1 mw gas used for sale

Machine Name: High Pressure Pump Used Manufacturer: Uraca Type: RS708E/100 Year of Make: 1997 Degree of protection: IP 55 Speed: 556 rpm Operating voltage: 400 / 690 V Flanges: DN 80 Frequency: 50 Hz. Delivery pressure: 100 bar Material: Steel Drive motor: 45 kW Flow rate: 237 L/min. Dimensions: L 1700 x W 700 x H 850 mm Curb weight: Weight 1500 kg Technical documentation: No Condition: Used Price: On request

Laboratory fume cupboard, fume cupboard, suction -Input: 230 volts AC -Dimensions: 1200/875/H1255 mm -Weight: 176 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 1000 x 600 mm -Depth: 500 mm -Edge: 14 mm -Price: per piece -Number: 1x available -Dimensions: 1030/630/H500 mm -Weight: 26 kg

2 BOLZ sterile tanks with agitator. volume 16,150 liters max. excess pressure 3.2 bar max. allowable working temperature 150 °C double jacket --> YES Volume double jacket 1,000.0 liters Dimensions: diameter inside 2.490 mm diameter outside 2.580 mm cylindrical height 2.500 mm total height 5.000 mm wall thickness bottom 6 mm wall thickness cylinder 8 mm Full drawing of the tanks available. Used, but in good condition. Visit possible

Standpipe valve 1 1/2 for wash basin -Basin depth: 300 mm -Water level: 270 mm -Number: 37x available -Price: per piece -Weight: 0.4 kg

Saw blade, wood saw blade, circular saw blade -04 43 184 -Ø 180x4.0x60x28 -n max. 9600 -Price per piece -Number: 1x available -Weight: 0.7 kg/piece

Saw blade, wood saw blade, circular saw blade -105311-188267 -Ø 180x3.2/2.2 -Z 36 -n max. 10600 -Price: per piece -Number: 1x available -Weight: 0.5 kg/piece

Max. blank / workpiece over bed1200 Max. blank / workpiece in the gap2400 Ø Centre height over bed600 mm Distance between centers2350 mm Length of the gap400 mm Maximum sheet thickness6 mm Stroke X-Axis1200 mm Stroke Y-Axis300 mm Speedrange6 - 675 Rpm Power40 kW Stroke pinole quill750 mm

Key data: 6000 mm, 2000 mm

Ram travel (W) 1,200 mm Taper ISO 50 P.D.B. RPM 10 - 4,000 kW 22 Volts 400 A.T.C. 40 positions

Drain valve for wash basin -Outer: Ø 80 mm -Inside: Ø 50 mm -Connection: Ø 47 mm -Number: 13x available -Price: per piece -Weight: 0.1 kg

Standpipe valve 1 1/2 for wash basin -Basin depth: 350 mm -Water level: 320 mm -Number: 14x available -Price: per piece -Weight: 0.4 kg

Standpipe valve 1 1/2 for washbasins -Bath depth: 400 mm -Water level: 370 mm -Quantity: 12 available -Price: per piece -Weight: 0.5 kg

Programmable digital control Steam function as option Optimal size for 400/800x600mm baking trays Optionally with base-stand or fermentation cabinet Temperature range from 50°C to 400°C Turbo-mode with extra heater Ideal for medium size to bigger size bakeries Model: PB3M - 128 Dimension internal: 124 x 84 x 18 cm x 3 Dimension external: 166 x 104 x 210 cm Power: 3 x 13,3 kW, 3NAC I 400 V Proofer: 162 x 90 x 70 cm 40 x 80 cm (3x5) - 3 kW 230 V Weight: 722 kg

Stainless steel chimney cover, chimney cowl -Inside bracket spacing: 460 mm -Dimensions: 755/1065/H400 mm -Weight: 14 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 300 mm -Depth: 150 mm -Edge: 17 mm -Drain: Ø 52 mm -Number: 7x available -Price: per piece -Dimensions: 340/H150 mm -Weight: 2.1 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 420 mm -Depth: 180 mm -Edge: 18 mm -Drain: Ø 54 mm -Number: 2x available -Price: per piece -Dimensions: 460/H180 mm -Weight: 2.5 kg

