1 mw gas used for sale

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 120 x 40 mm Truss Type: TRV1-290-124-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,100 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the pla ...

weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 5500 mm high: 2385 mm weight of the machine ca.: 1,2 t dimensions: 1,72 x 0,8 x 2,4 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 120 x 50 mm Truss Type: TRV1-290-125-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,200 kg, with the same weight Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on th ...

USED TETRA PAK A3 FLEX 1000ML PRISMA FILLING LINE FOR SALE Item #: Usm-193 Category Tetra Pak A3 CF/Flex A3 Flex 250ml Slim and 1000ml Prisma Filling Line For Sale A3 Flex 250ml Slim filling machine with 1000ml Prisma Volume change kit, Version 100v, Speed 7000 PPH Straw applicator TSA 21 Cap applicator 45 for stream cap Tetra Pak packer TCBP 70 Tetra Film wrapper 67 eady ride and conveyors paper trolly Condition: Good

Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 190 mm -Height: 195 mm -Bore center: Ø 57/40 mm -Dimensions: 310/220/H195 mm -Weight: 28 kg

Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 190 mm -Height: 195 mm -Bore center: Ø 57 mm -Dimensions: 355/200/H245 mm -Weight: 42 kg

Offer 23443 Specifications: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30° - Cutting gap adjustment by hand - Projection 200 mm - Man.- Back gauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirements incl. back gauge -ca. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg

Kemper Spiral Kneader Type: SP 125 A Specifications: 2 automatic timer switch-on and switch-off 2 speeds slow and fast with 3 stainless steel boilers Stainless Steel Boiler and Spiral with flour dust cover square head Boiler capacity approx. 250 litres Machine has been overhauled and repainted Electronics new All bearings new All straps new New friction wheel Wear parts all new Engine mounts all new Push button new Rollis new Hydraulic oil new completely repainted

Double hydraulic pump, oil pump, gear pump -Engine power: 11 kW at 1440 rpm -Pump: Ostrta A 16 -Nominal pressure: 160 bar -Flow rate: 16 l/min -Protection class: IP 44 -Dimensions: 670/290/H335 mm -Weight: 99 kg

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 140 x 40 mm Truss Type: TRV1-290-144-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,750 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the plac ...

BOBST SP 102 - SE year 1992 A Die Cutting machine of size 72 x 102 cm Equipped with : Max. sheet 720 x 1020 mm, Min. sheet format 350 x 400 mm Pressing force 2.5 MN (250 tones), NON Strop feeder and delivery Max. speed 7500 S/Hour, Quick lock system, Suction head feeder, Cutting section Stripping section. IN VERY Good Condition ! (No Air Compressor, machine was plug on a Air Central)

Alcolor Vario continuous dampening Autoplate (semi automatic plate loader) Ink unit temperature control (Technotrans Beta C) Cooling and recirculation Impression-cylinder washing device - automatic Ink-roller washing device - automatic Blanket washing device - automatic Non-stop feeder Powder sprayer (WEKO AP 110) Preset Plus feeder Prinect Press Center AirStar Pro - Central air supply cabinet Prinect Easy Control - Color Measurement

Blume roller conveyor continuous weighing scale 1880-910-600 RA2046 Make: Blume Roller width (RB): 600 mm, Steel rolls Nominal/outer width (NB): 910 mm length: 1880 mm Rolls diameter: 50 mm Roller distance 80 mm Overall height: 900 mm 3x 24V Interroll drum motors Conveyor speed: freely adjustable with frequency converter between 0.22 and 0.65 m/s maximal load: 220 kg Electronics: 4x load cell: Interface, MB-150-38 ML-1106B Scope of delivery: with supports, USB converter Optionally available: Side guides on one-sided or both sides Other measuring device e.g. Metler Toledo IND400 Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2012 Electric data: 24V Interroll, 220-240 condition: very good (used) Conveying length in mm: 1880 Nominal / outside width in mm: 910 Roll width in mm: 600 Roll division in mm: 80 Driven: YES scope of ...

Intensive kneader, Stephan, type TK 160

Gear motor, electric motor, electric gear motor -Speed: 20 rpm -Power: 0.25 kW -Design: B5 -Shaft: Ø 25 x 60 mm -Bolt circle: 130 mm -Recess: 110 mm -Protection class: IP 55 -Dimensions: 400/160/H220 mm -Weight: 17 kg

Used candle filter - sanitary made by Cerfiltr type FHC - STC - 12SF30T80. New 2021. The filter is used for water sterilisation. Plus a set of cartridges (extra charge). Little used.

Several used old-type tanks from the 80s, capacity approximately 10.000-20.000 liters

Used pipetting robot Tecan EVO 150 with Tecan dongle and CDs and accessories .

