar Gas Generator, Model CG 170-12, manufactured in March 2017. This generator is in new and unused condition, with the following specifications: - Power: 1237 kW - Speed: 1500 RPM - Alternator: Marelli Motori (Made in Italy) - Output: 1650 kVA - Voltage: 10,500 - Frequency: 50 Hz - Serial Number: 2213373 If you have any questions, please get in touch with us. #caterpillar #energy #power #gas #gasgenerator #new

Key data: 100 KW, 220 kVA, 400 V

Kuntschar & Schlüter gas-fired CHP GTK 100 Gas electricity and heat generators from 2016, 46,197 operating hours, with electrical cabinet and silencer. 94 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: MarelliGenerators MJB 250 LA4, 220 KVA Manufacturer: Kuntschar & Schlüter Model: GTK 100 Type: Natural Gas CHP Serial number: 01345 Engine: HMG 645 S Engine power [KW]: 100 Electric power [KW]: 94 Thermal power [KW]: 143 Year of Make: 2016 Hours: 46,197 Dimensions LxWxH [m]: 3.5 x 1.05 x 2.00 Total unit weight [kg]: 3,850 AC Generator: MarelliGenerators MJB 250 LA4 Manufacturer: MarelliGenerators Model: MJB 250 LA4 Type: AC Synchronous Generator Serial Number: MDMO1565 Power [KVA]: 220 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 318 Speed [1/min]: 1,500 Year of Make: 2016 Hours: 46,197 Weight [kg]: 650

MTU 12V4000L64FNER12 Natural Gas Containerised Generator Set. Make and model: MTU 12V4000L64FNER12 Capacity: 1,500 kW Voltage: 11,000 Frequency: 50 Hz Scope of supply: Engine, Alternator, Base frame, MIP & MCS Gas Genset, Control System, Gas Line, Radiator, Exhaust System, Container. This is for electricity only and is available for immediate delivery. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange

Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve -Manufacturer: Siemens, gas solenoid valve unused OVP -Type: VGS10.104E2 -Voltage: 230 V 50 Hz -Connection: 3/8 -Pmax.: 1000 mbar -Number: 20x valve available -Price: per piece -Dimension box: 110/70/H40 mm -Weight: 0.6 kg/piece

High-pressure radial fan, dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Exhaust gas exhaust fan -E-motor: Lammers 400/690 V/3 kW -Fan: Hansa Ventilatorenbau Type BC 280-5/4K-X/UX 1101 -Speed: 3179 rpm -Volume output: 2160 m³/h -Connection input: Ø 735 mm -Connection output: 365 x 310 mm -Dimensions: 1300/740/H820 mm -Weight: 153 kg

Shock absorber, gas spring, shock absorber, start-up damper, impact damper -Manufacturer: GSL (German Standard Lift), Gas spring, Gas pressure spring, 2 pieces -Type: 250N 11/14287251554/00101 -Piston: Ø 28 mm -Piston rod: Ø 14 mm, length 750 mm -Socket: M10 x 1.5 -Price/Fee: complete -Dimensions: Ø 28 x 1585 mm -Weight: 2.1 kg/piece

Shock absorber, gas spring, shock absorber, start-up damper, impact damper -Manufacturer: Bansbach, gas pressure spring easylift type HONOF42-550-1164-018 080N -Piston: Ø 22 mm -Total length: 1200 mm -Piston rod: Ø 10 x 550 mm -Number: 37x gas pressure spring available -Price per piece -Dimensions: Ø 22 x 1200 mm -Weight: 0.9 kg/piece

Shock absorber, gas spring, shock absorber, start-up damper, impact damper -Manufacturer: Bansbach, gas pressure spring easylift type HONOF32-700-1447-001 050N -Piston: Ø 22 mm -Total length: 1465 mm -Piston rod: Ø 10 x 700 mm -Number: 2x gas pressure spring available -Price per piece -Dimensions: Ø 22 x 1465 mm -Weight: 1.0 kg/piece

Shock absorber, gas spring, shock absorber, start-up damper, impact damper -Manufacturer: Bansbach, gas pressure spring easylift type HONOF42-685-1417-001 060N -Piston: Ø 22 mm -Total length: 1435 mm -Piston rod: Ø 10 x 685 mm -Quantity: 20x gas pressure spring available -Price per piece -Dimensions: Ø 22 x 1435 mm -Weight: 0.9 kg/piece