Machine type: Vacuum dough divider Model: VD 100-700 The dough dividing machine is the latest system of dough processing technology Cut the dough to the required weight without pressing and damaging it All surfaces that come in contact with the test are made of stainless steel Weight range: from 100gr to 700gr Capacity: 1800 - 2400 pieces per hour Dimensions: 1370/1780 x 650 x 1600 mm Weight: 420kg Electrical power: 1.75kW

Hand wash basin, wash basin, welded-in basin, welded-in swivel basin -Stainless steel sink -Internal dimensions: 380 mm -Depth: 180 mm -Edge: 22 mm -Drain: Ø 54 mm -Quantity: 1x available -Dimensions: 425/H180 mm -Weight: 2.1 kg

Sales counter, counter, stainless steel, cabinet, work table -Drawers: 2 -Table dimensions: 700/1600/H830 mm -Roof dimensions: 1800/1670/H2330 mm -Design: stable -Transport dimensions: 2060/730/H870 mm -Weight: 120 kg

Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 1320 mm -Length: 3530 mm -Height: 830 mm -Plate thickness: 75 mm -Plate: with support ribs -Groove width: 23 mm -Weight: approx. 3500 kg

Dough laminator Ital Form Robust construction Large cylinders ensure excellent lamination, as well as reliability and high durability Dimensions of the open machine: 3380x1010x1160mm Dimensions of the closed machine: 1080x1010x2250mm Tape length: 1200mm Electric power: 0.75kW / 1.1kW Voltage: 400V 50Hz Maximum quantity of workable dough: 8kg Machine weight: 250 kg

Gear motor, electric motor, stop motor, drive motor -comes from a Homag double-sided edge banding machine -Power: 3.2 kW -Speed: 2850 rpm -Construction: B5 -Shaft: Ø 28 mm -Protection class: IP54 -With external fan: 0.05 kW 2520 rpm -Dimensions: 440/240/H210 mm -Weight:

Position transducer, actuator for valves, valve drive, actuator, servomotor -Type: T 100 a 502 -Weight: 0.3 kg

Control unit, control, for power generator, emergency power generator, generator, aggregate, power generator, emergency power generator, power generation aggregate -Type: Compact 166-S -Number: 2x controls available -Price per piece -Dimensions: 490/110/H110mm -Weight: 2kg

Inductive conductivity transmitter -Type: 2 AMLid-184 -Sensor immersion depth: 1115 mm -Total length: 1337 mm -Weight: 3 kg

Dough laminator Ital Form Robust construction Large cylinders ensure excellent lamination, as well as reliability and high durability Dimensions of the open machine: 3380x1010x1160mm Dimensions of the closed machine: 1080x1010x2250mm Tape length: 1500mm Electric power: 0.75kW / 1.1kW Voltage: 400V 50Hz Maximum quantity of workable dough: 8kg Machine weight: 250 kg

Position computer, position scanner -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm -Weight: 12 kg

Position computer, position scanner -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm -Weight: 12 kg

PLC control -Type: Simatic S7 6ES7 138-4FA04-0AB0 -Number: 39x available -Price: per package -Weight: 0.3 kg

PLC control -Type: Simatic S7 6ES7 132-4BD02-0AA0 -Quantity: 5 available -Price: per package -Weight: 0.2 kg

Type: Meat breading machine Manufacturer: Ital Form Liquid and dry panada Band width: 150 mm Belt speed adjustable with a speed regulator Electric power: 2 kW, 220 V Capacity: 2100 pieces/hour External dimensions: 870 x 420 x 650 mm Machine weight: 70 kg

grinding diameter: 1000 mm grinding length: 2000 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PLC control -Type: Simatic S7 6ES7 138-4FB03-0AB0 -Number: 28 available -Price: per package -Weight: 0.3 kg

PLC control -Type: Simatic S7 6ES7 138-4CB11-0AB0 -Number: 12x available -Price per piece -Weight: 0.1kg