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2900 rpm -Shaft: Ø 38 x 60 mm -Construction: B5 -Protection class: IP 54 -Number: 3x available -Price: per piece -Dimensions: 450/310/H257 mm -Weight: 55 kg

Nakamura WTS 150 Y2 Bar Lathe :::SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 16i - T Main Spindle Nose: ASA 5 Main spindle power: 7.5Kw Main spindle bar clearance: 42mm Turning diameter: 310mm Turning Length: 255mm Main spindle speed: 6000 Number of Tool Turrets: 3 Number of first turret tool slots: 12 Number of first turret motors: 12 First Turret X-Axis Travel: 207.5mm First Turret Y-Axis Travel: +-30mm First Turret Z-Axis Travel: 300mm Number of second turret tool slots: 12 Number of second turret motors: 12 Second Turret X-Axis Travel: 207.5mm Second Turret Y-Axis Travel: +- 30mm Second Turret Z-Axis Travel: 300mm Number of third turret tool slots: 12 Number of third turret motors: 12 Third Turret X-Axis Travel: 207.5mm Third Turret Z-Axis Travel: 800mm Rapid feeds for linear axes X Y Z: 40m/min High refr ...

1 SULZER VAUPEL label rapier loom type G6500 S150 N8 J and EWM 80-135E, year 2006, weaving width 126 cm, STÄUBLI electronic jacquard type DX110, STÄUBLI JC6 controller, VAUPEL control type MCD-3, machine supplied with 8 IRO Stella G2 weft feeders

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 2870 rpm -Shaft: Ø 38 x 70 mm -Construction: B5 -Price: per piece -Number: 2x available -Dimensions: 455/326/H250 mm -Weight: 56 kg

1 SULZER VAUPEL label rapier loom type G6500 S190 N8 J and EWM 80-175E, year 2008, weaving width 168 cm, BONAS electronic jacquard type ZL 2L-24, 2304 hooks, BONAS Series 800 controller, VAUPEL control type MCD-3, machine supplied with 8 IRO Stella G2 weft feeders

Turntable Bausch + Ströbele further information on request

Key data: 6 mm

Type : K 30 – 120 Specifications: Sheet thickness 6 mm at 400 N/mm² 4 mm at 600 N/mm² Cutting length 200 mm Angle adjustment from 30 - 120 ° Drive power approx. 4 KW

The scope of delivery includes: 01x Locking bracket, used Material colour: sendzimir galvanized Total length: approx. 1,640 mm Leg "A" approx. 39 mm (flanged) Leg "W" approx. 63 mm Bearing surface: approx. 60 mm Leg "C" approx. 13 mm Material thickness: approx. 1.50 mm Weight / piece: approx. 2,330 kg General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP55 -Dimensions: 450/295/H250 mm -Weight: 43 kg

Year of construction : 1995 Specifications: Cutting capacity 37 kG/ mm" 5 mm Cutting capacity 70 kG/mm" 3 mm Cutting speed 35 m/min Blank diameter 180 – 1200 / 1600 mm

Three-phase motor, electric motor -Motor from Zapfenschlager Make: Harbs Type: ZSMV/2 -including: saw blade holder -Power: 4 kW -Speed: 2880 rpm -Construction: B3 -Protection class: IP 54 -Dimensions: 470/216/H165 mm -Weight: 36 kg

geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Power: 0.5 kW -Dimensions: 400/270/H160 mm -Weight: 22 kg

Promess KA-EMF20/150 Servo Press 20 KN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo Press KN: 20 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 62601 More servo presses new and used - you can find them in our shop! International shipping costs on request!

Transnorm Rising falling Incline with arch belt conveyor GF 1115+800-700-600 RA2228 Technical data: Conveyor length (NL): 1915 mm ( 1115 mm incline + 800 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DRS71M4/MM05 Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 1915 ( 1115 + 800 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eur ...

Vacuum cleaner motor, suction turbine, wet vacuum cleaner -from: scrubbing machine make Gansow -Number: 17x available -Price: per piece -Dimensions: Ø 145/H210 mm -Weight: 2.7 kg

Vacuum cleaner motor, suction turbine, wet vacuum cleaner -Manufacturer: Lamb Electric, suction motor from Gansow scrubber-dryer -Voltage: 24 V -Quantity: 29x available -Price: per piece -Dimensions: Ø 145/H175 mm -Weight: 2.3 kg/pc.

