1 ROTOX window production machines for plastic windows used machines

Year: 2009 - technically efficient, ready to work – after full service - discs: 500 mm - working length: 3700 mm - PC control (Windows XP) - online access - vertical and horizontal pneumatic clamps - automatic disc guards - roller feeder - support for longer profiles

Speeds: 6000 or 12000 rpm Processing: Steel or aluminium profiles Country of origin: Germany

Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 12,000 revolutions per minute 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg

Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 2 speeds, 6,000 or 12,000 revolutions per minute can be preselected, so that both steel and aluminium profiles can be machined 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg

Year: 2010 technically efficient, ready to work – after full service rotary table (3-sided profile machining) cooling and lubrication system copying template compressed air preparation station pneumatic clamps (4 vertical and 2 horizontal)

Offer 26048 Technical data: - 3 sides – machining in one clamping for lock and PZ punches, - etc. to be milled out in aluminium / plastic / steel profiles - Operation via two-hand lever - Material clamping by pneumatic clamping cylinder - Manual profile bar turning device for 3-sided machining - Working range - x (landscape) 250 mm - depending on position - y (longitudinal) 90 mm - depending on position - z (vertical) 120 mm - max. Profile height depending on position approx. 120 mm - max. Profile depth 100 mm - Spindle speed approx. 6000 + 12000 rpm - Pneumatic connection 8 bar - Drive 400 V / 1.5 kW - Space requirements approx. W 650 x H 1550 x D 850 mm - Weight approx. 340 kg

Double head saw EMMEGI NORMA 400 TU/4 Screwing unit GEVO SE1-SA Double head welding machine URBAN AKS 1200 Single head welding machine PRESSTA EISELE APOLLO End milling machine HAFFNER AF 362 Drain slot milling machine ROTOX FWS 380 Copy router STB F130/S Corner cleaning machine STB WP-OF2 Glazing bead saw HAFFNER GL 172

- technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed

A Rotox lock and copy milling machine including a small manual Dalex spot welding machine is available. Profile width: 125mm, profile height: 50mm, milling dimensions X/Y: 265mm/125mm, vertical/horizontal spindle speed: 12000rpm/9000rpm, machine dimensions X/Y/Z: 750mm/700mm/1700mm, weight: approx. 200kg. On-site inspection is possible.

Profile width min./max.: 50mm-130mm, profile height min./max.: 50mm-115mm, max. notching depth: 40mm, max. cutter diameter: 180mm, machine dimensions X/Y/Z: approx. 1000mm/1000mm/1250mm, weight: approx. 300kg. On-site inspection is possible.

A Rotox lock case milling machine with multi-spindle milling unit is available. Travel vertical/horizontal: 265mm/125mm, max. profile width: 125mm, max. profile height: 50mm, speed: 9000rpm, machine dimensions X/Y/Z: approx. 750mm/700mm/1700mm, weight: approx. 200kg. On-site inspection is possible.

Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels

Rotox KF 347 copy and lock milling machine, year of manufacture: approx. 1992, speed: 12000rpm, machining dimensions X/Y/Z: 315mm/130mm/200mm, max. workpiece cross section X/Y: 200mm/100mm, machine dimensions X/Y/Z: approx. 1300mm/850mm/1650mm, weight: approx. 350kg. An on-site inspection is possible.

Sturtz welding and cleaning line Left-to-right direction SE-HSM-30/26 Compact 0.2mm 3000x2600mm P-260-WST 4AS-JC WST 25

Year: 2015 - technically efficient, ready to work – after full service - working dimensions: 2800 x 1350 mm - tilting stop pins - pneumatically tilted - sliding/brush strips - pneumatic gun DGS 3100 - pneumatic screw feeder ASS 60

Year: 2008 - technically efficient, ready to work – after full service - chiseling up + down - PLC control - feeding table

Year: 2006 technically efficient, ready to work – after full service 3-spindle (high-speed motors) possibility of setting for various profiles (frame / sash) pneumatic profile clamping

Year: 2007 - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers

URBAN AMS 6010 very good condition fully operational

Year: 2006 - technically efficient, ready to work – after full service - possibility of mounting 3 milling heads - top and bottom chiseling - control via PLC - automatic machining process

Year: 2000 - technically efficient, ready to work – after full service - 4 heads - support arms

Year: 2007 - technically efficient, ready to work – after full service - disc cutter: 250 mm - 4 CNC axes - working height: 200 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/outfeed table

Year: 2006 - technically efficient, ready to work – after full service - 2 pneumatic motors (top + bottom) - disc cutter: 250 mm - 2 CNC axes - working height: 140 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/Outfeed table

Year: 2018 technically efficient, ready to work – after full service hydropneumatic head feed with automatic profile height measurement automatic zeroing after the end of the work cycle double vertical and horizontal pneumatic clamps minimum internal pack dimension: 450 mm maximum internal pack dimension: 2740 mm

technically efficient, ready to work - after full service bar spacing: 100 mm dimensions: 265 x 265 cm height: 150 cm weight: 350 kg