1 mw gas used for sale

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Martonair type: 167-05 5000-1 -Piston: Ø 63 mm -Piston rod: Ø 20 mm -Max. Pressure: 16 bar -Stroke: 1150 mm -Dimensions: 75/75/1340 mm -Weight: 9.6 kg

faceplate diameter: 1400 mm turning diameter over slide rest: 1400 mm centre distance: 1500 mm turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 250 mm stroke: 200 mm adjustment of press crosshead: 200 mm stroke speed - idle stroke downwards: 105 mm/sec stroke speed - idle stroke upwards: 180 mm/sec stroke speed - under load: 9,5 mm/sec table width: 200 mm table height over floor: 900 mm dayligth: 280 - 480 mm back stop - adjustable: 3 - 729 mm control: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kW weight of the machine ca.: 10 t dimensions of machine L x W x H: 3,70 x 2,45 x 2,80 m Accessories: programmable back gauge, table extensions, various upper and lower dies segments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Syspal fully enclose tote bin tipper Fully working 16a 3 phase plug 2m tip height All failsafes

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Mecman type: 167-05 5000-1 -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Stroke: 370 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 63/63/600 mm -Weight: 2.75 kg

Offer 22564 Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between uprights 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg - With: - Two-hand control panel with foot switch

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -DSG type: 1600/100/600 -Piston: Ø 100 mm -Piston rod: Ø 32 mm -Stroke: 587 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 115/115/880 mm -Weight: 13.6 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -DSG type: 167/100/600 -Piston: Ø 100 mm -Piston rod: Ø 32 mm -Stroke: 600 mm -Number: 1x cylinders available -Price: per piece -Dimensions: 115/115/885 mm -Weight: 12.45 kg

Grinding wheels, grinding bodies -Outer diameter: 555mm -Width: 110mm -Inner diameter: 203mm -T1707801 -Weight: 50.5kg

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outside/Inside: Ø 250/168.3 mm -Height: 58 mm -Number: 2x pillows available -Price: per piece -Weight: 4.2 kg/piece

58 Mw MAN 18V48/60TS power plant 50 Hz 3 x Man 18V48/60TS generators together with auxilary equipments Approx 4000 Working hours each 58 Megawatts total power 19305kw each at 500 RPM and 50 Hz Engines year of build 2014 with ABB AMG1600UU12 DSE Alternators Alternators year of build 2015

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outside/Inside: Ø 125/60.3 mm -Height: 58 mm -Number: 12x pillows available -Price: per piece -Weight: 1.3 kg/piece

Automatic Groove and Grip Hole Eyelet Machine Hang Type 115-20 incl. Conveyor Belt and Ceiling Magazine Built in 1988 OKU-Automatic eyelet sorter, Conveyor belt Length 2,500, width 500 mm, Folding unit HANG, Benefit Investors Machine is in good condition

IMAC Plasma Cutter Working range 3000x1500 Workable thickness 15/20 mm. complete with vacuum cleaner Updated Software CD

Control unit, control panel, control panel, control unit, keyboard, screen, control -Control comes: from a machining center BJM type ALBZ-145 -Manufacturer: BJM Beckhoff -Dimensions: 603/418/H100 mm -Weight: 16.2 kg

Key data: 1180 KW, 1910 1/min

TO WHOM IT MAY CONCERN WE VE MTU ENGINE 16V 396 TB 34D EX GEN SET ENGINE AT OUR STOCK. ENGINE WAS USED EMERGENCY GENSET ENGINE . IT WAS USED ONLY 267HRS SINCE NEW ... ENGINE IN VERY GOOD CONDATION . PLS FIND ENGINE DETAILS ON BELOW TYPE : 16V 396 TB 34D ENGINE NO. : 5591283 YOB. : 1993 POWER. : 1880 KW .RPM. : 1910 / 1500 1/min ENGINE AT OUR WORK SHOP READY TO SHIPMENT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US .