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1500 liters Machine dimensions in cm: Length: 240 Width: 144 Height: 210 Electric power: 5 kW

faceplate diameter: 1000 mm turning diameter over slide rest: mm turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Profibus single module, for PLC control, fieldbus, PROFIBUS -Quantity: 10 available -Price: per piece -Weight: 0.2 kg/piece

Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS -Stations: 10 -Price: per station -Weight: 0.4 kg/piece

x-travel: 850 mm y-travel: 630 mm z-travel: 500 mm Control: Heidenhain : total power requirement: 16 kW dimensions of the machine ca.: 5 x 4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 90 l/min tank contens: 100 l voltage: 220 / 380 V tank dimensions ca.: 800 x 380 x 400 mm height with motor ca.: 900 mm power capacity: 2,2 kW weight: 57 kg Condition: unchecked: Base: 820 x 390 x 650 mm The capacity liter is estimated because on the type of the motor is model KMR 90 L 4. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power supply, converter, power inverter, power supply unit -Type: PE 1980/20 U -Input: 220 VAC -Output: 5 VDC 200A -Dimensions: 200/320/H130 mm -Weight: 8.5 kg

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL-P 12001.20 Year of Make: 2007 CNC control 1 plasma torch with power source Kjellberg HiFocus 160i Extraction table: 2 x 12 m Donaldson Torit DCE filter system

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...

Switching power supply, control unit, modem, power supply -Type: SPA 15-11810 -Price: per piece -Number: 8 available -Weight: 0.6 kg

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...

Number of spindles: 6 St. Working width: 230 mm Working height: 160 mm Length of the planing table: 1050 mm Feed motor: 7 kW Feed speed: 6-40 m/min. Weinig Powermat 1200 ---------------------------------------------------------------------- - with infeed automation Weinig wheel magazine EM 100 and linked with outfeed automation Weinig High-Mech A 1 The machine will be completely checked in our warehouse before delivery! Detailed description: ---------------------------------------------------------------------- - 1. Weinig planer and moulder Powermat 1200 ---------------------------------------------------------------------- - Technical data: ------------------------ Working width 20 - 230 mm (with tool flight circle 93 - 163 mm) Working height 10 - 160 mm (with tool flight circle 93 - 163 mm) 1. Spindle ----------------------------- First lower horizontal spindle Motor with brake 7.5 KW ...

Machine Details Stock-No. 1105-04032 Type of machine Vertical Turning Machine Make INDEX Type V 160 C Year of manufacture 2005 Type of control CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis ex site Price Technical details turning diameter 250 mm swing diameter 300 mm turning height 210 mm control SIEMENS 840 D Travel -X Axis 490 mm Travel -Z AXIS 260 mm external spindle dia. In forward position 110 mm turning speed range - spindle 5000 rpm Turret (X-Stations) 12 weight of the machine approx. 7.3 t dimensions of the machine approx. 3.2 x 2.3 x 2.3 m Accessories Chip conveyor Coolant system Additional information CONTROL SIEMENS 840 D WHIT TURRET 12 POSITION VDI 30 AND 2 FIXED TOOLS SUPPORT EXTR MOOWING TOOLS AND C AXIS WITH LOADING AUTOMATION

Brand: Bassra Type: BMT-1000 Kind: Butyl Extruder Max speed: 1k/per min. Output Capacity 30kg. Hopper capacity 3 temperature controls Digital readout of temperature zones Programmable temperature controllers Progressive kit heating funnel 3 meter hose Positive displacement gear pump Undertemperature on all zones Miniature circuit breaker Photos/film available: Photos available Other: Gun is missing 11.1.180

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 80 bar -Liter output: 18 l/min -Hydraulic tank: liters -Dimensions: 700/355/H830 mm -Weight: 200 kg

Boat accessories, ship accessories, spreader schooners, mooring schooners, fenders, lifeline cushions, railing schooners, boats, ships -approx. 180 positions boat accessories - see photos -we can send you the complete photos of the positions - will only be sold complete