1 mw gas used for sale

Orbital sander Comec LC/15AV Element diameter min/max 10-100mm 4kw main motor 2×0.25kw feed motor Sanding belt dimensions 1220x70mm CE Certified

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -Intermediate plate: for hydraulic press, eccentric press, injection molding machine -Width: 1750 mm -Length: 1750 mm -Height: 80 mm -milled from all sides -Number: 2x plates available -Price: per piece -Weight: 2000 kg

Used fluid bed dryer mady by Bühler model OTWG-160, new 1996. Technical data: - Weight 1050 kg - Content m³: 2.7 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.

150 m pallet rack Nedcon New goods, see pictures! A top shelving system from the major manufacturer NEDCON – this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 6 m Depth 110 cm, blue Beam length 2.7 m orange Rack with ballast /compartment 3050 kg Negotiation price: € 18.990,-- net from stock Offer consists of: + 55 pcs. frame pre-assembled, depth 110 cm, height 6 m +216 pcs. beam, length 2.7 m, 3050 kg ballast/compartment +432 pcs. Suspension locks +220 pcs Concrete Anchor Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Field load 12 tons, higher bay loads possible on request. Carrier orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock.  ...

Recon Part number: 526 050 00 01 X52605100017 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 195 mm -Kurzkegek 5 -Cone mount: Ø 48 mm -Hole circle diameter: Ø 105 mm -interchangeable jaws -Weight: 18 kg

Front broom, front sweeper, roller brush, broom -suitable for: Kramer Tremo, Multicar, Iseki, Hako and other tractors -was in use: at Berlin Airport -PTO drive: -hydraulic: swiveling -Admission: three point -hydraulic: swiveling -Broom width: 2000 mm -Dimensions: 2100/1070/H1060 mm -Own weight: 310 kg

Control amplifier, servo motor control -MDC 9.20B -10V/1500 -Number: 3x controls available -Price: per piece -Dimensions: 310/140/H265 mm -Weight: 6.8 kg/piece

x-travel: 1600 mm y-travel: 900 mm z-travel: 800 mm Control: Heidenhein iTNC table-size: 1700x850 mm taper ISO: ISO 40 turning speeds: 10000 U/min workpiece: Random 30 pos. table weight: 2000 Kg rapid traverse:: 20 m/min Internal cooling system: 20 bar total power requirement: 18 kW weight of the machine ca.: 18600 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control amplifier, servo motor control, programming module -MDC 9.20B -10V/1500 -Number: 1x controller available -Price: per piece -Dimensions: 310/140/H265 mm -Weight: 6.8 kg/piece

Lens, lenses -Number: 6x lenses -packed: individually -Dimensions: 110/110/H35 mm -Price: complete for all 6 pieces -is only sold complete -Weight: 0.3 kg/piece

PLC control -Type: Simatic S5 6ES5430-4UA14 -Simatic DP, decentralized peripheral DP/DP-coupler Coupling module for connecting two PROFIBUS-DP networks, redundant power pricing -Number: 21x available -Price: per package -Weight: 0.3 kg

Precision bending beam for glass cutting table, glass cutting table, glass cutting machine -Manufacturer: INNOLAS S100-5N -Type: NJ Y123/101 -Weight: 0.1 kg

INDRAMAT Permanent Magnet Three-phase Servo Motor

INDRAMAT Permanent Magnet Three-phase Servo Motor

INDRAMAT Permanent Magnet Three-phase Servo Motor

Heinzmann Actuator StG 30-10 Serial No. 1108034154-30

Multiple limit switches, buttons, limit switches -Type: BNS519-B5D16-100-1 -Price: per piece -Number: 2x available -Dimensions: 170/120/H107 mm -Weight: 2.9 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Power: 10 kW -Max. speed: 6000 rpm -Shaft: Ø 42 mm -Protection class: IP 23 -Number: 1x motor available -Dimensions: 880/380/H320 mm -Weight: 136 kg