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: approx. Ø 50 mm -Piston rod: Ø 35 mm -Threads on piston rod: 2x M 30 -Stroke: 100 mm -Dimensions: 445/140/H90 mm -Weight: 9.6 kg

Control Rexroth System 200 BTV30 Circulation diameter over bed: 160 mm Circulation diameter over face carriage 250 mm Chuck diameter 160 mm Turning length 300 mm Spindle speed 8000 min-1 12-speed revolver with attached Competition. Workpiece conveyor belt Conveyor Various tool holders

A complete unit is offered.

4-column punching tool, parting tool, punching tool, punch, punching die, punching punch -4 pillars: punching tool -Dimensions: 395/195/H240 mm -Weight: 54 kg

Shelf trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving -Width: 1700 mm -Depth: 760 mm -Height: 1780 mm -Storage shelves: 4 -Price: per piece -Number: 1 pieces -Weight: 84 kg/piece

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder for pedestrian stacker make: OMG type 214EA -Piston: Ø 32 mm -Piston rod: Ø 20 mm -Stroke: 150 mm -Max. Pressure: 300 bar -Dimensions: Ø 92/390 mm -Weight: 5.2 kg

Machining center in continuous flow Usable width 1300 mm Working Dimensions X:4200 mm / Y: 1300mm / Z: 60 mm HSD Boring Unit 10 Vertical Drill - 3x2 Horizontal - 1Saw Blade) Working Speeds X: 100m/min / Y: 100m/min - Z: 20m/min 5.5 Kw I 7.50 HP ISO 30 HSD Spindle Motor Panel Handling with Double Clamping System (Independent Servo Control) Double Sided Air Flotation Working Table AES WOP CAD/CAM Program Piece Verification System with Laser Weight (Approx.) 3.500 kg

Stick electrodes 3.2 x 350 -Type: Phoenix 120 K -Price: per package -Number: 4 packages available -Weight per package: 4.3 kg

Electric motor, lighting current motor -Voltage: 220 volts -Power: 0.37 kW -Speed: 2860 rpm -Shaft: Ø 11 mm -Design: B5 -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: 230/210/H195 mm -Weight: 7.4 kg/piece

The WELGER SB 100 is a German baler for waste paper, foil and other materials and waste. Length of machine, without bale chute 3.380mm Width 1,120 mm Height 1,760 mm Table height 990 mm Table width 600 mm Press force 4.3 tons Time per working stroke 6.7 sec Capacity/throughput 0.75 t/h Bhm8ggch Bale size 600mm w x 375mm h x length 600-1200mm Binder Plastic Yarn Power supply: 400 V/5.5 kW Weight: 40-60 kg Machine weight: 1000 kg ATTENTION- BONUS! A second such machine for spare parts is EXTRA included.

Internal quick probe, length measuring device, internal precision measuring device, internal measuring device, internal measuring probe, micrometer screw -One revolution of the drum corresponds to: 0.5 mm -Interior measuring device -Measuring range: approx. 800 - 1500 mm -Weight: 5 kg

• For brochures, leaflets • Horizontal extension arm type 150, length 245 mm • Leaflet size: length max. 55 mm, width 50-105 mm • Speed max. 115/min, max. 20,000 leaflets/h • Adjustable amount of leaflets to be dispensed • Control unit VS-2002 right • Double-sheet detector • Fill level control magazine • Control via 18-pole plug-in coupling • Electr. connection 90-240V/50-60Hz

Key data: 8 mm, 1

Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...

• Load capacity 125 kg • Drum holder for drums appr. diam. 430 mm, drum weight max. 100 kg • Lifting height of drum lower edge above floor max. appr. 1,400 mm • Two-speed remote control (50 % and 100 %) • Central brake bar • Mobile • Electrically rechargeable with battery charger 230V/50Hz

4000 x 2000mm 10KW Fiber laser / 10,000w Fiber laser

Drawer slides, telescopic slides, drawer pull-outs, heavy-duty pull-outs, drawer slides, drawer pull-outs, telescopic slides, pull-out slides -Retracted length: 695 mm -Length extended: 1227 mm -Price: per pair (left right) -Number: 5x pairs available -Weight: 1.8 kg