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Exhaust fan: heat-resistant -Dust extraction fan: radial fan -Motor: 7.5 kW 1465 rpm -Connection: Inlet Ø 600 mm -Connection: Outlet Ø 400 mm -Volume flow: m³/h -Dimensions: 1985/1570/H1780 mm -Weight: 442 kg

Key data: 1100 KW, 1375 kVA, 10500 V

Weshai Baudouin Gas Generator New 1 MW skid-mounted gas generator, including cooling and exhaust systems. 50 Hz/10500 V. These generators have proven themselves in Ukraine. Price listed is FOB China. Factory warranty, CE certification, and customization options available to suit any project. WhatsApp +38 050 323 99 22

Key data: 70 KW, 80 kVA, 400 V

Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas electricity and heat generator from 2013 with 58,278 operating hours. 1 available 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial Number: 7411148 3 02060 108 Engine: MAN E0836 E302 Power [KW]: 75 Power [KWel]: 70 Year of Make: 2013 Hours: 58,278 Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 340 x 90 x 180 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 299161/1 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2013

AGFA AccuSet 1000 WE. System is completely tested and cleaned. Resolutions: 1200, 1800, 2400 and 3000 dpi - including Techkon film densitometer. We will be happy to send you further information and pictures. Available now

1 x Farrel Bridge model 11D Banbury internal mixer, machine number: 90R2022, Year: July 1991, Pneumatic hopper + extension neck, SSA dust seals, 2 wing rotors, Hydraulic drop door with Linear actuator, Wyco semi unidrive gearbox, with 875Kw, 440V AC variable speed motor with Alston syncdrive controls. In good condition.

Manufacturer: Nagema . fountain pen Varifill 110/15 regulation: Glass. construction year: In 1995 Type: Monoblok 110/15 technical data: To -110 filling valves to-15-figure Kronenkorker - run direction: left on the right -Doppel-Evakuierung control: Siemens S5

; ready for operation

Q Ferquenzumrichter 140kVA ABB - AV GmbH ACS607-0140-3 Fig. 4 quadrant converter (Rückspeisefähig!) compl. built in switch cabinet. Dimensions H = 2010 T = 640 B = 1200 (2-door). Technical data: Eingangsfreq. 46.63 Hz Ausgangsfreq. 0.. 300 Hz U = 380TH. 415V IP21 (Cabinet) Wiring diagrams available ABB Manual: ABC://abc05.ABB.com/global/Scot/scot201.nsf/veritydisplay/fdc8e06693b9 114ac2256df0003fe70e/$file/en_6047hw_5d_scrres_plus_update_note.PDF Net price in FU Wardrobe (2 PCs.) 6,500 Questions under 0170 / 2204056 or fa.raupp@t-online

1. CUTTER HAED WITH KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 2. CUTTER HAED NO KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Cylinder head DB OM 636 completely repaired with valves € 795,- contact: MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven/Germany phone:0049(0) 4281-950583 fax :0049(0) 4281-950585 info@miw-zeven.de abc.miw-zeven

Offer Stephan micro-cut type: MCHD 180 year: approx. 2003 -Drive: 95 KW - 50 Hz - output per hour worked: approx. 2500-up to 8500 kg (product dependant) funnel version with screw on the motor shaft - cutting set diameter: 180 mm - including a new set of cutting (cutting heads: level 1, Z 24;) Level 2, no. 24) (cutting rings: 2 x MCH-D 180, gap size on request from 0.2 mm to 3.0 mm) price of the machine including a new blade set: 42.900,00. Price 34.900,00 the machine without a blade. Warranty: 3 months, excluding wear parts electro-no metal abrasion

: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 125 Engine type: 1130-1190 Year of construction: 1992 Power: 125 m ³/h Speed: 1000 rpm KW: 2.7

Sell large items Kentron quadrant 1000 PEEK. Material comes from corporate insolvency, in stock. Different batches. Delivery possible, shipping costs on request. Payment in advance. The post includes: Round material length 1000 mm each. 3 piece diameter 20mm 3 piece diameter 25mm 4 piece diameter 30mm 4 piece diameter 40mm