Chiller ENR160 130KW at 7/12°C, internal P3 pump, internal 390l buffer tank, system is perfectly suited for process applications as it is equipped with a shell-and-tube evaporator and a buffer as well as an internal P3 pump. low GWP refrigerant R454B, winter package, RS485,

We offer for sale 20 pieces of spark plugs Jenbacher Part No. 1214569

Bezel, stick, lynette -Max. Passage: Ø 102 mm -Tip height: 144 mm -Edition: gray cast iron -Technical drawing: in the photos -Dimensions: 270/70/H295 mm -Weight: 5.6 kg

Circuit breakers, motor protection switches, star-delta switches, reversing switches -Type: 3RV1421-1GA10 -Number: 17x switches available -Price: per piece -Weight: 0.4 kg

Contactor, semiconductor contactor -Type: 3RT1054-1AP36 -Type: 3RH1921-1DA11 -Power: max. 132 kW/400V/AC -3 -Number: 3x shooters available -Price: per piece -Dimensions: 210/120/H175 mm -Weight: 3.6 kg

Fabr: Kuper Type: FW Machine No: 0371 Year: 1966 Stand projection: 1150 mm Throughput speed: approx. 10 - 30 m min. Propulsion: Brake motor 0.55 kW 380 V, optionally 220 V three-phase current Total connected load: 1.8 kW Heating: 7 V 120 W Weight: 630 kg Space requirement: 2300 / 800 mm Crate dimensions: 2450 / 1450 / 900 mm Ship space: 3.2 m³

Contactor, semiconductor contactor, contactor, power contactor -Type: 3RT1035-1BB40 -Auxiliary contact type: 3RH1921-1FA22 -Max. Power: 18.5 kW/400 V/AC-3 -Number: 1x contactors available -Price: per piece -Weight: 1.5 kg/piece

PLC control -Type: Simatic S7 6ES7 321-1BL00-OAAO -Number: 39 x available -Price: per piece -Weight: 0.4 kg

PLC control -Type: Simatic S7-300 -Digital output: SM 322, -Potential green, 32DA, DC24V, 0.5A, -1 X 40 PIN., -Total current: 4A/group -Number: 13x available -Price: per piece -Weight: 0.4 kg

PLC control, PLC subrack -Type: Simatic S5 6ES5 701-1LA12 -Number: 1x available -Price: per package -Weight: 2.7 kg

Used bread line GLIMEK -In good bakery condition- - Dough divider GLIEMEK SD-180 with XL funnel - Intermediate oven IPP840-008 - Long caster GLIMEK M0671 - Rounder - Capacity: approx. 1,500 pcs./h The plant has only been running for 10 years and only in the summer season. Out of service since 2017. Viewing and test run are possible by arrangement.

PLC control -Type: Simatic 6ES5 240-1AA21 -Number: 1x available -Price: per package -Weight: 0.5 kg

PLC control -Type: CP343 6GK7343-1CX21-0XE0 -Communication processor CP343-1 for connecting Simatic S7-300 to Ind. Ethernet -Number: 15x available -Price: per package -Weight: 0.4 kg

Rack trolleys, paint drying trolleys, compartment trolleys, transport trolleys, shelf trolleys -Total length: 1190 mm -Total depth: 720 mm -Total height: 1800 mm -Weight: 66 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1510 mm -Length: 1510 mm -Height: 695 mm -Surface: good -Holes: Ø 50 mm -Sheet thickness: 125 mm -bench vice -Transport dimensions: 1540/1770/H1030 mm -Weight: 1650 kg

Key data: 1500 kN, 141 g/PS, 35 mm

Arburg 520S-1500-400 (217) General information SKU: (217) Availability: In stock Year of construction: 2008 Brand: Arburg Specifications Spray weight: 141 g Clamping force: 1,500 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 688 x 688 mm Tool installation height min.: 250 mm Control: Selogica Language: English,German Power: 33.9 kW Hours: 45343 h Weight: 6490 kg Dimensions: 4.9 x 1.7 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes C90fn8e

