used CUCCHI db

Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: DBM/DBMF Design: Surface loading magazine or bundle loading magazine diameter range: 6-67mm DB-EVO at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the machine. Bar loaders DBM/DBMF are mounted on rails, so that they can be easily separated from the machine at any time by unlocking them on the machine for changing feed grippers and cleaning work. These magazines do not require bar tubes on the machine and are bolted directly to the machine (see pictures). It is possible to work in automatic mode as well as in manual mode. In the event of any malfunctions, the magazine can be used as a conventional bar guide tube. This eliminates machine downtime if service technicians are requ ...

Bar loading magazine for multi spindle automatic lathe Schütte SG18, factory new Special offer! Test phase on your machine in D/A/CH/BeNeLux possible! Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Schütte SG18 Type: DBM 21/36 Design: lateral loading magazine / integral loading magazine Yob: 2021 length of bars: 33000mm Total length: approx. 3680mm Bar stock: approx. 680mm Optimized loading time (modification to Schütte may also be required) 12-14 seconds (total loading time). There are several pieces brand new and immediately available. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

loading magazine for Tornos SAS16, like new -unique offer- This loading magazine CUCCHI GIOVANNI Mod. DBM 17/36 is built for use on a Tornos SAS16, but only used ½ year. The year of manufacture of the loader will be 2022/23. Secure this unique offer at top conditions! bar length 3,30 m incl. remote maintenance; control voltage 24V Standard paint RAL7035 Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Wickman 5/8 + Barloader Pietro Cucchi PB20 The machine is located in Spain.

Automatic bar loading magazine for single spindle automatic lathe / short lathe, new TEST the new DB-EVO bar loader 4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request) very high speeds even with profile material Manufacturer: Giovanni Cucchi Machine type: Automatic bar loading magazine for single-spindle / short turning Type: DB-EVO Design: Surface loading magazine or bundle loading magazine diameter range: 20-110mm DB-EVO at a glance: Scope of delivery and optionally orderable functions: - oriented loading of the bar material possible (e.g. edge upwards) - optional feeding of saw cuts and short parts possible - optional - Monitoring and fault diagnosis (touch screen) - Surface magazine - Bundles and other variants possible - automatic loading of short bars - Trays for tools - low power consumption (start/stop function) - Available in versions for 1.5, 1.8, 2.5, 3.3, 4.2 and 6. ...

Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping slee ...

Article: loading magazine for Schütte AG20 Manufacturer: Pietro Cucchi Type: surface loader year of construction: 2000 for bar length 3000mm Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

for Schütte SF 32, Country of origin: Italy, Number of spindles: 6

Single-spindle bar feeder. control panel ePalm10 max. material length: 3,300 mm max. material diameter: 52 mm feeder width 830 mm feeder length 4,650 mm weight 1,500 kg Centering inserts can be purchased for the feeder: 28.5 mm 35 mm 38.1 mm 48 mm and clamping mandrels for diameters: 38 mm 31.9 mm 25.7 mm

Technische Daten: - Spitzenweite 1300 mm - Spitzenhöhe 220 mm - Motor 2,2 PS / 400 V - Drehzahlen 500/1000/1950/2800 Upm. - M33 Spindelaufnahme - MK 2 Aufnahme des Reitstocks und der Hauptspindel - Abmessungen L=2150, B=480, H=1330 mm - Gewicht 220 kg inklusive: - Kopiervorrichtung - Planscheibe 220 mm - Schraubenfutter - Spundfutter FI 48 mm - Vierzackmitnehmer 40 mm, MK 2 - Zahnkranzbohrfutter 3-16 mm - Aufnahmedorn B 16MK2 - Rollkörner MK2 - große Handauflage mit Schnellfixierung und stufenloser Höheneinstellung

mit Frequenzumformer Technische Daten: - Spitzenweite 1300 mm - Spitzenhöhe 220 mm - Motor 2,2 PS / 400 V - Drehzahlen stufenlos regelbar 0-3000 Upm. - M33 Spindelaufnahme - MK 2 Aufnahme des Reitstocks und der Hauptspindel - Abmessungen L=2150, B=480, H=1330 mm - Gewicht 220 kg inklusive: - Kopiervorrichtung - Planscheibe 220 mm - Schraubenfutter - Spundfutter FI 48 mm - Vierzackmitnehmer 40 mm, MK 2 - Zahnkranzbohrfutter 3-16 mm - Aufnahmedorn B 16MK2 - Rollkörner MK2 - große Handauflage mit Schnellfixierung und stufenloser Höheneinstellung

Technische Daten: - Spitzenweite 1500 mm - Spitzenhöhe 220 mm - Motor 2,2 PS / 400 V - Drehzahlen 500/1000/1950/2800 Upm. - M33 Spindelaufnahme - MK 2 Aufnahme des Reitstocks und der Hauptspindel - Abmessungen L=2150, B=480, H=1330 mm - Gewicht 230 kg inklusive: - Kopiervorrichtung - Planscheibe 220 mm - Schraubenfutter - Spundfutter FI 48 mm - Vierzackmitnehmer 40 mm, MK 2 - Zahnkranzbohrfutter 3-16 mm - Aufnahmedorn B 16MK2 - Rollkörner MK2 - große Handauflage mit Schnellfixierung und stufenloser Höheneinstellung