Key data: 1500 kN, 487 g/PS

Arburg 520A-1500-800 (207) General information Item number: 207 Availability: In stock Year of construction: 2007 Brand: Arburg Specifications Spray weight: 487 g Clamping force: 1,500 kN Stand: Used Screw diameter: 60 mm Spray pressure: 1390 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 700 x 700 mm Control: Selogica Power: 74 kW Operating hours: 63,600 h Weight: 7300 kg Dimensions: 6 m x 2.4 m Funnel: No

Workshop lamp, lamp, hall lamp, hall lighting, pendant lamp, industrial lamp -Power: 165 watts -Number: 1x lamp available -Dimensions: 540/540/H710 mm -Weight: 9.7kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame made of: galvanized sheet steel -Dimensions: 1575/1275/H175 mm -Weight: 50 kg

This cooling tank from Primac is in machine storage at Plastima Used Machinery. The Cooling Tank is from 1994 and is in great condition. - Brand: Primac - Model: CV.2C. 125/6 - Pipe diameter max: 125 mm - Cooling length: 6000 mm - Year of construction: 1994

MEMBRANE SKINNERTOWNSEND, MODEL: 1520 Technical description: Serial number: 140 Year: 1998 Working width: 380 mm Power supply: 220-240 V/50-60 Hz Dimensions: 700 x 530 x 990 mm

Clamping plate with threaded hole, plate field, welding table, welding table, pallet changer, face plate -Diameter: 1650mm -Thickness: 100 mm -Recess: 730 mm -Thickness: 90 mm -Plate: is solid -Quantity: 1 piece available -Price per piece -Dimensions: 1650/1650/H190 mm -Weight: 1530 kg

Thermoplastic polyurethane elastomers, pressure hose, air hose, plastic hose -Hose: PA/TPU/D inner diameter = 14 -Inner diameter: 14 mm -Outer diameter: 16 mm -Wall thickness: 1 mm -Length: 98 m -Quantity: 1 roll available -Dimensions: 800/800/H535 mm -Weight: 36 kg

Kenplaat mixing tank Stainless 1500l mixing tank, top mounted motor, level detection, side bottom discharge

Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Power: -Input: 3x 400 V - 50/60 Hz -Output: Hertz 0-150 Hz max. 4 kVA -Dimensions: 400/100/H265 mm -Weight: 7.6 kg

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter -Manufacturer: INFRANOR -Type: SMD 101/120 -Servo drive -Number: 1x control cards available -Price: per piece -Dimensions: Servodrives -Weight: 0.4 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 1.5 kW -Output: 3x 230 V -Output frequency: 0-120 Hz -Number: 1x converter available -Price: per piece -Dimensions: 205/250/H190 mm -Weight: 6 kg/piece

Wet spent grain silo, Fabr. VetterTec, for 10 m³ net capacity, made of mild steel St 37-2, outlet hopper inclination 60°, with Discharge screw 3.0 m long, with control cabinet and remote counting device, standing on supporting structure, with Vertical ladder, Ø: 2,500 mm, cyl. Height approx. 2,000 mm

Filling machine for PFS and Cartridges in nest; for testing and small batches. Dimensions: 1,500ｘ 1,135ｘ 2,000 mm Max. Output: 4.800/hr Filling volume: 0.5 - 50 ml Supported package: 20/30/42/64/100/160 nest Filling system: Rotary piston pump, peristaltic pump, time pressure, or in combination. DFVN 1000 series is the smallest filling and stoppering machine by Groninger. Designed as a filling and closing machine for presterilized disposable syringes in nest for laboratories, test series and small batches. This semi-automated stoppering and filling machine offers processes identical to those of a high-output system. The machine supports manual nest handling under laminar flow. Clear separation between the manual handling section and the fully automatic production section.

Fully automatic flatbed die-cutter, non-stop feeder, automatic introduction with large vacuum plate, double sheet cleaning station, platinum unit, turn die cutting frame, (batch delivery) non-stop delivery with belt, cutting force 300 TON, 4.500 speed/h, working with corrugated cardboard of thickness max. 9.5 mm, min. 0.8mm, The Machine Can Cut On Micro-corrugated Cardboard, Jobs Quick Change Device, Working With Compact Stock Of Thickness 1 mm And Beyond, Cutting Force 350 TON, Format: Max. 1055x1575mm, Min. 400x600mm, Standard Accessories

Rheon Model KN100 Cornucopia Encruster. Maximum speed approx. 60 pieces per minute, depending on the product. Weight capacity from 10 - 90 grams. (2) 11.5" x 8" x 7" stainless steel feed hoppers, each with (2) 2.5" diameter feed screws. Approx. 5 inches wide discharge conveyor. Digital touch controls. Compact forming, filling and portioning machine Connection 400V, 16A-CEE plug Used machine from bakery

Hydraulic unit, hydraulic pump, hydraulic pump, hydraulic pump -for: Harbs ZSMV/2 pivot beater -Max. Pressure: 70 bars -Motor: 1.5 kW 1405 rpm -Number: 1x available -Dimensions: 465/260/H520 mm -Weight: 58kg