Three-jaw chuck, three-jaw lathe chuck -lining size: Ø 190 mm -Rezess: Ø 155 mm -Passage: Ø 54 mm -Weight: 11 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 100 mm -Piston rod: Ø 40 mm -Diameter eyes: 35 mm -Stroke: 195 mm -Dimensions: 530/130/H120 mm -Weight: 21.7 kg

Extrusion recycling line as good as new EREMA type "Vacurema" for processing rPET, 700 operating hours, Year of construction 2020, Capacity 600 kg/h, Delivery time: Immediately. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Used HAPPLE control screen sieve machine in good condition Screen basket 400 x 1000 mm n=270 rpm, with spare sieving basket Power 4 kw

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Steering cylinder: stroke 198 mm -Piston rod: Ø 40 mm -Recording piston rod: Ø 24 x24 mm / Ø 28 x 22 mm -Dimensions: 715/110/H115 mm -Weight: 12.8 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 40 mm -Piston rod: Ø 25 mm -Stroke: 142 mm - Universally applicable: -Quantity: 1 available -Price: per piece -Dimensions: 425/60/H60 mm -Weight: 4.7 kg

Ham press Erhard approx. 120 liters capacity, completely in stainless steel, compressed air operated, with intermediate boards and stainless steel brackets, Dimensions LxWxH approx. 107x59x99cm, weight approx. 180kg, good used condition, works perfectly

chuck diameter, mm 7100 (8000) Max. work piece diameter, mm 8000 Max. work piece height, mm 3200 Max. work piece weight, kg 125000 Chuck speed, rpm 0,22...20,1 Max. ram movement of vertical support, mm 2000 Max. movement of vertical, mm 4275 Support feed range, mm/min 0,0352...285 Support rapid feed, mm/min 2500 Supports possible work angle, deg. -15...+40 Jaws, units 4 Machine overall dimensions, mm 8615 x 17600 x 9800 Machine weight, kg app. 247300

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: approx. Ø 80 mm -Piston rod: Ø 50 mm -Piston rod mounting: 2x Ø 35 mm -Stroke: 150 mm -Dimensions: 780/205/H135 mm -Weight: 33.6 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Piston: approx. Ø 50 mm -Piston rod: Ø 36 mm -Thread on piston rod: 2x M 27 -Stroke: 160 mm -Dimensions: 695/140/H120 mm -Weight: 17 kg

Boekels EWK 1500 PLUS WS1,25kSD inline checkweigher with reject device, weight range up to 1500 g (working weight up to 1250 g), calibration value e=0.2 g, accuracy +/- 0.2 g, belt width approx. 150 mm, length of infeed belt approx. 300 mm, length of outfeed belt approx. 300 mm, length of weigh cell approx. 300 mm, belt speed up to. 0.5m/s, capacity up to 100 weighings per minute, electrics 230V/50Hz, connected load 600 VA, machine floor space approx. 1050 x 1020 mm (WxD), machine height approx. 1700 mm, machine net weight approx. 245 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 75 mm -Piston rod: Ø 40 mm -Stroke: 120 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 485/105/H105 mm -Weight: 11 kg

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 105 mm -Max. trolley speed 30 m/min -pusher with 6 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 40 mm -Piston rod: Ø 25 mm -Stroke: 100 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 355/80/H50 mm -Weight: 3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston Ø: approx. 80 mm -Piston rod: Ø 32 mm -Stroke: 148 mm -Number: 2x available -Price: per piece -Dimensions: 600/135/H135 mm -Weight: 13 kg

Bottle filler, make BKM, type: Varifill 40/10K/10PP-100, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, built 1994.

table diameter: 200 mm workpiece height: 100 mm number of wheels: 1 Control: Robot CNC total power requirement: 6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - F ...

Hydraulic pump, oil pump, gear pump -Shaft holder: Ø 18 mm -Length: 35 mm -Dimensions: 215/153/215 mm -Weight: 6.8 kg