8-colours web width 342.6 mm 9 printing stations, 8 for watercolours straight toothed 1 UV (glue) station redeveloped and further expanded for printing on packaging monofilm from 30" expanded and further expanded for printing on adhesive label material up to 200 Ceramic anilox cylinder, for 120/18 to 140/10 140/17, 160/15, 180/12, 95/15, 200/5, 255/10, 300/10, 315/11, 345/8, 500/17 Colouring roller for full-surface colouring Cutting device for longitudinal sections Etc. Still in operation: Yes Available: immediately

8-color web width 342,6 mm 9 print clambs, 8 for water colour 1 UV glue clambs for packing-Monofolie up 30µ for printing of pressure-sensitive label material bis 200µ Ceramik-Aniloxcylinder, for 120/18 bis 140/10 140/17, 160/15, 180/12, 95/15, 200/5, 255/10, 300/10, 315/11, 345/8, 500/17 Inking roller for full-size inking with cutting for slitting etc. Still in operation: Yes Available: sofort

Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic labeller for the application of one vignette label on the upper panel of carton. Mechanical speed 400 cartons per minute

Stock # 5157 Rexroth Proportional Valve DBETR-10/80 +Valve 00376046 No. 46 LFA16 DBETR-62 + 88013466 used Demag spare part

Duplo DBM System 4000 of 2005 A Collator 2x. Towers 10x. Feeder / System 4000 Coming with ; 20x. Feeding With Electronic & Automated Settings ! 1x. DBM 4000 Station 2x. Stitching Heads + 1x. Folding System AUTOMATIC SIZE Settings 1 Post Guillotine With Band Delivery Size 35 x 50 cm 9ubdu0t0 Signature format Max 350 x 500 mm Minimum 140 x 200 mm From 40 to 350 grm2 Condition ; In VERY Good condition, Immediately available

Counting and banding machine ATS US 2000 FSB-DBN-T; State as is; should be installed by ATS Customer Service; suitable for processing banknotes; Rontech MF-360 RAV counting feeder; 1x Banderolier ATS US 2000 AD bandwidth 40mm and frame 260x260mm; 1x Banderolier ATS US 2000 AD Bandwidth 30mmund Frame 260x120mm; Turning unit installed. Count and banding machine ATS US 2000 FSB-DBN-T; condition as is; should be installed by the support of ATS; used for banknotes; count feeder Rontech MF-360 RAV; 1x banding machine ATS US 2000 AD with band width 40mm and frame 260x260mm; 1x banding machine ATS US 2000 AD with band width 30mm and frame 260x120mm; turning station.

Stock# U2415-1 Used stainless steel conical mixer by Hosokawa Milacron model DBXE-300R. Total volume 798 l, working volume 300 l. Mixer has top mounted stainless steel unsupported mixing screw, driven via gearbox and el. motor 2.2 kW. Rotating arm is designed in carbon steel and is driven via gearbox and el motor 0.18 kW. Bottom central discharge via outlet with diameter 200 mm and manually operated slide valve. Machine is mounted on three carbon steel legs and is equipped with local control panel. Last time machine had been working in food industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.

Debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 Process control controller: yes weight: 700 kg voltage: 400 V 3/N current consumption: 63 A - With an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - Controllable cooling housing with autom. ball valve - Automatic exhaust damper - Automatic exhaust flap - Monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor.

Kaeser DB130 15 kW

Professional strapping machine with frame internal dimensions of approx. width 870 x height 610 mm from a renowned manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated bobbin changing and threading system. -Equipped with ergonomic castors on the table surface. -Strapping can alternatively be triggered by hand switch or foot switch. -Up to approx. 20 straps per minute. -Bandwidth 12 mm. -Strap tension infinitely adjustable. -Fully automatic tape threading and tape weft monitoring. -Closure type: Welding using the hot wedge method. -Electronic temperature control. -The machine can be pushed and fixed via castors. The machine can be demonstrated under electricity.

Professional strapping machine with frame internal dimensions of approx. width 870 x height 610 mm from a renowned manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated bobbin changing and threading system. -Equipped with ergonomic castors on the table surface. -Strapping can alternatively be triggered by hand switch or foot switch. -Up to approx. 20 straps per minute. -Bandwidth 12 mm. -Strap tension infinitely adjustable. -Fully automatic tape threading and tape weft monitoring. -Closure type: Welding using the hot wedge method. -Electronic temperature control. -The machine can be pushed and fixed via castors. The machine can be demonstrated under electricity.

This is a pressure cooker from the premium manufacturer Elro, type DBGN33-EDS-90 from the Metatherm series (latest version), built in 2021 by professionals for professionals. Ideally suited for production kitchens for continuous operation at full load. An absolute premium product in commercial kitchen technology and stands for the highest quality and durability. The material properties are almost indestructible and it is always worthwhile to replace wear parts. This high-quality roaster is equipped with the Elro Quick Cook Select control, which allows for the simplest operation. The Braisiere is in an absolutely unused condition. Device is mounted on feet. The device has been tested in our in-house specialist workshop and provided with the necessary inspection work. There are also more Elro devices coming and coming soon. The price quoted is net plus 19% VAT. Our used equipmen ...