1 mw gas used for sale

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 2.3 rpm -Power: 0.025 kW -Construction: B5 angle -Diameter shaft: 14 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 280/180/H110 mm -Weight: 5.5 kg

TRUMPF Trumabend 125/3.1-DA24 hydraulic Press brake YOM 1994 Pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm total power requirement 15 kW column arm 350 mm ajustment speed 130 mm/sec work speed 1-10 m/min return speed 100 mm/sec back stop - adjustable 1000 mm Stroke 200 mm dayligth 400 mm Pressure power 280 bar dimensions of the machine ca. 3,6 x 2,3 x 2,8 m weight of the machine ca. 9,5 t Control unit CNC Maker of control unit DA24 4-Axis Control (y1,y2,x,r)

Gear motor, electric motor -Speed: 89 rpm -Power: 1.1 kW -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 500/250/H210 mm -Weight: 35 kg

Gear motor electric motor Electric gear motor -Speed: 16 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 54 -Dimensions: 620/300/H260 mm -Weight: 54 kg

COLLY 1410S Press brake Bedknife Multi V-shaped clamp Capacity 140 t x 4050 mm Max. operating pressure 220 Passage between uprights 3100 mm Max stroke 7 - 250 mm Max distance between table and ram 500 mm Depth of throat 300 mm Table width 190 mm Locking speed 40 mm/sec Working speed 7 mm/sec Returning speed 50 mm/sec Dimensions 4250x1800x2995mm

• This workstation was configured for a cleanroom class D and max. for OEB3 substances (medium toxic material) • Via the laminator in the bonnet area, H 14 filtered clean air in ISO 5 quality in accordance with EN 14644-1 with unidirectional flow and a flow velocity of 0.17 m/s to 1.00 m/s - depending on the product and task - is channelled into the interior of the barrier above the product, creating a cleanroom zone. • The visible surfaces are made of stainless steel 1.4301 and are brushed (RA

power capacity: - kW tool adaptor: KOMET PKB 200-20-112 total power requirement: - kW weight of the machine ca.: 700 kg dimensions of the machine ca.: 1,6 0,7 1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 370 - 800 mm weight of the machine ca.: 650 kg dimensions of the machine ca.: 20,41,3 m Open steady rest / setting block - fixed with 4 quills Bed width approx. 360 mm Total base width approx. 720 mm Centre height approx. 500 mm Space requirement approx. 1950 x 400 x 1300 mm Weight approx. 650 kg Working range: approx. Ø 370 - 800 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 x KSB Pump ETANORM G 150-250 G10 Motor 1LG4183-4AA60 SN 02 – used - : Price per piece from location: 5.750.-€ (net) Manufacturer: KSB Type: ETANORM G 150-250 G10 Serial number: 9971143054 000100 02 and 03 Year of Make: 2007 Q400.00m3/h H 14,00m N 1460 1/min Condition: good Available: immediately Location: Frankenberg camp / Saxony

Gear motor, electric motor -Speed: 490 rpm -Power: 2.2 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 52 kg/pc.

8 boxes (16 rolls, 10,000 labels each) labels for label printers, Logopak, 170x75, – used - : Price for complete acceptance: 150.-€ (net). Manufacturer: Logopak Type: 170x75 Label rolls: 2 per box Labels on Roll: 10,000 pieces Per box 20,000 pieces Labels Condition: very good Available: immediately Location: Frankenberg camp / Saxony

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2880 rpm -Shaft: Ø 32 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 490/340/H260 mm -Weight: 67 kg

Centrifugal water pump -Conveying capacity: 2.9 m³/h -Max. H: 26 mws -Motor power: 3 kW -Speed: 2900 rpm -Pipe connection inlet: DN 63 -Pipe connection outlet: DN 40 -Weight: 45 kg

Brake motor, three-phase motor, electric motor -Electric motor: with brake -Power: 2.2 kW -Speed: 945 rpm -Shaft: Ø 28 mm -Shaft length: 60 mm -Design: B3 -Brake: 380V -Protection rating: IP 44 -Quantity: 2x available -Price per piece -Weight: 53kg

Three-phase motor, electric motor -Power: 11 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 610/410/H330 mm -Weight: 100 kg

Gear motor, electric motor -Speed: 10.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 54 -Dimensions: -Weight: 59 kg

wire electrode, welding wire, welding wire -Metal powder: - Cored wire -Net weight: 15 kg -Number: 28x packages available -Price: per package -Weight: 15.6kg/package

Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 2x packages available -Price: per package -Weight: 7.6kg/package

DC motor, servo motor, gear motor, electric motor, direct current, gear motor -Speed: 40 rpm -Power: 0.19 kW -Construction: angle -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Number: 2x motors available -Price: per piece -Dimensions: 310/150/H160 mm -Weight: 10 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 4 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 60 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 800/300/H350 mm -Weight: 68 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Transfer in current condition as seen -Speed: 20/63 rpm -Power: 0.5/0.9 kW -Construction: B3 -Shaft diameter: Ø 35 mm -Protection class: IP 44 -Dimensions: 680/195/H320 mm -Weight: 53 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Power: 0.6/0.9 kW -Speed: 10/20 rpm -Design: B3 -Shaft diameter: 40 mm -Protection class: IP 44 -Speed: 740/1420 rpm -Dimensions: 660/280/H300 mm -Weight: 61 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -External milling cutter: Ø 180 mm -Height: 14 mm -Socket: Ø 35 mm -Radius -1x: right -1x: left -Price: complete -Weight: 9.1 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 160 mm -Height: 45 mm -Radius -Support: Ø mm -Weight: 5.6 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 180 mm -Height: 35 mm -Radius: 25 mm -Socket: Ø 30 mm -Weight: 5.8 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 83 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -with: electrical separation coupling -Dimensions: 530/160/H230 mm -Weight: 23 kg

Three-phase motor, electric motor, gear motor -Power: 3 kW -Speed: 950 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 480/310/H320 mm -Weight: 52 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 223 rpm -Power: 2.2 kW -Construction: B5 -Diameter shaft: O 30 mm -Protection class: IP 33 -Price per piece -Quantity: 2 pieces available -Dimensions: 600/270 / H250 mm -Weight: 41 kgpc.

Centrifugal pump, water pump -Type plate: unfortunately not available -Delivery capacity: 20-50 m³/h -Max. H: 14-9 mWs -Motor power: 1.85 kW -Speed: 2825 rpm -Pipe connection inlet: DN65 -Pipe connection output: DN40 -Dimensions: 540/290/H310 mm -Weight: 49kg

Stainless steel couplings, pipe coupling -Type: FLEX 1L 114.3 -Inside: Ø 114.3 mm -From: 112.5 to: 116.0 mm -Pressure: 21 bar -Dimensions: 150/150/H95 mm -Weight: 1.1 kg

Bezel, setting stick, lynette -Max. passage: Ø 160 mm -Peak height: 220 mm -Edition: Gray cast iron -technical drawing included with the photos -Dimensions: 450/100/H500 mm -Weight: 33 kg

Stainless steel couplings, pipe coupling -Type: GRIP E W5 -Inner diameter: 114.3 mm -From: 113.0 to: 115.5 mm -Pressure: 16 bar -Price: per piece -Number: 14 available -Dimensions: 160/142/H100 mm -Weight: 1.6 kg/piece

radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.4 kW -Speed: 1276 rpm -Total pressure: 260 Pa -Volume flow rate: 3200 m³/h -Inlet connection: Ø 400 mm -Outlet connection: 360/470 mm -Dimensions: 1130/560/H780 mm -Weight: 106 kg

Three-phase motor, electric motor -Power: 1.5kw -Speed: 940 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 54 -Number: 1x available -Dimensions: 400/270/H220 mm -Weight: 24kg

Frequency converter, frequency converter, drive inverter, controller, variable speed drive -Siemens: Sinamics S120 Single Motor Module 6SL3120-1TE21-0AA3 -Max. Power kW -Input: DC 600V -Output: 3AC 400V 9A -Quantity: 1 piece available -Dimensions: 500/50/H270 mm -Weight: 5.0kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 78 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Brake -Dimensions: 540/220/H230 mm -Weight: 22 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 18 rpm -Power: 0.37kw -Construction: B5 angle -Diameter shaft: 35 mm -Protection class: IP 54 -Number: 1x motor available -Dimensions: 490/261/H300 mm -Weight: 38kg

centrifugal pump, water pump -Flow rate: 5-42 m³/h -Motor power: 0.75 kW -Speed: 1410 rpm -Inlet pipe connection: DN50 -Pipe connection outlet: DN50 - Quantity: 1 pieces -Dimensions: 570/230/H310 mm -Weight: 40kg