Control Heidenhain TNC 620 Travel X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 min-1, Tool magazine for 30 Wkz., SK 40, Cooling by the spindle 12 bar, Conveyor

Sheet metal shelf, screw shelf, storage shelf, screw shelf -Execution: stable -Dimensions: 620/1420/H1400 mm -Own weight: 260 kg

Clamping plate, welding table, welding table, straightening plate -Width: 710 mm -Length: 1010 mm -Height: 840 mm -Surface: milled -partially with threaded holes -Sheet thickness: 65 mm -Massive -Weight: 410 kg

HIWIN HS22XD2YM2-1250-0550NNR-X 2-axis system X-Y X-axis: Profile width: 60mm Feed Constant: 155mm Timing Belt Axis Stroke/Overall Length: 1250mm/1775mm Slide: Type L, length 330mm Drive: prepared for gearbox g700-P44(Lenze) Wheelbase: 676mm-incl. Spacing Profiles Synchronous shaft: DM: 50mm - with couplings Y-axis: Profile width: 60mm Feed Constant: 155mm Timing Belt Axis Stroke/Overall Length: 550mm/976mm Slide: Type M, length 230mm Drive: prepared for gearbox g700-P44(Lenze) The gantry system is unused and has not yet been unpacked. Year of construction 07.2023

Glycol cooler, water cooler, water evaporator, Küba SGB 132, 70 liter capacity, two fans 710mm diameter, 920 red/min. 2.2 Kw. From a Fruit Warehouse, CA Warehouse In very good condition and fully functional. Fan very robust, south electric, 2.2Kw.

Cross-cut saw, optimisation saw Make: Reinhardt Model: Quickstop QS 160 P Year of construction: 1992

Clamping plate, welding table, welding table, straightening plate -Width: 745 mm -Length: 1100 mm -Height: 845 mm -partly with threaded holes -Plate thickness: 15 mm -with supporting ribs -Weight: 140 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1000 mm -Length: 1000 mm -Height: 780 mm -Surface: milled -partly with threaded holes -Plate thickness: 25 mm -with supporting ribs -Weight: 214 kg

Platform trolleys, transport trolleys, heavy trucks, table trolleys, assembly trolleys -Angled iron frame -Push-in sleeves at each corner -Heavy load transport trolley -Load capacity: 200 kg -Number: 20 pieces available -Price: per piece -Dimensions: 715/1210/H325 mm -Weight 34 kg / piece

table load: 110 Kg table load capacity: 55 kg. vertikal table diameter: 250 mm hollow spindle diameter: 65 mm chucking diameter: 200 mm swivelling range: 0 / 30 / 60 / 90 Grad turning speeds: 0 - 8 stufenlos U/min total power requirement: 0,15 KW weight of the machine ca.: 25 Kg dimensions of the machine ca.: 0,5 x 0,53 x 0,6 m Welding turntable with - large passage 60mm - Footswitch - tilt/swivel by hand - Speed infinitely adjustable - 250 amp welding current transmission - Bore in faceplate 60mm. Demonstration machine documentation only in English. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stainless steel grating mill

Manufacturer: INOTEC Type: 175 for engines 75 D , 90 D Lug ring long continuous groove for Mikrocutter INOTEC 175 - NEW Product Code : V500663-1 / 175-0020019 Position 21 of the drawing Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone 0048/33 812 58 60 fax. 0048/33 812 58 36

Transport box, wooden box, assembly box -Dimensions inside: 590/1490/H500 mm -External dimensions: 730/1620/H680 mm -Weight: 74 kg

SECOND-HAND FILTERING PLANT CM MOD. FST 180M - 180 bags mm 200x2500 - static filter - main motor 40 Kw - year 2008 - capacity 30.000 mc/h - CE rules

Lippert belt conveyor GF 12730-750-600 RA2259 Technical data: Conveyor length (NL): 12730 mm Frame width (NB): approx. 750 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, R37 DRE80M4/TH/Z Electrical data: 50Hz V380-500, kW 0.75 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 12730 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie  ...