Tailstock, counter bearing for dividing head, dividing head -Peak height: 135 mm -Height: adjustable -Recording: MK2 -Drawing with the photos -Dimensions: 220/120/H140 mm -Weight: 11.4 kg

proximity switch -Manufacturer: Festo -Product Type: 150 857 U613 -Number: 3x switches available -Price/Sale: complete -Weight: 0.01 kg/piece

Transformer, transformer, converter, three-phase autotransformer -the transformers come from a UV paint drying facility -Input: 400 V -Output: -(technical data see photos) -Number: 8x transformer available -Price: per piece -Dimensions: 160/180/H195 mm -Weight: 14 kg/piece

Transformer, converter, inverter, three-phase autotransformer -The transformers come from a UV paint drying process -Input: 380 V -Exit: -Technical specifications: see photos -Number: 6x transformer available -Price: per piece -Dimensions: 160/180/H195 mm -Weight: 14 kg/piece

table length: 3000 mm table width: 1500 mm burner heads: 1 Control: CNC workpiece weight: 1500 kg traversing speed: 200 m/min total power requirement: 55 kW dimensions of the machine ca.: 10050 x 4920 x 2200 mm CUTTING CAPACITY: STRUCTURAL STEEL 25 mm STAINLESS STEEL 15 mm ALUMINUM 12mm BRASS 8mm COPPER 8mm MACHINE AXES: 4 axes [X, Y, Z, U ] CUTTING HEAD: Precitec ProCutter CAD/CAM SOFTWARE: LANTEK EXPERT CUT 4 servo motors for all axial movements CNC CONTROL PANEL 15 5” touch screen IPG laser sources and coolers integrated Precitec Procutter cutting head system AIR FILTER (compressed air filter) CONVEYOR BELT under cutting area Closed housing and specially coated filter protection windows LOADING / DISCHARGING SYSTEM PROPORTIONAL GAS AND PIPE SYSTEM The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transformer, converter, inverter, three-phase autotransformer -The transformers come from a UV paint drying process. -Input: 400 V -Exit: -Technical data: see photos -Number: 14x transformer available -Price: per piece -Dimensions: 310/200/H415 mm -Weight: 60 kg/piece

Transport rollers, wheels, casters, carrying rollers -comes from a grandstand complex -Roller diameter: 125 mm -Number: 92 sets of rolls available -Price: per piece -Dimensions: 355/135/H50 mm -Weight: 2 kg -Unfortunately, no information is available regarding load-bearing capacity.

Transport rollers, wheels, rollers, support rollers -comes from a grandstand system -Rollers diameter: 125 mm -Number: 108 sets of rolls available -Price: per piece -Dimensions: 505/135/H50 mm -Own weight: 2 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 41 rpm -Power: 0.12 kW -Construction: B3 angle -Diameter shaft: 9 mm -Protection class: IP 21 -Dimensions: 210/150/H135 mm -Weight: 2 kg

COLCHESTER TORNADO 110 CNC turning center was built in England in 1998. The machine, designed for precision machining of workpieces with a maximum diameter of 420 mm, features a fully illuminated work space that includes among others a 12-position turret and an extremely powerful spindle. The inclined bed by 60° ensures excellent stability of the process, during even the most intense challenges. On top of this, the intuitive GE FANUC Series 21i-T CNC control allows advanced machining programmes to be created in just a few steps. The TORNADO 110 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 110 metal lathe - CNC controller: GE FANUC Series 21i-T - feed in the X/Z axis: 310/416 mm - rapid traverse in the X/Z axis: 15/20 m/min - load on the X/Z axis: 2.51/3.77 kN - turning diameter over bed: 420 mm - turning diameter over slide: 280 mm - maximum tur ...

Heidenhain TNC 426 Table 1600 x 2000 mm Max. load 12.500 kg Spindle diameter 130 mm Taper ISO 50 Cross travel (X) 3,500 mm Vertical travel headstock (Y) 1,600 mm Longitudinal travel (Z) 1,250 mm Horizontal spindle travel (W) 850 mm RPM 4 – 1,120 kW 45 Volts 380 Cycles 50 Including: Facing head Ø 720 mm Facing head slide travel 240 mm Machine weight 31,1 ton

Force measuring device, force measuring device, calibration, force measuring technology, load cell -Manufacturer: Johann Rein -Type: 1Mp -Dimensions: 190/290/H130 mm -Weight: 4.5 kg